SPL REPAIRS TO BLDG NO P 385 INCLUDING ROOF TREATMENT AT MIL STN DHRANGADHRA

Amount

M&L for hard core of gauge exc 63mm but n exc 100mm deposited, spread and levelled in layers n exc 15cm thick watered and rolled/rammed to a true surface completed all as specified and directed.

M&L for plain cement conctete 1:2:4 type B1, using 20mm graded stone aggregate as in padding on roof using integral water proofing compound @ 2% by weight of cement, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(WPC will be measured and paid separately).

M&L for water proofing treatment to existing non-accessible roof slabs by providing 10mm thick bedding layer of cement morter 1:3 mixed with water proofing compound as per manufacturer's instruction and applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltr/Sqm and applying of one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm and laying of actetic polypropylene (APP) modified membrane pre-fabricated, reinforced with non-woven polyester of 3.50Kg/Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete including taking down existing water proofing treatment with bedding layer of cement mortar complete and removal of debris out side of MD land all as specified and directed.

M&L cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed.

M&L for Cement Concrete type B-2, 1:2:4 using 40 mm graded crushed stone graded agg as in fdn filling and mass concrete (water storage tank platefom) complete all as completed as directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for walling of random rubble stone masonry, brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each.

M&L For 35 mm thick factory made 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F, Flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

S&F, 75 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F, Aluminium handles, cast type, anodised 85 mm long complete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

S&F in repair mild steel bolts purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends. each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long dia of neck n exc 20mm complete all as specified and directed.

M&L for TMT 10mm dia bar and over, as in stiffeners, cut to length, bent to shape required, including cranking, bending, hooking ends, binding with and incluing mild steel wire(annealed) not less than steel wire 0.9mm dia or securing with clips complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-410, Gde E-250 quality B including one shop coat of zinc chrome primer complete all as specified and directed.

S&F for gusset plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk foring hole without any attachement to Fe-410 (Gde E-165) quality A complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165 including one shop coat of zinc chrome primer complete all as specified and directed.

M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for anodised aluminium windows/ventilators with one or more rebates including joining cleat for fixing etc. complete with frames, shutters and grills of size directed by Engineer-in-Charge including handles, tower bolts, grills, etc complete all as sepcified and directed. Note : Sheet glass, wire cloth, lock, etc shall be measured and paid separately.

S&F, in repair, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&L for machine cut kota stone slab 550mmx550mm, 20-25mm thick as in flooring laid over and including cement mortar screed bed of 15mm thick in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20-25mm thick black granite stone slab machine cut as in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over screed bed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C2, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L, for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 50mm thick (compacted thickness) sand cushion below paver blocks complete all as specified and directed.

M&L for 15mm thick rendering in CM 1. 6 on stone masonry surface or surface other than fair face of brickwork surface finished fair and even without using extra Cement

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on stone masonary surfaces or surface other than fair face of brick work and finishing the surface even and smooth w/o using extra cement completed as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for preparation of new plastered or unplastered surface of wall and applying two coats of oil bound distamper over a coat of JK/Birla putty including preparatory to distempering on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall including brooming dowon or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on wall complete all as specified and directed.

S&F, 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors,aprons etc complete all as specified and directed.

M&L for demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for dismantling for timber scantling 40 sqcm and over in section, an any position (framed) complete all as specified nand directed.

M&L for dismantling for timber scantling fillet rails, post rafter purlin etc under 20 sqcm in section (unframed) complete all as specified and directed.

Dismantling structural steel work including door , gatesbut excluding framed truss etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheet in roof covering

Taking down carefully copper/Aluminium point wiring (Light, fan, socket or power) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed by Engr-in-charge.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for 6 Amp socket outlet on independent board complete all as specified.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for 6 Amp socket outlet on same board complete all as specified.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 2.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 2.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for for 6/16 Amp independent socket.

S&F modular switch piano, flush type 6 Amps one way 230 volts complete all as specified.

S&F Socket outlet 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F modular switch one way 16 Amps flush type 230 volts complete all as specified.

S&F modular socket outlet 2-3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed.

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volt

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

M&Lfor Sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing caping complete all as directed by Engr-In-charge. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

S&F, ceiling fans 1200mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessoried and connecting up with 3 runs of suitable size single phase PVC insulated unsheathed, FRLS cable with multistanded copper conductors from ceiling rose to fan complete all as specified and directed.

S&F, Exhaust fan, 300 mm sweep, 1200 rpm, PVC AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

S&F, LED compact fitting/batten for single LED tube of 1x20W, 220 V AC decorative box type 4 ft with integral LED driver including 20W, T8 tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed as pe Make of havells cat No. LHFXCENNTN1W020 for batten and cat no. LHLDEFXD5L8R020 for holder or equivalent make as approved by GE.

M&L for taking down carefully old unsv submain wiring of any type/any size with PVC conduit of casing caping complete all as specified and directed.

Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection and making good the disturb surface all as directed by Engineer-in-charge.

S&F, in repair, Distribution Board Power line VTPN , 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including with 3 pole MCCB 200 Amps rating ,10KA breaking capacity for incoming supply and 12 Nos single pole MCBs for out going supply complete all as specified and directed.

Labour only for cutting opening through brick walls for fixing of exhaust fan, including providing fixing and removing shoring cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc. rubbish not exc 50m. forming jambs etc. to opening for 250mm exhaust fan including cutting tin wall for cement mortar 1:6 toothing and properly bonding into old work, also facing, jointing and pointing to match the existing work complete all as specified and directed

S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make : Havells/Bajaj/Philips/Crompton

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.

Nitesh Enterprise

Prashiv Enterprise

divyarsh entrprise

SONU INFRATECH LTD

JAMNAGAR ELECTRIC AND MACHINERY CO