Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 CrAdmitted-Finance AWAS VIKAS COLONY MELAGHAT ROAD KHATIMA UDHAM SINGH NAGAR | ₹4.7 Cr | L1 | Admitted-Finance |
| 2 | L2₹4.8 Cr+₹1.7 L (0.35%)Admitted-Finance | ₹4.8 Cr+₹1.7 L (0.35%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical bidder disqualify |
| 4 | Not Admitted-Fee/PreQual/Technical NEAR PWD CAMPUS LOHAGHAT DISTRICT CHAMPAWAT UTTARAKHAND | DEHRADUN | CHAMPAWAT | UTTARAKHAND | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Rejected-Technical | - | - | Rejected-Technical bidder disqualify |
| Sl No | Description | Qty | Unit | NANDANI CONSTRUCTION L1 | Indrapratap Constructions PVT LTD L2 |
|---|---|---|---|---|---|
| .01Note- The Contractor shall quote his/ their rates without GST. GST will be paid extra by the Department as per prevailing rate at the time of payment. | |||||
| 1.00Road Delineators / Vertical Guide Posts: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of thedelineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The elineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79. | |||||
| 1.01 | Garur Devnayi Kohina motor road | 640 | No | 1,160 ₹7,42,400 Lowest | 1,170 ₹7,48,800 |
| 1.02 | N.E.S. Block Garur motor road | 75 | No | 1,160 ₹87,000 Lowest | 1,170 ₹87,750 |
| 1.03 | Paudibend devldhar paldichina kafligair motor road | 700 | No | 1,160 ₹8,12,000 Lowest | 1,170 ₹8,19,000 |
| 2.00Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction | |||||
| 2.01 | Garur Devnayi Kohina motor road | 401.94 | Cum | 440 ₹1,76,853.6 Lowest | 440 ₹1,76,853.6 Lowest |
| 2.02 | N.E.S. Block Garur motor road | 33.82 | Cum | 440 ₹14,880.8 Lowest | 440 ₹14,880.8 Lowest |
| 2.03 | Paudibend devldhar paldichina kafligair motor road | 169.64 | Cum | 440 ₹74,641.6 Lowest | 440 ₹74,641.6 Lowest |
| 3.00Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications PCC Grade M15 Mix 1:2:5 | |||||
Tender Value
₹4.8 Cr
EMD Value
₹11.3 L
Closing Date
15 Apr 2025, 5:00 pmClosed
Superintending Engineer
Superintending Engineer 1st Circle PWD Almora
Under the Road Safety work in accident prone spots Pauri Band Devaldhar Paldichina Jhirali Motar Road (Main District Road) km. 1.00 to 9.00 and Garur Devnai kohina Motar road in block Garur and km. 1.24 of access road to N.E.S. Block Gaurd
2025_pwd_82110_1
1362/Nivida-01/2024-25 dated 26/03/2025
Open Tender
Civil Works
Item Rate
120 days
Bageshwar
As per technical bid
2 documents required · 2 mandatory
₹5,900
EE PD PWD Bageshwar
₹11.3 L
Almora
25 Apr 2025
28 Mar 2025
16 Apr 2025
28 Mar 2025
15 Apr 2025
7 Apr 2025
5 Apr 2025
Amount
Note- The Contractor shall quote his/ their rates without GST. GST will be paid extra by the Department as per prevailing rate at the time of payment.
Road Delineators / Vertical Guide Posts: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of thedelineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The elineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79.
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications PCC Grade M15 Mix 1:2:5
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 ( if Concrete Required for Vertical post Fixing will be paid extra)
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 3mm/4mm thick Aluminium composite material sheet vide clause 801.3, depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel a mild steel circular pipe 65 NB, 3.2 mm thickness, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.
600 mm equilateral triangle
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
600 mm Circular
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
800 x 600 mm Rectangle
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
600 x 450 mm Rectangle
Garur Devnayi Kohina motor road
N.E.S. Block Garur motor road
Paudibend devldhar paldichina kafligair motor road
Indrapratap Constructions PVT LTD (BID ID -374389)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.08 MB
BOQ_97891.xls
BOQ • 0.29 MB
pauribanddevaldhar.pdf
Tender Documents • 8.50 MB
Tenderdocument.pdf
Tender Documents • 8.50 MB
BOQ.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .