10924-31 dated 30/01/2026

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification 2014 clause 302 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within any lead .ithin all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry and all saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material within any lead .ithin all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying in position cement concrete 1:5:10 (one cement : five coarse sand): ten graded stone aggregate 40 mm ( forty millimetre ) nominal size of specified grade) excluding the cost of centering and shuttering and curing complets including entire carriage of material within any lead .ithin all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying in position cement concrete 1:5:10 (one cement : five coarse sand): ten graded stone aggregate 40 mm ( forty millimetre ) nominal size of specified grade) excluding the cost of centering and shuttering and curing complets including entire carriage of material within any lead .ithin all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying in position cement concrete of specified grade mechanically mixed cement concrete 1:3:6 (One cement: three sand:six graded/crushed stone aggregate 20mm (twenty millimetre) nominal size) as per specification and curing complete but including cost of form work in all work up to plinth level including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other including entire carriage of material through all mode of transporations within any lead .ithin all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying in position cement concrete of specified grade mechanically mixed cement concrete 1:4:8 (One cement: four sand : eight graded/crushed stone aggregate 40mm (forty millimetre) nominal size) as per specification and curing complete but including cost of form work in all work up to plinth level including all heights/depths including entire carriage of materialwithin any lead .ithin all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying in position cement concrete 1:6:12(one cement : six coarse sand): twelvegraded stone aggregate 40 mm ( forty millimetre ) nominal size of specified grade) excluding the cost of centering and shuttering and curing complets including entire carriage of material within any lead .with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying mechanically mixed and vibrated cement concrete for reinforced concrete in substructure in foundation and plinth reinforced cement concrete grade M-25 (M-Twenty five) design mix upto minium cement contents 400(four hundred ) Killograme per Cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification clause 802, 804,806,807, 1202 and 1204 as per direction of Engineer-in-Charge including entire carriage of material within all leads and with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents not less then 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing including entire carriage of materialswith in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 1:1.5:3 (One cement : one and half coarse sand : three graded stone aggregate 20mm(twenty millimetre) nominal size) up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (one Cement : three coarse sand)including cost of required Centering complete including entire carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing, hoisting and fixing above plinth level up to floor five level reinforced cement concrete in mouldings as in cornices, windows sills etc,including setting in cement mortar 1:3 (one cement : three coarse sand) including cost of required centering, shuttering but, excluding the cost of reinforcement, with1:1.5:3 (one cement : one and half coarse sand: three graded stone aggregate 20 mm(twenty millimetre)nominal size)including entire carriage of material through all mode of transporations with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Government excluding GST.

Supplying, fitting, and placing HYSD bar reinforcement (Fe 500D) in substructure/ foundation and plinth made of SAIL/TISCO/ TATA/SHYAM/RINLsteel reinforcement for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding in foundation complete including the cost of binding wire all complete above plinth level upto all floor levels including entire carriage of materialswith in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

In foundation,footings bases of columns etcetera for mass concrete.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

In foundation,footings bases of columns etcetera for mass concrete.

In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

In columns, pillars,piers, abutments posts and struts square rectangular or polygonal in plan upto all floor level.

Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level.

In edges of slabs and breaks in floors and walls under any width/ height upto all floor level.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in in cement mortar 1:6 (one cement : six sand) curing complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation up to plinth level l in all shapes and sizes in in cement mortar 1:6 (one cement : six sand) curing complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Half brick masonry with common burnt clay F.P.S. (non modular) of class designation 7.5 in Cement Mortar 1:4 (One cement: four sand) and curing complete in super structure above plinth level upto all floor level including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Half brick masonry with common burnt clay F.P.S. (non modular) of class designation 7.5 in Cement Mortar 1:3 (One cement: three sand) and curing complete in super structure above plinth level upto all floor level including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

15mm (fifteen millimeters) cement plaster in single coat on the rough side of brick/ concrete/ stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) as per the direction of Engineer-in-Charge including carriage of materials within all leads, and lifts other incidentalsincluding carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

12mm (twelve millimeters) cement plaster in single coat on the rough side of brick/ concrete/ stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) as per the direction of Engineer-in-Charge including carriage of materials within all leads, and lifts other incidentalsincluding carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

stone filling behind retaining walls with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Cement concrete flooring 1:2:4 (One cement : Two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm ( forty millimetre ) thick with 20 mm ( twenty millimetre ) nominal size stone aggregate with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing weap holes in brick masonry/ stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full with of the structures with slope of 1(v):20 (H) towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7. with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (one cement: two coarse sand): four graded stone aggregate 12.5mm ( twelve point five millimetre )nominal size)with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (VG -Ten) of approved quality using 1.7kg(one point seven killograme) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Finishing walls with water proofing cement paint of required shade (Two or more coats applied @ 3.84 kg/10 sqm) ( three point eight four kilogram per ten square metre) as per the directions of Engineer-in-Charge including entire carriage of material through all mode of transporations with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately.Second class deodar wood with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 35 mm ( thirty five millimetre )thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of: (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade 1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT-I, conforming to IS: 3087, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre- laminated conforming to IS: 12823, Grade 1, Type- II marked : with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 6 mm thick double glass unit (10mm thick cavity), including ISI marked M.S. pressed butt hinge bright finished of required size with necessary screws. 40mm thick 1st class deodar wood OPENABLE SHUTTER with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four millimetre) in both directions with wire of dia 0.63 mm(zero point six three millimetre) for doors, windows and clerestory windows with hinges and necessary screws : 35 mm (thirty five millimetre) thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size First class deodar wood. including carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Provding and fixing M.S grills of required pattern in wooden frames of windows etc with M.S flats, square or round bars with round headed bolts and nuts or by screws plain grill including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing glazing for doors, windows and clerestory windows using 6mm double glass sheet, including fixing and finished of required size with necessary screws. Fixed shutters with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including entire carriage of materialwith in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

150x10mm (one hundred fifty into ten millimetre) nominal size

150x10mm (one hundred fifty into ten millimetre) nominal size

100x10mm (one hundred into ten millimetre) nominal size

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

125 mm (one hundred twenty five millimetres)

100mm (one hundred twenty five millimetres)

75 mm (one hundred millimetres)

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete: 115 mm with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 150(One hundred fifty) millimetres M.S. bright finsihed hard drawn hooks eyes brass including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 19 mm (ninteen millimetres ) thick water proof termite resistant commercial board box including shelves and shutters, the back side cup board / cabinet shall be 8 mm thick ply and all the cut portions of shelves shall be finished with 6 mm thick hard wood edging. The cut portion of shutters from all sides shall also be finished with 12 mm (Twelve millimetres ) thick hard wood edging. The shutter from out side shall be finished with 4 mm ( four millimetres ) thick vaneer Ply of approved shade to match with panelling including stainless steel hinges hinges and magnetic catcher with in all accessories etc. complete as per detailed drawing as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing vitrified floor tiles 30x60 cm ( Thirty into sixty centimetres) made of RIA/NITCO/SOMANY/ORIENT/RAK/JOHNSON & JOHNSON of approved Shade and manufacturer in skirting, risers of steps and dado with 12 mm(Twelve millimetres ) thick cement mortar 1:4(one cement :four sand) and jointed with cement slurry all leads and lifts and carriage of material including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing vitrified floor tiles 30x60 cm ( Thirty into sixty centimetres) made of RIA/NITCO/SOMANY/ORIENT/RAK/JOHNSON & JOHNSON of approved Shade and manufacturer in skirting, risers of steps and dado with 12 mm(Twelve millimetres ) thick cement mortar 1:3(one cement :threr sand) and jointed with cement slurry all leads and lifts and carriage of material including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying 10mm (ten) millimetres thick Antiskid Full Body vitrified matt finish floor tiles of Size 600x600 mm(six hundred into six hundred)millimetres of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / ORIENT BELL / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved make, olours and shades, laid on 20mm (twenty) millimetres thick cement mortar 1:3 (one cement : three coarse sand) with 3 mm (three millimetre) groove jointing with epoxy grout of matching pigment complete including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying Ceramic glazed floor tiles of size 30 x 60 cm ( thirty x sixty centimetre ) , with water absorption less than 0.08 % and conforming to I.S.15622, of approved shade of Kajaria / Orient Bell/ NITCO/ SOMANY of in skirting / Dado laid over 12 mm ( twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including entire carriage of material through all mode of transporations with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Government excluding GST.

Providing and fixing Digital Ceramic glazed floor cm ( Thirty into sixty centimetres) made of KAJARIA/NITCO/SOMANY/ORIENT/RAK/JOHNSON & JOHNSON of approved Shade and manufacturer in skirting, risers of steps and dado with 12 mm(Twelve millimetres ) thick cement mortar 1:3(one cement :three sand) and jointed with cement slurry all leads and lifts and carriage of material including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 18 mm ( eighteen millimetre) thick granite stone of approved shade gang saw cut,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc .complete at all levels: including entire carriage of material through all mode of transporations with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Government excluding GST.

Providing and fixing 0.60mm(zero point six zero millimeters) thick prepainted steel sheet sand-wich puff roofing, TATA/ SAIL/ JSW made of cold rolled steel coil with epoxy coating of 25(twenty five) micron having a puff depth of 50mm (fifity millimetres) and weight of puff should be 35-37 (thirty five -thirty seven) kg per cu.m. steel frames are to be painted of approved shade and gap between wall and the roof at the base point to be closed with autoclaved cellular aerated blocks and to be plastered from both sides (cost of autoclaved cellular aerated blocks and to be paid for separately), i/c fixing the sheets with self drilling and self tapping galvanised or zinc alloy coated fasteners of size 5.5mm (five point five millimetres) Dia and 55mm (fifty five millimitres) length with EPDM seal. Test certificate and 40 (forty) years warranty against color fading and manufacturing defects including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing prepainted ridges or hips 90 cm (Ninety centimeter) TATA/ SAIL/ JSW overall with 0.60 mm (Zero point six zero millimeter) thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat or regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with preprinted iron J or L hooks, bolts & nuts 6mm(Six) millimeter dia and preprinted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing valleys 60cm (Sixty centimetres) (overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/ SAIL/ JSW Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with serews prepainted iron J or L hooks bolts and nuts 6mm (Six millimetres) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required in all heights upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing of 40 cm (forty centimetre) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (one cement: three coarse sand). 1.00 mm(one millimetre) thick with zinc coating not less than 275 gm/m²(two hundred seventy five grame) with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 15cm ( Fifteen centimetres)_ wide, 45 cm (forty five centimetres) overall semi-circular plain G.S. sheet gutter TATA/ SAIL/ TISCO with iron brackets 40x3mm (forty into three) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA/ SAIL/ JSW make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Steel work welded in built up sections,, made of TATA, SAIL,in trusses and framed work including cutting hoisting, fixing in position using structural steel etc. as required in Grating frames, guard bar, ladder railing, brackets, gates and similar work. and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing on wall face100mm dia (one hundred milimeters dia) PVC rain water pipe made of SUPREME/ D.PLAST/ASTRAL/FINOLEX rain water pipes of working pressure not less than 4.50(four point five zero)kilogram per square centimeter including filling the joints with approved adhesive complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipe of make SUPREME/ ASTRAL/FINOLEX make by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( one cement : four sand) and making good the wall etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

110 mm (one hundred ten millimeters) dia. (coupler )

110 mm (seventy five millimeters) dia. (bend)

