Execution of Balance Works and Rectification Works of Construction of D-Type Quarters at Rengali and OHPC Training Centre, Patia, Bhubaneswar at the Risk and Cost of Previous agency

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

CIVIL WORK (D TYPE QUARTER)

First class Fly ash Brick masonry using bricks of size

25 cm. x 12 cm. x 8 cm. having crushing strength

not less than 75 kg. Per. Sqr. Cm. in cement mortar

of mix( 1:6) with ordinary Portland slag

cement(PSC) and screened & washed sand for

mortar after immersing the bricks for 6 (Six) hours

in water before use in Super Structure including

splays cutting, circular moulding, corbelling,

chamfering and similar such type of works, watering

and curing etc. including cost, conveyance, loading,

unloading, royalties and taxes of all materials, cost

of all labour, scaffolding, sundries, T&P required for

the works etc. complete in all respect as directed by

the Engineer-in-Charge.

10 Ground floor Cum 1.00 4,725.48 4725.48

12 Second floor Cum 1.00 5,355.98 5355.98

12mm cement plaster to out side of brick surfaces

with cement mortar of mix 1:6 (1 cement : 6 fine

sand) including necessary scaffolding, curing etc. all

complete at all floors and all heights.

55 Terrace floor Sqm 377.38 161.82 61069.28

16mm cement plaster to inside of brick surfaces with

cement mortar of mix 1:6 (1 cement : 6 fine sand)

including necessary scaffolding, curing etc. all

complete at all floors and all heights.

60 Terrace floor Sqm 71.79 232.04 16657.29

6 mm cement plaster on RCC surfaces at ceiling/slab

soffit and other locations with cement mortar of mix

61 1:4 (1 cement : 4 coarse sand) including necessary - 0.00

scaffolding, curing etc. all complete at all floors and

65 Terrace floor Sqm 27.90 181.42 5061.67

Supplying, fitting & fixing of Granite Tiles of

minimum Above 0.40 sqm. (20mm thick) of

approved make in floors laid on 20 mm thick cement

mortar (1:4) (1 cement : 4 course sand) and filling

joints with slurry including cost of all materials,

labour T&P etc. required for the work all complete

incl. rubbing as per direction of the Engineer-in-

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 2 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Supplying, fitting & fixing of 10 mm thick & size of

600x600 mm Vitrified floor tiles with water

absorption limit between 0.08% to 3% and

conforming to IS : 15622:2006 (Group B Ib). laid on

20 mm thick cement mortar (1:4) (1 cement : 4

course sand) and filling joints with white cement of

approved quality including cost of all materials,

labour T&P etc. required for the work all complete as

per direction of the Engineer-in-charge (for New

Supplying, fitting & fixing of 10 mm thick & size of

600x600 mm Vitrified floor tiles with water

absorption limit between 0.08% to 3% and

conforming to IS : 15622:2006 (Group B Ib) laid on

12 mm thick cement mortar (1:3) (1 cement : 3

course sand) jointed with slurry mixed with pigment

to match the shades of the tiles etc. complete

including cost of all materials, labour T&P etc.

required for the work all complete as per direction of

the Engineer-in-charge(in skirting)

Supplying, fitting & fixing of 20cm x 30cm Ceramic

wall tiles of premium grade having thickness 6.5mm

to 6.7mm confirming to IS 13753 in dadoes,

skirting and risers of steps laid on 12 mm thick

78 cement mortar (1:3) (1 cement : 3 course sand) - 0.00

jointed with slurry mixed with pigment to match the

shades of the tiles etc. complete including cost of all

materials, labour T&P etc. required for the work all

complete as per direction of the Engineer-in-charge

79 Ground floor Sqm 82.92 820.99 68076.32

81 Second floor Sqm 82.92 854.47 70853.03

Factory made 30mm/32mm flush door shutter

(nonsal hard wood framefixed with 4mm BWR ply on

86 both side of frame) with all labour, iron fittings, and - 0.00

wooden hinged cleats etc fitted and fixed complete

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 3 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Providing & Fixing pristine white UPVC framed sliding

glazed windows with Stainless stell mesh make

:Komerling.Company must have own production

facilities(extrusion & fabrication) & control the entire

cycle from Extrusion to Installation to post sales

service.Providing & Fixing of factory made uPVC

sliding window (whilte colour) complete, comprising

uPVC multi-chambered frame having in-built uPVC

roller track on top & uPVC sash with wall thickness

of 2.0mm(+-0.2) duly reinforced with G.I section

1.6mm , profile shall be manufactured from

tropicalized blend with TiO2 & required

90 addictives.Profile must be colorfast and conform to - 0.00

standard EN12608.The profile sections should have

multi hollow (min 2 to 3 chambers) chamber to

include GI reinforcement with 120 GSM zinc

coated,fitted in continuous length, in closed

chamber. The thckness of GI should be selected to

meet the wind load requirement as per IS 875-Part

III on sash/mullion.Supplier should be submitting

wind load calculation & validation complying with IS -

845-III before materila supply.Minimum steel

reinforcement thickness of 1.2mm to 2.5 mm.UPVC

windows & doors must be fabricated with fusion

welded corners & must.

Supplying and Fixing of M.S. Grills, M.S.Doors, M.S.

Gate etc including cost,conveyance of all

94 materials,priming,and labour for fitting fixing - 0.00

etc.complete as per the instruction of Engineer-in-

98 Terrace floor Kg 138.60 69.65 9653.91

Priming one coat with wall cement primer (water

bound) to make an even finished surface in all floors

and heights to wall surface of approved make and

shade including sand papering, applying putty

99 wherever necessary & cost of scaffolding, staging - 0.00

charges with cost, conveyance, taxes of all

materials, cost of all labour,labour cess T&P etc.

complete as per the direction of the Engineer-in-

charge.(outside)

103 Terrace floor Sqm 377.38 75.70 28568.68

Priming one coat with wall cement primer (water

bound) to make an even finished surface in all floors

and heights to wall surface of approved make and

shade including sand papering, applying putty

104 wherever necessary & cost of scaffolding, staging - 0.00

charges with cost, conveyance, taxes of all

materials, cost of all labour,labour cess T&P etc.

complete as per the direction of the Engineer-in-

charge.(inside)

108 Terrace floor Sqm 71.79 72.23 5185.59

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 4 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Painting two coats with approved anti-fungal

weather seal paints (ISI) of approved colour, shade

on wall surface over a coat of wall primer(ISI) water

bound including sand papering, polishing the

surface, cost, conveyances of all materials and cost

of all labour,labour cess with T&P etc, complete as

per specification & direction of Engineer-in-

charge.Dulux / Berger / Asian

113 Terrace floor Sqm 377.38 92.05 34738.25

Finishing plastered surfaces of walls with cement

based wall putty (Water based) of Dulux / Berger /

Asian make and finishing the surface smooth and

even by sand papering to receive painting in walls,

114 at all heights with staging wherever necessary with - 0.00

cost, conveyance, taxes of all materials, cost of all

labour,labourcess, all T&P etc. required for the work

complete in all respect as per the direction of the

Engineer-in-charge.

118 Terrace floor Sqm 71.79 73.69 5290.39

Painting two coats with approved plastic emulsion

paint over a coat of wall primer of make Dulux /

Berger / Asian to inside surface of walls finished

with Acrylic Wall putty (water based) of make (Birla

/ JK) and finished smooth & even surface to receive

painting using roller to the final coat including cost

119 of scaffolding staging charges with cost, - 0.00

conveyances, taxes of all materials, cost of labour,

T&P required for the work etc. complete for all floors

as per specification & direction of the Engineer-in-

Note :- Sample of Paint & Primer shall be approved

before procurement and use.

123 Terrace floor Sqm 71.79 95.53 6858.13

Painting two coats with approved Enamel Paint on

124 wood work over a coat of Wood Primer in Ground - 0.00

128 Painting one coat primer on Steel work in - 0.00

129 Ground floor Sqm 58.95 60.25 3551.97

131 Second floor Sqm 58.95 63.49 3742.95

132 Terrace floor Sqm 5.73 65.17 373.64

Painting two coats with approved Enamel Paint on

134 Ground floor Sqm 55.54 153.08 8502.17

136 Second floor Sqm 53.06 160.92 8539.27

137 Terrace floor Sqm 4.85 165.07 800.77

2.5 cm thick grading concrete (1:2:2) on roof slab

142 with 6.7mm & down grades size hard granite crusher - 0.00

broken chips on new work .

143 Terrace floor Sqm 491.32 418.06 205398.34

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 5 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

144 CIVIL WORK OF GARAGE. - 0.00

12mm cement plaster to out side of brick surfaces

with cement mortar of mix 1:6 (1 cement : 6 fine

sand) including necessary scaffolding, curing etc. all

complete at all floors and all heights.

16mm cement plaster to inside of brick surfaces with

cement mortar of mix 1:6 (1 cement : 6 fine sand)

including necessary scaffolding, curing etc. all

complete at all floors and all heights.

6 mm cement plaster on RCC surfaces at ceiling/slab

soffit and other locations with cement mortar of mix

169 1:4 (1 cement : 4 coarse sand) including necessary - 0.00

scaffolding, curing etc. all complete at all floors and

Supplying, fitting & fixing of Chequered tiles in floors

of approved make laid on 20 mm thick cement

mortar (1:4) (1 cement : 4 course sand) and filling

joints with slurry including cost of all materials,

labour T&P etc required for the work all complete as

per direction of the Engineer-in-charge

Supplying and Fixing of M.S. Grills, M.S.Doors, M.S.

Gate etc including cost,conveyance of all

173 materials,priming,and labour for fitting fixing - 0.00

etc.complete as per the instruction of Engineer-in-

Priming one coat with wall cement primer (water

bound) to make an even finished surface in all floors

and heights to wall surface of approved make and

shade including sand papering, applying putty

175 wherever necessary & cost of scaffolding, staging - 0.00

charges with cost, conveyance, taxes of all

materials, cost of all labour,labour cess T&P etc.

complete as per the direction of the Engineer-in-

Wall Painting two coats with approved Distemper

177 over a coat of Water Bound Wall cement Primer on - 0.00

Internal Plastered Surface

Finishing wall surface with water proofing cement

179 paint of approved shade on new work two coat to - 0.00

give an even shade

180 Ground floor Sqm 263.85 36.40 9603.18

181 Painting one coat primer on Steel work in - 0.00

182 Ground floor Sqm 69.30 60.25 4175.60

Painting two coats with approved Enamel Paint on

2.5 cm thick grading concrete (1:2:2) on roof slab

185 with 6.7mm & down grades size hard granite crusher - 0.00

broken chips on new work

186 Terrace floor Sqm 215.88 310.88 67112.54

187 CIVIL WORK OF DRAINAGE WORK. - 0.00

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 6 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Earthwork in excavation in hard soil for site leveling,

foundation, pits, trenches and other civil works upto

and including 1.5metre lift and stacking the soil upto

188 a lead of 100 metre and including dewatering, - 0.00

removing slush, shoring and strutting (as required),

complete as per specification and as directed by the

Engineer-In-Charge.

Filling at all depth with available excavated earth

(excluding rock) in Drain sides in layers not

190 exceeding 12 cm in depth: consolidating each Cum 12.00 141.76 1701.07

deposited layer by ramming and watering complete

all as per the directed of the Engineer-In-charge.

Supplying & filling of approved river sand in Drain

and over areas including watering,ramming,

191 consolidating and dressing, labours, tools, taxes etc. Cum 20.00 487.60 9752.02

all complete as per the specification and direction of

Engineer-In-charge.

Providing and laying plain cement concrete 1:4:8 (1

cement: 4 sand : 8 stone agregate 40mm nominal

size) as levelling course in Drain etc. including

tempering, curring, shuttering etc. complete all

depth and height as per the direction of Engineer-In-

Providing, lifting, hoisting and laying Reinforced

cement concrete of M-25 grade as per approved

designs and drawings having a minimum

compressive strength (in work test) 250 Kg. /

Square cm. in 15 cm. cubes at 28 days after mixing

and test conducted in accordance with I.S. 516 using

12 mm. to 20 mm. size black hard crushed broken

granite stone chips and screened and washed sharp

sand for mortar of approved quality from approved

quarry, washed and cleaned ( 20mm. size chips not

to exceeds 25 % ) to be mixed in concrete mixture

with Portland slag cement (PSC) including hoisting,

lowering, laying and compaction concrete by using

vibrators, watering and curing for 28 days, centering

and shuttering then after dismantling and removing

debris from the work site and finishing the exposed

surface smooth providing grooves or beads wherever

necessary including cost, conveyance, loading,

unloading, royalties and taxes of all materials and

cost of all labours, sundries, T & P required of the

work etc. complete in all respect as directed by the

Engineer-in-Charge. But excluding cost and

conveyance of M.S. rods or Tor steel and binding

wires and labour charges for straightening, cutting,

bending etc. of M.S. rods or tor steel tying the grills

and placing in proper position.

194 Drain Bottom slab Cum 20.00 5,360.34 107206.88

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 7 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Supplying, straightening, cutting, bending, placing in

position and binding reinforcement steel work in

RCC/Reinforced brick works as per drawing and

specification including preparation of respective bar

bending schedule and binding (Binding wire to be

used as per the IS code) etc. all complete as per

direction of Engineer-In-Charge. Cold Twisted bars,

Thermo-Mechanically-treated bars.

12mm cement plaster on internal RCC/brick surfaces

in cement mortar 1:4 (1 cement : 4 coarse sand)

198 with a floating coat of neat cement punning Sqm 420.00 150.51 63216.28

including necessary scaffolding, curing etc. all

complete at all floors and all heights.

199 LAND DEVELOPMENT WORK - 0.00

Supplying and filling sand in land areas including

watering, ramming, consolidating and dressing,

labours, tools, taxes etc. all complete as per the

specification and direction of Engineer-In-Charge.

202 ROAD & PAVING WORK - 0.00

Earthwork in excavation in hard soil for site leveling,

foundation, pits, trenches and other civil works upto

and including 1.5metre lift and stacking the soil upto

203 a lead of 100 metre and including dewatering, - 0.00

removing slush, shoring and strutting (as required),

complete as per specification and as directed by the

Engineer-In-Charge.

Supplying of filling sand in foundation and over

areas including watering,ramming, consolidating

205 and dressing, labours, tools, taxes etc., all complete Cum 50.00 373.14 18657.13

as per the specification and direction of Engineer-In-

Providing and laying plain cement concrete 1:4:8

(1 cement: 4 sand: 8 stone agregate 40mm

206 nominal size) as levelling course in foundation and Cum 50.00 4,375.29 218764.62

plinth etc. including tempering, curring ,shuttering

etc.complete all depth and height.

Supplying, fitting & fixing of 25mm thick GRC pavcer

block in floors of approved make laid on 20 mm thick

cement mortar (1:4) (1 cement : 4 course sand) and

filling joints with slurry including cost of all

materials, labour T&P etc required for the work all

complete as per direction of the Engineer-in-charge

ELECTRICAL WORK-Internal Electrical work (2

209 Sub-Head I (modular Wiring Items) - 0.00

Recessed wirring to light point/ fan point/ exhaust

fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor of ISI marked with 20

mm dia PVC flexible non metallic conduit with 6A

modular type switch ISI marked , and ceiling rose

ISI marked of modular type G.I box with cover ,

of suitable size, modular box with 1.5 sq. Mm FRLS

PVC insulated single core multistandard copper

conductor as earth wire including all accessories and

connection as per direction of Engineer -in -Charge.

