Construction of Shopping Centre at NAU,Navsari.

NAME OF WORK : "CONSTRUCTION OF SHOPPING CENTRE AT NAU,

SCHEDULE-B (Civil work & Plumbing work)

No. Description of Item Unit Estimated Amount (Rs.)

Clearing and grubbing road land including

uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm

1 Hectare 0.16 84495.12

removal of stumps of trees cut earlier and disposal

of unserviceable materials(A) By manual means in

area of light jungle

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful

3 materials and disposing off the excavated stuff upto Cu.mt. 549.00 166.35

50 Meter lead.(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

4 not exceeding 20 cm. in depth consolidating each Cu.mt. 705.50 133.66

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

Filling in plinth with sand under floors including

6 watering ramming, consolidating and dressing Cu.mt. 38.00 471.70

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one

litre chemical emulsion appication at the rate of

Litre chemical / Sqm of surface is recommended as

Construction of Granular sub base in required layer

providing coarse graded material satisfying MOST

specification of grading including spreading in

uniform layer with motor grader on prepared

surface mixing by mix in place method with

rotavator at OMC and excluding compacting with

vibratory roller etc., complete as directed by E.I.C.

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

9 aggregates 20 mm nominal size) and curing Cu.mt. 148.00 3713.67

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in. Upto floor two

level Ground Floor ( A ) Foundations footings

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

11 form work and excluding the rate of reinforcement Cu.mt. 22.00 7767.91

for reinforced concrete work in. Columns Upto

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

12 form work and excluding the rate of reinforcement Cu.mt. 26.00 7889.11

for reinforced concrete work in. Columns at all floor

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete as

directed by engineer in charge. for Ground Beams

and Plinth Beams

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete as

directed by engineer in charge. for beam at all floor

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete as

directed by engineer in charge. Sill at all floor level.

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete as

directed by engineer in charge. Lintel & Coping at all

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete as

directed by engineer in charge. all floor level Chhajja

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete as

directed by engineer in charge. Plinth Slab

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete as

directed by engineer in charge. slab at all floor

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

20 for reinforced concrete work in plan for complete as Cu.mt. 7.00 7942.64

directed by engineer in charge. Upto floor two level

( B ) Walls from top of foundation level

Providing TMT Bar FE 500D reinforcement for R.C.C.

21 work including bending, binding and placing in Kg. 33978.00 77.29

position complete at all floor level.

PLINTH PROTECTION: Providing and laying Cement

Concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

aggregates 20 mm nominal size) 10cm thick having

width of 0.75m resting on brick massonary at out

side & inside by keeping 75mm bearing in plinth's

22 masonary including sand filling, finishing top surface Sq.mt. 128.00 558.53

and making false square in true line and level and

curing including cost of form work but excluding cost

of reinforcement and masonary at outside etc

complete as directed by E.I.C.

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

23 in foundation and plinth in Cement Mortar 1:6 (1- Cu.mt. 51.00 4121.55

Cement : 6 -fine sand)(B) Conventional upto Plinth

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

24 in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Cu.mt. 157.00 4444.59

Conventional at all floor level.

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-

25 coarse sand ) with 2 Nos of 6mm Mild steel round Sq.mt. 377.00 740.45

bars after every three course embedded in Cement

Mortar in foundation and

plinth (B) Conventional at all floor level.

Providing 10mm thick cement plaster in single coat

on brick/concrete walls for interior plastering upto

26 floor two level and finished even and smooth in Sq.mt. 454.00 219.96

(i)Cement mortar 1:3 (1-cement:3-sand) at All Floor

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) at at all Floor level.

20mm thick sand faced cement plaster on walls

above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete. at All Floor level.

Providing throating or plaster drip and moulding to

R.C.C. Chhajja at all floor level.

Providing cement vata (10cm. x 10 cm. size) quarter

round in cement mortar 1:1 including neat cement

finishing, watering etc. complete at all floor level.