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm ( fifteen millimetre) diameter and weighing not less than 440 grams. ( four hundred forty grams) including entire carriage of material through all mode of transporations with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Finishing walls with water proofing cement paint of required shade (Two or more coats applied @ 3.84 kg/10 sqm) ( three point eight four kilogram per ten square metre) as per the directions of Engineer-in-Charge including entire carriage of material through all mode of transporations with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

white washing with lime to give and even shade new work three or more coat.with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

colour washing such as green and blue to give and even shade new work two or more coat. With abase coat of white washing with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Distempering two or more coats with oil bound washable distemper of approved brand and manufacture of required shade over and including water thinable priming coat with cement primer on undecorated wall surface to give an even shade after thorolly brushing the surface approved brand and manufacture of ASIAN/BURGER/JONSHAN & JONSHAN after thoroughly brushing the surface clean of all gleese,dirt,loose,pices scales and also including preparing the surface even and sand papered smooth upto all floor level in all heights including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 ( fifty ) grams/ litre after thoroughly brushing the surface clean of all gleese,dirt,loose,pices scales and also including preparing the surface even and sand papered smooth including entire carriage of material through all mode of transporations with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Wall painting (two coats) with acrylic emulsion paint of ASIAN TRECTOR /NEROLAC/BURGER of approved brand and manufacture having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams per litre for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and applying white cement based putty of average thickness 1 mm (one millimeters) of approved brand Birla white, Putty/ J.K. wall puttyand manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.after thoroughly brushing the surface free from mortar droops, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete upto all floor levels in all heights/ depth including entire carriage of material through all mode of transporations with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , or other taxes imposed by the Government excluding GST.

Providing and laying factory made chamfered edge 60mm ( sixty millimetres) thick Pre- Polished cement concrete paver block of M-40 (M-forty) grade of NTC/ UNISTONE/NITCO/GICO/MODERN (DELHI) make with approved color design and pattern.in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (fifty millimetres) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete including all leads and lifts and carriage of material including carriage of materials with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (one cement: one fine sand) including testing of joints etc. complete : 250 mm (two hundred fifty millimetres ) diameter with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying cement concrete 1:5:10 (one cement: five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) Half Round S.W. pipes with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing G.I .pipes complete wih G.I fitting including tranching and refilling extra. External works.with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

15 mm (fifteen millimetres) nominal bore 9heavy duty)

20 mm (twenty millimetres) nominal bore 9heavy duty)

32 mm (thirty two millimetres) nominal bore 9heavy duty)

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five to forty millimeters) nominal bore including entire carriage of material through all mode of transporations with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter to be paid separately) including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providng and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) of 25 mm (twenty millimeters) nominal bore of ZOLOTO including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes the cost of cutting chases and making good the sameincluding testing of joints complete as per direction of Engineer-in-Charge. with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

PN - 2025Pipe, 25mm OD (SDR-7.4)

PN - 1620 Pipe, 20mm OD (SDR-7.4)

PN - 1216 Pipe, 16mm OD (SDR-7.4)

Providing and fixing white vitreous china pedestal type water closet (Indian type W.C. pan) with seat and lid, No. CASCADE NXT C0207 universal type water closet 570x460x380mm ( Five hundred seventy into four hundred sixty into thre hundred eighty millimeters) in white shade of Hindware or CERA or PERRYWARE with 10 (ten) litre low level snow white P.V.C. Twin flushing cistern of COMPASS Cat. No. S1053106 "S" trap with ceranglo deluxe seat cover of snow white shade of CERA/ JACQUAR(with fittings, accessories and flush pipe), with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handlelever )conforming to IS: 7231, with all fittings and fixtures complete. 10 litre (ten litre) capacity White with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing wash basin CAT. NO-1002 of 55 x 40 cm ( fifty five x forty entimetre ) of OF Cera/ Smnay/Perryware make in white shade with C.I. brackets, 15 mm ( fifteen millimetre) C.P. brass pillar taps, 32 mm ( thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including entire carriage of material through all mode of transporations with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing Stainless Steel A ISI 304 (18/8) (eighteen/ eight) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimeters) including painting of fittings and brackets, cutting and making good the walls wherever required : Sink No. REK 1916 of overall size 480x405mm (four hundred eighty into four hundred five millimeters) of Diamond sinks including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 32 mm (thirty two millimeters) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including entire carriage of materialwith in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass (ENOTICA)of approved quality complete with 6 mm (six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing bib cock with wall flange of FLP-5037 PM complete in all respect including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing nose bib cock with wall flange of FLP-5037 PM complete in all respect including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 15mm (Fifteen millimetres ) dia CP. brass angle valve of KINGSTON /PARKO / TECHNO JAL JAQUAR / GE M/ ESS / SEIKO make of without Nuts and pipe. including entire carriage of material through all mode of transporations with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing soap Dish Holder ACN-1131 N of JAQUAR including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing flexible connection pipe with brass unions : 45cm (forty five centimeters) length 15mm (fifteen millimeters) nominal bore of FINOLEX/SUPREME/JAQUAR including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

15mm (fifteen millimeters) nominal bore

20mm (twenty millimeters) nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of SINTEX of three layers IS : 12701 marked, having capacity of 1000(One thousand) litres with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank in all respect including hoisting upto all floor level above ground level including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing 15mm (fifteen millimeters) nominal bore ball valve (brass) of ZOLOTO High or low pressure, with plastic floats complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Finolex/Supreme/Astral make or equivelent ISI marked working pressure not less than 4.5(four point five)kilogram per square centimeter including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

110 mm (one hundred ten millimeters) dia.

150 mm (one hundred fifty millimeters) dia.

Providing and fixing 110 mm X 90 mm (one hundred ten into ninety millimeters) make SUPREME/ ASTRAL/FINOLEX pvc floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing PVC door bend with oval access door insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts SUPREME/ ASTRAL/FINOLEX make complete including fixing with approved adhesive etc. complete including entire carriage of materialwith in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

150 mm (one hundred fifty millimeters) dia.

110 mm (one hundred ten millimeters) dia.

Providing and fixing a PVC plain bends ISI marked of SUPREME/ ASTRAL/FINOLEX make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

150 mm (one hundred fifty millimeters) dia.

110 mm (one hundred ten millimeters) dia.

Providing and fixing PVC double equal branch with oval access door of SUPREME/ ASTRAL/FINOLEX make with insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and fixing PVC single equal branch with oval access door of SUPREME/ ASTRAL/FINOLEX make with insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

150 mm (one hundred fifty millimeters) dia.

110 mm (one hundred ten millimeters) dia.

Providing and fixing PVC coller ISI marked including fixing with approved a dhesive ets complete. with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

110 mm (one hundred ten millimeters) dia.

150 mm (one hundred fifty millimeters) dia.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc.complete. with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

110 mm (one hundred ten millimeters) dia.

Constructing brick masonry circular type manhole with common brunt clay F..P.S (non Modular)class designation 7.5 (seven point five) bricks , 0.91m (zero point nine one metre) deep with S.F.R.C. cover and frame (heavy duty, HD-20(twenty) grade designation) 560mm (five hundred sixty millimeters) internal diameter con- forming to I.S. 12592, total weight of cover and frame to be not less than 182 kg.(one hundred eighty two killogramme) fixed in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimeters) nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm (twelve millimeters) thick cement plaster at the external surface shall be paid for separately) 0.91 m (zero point nine one metre) internal dia at bottom and 0.56m (zero point five six millimeters )dia at top in cement mortar 1:4 (one cement : four coarse sand), inside cement plaster 12 mm (twelve millimeters ) thick with cement mortar 1:3 (one cement : three coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (one cement :three coarse sand : six graded stone aggregate 40mm (forty millimeters) nominal size, and making necessary channel in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimeters) nominal size) finished with a floating coat of neat cement, all complete as per standard design including centering, shuttering all complete excavation, foot rests and 12mm (twelve millimeters ) thick cement plaster at the external surface shall be paid for separately) including entire carriage of material with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Light duty) 450x610 mm internal dimentions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):

Making soak pit 2.5 m diameter 3.0 metre (thirty metre)deep with 45 x 45 cm (forty five into forty five centimetre) dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm (hundred millimetre)diameter, 1.8 m(one point eight metre ) long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five)with in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Supplying cast iron cover without frame for manholes for frames of internal dimension 455x610mm ( Four hundred fifity five into six hundred ten millimetres) C.I.cover (Medium duty ) the weight of cover to be not less than 23kg(twenty three Kilogramme) including entire carriage of materialwith in all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.