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 8 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

213 GROUP-C(COMMON ARAE) Nos 24.00 1,180.36 28328.69

Group control of point in Recessed wirring to light

point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper

conductor of ISI marked

with 20 mm dia PVC flexible non metallic conduit

with 6A modular type switch ISI marked and ceiling

rose ISI marked of modular type G.I box with

cover of suitable size, modular box with 1.5 sq. Mm

FR PVC insulated single core multistandard copper

conductor as earth wire including all accessories and

connection as per direction of Engineer -in -

Charge..(Maximum 02 nos point in one circuit)

Supplying,fixing of 6A Plug on the separate board

with complete fitting by 01 no of 6A switch &

socket(modular type) with suitable size modular

box & cover including supplying of all required

accessories of ISI marked as approved as per

direction of engg-in-charge.

Supplying,fixing of 6A Plug on the separate board

with complete fitting by 01 no of 6A switch &

socket(modular type) with suitable size modular

box & cover including supplying of all required

accessories of ISI marked as approved as per

direction of engg-in-charge.

Supplying,fixing of 16A Plug on the separate board

with complete fitting by 01 no of 6A switch &

socket(modular type) with suitable size modular

box & cover including supplying of all required

accessories of ISI marked as approved as per

direction of engg-in-charge.

Receass wiring for circuit/submain wiring with the

following mentioned size PVC insulated, copper

conductor, single core cable or any other

equivallent reputed make ISI marked as approved,

in recessed PVC conduit Heavy duty of mentioned

size or any other equivallent reputed make ISI

marked as approved) as required as per direction of

Engg.-in-Charge..

2 nos single core 1.5 sq. mm copper wire for phase

and neutral and 01 no of single core 1.5 sq. mm

219 copper wire for earth continuty conductor. In 20 mm Mtr 92.00 142.23 13084.77

dia non metallic heavy duty flexible conduit (LDB to

LSB/LIGHT CKT)(2X1.5+1X1.5)

4 nos single core 4 sq. mm copper wire for phase

and neutral and 02 nos of single core 2.5 sq. mm

223 copper wire for earth continuty conductor in 32 mm Mtr 108.00 269.89 29148.44

dia non metallic heavy duty flexible conduit.(PDB to

PSB/GAYSER. POINT/AC POINT) (4X4+2X2.5)

2 nos single core 6 sq. mm copper wire for phase

and neutral and 01 no of single core 2.5 sq. mm

224 copper wire for earth continuty conductor in 25 mm Mtr 12.00 211.66 2539.91

dia non metallic heavy duty flexible conduit .(PANEL

TO BDB EACH QTR) (2X6+1X2.5)

4 nos single core 6 sq. mm copper wire for phase

and neutral and 02 nos of single core 2.5 sq. mm

225 copper wire for earth continuty conductor in 32 mm Mtr 24.00 321.41 7713.79

dia non metallic heavy duty flexible conduit.(PANEL

TO BDB EACH QTR)

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 9 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Supplying and fixing following size/ modules, GI box

along with modular base & cover plate for modular

switches in recess etc as required as per direction of

Engg.-in-Charge.

Supplying and fixing of following sizes of medium

class PVC conduit along with accessories in

232 surface/recess including cutting the wall and making - 0.00

good the same in case of recessed conduit as

required as per direction of Engg.-in-Charge .

Supply and fixing modular type indicator on the

235 existing switch box/cover of Anchor make as Nos 2.00 117.59 235.18

required as per direction of Engg.-in-Charge.

Supplying and installation of AC starter Modular type

or any other equivalent reputed make as approved

coil voltage-415 Volt A.C. & O/L range of suitable

range range on mod Box of suitable size including

modular coveras required as per direction of Engg.-

Supplying and fixing step regulator modular type on

the existing switch box including connections but

excluding box etc. as required as per direction of

Engg.-in-Charge.

Supply and fixing CALL bell (Ding dong type)

238 /Buzzer on the existing switch box/cover. as Nos 2.00 227.34 454.67

required as per direction of Engg.-in-Charge.

S/F of Bakelite angle holder/batten holder (make-

Anchor/Havells/Panasonic or equievalant reputed

239 make A catagory ISI marked as approved )of ISI Nos 12.00 64.95 779.44

marked conforming to IS-1258/1987 in place of

ceiling rose as per direction of Engg.-in-Charge .

Supplying,fixing of Blanking plate(modular type) in

existing switch box(including supplying of all

required accessories of ISI marked as approved as

per direction of engg-in-charge..

241 Sub-Head II (Light fitting Fixture & Fan) - 0.00

Supplying, installation, of exhaust fan of heavy duty

300 mm sweep with louvers any other equivalent

242 reputed make star rated as approved) of exhaust fan Nos 12.00 3,422.38 41068.53

in the existing wall, including fixing & conntection as

required as per direction of Engg.-in-Charge.

