REPAIR /MAINT CENTRIFUGAL PUMPS, MOTORS, LT PANEL, PROTECTION AND CONNECTIVE ITEMS INCL CI/GI PIPE LINE AND ALLIED WORKS WITH CLEANING TANK AND LEVEL INDICATORS AT PUMP HOUSE AT TECH AND RESIDENTIAL AREA AT ITM MUSSOORIE UNDER GE (I) RND DEHRADUN

Amount

Disconnecting, removing the water ,electric connections and taking out carefully the old existing defective electric motor, 20 HP of booster pump / centrifugal pump of any description and in any position, dismantling and strip opening of the motor, removing the old existing burnt windings, cleaning the slots & rewinding of the electric motor 20 HP, operating on 415 V, 3 Phase, 50 Hz AC supply with existing gauge super enameled copper wire, including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeves insulating varnish etc for powering multistage booster pumps/ centrifugal pumps & testing at workshop and transportation to site & refixing on existing platform complete, all as specified and directed..

Disconnecting, removing the water, electric connections and taking out carefully defective booster/centrifugal pump of capacity 20 HP, DSM model of Make Kirloskar,, three phase, 415 V, AC supply and carrying out necessary repairs and replacement of bearing bush, gland plate, impeller, nuts and bolts etc, any trasportation to workshop if required, Repair to bearing housing with metling and turning and fixing the same in position and testing on full load complete, all as specified and directed..

Supply only the following items/spare parts suitable for centrigugal pump of capacity 15KW/20HP dismantled/fixed under Sch `A` item No 2 here in above complete, all as specified and directed..

CI impeller as per existing size

MS stud with nut for split body complete size as per sample

Ball bearing for driving and non driving end.

CI sleeve of DE / NDE

CI/MS gland packing plate

CI bush (stuffing box bush)

Pump shaft EN8 complete including making key groove with check nut

Set of key with nut & washer

Replacement of packing sheet

Supply and fixing in replacement of unserviceable water gauge of range 0-100 psi, 80/100mm dia in delivery line with in incluing socket welding in pipe line complete, all as specified and directed..

Supply, fixing, testing & commissioning in replacement of unserviceable Power Contactor ML-4 type, 3 pole, coil voltage 415 / 440 Volts, 50 Hz with 2 NO + 2 NC auxiliary contacts, having current rating (AC3) of 30 Amps at 415 volts complete, all as specified and directed..

Material and labour for repair to run lead joints of size 80mm bore including caulking properly with using old retrieved lead from taking up or down pipes but with and including using new spun yarn for the following sizes of CI pipes/fittings etc complete, all as specified and directed. Notes : (i) Earth work in excavation, returning filling in and removal shall be measured and paid separately. (ii) Additional quantity of lead, if any required, for making new joints other than the quantity of lead retrieved from taking up / down pipes, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A'

Supply only pig lead of best quality conforming to IS : 782 – 1978 for providing lead joints complete, all as specified and directed..

Supply only wool lead of best quality conforming to relevant IS for providing lead joints complete, all as specified and directed..

Supply &Fixing in replacement of unserviceable mild steel work as motor pump protection cage/ over head tank ladder etc. of suitable size of flat iron ,cut to shape, including bending and welding as necessary, etc.conforming to Fe.290.Gde-E-165, with and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete, all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick masonry including finishing the surfaces even and smooth without using extra cement complete, all as specified and directed..

M&L for providing cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in copings, holdfast and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete, all as specified and directed..

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 mtr mean radius, old size brick built in Cement Mortar (1:4), for manholes complete, all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth block for support of pipe including form work weathering slightly chamfered angle and throating with and including necessary form work and finished concrete surface even & smooth without using extra cement complete, all as specified and directed. .

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft/loose soil including forming sides and bottom surface to required levels/slops/gradients etc. complete, all as specified and directed. Note:- The disturbed surface of roads/paths/plinths etc. shall be repaired and quoted rates deemed to include this aspect.

Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete, all as specified and directed..

Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directed at a level not exceeding 1.5 mtr above starting point complete, all as specified and directed..

Taking up or down old existing GI tubing and connections, including connected fittings/ accessories and fixtures of any description/ grade and in any position in trenches/under floors/road / floor /duct on walls etc and including cleaning for reuse if serviceable or unserviceable to be removal to store complete, all as specified and as directed. (Note:- (i) Earth work in excavation, returning filling in and removal & GI fitting shall be measured and paid separately under appropriate items of Schedule ‘A’ for the following bore of pipes:-

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

Supply, laying, connecting & testing of galvanised iron water tubing 'medium grade' conforming to IS-1239 with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc as required complete fixed to walls and ceilings, laid in trenches/under floor/under road or floors complete, (Note:-(i) Earth work in excavation, returning filling in and removal & GI fitting shall be measured and paid separately under appropriate items of Schedule ‘A’) complete all as specified and directed. for the following bore of pipes :-

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

Supply, fixing and testing in replacement of unserviceable Gate valve/Globe valve and Supply, fixing, jointing and testing, of gun metal globe or gate valve with iron wheel head, both ends screwed for iron pipe, conforming to IS 778 complete, all as specified and directed for following bore of pipes :- (Make: Sant/Bir/ Leader/Upadhaya)

20mm bore

25mm bore

40mm bore

50mm bore

Taking out or down defective sluice valve from main line and opening carefully old defective sluice valve 80 mm bore and in any position for and including servicing, over-hauling / greasing etc, and replacement of old unserviceable / worn out parts and reassembling the sluice valve after repair and refixing the same & testing after installation complete, all as specified and directed Engr-in-Charge for following bores :- Note :- (i) The cost of Earth work, joints & jointing materials washers, gaskets and minor parts shall be deemed to be included in the quoted rates but Replacement of the defective parts i.e. cast iron gate & stainless steel spindle of Sluice valve shall be measured and paid for separately as supply only under appropriate items of Schedule ‘A’

Supply only stainless steel spindle 80 mm bore heavy duty, threaded, with and including one gun metal check unit suitable for sluice valves of any description dismantled/fixed under Sch `A` item No 45 here in above complete, all as specified and directed. for following bores :-

Supply, installation, fixing, jointing and testing in replacement of unserviceable cast iron sluice valve of 80 mm bore class PN-1 both ends flanged with iron wheel head and stainless steel spindle, short body type, conforming to IS-14846 of 2000 including rubber gasket and nut blot with washer for flange joints complete, all as specified and directed. for following bores :- Notes:- The cost of Earth work, joints & jointing materials of the sluice valve shall be deemed to be included in the quoted rates.

M&L in replacement of valve pit covers and Supply, fabrication and fixing of new valve pit covers fabricated from 3mm thick MS sheet with suitable size of MS angle iron frame including locking arrangement, suitable handle , fixed with hinged arrangement and applying two coats of synthetic enameled paint over a coat of red oxide primer complete, all as specified and directed..

M & L for cleaning/ scraping of steel/ cast iron surfaces of existing dull painting of Valve pit chamber inner pipe lines and valves etc and applying two coats of synthetic enameled paint over a coat of red oxide primer by spray machine complete, all as specified and directed.. Note : The Chamber, valves, connected pipe line etc. shall be painted according to colour code specified as per IS Instructions and as directed. at site.

M&L in replacement of unserviceable Indicator lamps of any size & capacity after disconnecting all the electrical connections and supplying, fixing connecting and testing Indicator lamps neon type suitable for 220 volts 50Hz, AC supply including wiring with 1.5 Sqmm PVC insulated stranded copper conductor cable complete, all as specified and directed.. (Make : L&T/BCH/Rishab )

M&L in replacement of unserviceable volt meter of any description and supply, fixing, connecting and testing Digital type of size 96mm x 96mm, AC Volt meter 500 Volts including wiring with 1.5 Sqmm PVC insulated stranded copper conductor cable complete, all as specified and directed.. Make : DENKO/ESCORP/AE

M&L in replacement of unserviceable Amp meter of any description alongwith CT’s and supply, fixing, connecting and testing Digital type of size 96mm x 96mm, AC Amp meter 200 Amps with including 3 Nos C.T of Ratio 200/5 of class-1.0 including wiring with 1.5 Sqmm PVC insulated stranded copper conductor cable complete, all as specified and directed..Make : DENKO/ESCORP/AE

M&L for cleaning and disinfecting of RCC semi under ground tank of 50,000 gallon capacity any shape by initially cleaning the external area and the entry man hole with skilled manpower with protective clothing and apparatus etc and approved electrically operated equipments including all tools, tacles and labour equipments e.g. electric machines, pumps (including desludging pump), pressure water jet, sludge removal etc. required for completion of the work in all respect by specialized water tank cleaning process as under: (i) Dewatering of over head tank by drain out pipe. (ii) Mechanized removal of all remaining dirty water by high capacity pump set. (iii) Removal of sludge by vacuum operated Pump. (iv) Cleaning of walls, ceiling and bottom of tank by high pressure rotary jet 120 bars pressure. (v) Removal of all dirty particles by industrial wet vacuum cleaner leaving the tank 99.9% physically cleaned. (vi) Sterilization of tank by Echo-Friendly biodegradable and highly effective anti bacterial non toxic agent approved by NTC (National Toxicology Center) against all pathogens agent of tank clean. (vii) Sterilization of tank atmosphere by industrial UV radiator leaving the tank complete sterlite by specialized method (viii) After complete treatment is carried out, all inlet, over flow, delivery, wash out pipes, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surfaces and also the surfaces of sluice valves shall be painted with P.O. Red paint and writing " capacity of tank, date of cleaning and due date of cleaning" on wall as specified and as directed. Notes: (i)The work will be got executed from the reputed specialized water tank cleaner as approved by GE. (ii) All the sludge materials / fungus removed from the underground sump / semi underground sump and over head tanks will be removed outside defence land from the site. (iii) All underground sump / semi underground sum and overhead tanks will cleaned in all respect upto 3 mtr around the water tanks. (iv) All T & P required for the cleaning of tanks / Sumps will be arranged by the contractor. (v) The wire mesh of ventilations of the tank shall be replaced with new mesh. (vi) The cost of the same shall be deemed included in the respective items.

All as per item No 54 here in above but steel tank (over the ground) of capacity 50,000 gallon complete, all as specified and directed..

All as per item No 55 here in above but RCC over the ground sump of capacity 25,000 ltrs complete, all as specified and directed.

Supply, installation, testing and commissioning in replacement of unserviceable electronic auotmatic phase sequence corrector device working on IC based technology, capable to correct disturbed pahse sequence, prvent the motor from reverse rotation, ptotect motor from phasing, low / high voltage cut with time delay between 350 Volt to 480 volts with 60 second delay, protection against unbalanced load of two phase out of three phase supply system withnout Contractor and box complete all as specified and directed Make as approved by GE.

Supply only set of 25 pcs chlorine tablets contained in plastic cylindrical sealed disposable sanitizwe refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water suitable for operation through for recommended dosing system.

Collecting the sample of water from each source "bore well" and testing the sample for physical, chemical & bacteriological parameters and submitting the report in duplicate with comparison by IS-10500, complete for 29 parameter.

Labour only for checking the serviceability of the pipe line of any description and fixed in any position & replacement of un-serviceable/damaged/ broken parts either in single or in combination, dismantling and re-assembling the pipe fittings, CI Peag lead/ lead wool joint and making the pipe lines serviceable, fixing the pipe fittings in position, connecting to water supply and its testing on installation complete, all as specified and directed, by Engr-in-charge by emplooying one plumber and one helper (Unshild) by receving complaint slip from MES service centre and returning the same after completion the job to MES authority complete, all as specified and directed here in after in notes. NOTES :- (i) Replacement of parts i.e nipple, union, elbow, bend, reducer & etc for 15/20/25/40/50mm GI pipe fittings and CI pipe peag lead/ lead wool of any cap joints if any required at site, shall be measured and paid for separately under appropriate item of Schedule `A' as ‘supply only. (ii) Necessary T&P i.e. ladder, tools etc required for checking and making the pipe fittings in serviceable conditions, its fixing in position and testing shall be arranged by the contractor at his own cost for checking and fixing of pipe fittings of any description on walls / ground etc i.e. in any position at site. (iii) Required parts ie. thread/ adhesive etc and other minor items excluding the required spares parts for repairing and making the water supply line in serviceable condition, will be arranged & supplied by the contractor and cost of which is deemed to be included in the rates quoted by the contractor in above respective item. (iv) Contractor’s quoted rates is deemed to include for inspection/checking the serviceability of the pipe line removing the damaged unserviceable / broken parts, fixing the new parts.

Supply only the following parts for Water supply GI fittings complete, all as specified and directed.

Union 15mm bore

Union 20mm bore

Union 25mm bore

Union 40mm bore

Union 50mm bore

Union 80mm bore

Elbow 15mm bore

Elbow 20mm bore

Elbow 25mm bore

Elbow 40mm bore

Elbow 50mm bore

Nipple 15mm bore and of any length upto 150mm

Nipple 20mm bore and of any length upto 150mm

Nipple 25mm bore and of any length upto 150mm

Nipple 40mm bore and of any length upto 150mm

Nipple 50mm bore and of any length upto 150mm

GI socket 15mm bore

GI socket 20 mm bore

GI socket 25 mm bore

Reducer 15X 20 mm

Reducer 15X 25 mm

Reducer 20X 25 mm

Reducer 25X 40 mm

Reducer 40X 50 mm

Tee 15mm bore

Tee 20mm bore

Tee 25mm bore

Tee 40mm bore

Tee 50mm bore

Tee 15 x20mm bore

Tee 20 x25mm bore

Tee 15 x25mm bore

Tee 25 x40mm bore

Tee 40 x50mm bore

M & L for cleaning/ scraping of steel/ cast iron surfaces of existing dull painting of pump/motor of 20HP capacity & pipe in side PH building upto 80mm dia & appx 5 RM connecting pipe lines and valves etc. and applying two coats of synthetic enameled paint over a coat of red oxide primer by spray machine complete all as specified and directed. Note : The pump/motor, valves, connected pipe line etc. shall be painted according to colour code specified as per IS Instructions and as directed at site.

Supply,Installation,testing & commissioning in replacement of unserviceable automatically water level indicator system comprising with the following accessories, including making necessary connection for controlling/ maintain the water level indicator automatically complete,all as specified and directed. :- (i) Water controlling automatic system with sutitable size/cap of pump off/on and indicator with timer contractor relay in box for syncoring, Make : BPB. -01 Nos. (ii) Suitable capacity of Senser for 100% filling and position for motor on/off.- 01 Nos (iii) Senser for 30% filling and position for motor on/off . -01 Nos (v) Suitable size of Wire 4 pair and 8 wire .-170 RM (vi) Wire 1.5 Sqmm 3 Core (For Senser.).-10 Mtrs

Supply, laying, jointing and testing in replacement of unserviceable bib taps for 15mm bore pipe chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete, all as specified and directed.

Supply, laying, jointing and testing in replacement of unserviceable bib taps for 20mm bore pipe chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete, all as specified and directed..

M & L for Cutting of the existing 80/100 150 mm bore of GI/ CI pipe line for rectifying leakage and reducing to required length, in position, for insertion of collars or Tee & other fittings including dewatering etc complete all as specified and directed. Note :- CI fittings, jointing materials and earth work shall be measured and paid separately. How ever cost of dewatering is included in the quoted rates.

M & L for fabrication of Installation sign Board of size 900 X 600 made out of 3 mm thick MS sheet and position the same on 50 X 50 X 6 mm Angle iron frame & fixing on 2 Nos posts made out of 40mm dia medium grade GI pipe up to 150 cm height ( 105 cm above the ground level and 45 cm below the ground level) with necessary fixing arrangements such as bolts, nuts and washers incl painting the sign board except GI posts with one coat of red oxide paint and two coats of synthetic enamel paint over the primer & pasting of retro refactive High intensity Grade (HIG) 3 mtr blue sheet over the PGI sheet with white 0.5 incl border and weiting of information over board by cutting and pasting of letters, complete all as specified and directed. Make of PGI Sheet : TATA/SAIL Note :- Information for pasting is approved by GE, all material and cutting ,pasting is deemed to be included in the rates quoted by the contractor in above respective item.

Supply and fix multi cavity water sanitiser/conditioning station with proportional dosing arrangement at zero diacharge of the power free automatic system 100 Ltr tank , cavities are completed with lids with overfolw valve, water inlet valve, outlet valve (for offline automated gravity flow), drain valve, RVC pipe etc alogwith set of 25 pcs chlorine tablets contained in plastic cylindrical sealed disposable sanitizwe refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water suitable for operation through for recommended dosing system. (a) Replacement indication - visual & weight variation (b) water contact orifice design sealed when dry exposed upon.

M&L for construction of brick masonry valve pit of size 60cm x60 cmx60cm (internal dimention) with necessary excavation , returing filling in, steel work for cover using MS sheet 3 mm thick welded/hinged MS angle iron 40x40x6mm forged flat iron hinges, sliding type lifting handle of MS bar 12 mm dia all as per shown in drawing No TD/EM/12 complete all as specfied and directed.

All as per item No 45 above but of size 90cm x90 cmx90cm ,complete all as specified.

Disconnecting and Taking out old unserviceable LT Panel any type and shape, size, and Supply, installation, testing and commissioning out door type factory made kisok cubicle type, dust and vermin proof of suitable size IP class protection made of 3mm thick CRCA sheet and angle iron 50X50X6mm frame including power coating complete with locking arrangement mounted on PCC platform 100 mm thick made out of PCC 1:3:6, 1 mtrs all round the panel board suitable for 3 phase 4 wire 415 V, 50 Hz factory fabricated in an approved factory having modern fabrication and comprising of following :- (Location - Security office) (i) Incoming :- (a) MCCB, 250 Amps, 4 pole, 415 Volts, AC supply, with suitable enclosure Qty – 01 Make:Legrand/Schnieder/Siemens/Havells) (b) Digital Ammeter 3 Phase AC 0 – 200 Amps, with 3 current transformer of suitable ratio and capacity Qty -01 No. (c) Indicating lamps LED type for three phases -R Y B of 3 Nos, (d) Digital Voltmeter 3 Phase AC 0 – 500 Volts.Qty -01 No. (e) Bus-bar chamber having 3 nos insulated aluminium bus-bar of 600Amps rating and one No. bus bar of 300 Amps rating of suitable shape and size. (ii) Out Going :- (a) MCCB, 100 Amps, 3 pole, 415 Volts, AC supply, having breaking capacity , 35 KA with adjustable thermal & fixed magnetic setting, Qty – 02 No.(Make: Legrand/Schneider/Siemens/Havells) (b) MCCB, 63 Amps, 3 pole, 415 Volts, AC supply, having breaking capacity , 25 KA with adjustable thermal & fixed magnetic setting, Qty – 03 No.(Make: Legrand/Schneider/Siemens/Havells (c) On load Change over switch of cap 250 Amps, 4 pole, 415 Volts, AC supply, with sheet metal enclosure with adjustable thermal & fixed magnetic setting, Qty – 01 No.(Make: Legrand/Schneider/Siemens/Havells/C&S Note : (i) The contractor shall submit proposed drawing of the panel interlia mentioning make of switchgears to be incorporated alongwith name of panel manufacturer for approval of GE before manufacturing. (ii) The quoted rate is inclusive of the cost of danger notice plate of suitable size and marking of letters with PVC sheet/ Stickers such as incoming and outgoing and capacity of breakers etc. (iv) The cost of fixing of the panel on suitable PCC (1:3:6) type C-1(using 20 mm graded black trap/basalt/granite stone aggregates) foundation as directed by Engineer-in-Charge is deemed to be included in the quoted rates by the contractor for the above item. (v) The bottom of panel shall have minimum 45cm height from existing ground / floor level.

Disconnecting & taking down old existing unserviceable changeover switch of any description and in any position complete and Supplying, fixing, testing and commissioning of side operated OFF Load type changeover switch 4 pole, 415 volts, 250 Amps with and including sheet enclosure complete all as specified and directed. Make : Havells or equivalent model of specified make as approved by GE.

Disconnecting & taking down old existing unserviceable changeover switch of any description and in any position complete and Supplying, fixing, testing and commissioning of side operated OFF Load type changeover switch 4 pole, 415 volts, 200 Amps with and including sheet enclosure complete all as specified and directed. Make - Havells or equivalent model of specified make as approved by GE.

Dheer Engineering

JS CONSTRUCTION COMPANY

MAHADEV ELECTRICALS