Carrying Out of Special Repair works for 56 Nos. of PC/HC quarters to Block A to Q, AA to OO at MARSINGHPETTAI in Trichy City

Amount

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

41) Painting 2 coats - New "iron work"

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

74) Charges for assembling and fixing of ceiling "Fan"

Annexure 3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 20mm thick a. In Ground floor

b. In First floor

c. In Second floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

29.9.2) Supplying and fixing of Ceramic tiles for flooring using Grout (Tile Joint Filler) using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

32.1.4) Pointing the pressed tiles with C.M. 1:3 mixed with WPC using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

37.3) Thorough scrapping of old plastered surface

38.4.3) Painting the old wall with one coat of Oil Bound Distemper over the Existing wall surfaces

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)

54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

71.2.3) Supplying and fixing of 32 Amps double pole main switch

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

75.1.3) Supplying and delivery of Fan Step Regulator 100W - 1 Module - Lower end

77.5.1) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

77.6.1) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

77.7.1) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED bulb with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

105.1) Run off main 4 wires of 4 Sq mm. (EB service connection)

106) Supplying and fixing of 5 Amps 5 Pin Flush type wall socket

107) Supplying and fixing of 5 Amps Flush type wall switch

119) Supplying and delivery of 3 HP clear water vertical wet type submersible pumpset three phase suitable for borewell

119.1) Supplying and delivery of 5 HP centrifugal monoblock pumpset

120) Labour charges for the erection of submersible pumpset in borewell / openwell upto 5 HP

120.1) Labour charges for erection of Horizontal shaft, Centrifugal pumpset (coupled/monoblock) Above 3 HP upto 7.5 HP in Borewell / Openwell

120.2) Labour charges for Removing of Horizontal shaft, centrifugal pumpset (Coupled / Monoblock) Above 3 HP upto 7.5 HP in Borewell / openwell

120.3) Labour charges for Removing of Submersible Pumpset in Borewell / openwell upto 5 HP

121.1) Supplying and delivery of three phase panel board of direct online starter with two level guard and auto start 3 HP

121.2) Supplying and delivery of three phase panel board of direct online starter with two level guard and auto start 5 HP

122) Supplying and fixing of following dia of the PVC, GI & GM specials a) 50mm dia PVC Coupler

b) 50mm dia PVC Elbow

c) 50mm dia PVC Tee

d) 50mm x 40mm dia PVC Reducer

e) 50mm dia GI Bend

f) 50mm dia GI Union

g) 50mm dia GM Non Return valve

h) 32mm dia GM Gate valve (Heavy Duty)

i) 50mm dia GI Hex Nipple

j) 25mm dia GI Hex Nipple

k) 20mm dia GM Gate valve (Heavy duty)

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

124.2) Supplying, laying and fixing of following dia GI Pipes in walls Above Ground level a) 50mm dia GI Pipe

125) Supplying, laying and fixing of following dia UPVC Pipes in walls / Below Ground level a) 50mm dia UPVC Pipe

b) 32mm dia UPVC Pipe

125.2) Supplying and fixing of 25mm dia Rigid Pipe

126.1) Supplying and fixing of following dia M.S. Clamp set a) 150 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

128) Supplying and delivery of 40mm dia Cast Iron Adopter

132) Drilling of 150mm dia Vertical bores in Hard rock area a) Upto 150m Below Ground level

b) From 151m upto 180m

c) From 181m upto 210m

d) From 211m upto 240m

e) From 241m upto 270m

f) From 271m upto 300m

g) From 301m upto 330m

132.1) Charges for developing the Borewell with Air compressor of 600 CFM capacity (Minimum 8 Hrs)

133) Supplying and fixing of following dia PVC casing pipe as per IS 12818/2010 a) 200mm dia PVC Casing Pipe (Casing Shallow depth)

134) Supplying and fixing of 200mm dia PVC end cap suitable for covering the casing pipe

134.2) Supplying of following dia UPVC column pipe for Borewell a) 40mm dia UPVC column pipe

383) Supplying and fixing of Cuddappah sink 600x600x200 mm

571) Supplying and fixing of Colour Galvalume sheet roofing 0.47mm thick

572) Supplying fabrication and fixing in position of mild steel angles for truss including cost of all materials and labour charges

796.2) Painting the old outer walls with one coat of Exterior emulsion paint without primer

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by manual / by using deploying machineries

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of Pressed Tiles & Weathering Course

800.3) Chipping of concrete and roughening the surface

800.4) Clean removal of cement plaster from walls and racking out joints 20mm deep

800.5) Clean removal of Floor finish and dadooing walls in cement mortar with Mosaic tiles / Glazed Tiles / Clay Tiles / Cuddapah slabs

800.6) Dismantling clearing away of Indian Water Closet including labour charges etc.,

800.7) Removing of damaged Plinth Protection and Chamber cover slab

800.8) Peeled off concrete portion redoing with Micro concreting including cost of material and labour charges for rust removal and applying of water proofing compound and Epoxy paint coating in corrosive steel portion

U.Murugesan