Supplying, installation, of exhaust fan of heavy duty

300 mm sweep with louvers any other equivalent

242 reputed make star rated as approved) of exhaust fan Nos 24.00 684.48 16427.41

in the existing wall, including fixing & conntection as

required as per direction of Engg.-in-Charge.

Supplying, installation, testing and commssioning of

1200 mm sweep white/milky colour ceiling fan of or

any other equivalent reputed make star rated as

approved including wiring the down rod of standard

length (upto 30 cm) with 1.5 sq mm PVC insulated,

copper conductor, single core cable etc. as required

as per direction of Engg.-in-Charge .(With out fan

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 10 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

SITC of energy efficient LED tube light fittings with

decorative batten and LED tube light having power

rating not more than 20 watt and lumen output not

less than 1800 lumen complete with electronic driver

and all other accessories with diffuser i/c connection

etc as required. (Similar to

SITC of Sleek LED 18 watt surface square type

fitting with extruded polycarbonate housing,High

optically efficient diffuser, complete with all

accessoriesetc. directly on wall, including connection

246 with 1.5 sq. mm FRLS PVC insulated, copper Nos 2.00 2,205.06 4410.12

conductor, single core cable and earthing etc. as

( Make :Make: Lighting Technology

/wipro/PHILIPS/BajajHavells make)

Supplying and fixing extra conduit down rod of 20

cm length G.I. pipe 15 mm dia, heavy gauge

including painting etc. as requiredas required as per

247 direction of Engg.-in-Charge . Nos 2.00 34.72 69.43

(Note : More than 5 cm length shall be rounded to

the nearest 10 cm and 5 cm or less shall be

ignored)of ISI mark as approved.

248 TELEPHONE - 0.00

Supplying and drawing 4 pair Telephone WIRE

protected with PVC sheath in the with surface/

recessed steel/ PVC conduit as required as per

direction of Engg.-in-Charge.

Supplying and telephone socket socket on the

existing modular plate & switch box including

connections but excluding modular plate etc. as

required as per direction of Engg.-in-Charge.

Supply, Delivery, Installation & Testing of 24 port

251 PoE Giga 10/100/1000 switche as per direction of No 2.00 2,799.72 5599.44

Engr.-in-charge.ORDINARY TYPE

Supplying & Commissioning of IP Telephone Hand

Set as per direction of Engg.-in-Charge.

Supplying and drawing RG6 TV Cable protected with

PVC sheath in the with surface/ recessed steel/ PVC

conduit as required as per direction of Engg.-in-

254 BDBS,DB,AC DB,FLOOR PANELS,MCBS - 0.00

Supplying and fixing of following mentioned way,

three pole/single pole and neutral, 1.6 mm thickness

sheet steel,double door MCB distribution board, 415

volts/240 volts, on surface/recess, complete with

terminal blocks, duly prewired with suitable size FR

PVC insulated copper conducter up to terminal

blocks, tinned copper busbar, neutral busbar, earth

bar, din bar. , or any other equivallent A catagories

reputed make ISI marked as approved as per

direction of Engg.-in-Charge.

4 Way(8+12) Way TPN MCB DD DB Horizontal Type

as per IEC 61439-3 suitable for Flush mounting and

Surface mounting with 100A Copper Bus Bar for

each phase, with neutral Bus bar, Earth Bar & Cable

ties for cable management, prefitted masking sheet,

IP43-IK09 with metal door

2+4 way MCB Enclosure DB (GLAZED door)(only

each EM. CONNECTION UPS LOAD)

Supplying and fixing 6 amps to 32 amps rating, 240

volts, C series, single poles MCB of make or any

other equivallent A catagories reputed make ISI

marked as approved in the existing MCB DB

complete with connections as per direction of Engg.-

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 11 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Supplying and fixing 63Amps TPN 415 volts,

RCCB,300mA Make-Equievalant higher model of

Legrand/Snheider/Siemens / L&T/Panasonic /ABB or

259 equievalant reputed make & model A catagory ISI Nos 15.00 2,949.78 44246.77

marked as approved in the existing MCB DB in the

existing MCB DB complete with connections as per

direction of Engg.-in-Charge.

260 (Earthing) INSTALLATION - 0.00

S/IT/C of materials and installation of pipe earth

electrode made out of 50mm dia class B G.I. pipe of

3.0 metre long with arrangements for fitting/

termination of G.I. flat / wire with G. I. nut bolts

& washers including cost of burnt wood charcoal,

salt, foreign soil, water pouring arrangements, brick

masonary enclosure on top with removable RCC

cover complete with labour for excavation of pit in

all kinds of soil & rock as required and as per

direction of Engineer-in-charge.

Providing and fixing 4 mm dia copper wire on

262 surface or in recess for loop earthing as required.as Mtr 36.00 104.15 3749.39

per direction of Engg.-in-Charge.

Providing and fixing 25mm x 5 mm copper strip on

surface or in recess for connections etc. as required

as per direction of Engg.-in-Charge.(DOUBLE RUN

TO MAIN PANEL & APFC PANEL ,AC PANEL)

264 CABLING AND END TERMINATION MAIN AREA - 0.00

Supplying of one number PVC insulated armoured

and PVC sheathed AL. conductor power cable of 1.1

KV grade of following size cables as per direction of

Engg.-in-Charge.

3.5core x 120 sq mm (CONTROL ROOM TO MAIN

PANEL DOUBLE RUN AS SPARE)

267 LAYING OF CABLE - 0.00

Laying of PVC Insulated PVC Seated /XLPE power

cable of 1.1 kv grade size exceeding 120 SQ. MM

but not exceeding 400 SQ. MM direct in ground in

268 the trench in one horizental formation including Mtr 20.00 156.78 3135.69

excavation ,sand coushing protection covering and

refilling the trench etc as required as per direction of

Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power

cable of 1.1 kv grade size exceeding 25 SQ. MM

269 but not exceeding 400 SQ. MM direct in ground in Mtr 6.00 60.47 362.84

the EXISTING PIPE etc as required as per direction

of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power

cable of 1.1 kv grade size exceeding 25 SQ. MM in

open duct 400 SQ. MM OPEN DUCT etc as required

as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power

cable of 1.1 kv grade size not exceeding 400 SQ.

271 MM From 120 SQ. MM in surface with shaddle and Mtr 6.00 137.75 826.48

screw etc as required as per direction of Engg.-in -

Supplying and making end termination with brass

compression gland and aluminium lugs for following

mentioned size cable.as per direction of Engg.-in-

Providing,fixing and laying of fallowing dia G.I. pipe

(medium class) in ground complete with G.I fitting

incl. trenching(75 mm depth)and refilling as per

direction of Engg.-in-Charge.

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 12 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Providing,fixing and laying of fallowing dia HDPE

pipe (medium class) in ground complete with fitting

incl. trenching(75 mm depth)and refilling as per

direction of Engg.-in-Charge.

CABLE TRAY /RACE WAY FOR DISTRIBUTION OF

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 ,

CARBON STEEL WIRE MESH CABLE TRAYS with

internal dimensions of size 54mm(H) x 200mm(W),

of reputed make ISI marked as approved .The Load

bearing capacity of the Cable Trays should be

minimum of 104.8Kg/meter at the span of

1.5Meter as per UL specifications.(With all

accessories,bend,cover,supporter)WITH REQUIRED

SIZED JUNCTION BOX ,COVER CONNECTOR as

required as per direction of Engg.-in-Charge.

LIGHTENING PROTECTION FOR

288 CONSTRUCTION OF PROPOSED D TYPE QTRS - 0.00

AIR TERMINAL & ACCESSORRIES LIGHTNING

ARRESTER+ MAST:

Providing and fixing of lightning conductor finial

made of 25 mm dia 300 mm long, G.I tube,having

single prong at top, with 85 mm dia 3 mm thick G.I

base plate including holes etc complete as required

with as per direction of Engg.-in-Charge.(RATE

REFERING OSR 2018 SOR NO-4.2) .The entire LA

system should be Replacement Warranty will be 5

Reveting, sweating and soldering of copper / G.I.

tape ( with another copper / G.I. tape, base of the

finial or any other metallic object) as required .as

per direction of Engg.-in-Charge. (RATE REFERING

OSR 2018 SOR NO-4.4) The entire LA system

should be Replacement Warranty will be 5 years

Providing and fixing of G.I. tape 20 mm x 3 mm

thick on parapet or surface of wall for lightning

conductor complete as required. (For horizontal run)

as per direction of Engg.-in-Charge.(RATE REFERING

OSR 2018 SOR NO-4.7) The entire LA system

should be Replacement Warranty will be 5 years

Providing and fixing of G.I. tape 20 mm x 3 mm

thick on parapet or surface of wall for lightning

conductor complete as required. (For virtical run) as

per direction of Engg.-in-Charge. (RATE REFERING

OSR 2018 SOR NO-4.8) The entire LA system

should be Replacement Warranty will be 5 years

Providing and fixing of testing joint, made of 20 mm

x 3 mm thick G.I. strip, 125 long with 4 nos of G.I.

bolts, check nuts and spring washer etc complete as

293 required as per direction of Engg.-in-Charge. (RATE Each 1.00 69.43 69.43

REFERING OSR 2018 SOR NO-4.12) The entire LA

system should be Replacement Warranty will be 5

Providing and laying of G.I. tape 32 mm x 6 mm

from earth electrode directly in ground as required

as per direction of Engg.-in-Charge. .(RATE

REFERING OSR 2018 SOR NO-4.14) The entire LA

system should be Replacement Warranty will be 5

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 13 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Maintenance free Safe Earthing Electrodes with ISI

G.I. pipe dia 75mm as Secondary electrode with wall

thickness of 2.6 mm and the Primary Earthing

Electrode will be 50mm X 6mm X 1no M.S. hot

dipped galvanized strip filled with a highly

conductive & non-corrosive compound in between

the Primary Earthing and the secondary Earthing,

the Surface Area in will be 7,06,500sqmm for 3mtrs

length and Cross Sectional Primary conducting area

295 is 300 sq.mm. An Solid G.I. Base plat seals the unit SET 2.00 15,630.28 31260.55

at the bottom. as per direction of Engg.-in-

Charge.(MES-GFC ground Filling compound will be

provided in 25 kgs Bags.)(MES-GFC ground Filling

compound will be provided in 25 kgs Bags.)(2 bags

required for each earthing electrode.)(FOR

lightening protection & Building Electrification).The

entire earthing system should be Replacement

Warranty will be 5 years.Make-OBO/Star-x/ABB or

equievalant reputed make & model A catogory.

