S/R to R.I. Office-cum-Residence at Khireitangiri for the year 2025-26

Earthwork in ordinary soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm ot 7cm and laying in layers not exceeding 0.3m depth with cost of all labour T&P etc complete as per the direction of Engineer-in-Charge as per the approved specification.

Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision) complete as per direction of the Engineer-in-charge.as per direction of the Engineer-in-Charge as per approved specification.

Cement concrete (1:3:6) using 40mm size B.H.G C.B chips lauingin layers not exceeding 150mm ramming in rammer,watering and curing etc. complete as per the direction of Engineer-in-Charge as per the approved specification..

Brick work with Flyash bricks 23cm x 10cm x 8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Foundation & Plinthwith portlabd slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. inclduing cost, conveyance, taxes, royalites, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-Charge as per approved specification.

Brick work with Flyash bricks 23cm x 10cm x 8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Super structure with portlabd slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. inclduing cost, conveyance, taxes, royalites, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-Charge as per approved specification.

16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland stag cement (IS 455) with inclduing raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-Charge including cost of all materials, conveyance loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-Charge as per approved specification.

Finishing walls with water proofing Weather coat paint of approved shade two coats to give an even shade including cost of all materials etc. complete as per direction of the Engineer-in-Charge as per approved specification

Distempering one coat to walls with distemper of approved said on new work to give an even said including cost of distemper etc. complete as per direction of the Engineer-in-Charge as per approved specification

Painting two coats over a cost of primer on M.S. shutters and grill work with any approved enamel paint including cost of all materials etc. complete as per direction of the Engineer-in-Charge as per approved specification

Providing and laying of Interlocking Concrete Block pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504 as per direction of the Engineer-in-Charge as per approved specification

Supplying, Fitting and fixing M.S. door and windows with cost, conveyance and taxes etc. complete as per direction of the Engineer-in-Charge as per approved specification