Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹12,000
Closing Date
14 May 2026, 9:30 pmClosed
Karnataka Power Corporation Limited
EXECUTIVE ENGINEER PURCHASE
Procurement of Workshop tools required for RTPS
KPCL/2026-27/IND2612
KPCL/2026-27/IND2612
Open
Two Tender Document System(Two Cover)
KPCL Executive Engineer Purchase Office RTPS Raichur
6 documents required · 3 mandatory · 3 optional
The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s) similar to the type specified in the ‘Schedule of Requirements’ up to at least xxxx % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after xxxxx and be in satisfactory operation for xxxxx months as on date of tender opening. Certificates to be provided as per Section XII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The tenderer, as authorized representative/dealer , has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document.
The legal status, place of registration and principal place of business of the company or firm or partnership.
Details of experience and past performance of the tenderer on equipment offered and on those of similar nature within the past three/five years2 and details of current contracts in hand and other commitments.
A detailed description of the essential technical and performance characteristics of the goods.
A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser.
Item-by-item commentary on the Purchaser's Technical Specifications demonstrating substantial responsiveness of the goods and services to those specifications or a statement of deviations and exceptions to the provisions of the Technical Specifications.
a) For Manufacturers: The intending bidder shall have successfully supplied ADDISON/ TOTEM/ MIRANDA/ IT/ YG/ STARCUT Make tools to any government sector/ PSU/ Major power plants/ Reputed private sector/ major industries amounting to not less than Rs. 9.44 Lakhs (Rs. 4.72 Lakhs for Micro and small Enterprises) in any one year of the preceding three financial years i.e. 2023-24, 2024-25 & 2025-26 (Preceding 2 years for Micro and small Enterprises i.e. 2024-25 & 2025-26). As a proof purchase order PO copies Single/Multiple (max.3) for any one of the said financial year during which supplies are made shall be uploaded. b) For Authorized representatives/ dealers/Suppliers: The intending bidder shall have successfully supplied ADDISON/ TOTEM/ MIRANDA/ IT/ YG/ STARCUT Make tools to any government sector/ PSU/ Major power plants/ Reputed private sector/ major industries amounting to not less than Rs. 3.54 Lakhs in any one year of the preceding three financial years i.e. 2023-24, 2024-25, 2025-26.
The intending bidder shall be a regular Manufacturer/ Authorised dealer/ Supplier of ADDISON/ TOTEM/ MIRANDA/ IT/ YG/ STARCUT Make tools. As a proof bidder shall upload valid registration certificate/dealership certificate/ relevant documents issued by the Competent Authority in e-portal.
The bidder shall have minimum average annual financial turnover of Rs. 12.00 lakhs (Rs. 6.00 lakhs for Micro and small Enterprises) during the 3 financial years i.e. 2022-23, 2023-24 & 2024-25 (2 financial years respect to Micro and small Enterprises i.e., 2023-24 & 2024-25). As a proof the bidder shall upload the certified copy of the Annual turnover certificate/Copies of Profit & Loss statement duly certified by the Chartered Accountant.
₹500
₹12,000
30 Apr 2026
30 Apr 2026
15 May 2026
7 May 2026
ANNEXURE Procurement of Workshop Tools for RTPS
SL NO IIMS CODE ITEM NAME ITEM SPECIFICATIONS UNIT % of GST included in quoted rates HSN Code MAKE/ BRAND Bidder's Compliance/ Remarks
1 290130308R SOLIDCARBIDE DRILL 10.50MM DIA MAKE: ADDISON/TOTEM/MIRANDA/SUMITOMO Micrograin Solid Carbide, Stub series, twist drill of dia 10.50 mm manufactured to-DIN 6539. Nos 8 4
2 290130309R SOLIDCARBIDE DRILL 12.00MM DIA MAKE: ADDISON/TOTEM/MIRANDA/SUMITOMO Micrograin Solid Carbide, Stub series, twist drill of dia 12.00mm manufactured to-DIN 6539. Nos
3 290130311R SOLIDCARBIDE DRILL 12.50MM DIA Totem / Miranda/ Addison make, Micrograin Solid Carbide, Stub series, twist drill of dia 12.50mm manufactured to-DIN 6539. Nos
4 290140102R A-2X5MM HSS CENTRE DRILL A-2 x 5 mm HSS Totem/Addision/Mirranda make counter/centre drill confirming to IS-6708-1977. Nos
5 290140103R A-3.15 X8 MMHSS A-3.15 x 8 mm HSS Totem/Addision/Mirranda make counter/centre drill confirming to IS-6708-1977. Nos
6 290150324R SOLID STATE CARBIDE DRILL 6.5 Totem / Miranda/ Addison make, Micrograin Solid Carbide, Stub series, twist drill of dia 6.5mm manufactured to-DIN 6539. Nos
7 290180103R HSS ENDMILL OF DIA 3MM HSS PARELLEL SHANK ENDMILL SIZE : DIA 3 MM. IS NO.-6353-1991. TOTEM/ADDISON/MIRANDA MAKE Nos
8 290180105R HSS END MILL DIA 5 MM HSS PARELLEL SHANK ENDMILL SIZE : DIA 5 MM. IS NO.-6353-1991. TOTEM/ADDISON/MIRANDA MAKE Nos
9 290180106R HSS END MILLS SIZE: 6.00MM HSS PARELLEL SHANK ENDMILL SIZE : DIA 6 MM. IS NO.-6353-1991. TOTEM/ADDISON/MIRANDA MAKE Nos
10 290180108R HSS END MILLS SIZE: 8.00MM DIA HSS PARELLEL SHANK ENDMILL SIZE : DIA 8 MM. IS NO.-6353-1991. TOTEM/ADDISON/MIRANDA MAKE Nos
11 290180114R HSS ENDMILLS OF DIA 14 MM HSS PARELLEL SHANK ENDMILL SIZE : DIA 14 MM. IS NO.-6353-1991. TOTEM/ADDISON/MIRANDA MAKE Nos
12 290220107R HSS POWER HACKSAW BLADE-800X50 MIRANDA/BIPICO/TRUECUT make HSS Power hacksaw blade of size 800x50x2.5mm-6TPI Nos
13 290220108R POWER HACKSAW BLADE-800X50X4T MIRANDA/BIPICO/TRUECUT make HSS Power hacksaw blade of size 800x50x2.5mm-4TPI Nos
14 290290105R SOLIDCARBIDEENDMILL OF DIA 5MM MAKE: ADDISON/TOTEM/MIRANDA/SUMITOMO 4 FLUTE,CENTRE CUTTING,COATED HIGH PERMORMANCE END MILL OF CUTTING DIA SIZE 05.00 MM.SAP CODE-FBK0500724. Nos
15 290290106R SOLID CARBIDE ENDMILL OFDIA6MM MAKE: ADDISON/TOTEM/MIRANDA/SUMITOMO SOLID CARBIDE, 4 FLUTE,CENTRE CUTTING,COATED HIGH PERMORMANCE END MILL OF CUTTING DIA SIZE 06.00 MM.SAP CODE-FBK0500725. Nos
16 290290108R SOLID CARBIDE ENDMILL OFDIA8MM MAKE: ADDISON/TOTEM/MIRANDA/SUMITOMO SOLID CARBIDE, 4 FLUTE,CENTRE CUTTING,COATED HIGH PERMORMANCE END MILL OF CUTTING DIA SIZE 08.00 MM.SAP CODE-FBK0500726. Nos
17 290290110R SOLID CARBID ENDMILL OFDIA10MM MAKE: ADDISON/TOTEM/MIRANDA/SUMITOMO SOLID CARBIDE, 4 FLUTE,CENTRE CUTTING,COATED HIGH PERMORMANCE END MILL OF CUTTING DIA SIZE 10.00 MM.SAP CODE-FBK0500727. Nos
18 290290112R SOLID CARBIDE ENDMILL OF DIA12 MAKE: ADDISON/TOTEM/MIRANDA/SUMITOMO SOLID CARBIDE, 4 FLUTE,CENTRE CUTTING,COATED HIGH PERMORMANCE END MILL OF CUTTING DIA SIZE 12.00 MM.SAP CODE-FBK0500728. Nos
19 296210110R DRILL CHUCK WITH MT-1 ARBOR Heavy duty Industrial keyed,fully hardened and ground for alignment and concenricity, manufactured to DIN-6349 fitted with MT-1 taper mount arbor drill chuck, capacity 0.5 to 6.5mm Nos
20 296210111R DRILL CHUCKWITH MT-1 ARBOR Heavy duty Industrial keyed,fully hardened and ground for alignment and concenricity, manufactured to DIN-6349 fitted with MT-1 taper mount arbor drill chuck, capacity 1.0 to 10mm Nos
21 296210112R DRILL CHUCK WITH MT-2 ARBOR Heavy duty Industrial keyed,fully hardened and ground for alignment and concenricity, manufactured to DIN-6349 fitted with MT-2 taper mount arbor drill chuck, capacity 1.0 to 13.0mm Nos
22 296210113R DRILL CHUCK WITH MT-3 ARBOR Heavy duty Industrial keyed,fully hardened and ground for alignment and concenricity, manufactured to DIN-6349 fitted with MT-3 taper mount arbor drill chuck, capacity 1.0 to 16.0mm Nos
23 296210114R DRILL CHUCK WITH MT-5 ARBOR Heavy duty Industrial keyed,fully hardened and ground for alignment and concenricity, manufactured to DIN-6349 fitted with MT-5 taper mount arbor drill chuck, capacity 5.0 to 20.0mm Nos
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Annexure- Specifications.xlsx
Technical Information / Worksheet • 0.01 MB
pqr conditions.docx
Others - PQR • 0.02 MB
declaration certificate.doc
Others - Declaration • 0.02 MB
tender document.doc
Tender Document • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .