AS PER TENDER NOTICE LOT 01

Scraping old painted surface including disposal of all scraped materials to a distance of 30 M as directed by Engineer in Charge.

Providing, laying, spreading and compacting 63mm to 45mm graded stone aggregate to specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density Grading-II as per Technical Specification Clause 405. compacted thikness 75mm.

Providing, laying, spreading and compacting 53mm to 22.4mm graded stone aggregate to specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density Grading-III as per Technical Specification Clause 405. compacted thickness 75 mm.

Providing and applying Primer Coat with bitumen emulsion (SS1) on prepared surface of Granualar Base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm. Using manual means.

Providing and applying Tack Coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.35 Kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom .

Providing laying & rolling of open graded Premix Carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by Seal Coat .

Providing and laying Seal Coat Type-C sealing the voids in a bituminous surface laid to specified levels, grades and cross falls as per MORD Technical Specification Clause 510.

Brick Edging on both sides of thc road of first class brick 8 cm (3" ) wide and l2 cm. deep laid with mud mortar all including labour & supply of bricks finished to thc required template and in proper alignment and also including dressing and ramming the excavated earth as directcd by Engeineer in charge.