Providing & applying CHEMICAL WATER PROOFING

treatment to the terrace / sunk slab including

cleaning the surface, opening the creaks in " V "

grooves pattened and filling the same water proof

cement mortar 1:1 (1 cement: 1 sand ) including

brick bats as directed to have proper slope over a

layer of C.M. 1:1 (1 cement: 1 sand) including

finishing the top surface with 15mm thick water

proof cement plaster in C.M. (1:3) (1 cement:

sand) and finishing with a floating coat of neat

31 cement slurry using chemical water proofing Sq.mt. 532.00 443.80

compound as per manufactures specifications and

standard specifications as per indian Water proofing

or equivalent including curing its with specified

period as directed and thickness to very between

mm x 150 mm to have proper slope and gradient

including vata of 100 mm x 100 mm size on with drip

mould inside periphery of the parapet / beam in

C.M. 1:1 (1 cement: 1 sand ) etc. completed by EIC.

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

32 creme out upto surface using white cement Sq.mt. 502.00 765.98

including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Providing and laying Vitrified tiles (GVT) 8 to 10 mm

thick , 24'' x 24'' in flooring laid on a bed of12mm

33 thick cement mortar 1:3 (1-cement : 3-coarse sand) Sq.mt. 484.00 1058.21

finishing with flush pointing in white cement. at all

Providing and laying Ceramic tiles 6mm thick in

flooring in Toilet and landing laid on a bed of 12mm

34 thick cement mortar 1:3 (1-cement : 3-coarse sand ) Sq.mt. 33.00 994.33

finishing with flush pointing in white cement. at all

Providing and laying Ceramic tiles 6mm thick in

Toilet dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white

cement slurry at all floor

Providing and fixing in Door ,Window sills and

jambs 18 mm thick Green Marble of approved

shade and size laid over a bed of C:M 1:6 including

36 cement floating, curing, rubbing, polishing, cleaning, Sq.mt. 94.00 1575.60

moulding on each side etc. complete and joints with

white cement. at all floor level.

Providing and fixing Sandwiched granite and kota

as Kitchen platform, pantry, Basin counter of width

0.60 to 0.70 m with 18mm thick granite of approved

color + 30mm Cm in 1:4 + 20mm kotah stone one

side polished in one piece for kitchen / platform. The

joint shall be filled with white cement with pigments

to match the color of the stone. The cutouts for

Kitchen sink if required shall be provided as per

drawing. The platform shall be supported on pair of

polished kotah stone @ 0.75 to 0.90 m c/c filled with

cement slurry. It shall include facia. The facia and

other edges shall be duly chamfered / rounded as

per drawing. The stone shall be of one shade only

and different shades if found will be rejected,

finished sizes shall be measured & paid for.complete

as per detailed drawings & directed by E.I.C. at all

Providing and fixing 25 mm thick Kotah Stone

Double Side Polished with machine cut edge to all

sides as a platform, shelves, divider wall etc.

including making groove in wall and making the

same as per original including fixing the same with

C:M 1:3 ( 1 cement : 3 Bodeli sand ) in true line and

level, curing including rubbing, rounding edg and

polishing etc.complete as per detailed drawings &

directed by E.I.C. at all floor level.

P/F 18 mm avg. thick double polished(both side) jet

black granite slab for urinal partition incl. making

39 groove in wall and fixing properly in line & level incl. Sq.mt. 2.00 2403.65

all cost of materials & labours etc. complete at all

Providing and fixing 35mm thick both side

laminated water proof flush door shuttersof

archid/anchor/green ply make including firstclass

hardwood and cross band,block board core with

plywood face panels,12mm thick batten pattiall

around the shutter,1mm thick. Door skin laminate

sheet (Rebeeca/equivalent) on both side including

(A) SS finish YAMA/equalent make fixtures1)

Supreme heay butt hinges 150x70x2.5-4nos (2)

Tower bolt square 150x10-1no (3) door stopper

premium -1nos (4) Plate type fancy handle 150-

2nos . (All nos of fixtures are for one shutter ) S.S

finish casted aldrop ing 300x16(3+1)-1nos ,including

providing and applying prime coat Asian /Berger

make and two coats of oil painting of Asian /Berger

make to the edges etc.complete as per detail

drawings and as directed by E.I.C at all floor level.

PARTLY GLAZED DOUBLE LEAF DOOR (LAMINATE

FINISH):- Providing & Fixing Partly Glazed Double

leaf Door, of size as per deatil drawing (for each

door.) considering block board flush door sheet of

35 mm thickness covered both side by 9 mm ply &

finished with 1 mm thick laminate on both sides of

shutters and having 12 mm clear toughen glass

slits as per given pattern & size with crystal edges

in both shutters , fixed with burmaborder Patti at

joints , Finishing with all necessary S.S hardwires

like DOOR S.S Handles 5PHO 2218SS -FPHO 2218

conceal Door lock Mortize Body 85x60M S.S , DOOR

UK key CYLI,60MM 1CK S.S 5 KEY M/HL 125 ROSE

SS ,cylinders, stoppers, tower bolt, MS nails, SS-304

screws,miscellaneous hardware items etc. As per

details given in drawing and as per instructions of

Architect/consultant/Engineer In charge.

Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter having extra reinforcement

on sides & edges in polish finish. The core of the

shutter & frame is to be filed up with injected

polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also

42 taking hinges & fintures. The whole FRP frame & Sq.mt. 5.00 2615.05

shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & fastener

sleeve. at all floor level.

Providing and fixing window having extruded

aluminum Colour anodized section (2 nos. glazed &

one no. Mosquito net) frame main outer size 95mm

x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal

Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with

sliding shutters of horizontal member size

43 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical Sq.mt. 39.00 1804.57

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

at all floor level.

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

at all floor level.

Providing and applying one coat of water based

exterior primer of approved brand and make as

mentioned below on wall surfaces after thoroughly

brushing the surface free from mortar droppings

and other foreign matter. Item includes making the

surface even and smooth by sand papers. Rates are

inclusive of all the material and labourers and

45 scaffolding work, cleaning of the floors etc. required Sq.mt. 1024.00 152.76

for the work with weather proof exterior emulsion

paint on wall surface (two coats) to give an

required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete at all

Applying two coats of Birla (white cement based) or

Asian (acrylic lapy- putty) or equivalent & two coats

of primer of approved brand and manufacture on

new wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth with Wall painting (two coats) of

plastic emulsion paint of approved brand and

manufacture on undecorated wall / Ceiling surfaces

to give an even shade (work for all the floors)

Providing and fixing M.S. grills of required pattern to

frames of windows & ventilation etc. with M.S. flats

at required spacings and frame alround, square or

round bars with round headed bolts and nuts or by

screws (A) Plain Grill. Etc complete as directed by

architect /EIC at all floor level.

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning,oil,grease, dirt and

other foreign matter and scoured with brushes fine

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead. and Painting

48 two coats (excluding priming coat) on new steel Sq.mt. 70.00 124.75

and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other

foreign matter. at all floor level.

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick

49 A.C. sheet or plywood sheet and fixing to wooden Each 7.00 851.13

pluge with C.P. brass screws and washers. at all floor

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover

51 with frame of 300mm x 300mm size (inside) with Each 6.00 1292.20

standard weight.(i) Square mouth traps. (A) 100mm

x 100mm size P type.

Supplying and fixing reinforced concrete heavy duty

non-pressure pipes with collars for culverts

including setting and joining the pipes in C.M. 1:2

watering and laying (to level or slope) of I.S. class

NP2 of following internal diameters.(i) 300mm dia.

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

53 of clamp at every two metre C/C or shall be R.mt. 20.00 72.65

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

54 of clamp at every two metre C/C or shall be R.mt. 60.00 91.84

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

55 of clamp at every two metre C/C or shall be R.mt. 26.00 148.12

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing, laying in treanches and jointing in true

line and level 50mm dia. U-PVC PLUMBING PIPE line

(SCH-40) including fitting of (As per make list) as

approved by Engineer in charge. Pipe shall be fixed

on the wall with the help of clamp at every 2 meter

c/c or shall be concealed as directed including

necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent,

including cost of all material including excavation for

trenches and reffiling etc.. complete as directed by

Providing & fixing 75 mm dia. PVC " Cowl Vent" of

ISI make of working pressure 4 Kg/sq.cm. with

57 adhesive solvent cement etc. in true line and level Nos. 4.00 33.33

etc. complete as directed by Engineer In charge.

Providing & fixing 110 mm dia. PVC " Cowl Vent"

of ISI make of working pressure 4 Kg/sq.cm. with

58 adhesive solvent cement etc. in true line and level Nos. 4.00 43.43

etc. complete as directed by Engineer In charge.

Providing, laying and jointing in true line and level

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

Providing, laying and jointing in true line and level

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

Providing, laying and jointing (to level or slopes)

160mm diameter PVC-U SWR pipes (Type B)

conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting

conforming to ISI 14735-1999 of ISI (PRINCE /

SUPREME / ASTRAL / FINOLEX / Equivalent) or

approved brand for drainage-line fitted in trenches

61 including excavation for trenches & refilling, Pipe R.mt. 50.00 1111.00

shall be jointed with each other with rubber

lubricant, including necessary fittings such as bends,

shoes etc. including testing of pipe & joints and

jointed with adhessive solvent cement including the

cost of all materials etc... completed as directed by

Providing, laying and jointing (to level or slopes)

110mm diameter PVC-U RIGID pipes (Class 2) with

working pressure 4 kg/cm² conforming to IS 4985-

2000 with one end plain and other end socketed

with rubbering and fitting conforming to ISI 7834 of

ISI approved brand for Rainwater line fitted in floors

or walls. Pipe shall be jointed with each other with

rubber lubricant, Pipe shall be fixed on wall using

PVC clamps at every 2000mm c/c or shall be

62 concealed in wall as directed including necessary R.mt. 36.00 342.39

fitting such as bends, tees, shoe bend, end cap for

future expantion etc. including testing of pipe &

joints and jointed with adhessive solvent cement

including the cost of all materials including cutting

and making floors and walls as per original/good

enough if require.... etc., complete. as directed by

Providing and fixing PVC SWR Nahni trap IS

for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

Providing and fixing wash down water closet

(European type, W.C. Pan with Jet spray heavy duty

with S.S. Braided hose 60 cm long) with integral P

or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal

and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white

colour As per make list

Providing and fixing to level or slope 110mm dia.

PVC-U SWR W.C. Connector of approved brand with

lipring including rubber packing ring fixing with

adhesive solvent cement and testing the same air

and water tight... etc., Complete as directed by EIC.

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

including fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550mm x v 400mm size. (i) In white

colour., including fixing C.P. Brass waste coupling

32mm dia. & 32mm dia. rigid P.V.C. waste pipe &

Providing and fixing pillar tap, capstan head, screw

down high pressure with screws, shanks and back

nuts. (i) 15mm dia., Providing and fixing brass screw

down stop tap.(A) 15mm dia., 15mm P.V.C.

connection pipe etc.. complete as ditectrd by E.I.C.

As per make list.

Providing and fixing SS Sink Glosy ASIS 304 Grade x

1mm thick with over all size 610x460 mm & bowl

size 560x410x200 with C.I. or M.S. brackets, painted

white including cutting holes in walls and making

good the same including fittings and including the

cost of providing and fixing rigid P.V.C. waste pipe of

32mm dia. and waste coupline 32 mm dia. and

testing the same for leak proof etc. complete as

directed by E.I.C As per make list.

Providing and fixing pillar tap of approved ISI brand

capstan head, screw down high pressure with

screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing chromium plated brass half

trun flush cock of rom made of approved quality

including fixing in pipe line etc. complete.(i) 20mm

Providing and fixing brass screw down stop tap.(A)

Providing and fixing Two way BIB cock with wall

flange of genuine Jaquar ompany brand, in with

model no FUS-CHR29041, water tap brand or

71 approved ISI brand quality, fixing in pieline and Nos. 6.00 2949.20

testing the same… etc., complete., as directed by EIC

Providing and fixing ball cock of approved. quality

as directed.(B) Abonite (ii) 50mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(E) 40mm dia.

Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary

fittings and connection etc. complete on terrace

Providing University Logo and Letter's Of different

sizes Engraved on Black Granite Stone, Painted with

75 Gold Foil on it. Making a Plaque and Fixing it on the Job 1.00 18180.00

structure, Price with Labour

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete.(A)

Shutters having width below 3.5M.

Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade

78 concret as per approved design and including R.mt. 50.00 404.22

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

Providing & Fixing the Chikenmesh -

guage(Crimp Jali) of approved size applying between

the RCC and masonry junction in proper line, level

and plumb with all material, labour, tools, tackles

and equipment. Including providing and fixing the

jali with nails, etc complete as directed by the site-in-

charge. at all floor level.

TOTAL AMOUNT OF CIVIL & PLUMBING-DRAINAGE WORK

TOTAL AMOUNT OF CIVIL & PLUMBING-DRAINAGE WORK