WBPWD/EE/PED/NIQ19_2nd Call/2024-2025

Amount

Part A- Dismantle Dismantle the existing Light fittings(Single Tube/Twin tube/Panel light etc) complete Set.

Dismantle the Celling fan (48"/56")with complete Set.

Dismatle the extra suspension down rod.if required.

Dismantle the existing compound light with loop box and other accessories.

Dismantle the DB Box SPNDB/TPNDB if necessary (.GR floor-3,1st floor-8,2nd floor-4,3rd floor- 8)

Dismantle the TPN SFU (125A/200A/315A) wih cpomplete Set if necessary

Dismantle the Outdoor unit with complete Set include copper pipe,outdoor stand with carefully.

Part B- Refixing/Installation Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.125A(Make:- Siemens/L&T/Havells). [D-3/4(a)]

Supplying and fixing 415V, TPN SFU with sheetsteel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.200A(Make:- Siemens/L&T/Havells). .[D-3/4(a)]

Supplying and fixing 415V, TPN SFU with sheetsteel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 315A (Make:- Siemens/L&T/Havells). [D-3/4(a)]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 way (Make:-Siemens/Laurenz Knudson (L&T) /Havells/ABB) (D-10/4)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+14 way (Make:-Siemens/Laurenz Knudson (L&T) /Havells/ABB) (D-9/13)

Supply of 1.1kv grade Al Armoured cable 2 Core 10sq mm (Make:-Siemens/Laurenz Knudson (L&T) /Havells/ABB) (For Compound Light)

Laying of cable up to 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot-Dip) Wire, making holes etc. as necy. mending good damages and painting. (Make:- GLOSTER/POLYCAB/HAVELLS/RR)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below(F4/c) 4c 16 sq mm

2 Core x 10sq mm [F-4/7(a)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials [F-5/b(Xii)]

2 C x 10sq mm (F5/biii)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIDistribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] Avg run 10 mtr. (E-13/9(e)]

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings, etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting, and mending good damages to building works [PVC casing-capping and plug box both on the surface] on board [E-12/6(a)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)]

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (E9/c) i) 2x80/0.4 (10 sq.mm) + 1x84/0.3 (6 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.1.5 sq mm

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (D5/6) 63A FP (Make:-Siemens/Laurenz Knudson (L&T) /Havells/ABB))

40A DP (Make:-Siemens/Laurenz Knudson (L&T) /Havells/ABB)

Supplying and fixing 240/415 V MCB of Breakingcapacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection. 6-32A SP(Legrand/L&T/Havells) (D-6/7)

Supply & Delivery of Single LED Tube light fittings (make- Philips, Cat No. TMC-502 P1xT-LED 22W with 01 Nos LED TUBE Philips Cat No- Mas LED Tube 1200mm 18W 865 T8 I – 2100 lm or equivalent make and model of Bajaj/ Orient / Havells)

Supply & Delivery of twin LED Tube light fittings (make- Philips, Cat No. TMC-502 2XT-LED 22W or equivalent model of with 02 Nos LED TUBE Philips Cat No- Mas LEDTube 1200mm 18W 865 T8 I – 2100lm or equivalent make and model of Bajaj/ Orient / Havells)

Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (supplied at the time of delivered the fans ) etc. without regulator, (Make- Usha 1200MM STRIKER PWD ISI 1 STAR (Safety Wire & S3 Capacitor) Br /Orient Electric- New Breeze (5yrs warranty),1200 mm sweep; 44W; 320 rpm; 225 cmm; 3 star ac ceiling fan or equivalent make of Crompton Greaves and as per direction of EIC as per direction of EIC.

Supply of 9'' sweep AC exhaust fan (Make:- EPC heavy duty/ Usha turbo LD DBB) 1370 R.P.M. and Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) GI.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. [C-2/14(a)]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)]

Supply and Fixing 14 W LED lamp. (Make:- Philips Stellar Bright High Wattage /Bajaj / Havells)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.[E-6/18(a)]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D-14/29)]

Supply and Fixing of 250 V 50 HZ ; 450mm sweep; 90W; 1325 rpm; 110 cmm; wall fan with metal blades high flo oscillating type metal body Wall Bracket fan operated by pull cord switch with inbuilt regulator ( Make -CG/Orient Cat No- Wall Tornado II /Approved

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E-7/26)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [E-17/5(b]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E-6/22)

Supply & Fixing 240 V, 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-6/17(a)]

Re installation of Compound light with necessary connection.

Part-C Split AC Re Installation Re installation and testing,commissioning the Outdoor unit with proper copper pipe,control cable,gas connection etc.

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets (Make-Ryoku/Totaline/Jobu) (NS)

a) Liquid Line (1/4" OD with 0.8mm thick)

b) Suction Line (5/8" OD with 0.8mm thick)

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube (Accoflex/Armacell/Supreme) [Ref.: Non Schedule]

a) Liquid Line (1/4" OD with 0.8 mm thick)

b) Suction Line (5/8" OD with 0.8mm thick)

Supply and laying Control copper Cabling from the Condensing Unit to the control panel & Power socket to AC (Make: Polycab/Finolex/Gloster/RR) [Ref.: Non Schedule]

a) 3 Core 4 sq.mm communication cable.

S & L of Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors.

a) 25 mm dia

Supply and installation of 2 nos MS angel braket(50x50x6) , making holes including fixing accessories for providing condensing unit and cooling unit including mading good damages. [NS]

Supply and Charging the gas (R32/R410A/R22) required as per the outdoor machine.

Supply and Fixing outdoor copper back condenser coil(20''/30'')

Supply and Fixing outdoor copper back condenser coil(22''/32'')

Supply , Installation, testing and commissioning of 1.5TR only Outdoor Set included rating 3 star non-inverter type Back condenser copper coil, Compressor (rotary/scroll) .Refrigerant- R410/R32 outdoor . Operating outdoor temperature = 50*C and above fan motor and other accessories requisite control system for the total system /temperature/Air Distribution/Electrical power system and other like remote sensing device etc.8. Power supply-240V 50HZ (Tolerance as per applicable standard) 9. Power consumption-As per BEE Norms.10.ISSER-As per latest recommendation of BEE.11.Thr air Conditioner should have the following capacity. ( Make- Mitsubisi Electric, Model No. MU-AGZ18F/ OR equivalent make of Daikin/Hitachi/ O-General) or as per approved by EIC.

MODERN ELECTRICALS (BID ID -6111648)

SAIBAL SARKAR (BID ID -6177700)

MAHESWAR ELECTRICAL INDUSTRIES (BID ID -6172908)