296 EXTERNAL ILLUMINATION (LIGHT SYSTEM) - 0.00

Supply ,Installation testing commissioning of 45W,

High efficient LED with aluminium housing in Pure

Polyster UV resistant powder coated black finish and

Top maintainable product with top opening die cast

cover with acrylic clear glass reflector.CRI>70, IP66,

Ambient temp-0 to 45DegC, Driver efficiency>85%,

CCT-4000/5700K,THD<10%,Powerfactor>0.95,

Surge protection-4 kV, Multistage Isolated Constant

Current-Constant Voltage operated driver with range

150-300V AC and Safety Extra Low Voltage Safe

level<60V DC as per IEC standard. Luminaire lumen

≥ 4275 lumens (95 lm/W). Similar to Wipro Make

LP07-501-XXX-57-CL or equivalent Philips/ LT/Trilux

make. & model A catogory, ISI marked as approved,

with proper model make having warrantied for a

period of 5 years . The luminaire to be installed in 6

mtr long GI hot dip galvanized smart pole with anti

corroson,,uv rays stabilized,metal post with covered

Fumatech/Valmount/Transrail/RR/UTKASH /Utkal

Galvanizer make equievalant make with proper

model complete with SA bracket internal JB with 4

way connector and MCB as per the pole drawing

and direction of EIC against which inspection mat

take place. It should be installed after making

proper size RCC foundation by considering RCC

foundation by using M20 grade RCC & Fe 415 grade

reinforcement and fixing the 4 nos. En 8 grade J

Supplying, Erection, Fixing, connection & testing of

45 LED GATE Light of WIPRO make or equvalant of

Philips/LT/PANASONIC or equievalant reputed make

A catagory ISI marked as approved maintenance

free having 2 years warranty G.I P ipe with braket

including MCB box & including with foundation as

per the Drawing for inspection as required & as per

direction of Engg.-in-Charge.

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 14 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Supplying, Erection, Fixing, connection & testing of

120 W LED special type Flood Light of die cast

alluminium housing with frame & toughened glass

,IP 66 protection videWipro or equvalant reputed

make of Philips/LT/WIPRO Panasonic/philips/wipro

299 or equievalant reputed make & model A catogory, Sets 2.00 17,130.93 34261.85

ISI marked as approved having 2 years warranty

as approved make G.I cover box including MCB box

& including Auto On off provision with foundation as

per the Drawing for inspection as required & as per

direction of Engg.-in-Charge.

Supplying, Erection, Fixing, connection & testing of

8W, High efficient LED with Aluminium housing with

clear toughened glass diffuser.CRI>70, IP65, CCT -

2700K, Ambient temp-0 to 45 DegC, Driver

efficiency>85%,THD<25%, Powerfactor>0.95,

Surge protection-2 kV, Multistage Isolated Constant

Current-Constant Voltage driver and Safety Extra

Low Voltage Safe level<60V DC as per IEC standard.

Luminaire lumen ≥ 600 lumens (75 lm/W). Similar

to Wipro Make LF05 or equivalent Philips/ LT/Trilux

make. as per the Drawing for inspection as required

& as per direction of Engg.-in-Charge.

Supplying ,installation & fixing of 11W, High efficient

LED with extruded Aluminium housing with PC

diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-

0 to 45DegC, Driver efficiency>80%,THD<25%,

Powerfactor>0.9, Surge protection-2 kV,

Multistage Isolated Constant Current-Constant

301 Voltage driver and Safety Extra Low Voltage Safe Sets 6.00 7,232.24 43393.42

level<60V DC as per IEC standard. Luminaire lumen

≥ 565 lumens (51 lm/W). Similar to Wipro Make

LB12-131-XXX-65-05 or equivalent Philips/ LT/Trilux

make. including with foundation as per the Drawing

for inspection as required & as per direction of

Engg.-in-Charge.

Supply of materials and installation of pipe earth

electrode made out of 50mm dia class B G.I. pipe of

3.0 metre long with arrangements for fitting/

termination of G.I. flat / wire with G. I. nut bolts

& washers including cost of burnt wood charcoal,

salt, foreign soil, water pouring arrangements, brick

masonary enclosure on top with removable RCC

cover complete with labour for excavation of pit in

all kinds of soil & rock as required and as per

direction of Engineer-in-charge.

Providing and fixing 4 mm dia copper wire on

303 surface or in recess for loop earthing as required as Mtr 321.00 104.15 33432.02

per direction of Engg.-in-Charge.

Providing and fixing 25mm x 5 mm copper strip on

304 surface or in recess for connections etc. as required Mtr 23.00 576.74 13265.07

as per direction of Engg.-in-Charge.

305 CABLING - 0.00

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 15 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Supplying and laying of one number PVC insulated

armoured and PVC sheathed XLPE AL. conductor

power cable of 1.1 KV grade

POLYCAB/FINOLEX/HAVELLS or equievalant reputed

ISI MARKED MAKE of following size cables as per

direction of Engg.-in-Charge.Ncessary test report &

Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free

after sales service within warranty period for

acceptance of materials

307 4core x 10 sq mm (OFP TO IND. TIMER PANEL) Mtr 66.00 149.95 9896.37

Laying of PVC Insulated PVC Seated /XLPE power

cable of 1.1 kv grade size not exceeding 25 SQ. MM

direct in ground in the trench in one horizental

formation including excavation ,sand coushing

protection covering and refilling the trench etc as

required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power

cable of 1.1 kv grade size not exceeding 120 SQ.

310 MM From 25 SQ. MM in surface with shaddle and Mtr 21.00 137.75 2892.67

screw etc as required as per direction of Engg.-in -

Supplying and making end termination with brass

compression gland and aluminium lugs for following

mentioned size cable.as per direction of Engg.-in-

S/I/T&Commissioning of LT OUT DOOR FLOOR

mounted cubical type MCB ENCLOSURE made out

by 2mm CRCA steel sheet duly derusted & pented by

simens gray powder cote paint is designed as G.A

drawing. (FOR USE) with 20A TPN MCB 01

313 NOLegrand/Schneider/L&T/ABB or equievalant make Set 1.00 2,289.05 2289.05

& model as per direction of Engg.-in-Charge.

Ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product

& to avail free after sales service within warranty

period 2 years of acceptance of materials

Supplying,laying of 3cx2.5 sq.mm copper flexible

cable with insulated cover of reputed make,ISI

marked with all other concerned materials as per

direction of Engg.-in-Charge. Ncessary test report &

Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free

after sales service within warranty period for

acceptance of materials

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 16 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Providing,fixing and laying of fallowing dia HDPE

pipe (medium class) in ground complete with fitting

incl. trenching(75 mm depth)and refilling as per

direction of Engg.-in-Charge. Ncessary test report &

Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free

after sales service within warranty period for

acceptance of materials

S/I/T&Commissioning of LT OUT DOOR FLOOR

mounted cubical type timer panel with 32A 4P MCB

,40A TP CONTACTOR ,TIMER with 15 nos 10A SP

MCB C as per direction of Engg.-in-Charge.

.(Equievalant model each item of

317 Legrand/Schneider/L&T/ABB or equievalant make & Set 1.00 24,830.16 24830.16

model)Ncessary test report & Warrnaty certificate to

be submitted to the department for genuinity of

product & to avail free after sales service within

warranty period for 2 years after acceptance of

379 RAIN WATER PIPE - 0.00

380 Pvc Pipe 100 mm of 6 kg /cm2 Pr Mtr 80.00 560.39 44831.52

399 Internal PH work - 0.00

Providing and fixing 600x450 mm beveled edge

mirror of superior glass (of approved quality)

406 complete with 6 mm thick hard board ground NOS 4.00 643.83 2575.30

fixed to wooden cleats with C.P. brass screws

and washers complete.

Providing and fixing 600x120x5 mm glass shelf

with edges round off, supported on anodised

aluminium angle frame with C.P. brass brackets

and guard rail complete fixed with 40 mm long

screws, rawl plugs etc., complete. Hindware(cat

C.P. Soap Dish holder.

(As per Cat no.F450022 of Hindware)

Towel Rail 600 mm long .

(As per Cat no. F890011 of Hindware)

Wall mixture no Telephonic Shower

410 Arrangement for Bath & Shower system No 2.00 4,150.52 8301.05

Supplying, fitting and fixing SS grating or top

415 grating or Jali with connection pipe for Floor - 0.00

trap/Floor wash as per approved design.

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 17 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Providing all materials, labour, T&P for laying/fixing

of following dia CPVC pipes SDR-11 as per IS-

15778/2007 with ISI mark including fixing of

required size CPVC fittings like bend, Tee, elbow,

offsets etc. and the same fixed on wall or floor with

holder bat clamps screw in all floor or laying in

419 trenches including excavation of earth work in all - 0.00

kinds of soil & backfilling the trenches as per

specification & testing the joints with required water

presure.The cost inclusive of all

taxes,duties,transportation scaffolding etc. as per

specification and direction of Engineer-in-charge.

Make:Supreme/ASHRIVAD/AJAY.

420 Ground Floor - 0.00

423 1ST Floor - 0.00

426 2ND Floor - 0.00

Providing and fixing chlorinated Vinyl Chloride CPVC

Sch-80 Pipes conforming to ASTM-441 having

thermal stability for hot and cold water

supply,including all CPVC Plain & Brass threader

fittings including fixing the pipe with clamps at 1.00

mtr spacing.This includes jointing of pipes & fittings

with one step CPVC Solvent cement and testing of

joints complete as per specification and direction of

Engineer-in-charge.

Make:Supreme/ASHRIVAD/AJAY.(Terrace line)

Providing all labour,T&P for cutting holes in bricks or

stone masonry wall for taking pipes in all floors and

making good the damages with cement concrete

444 1:2:4 finished smooth with CP 1:4 to original shape - 0.00

including cost of all materials, curing, conveyance,

taxes, duties etc. all complete as per specification &

direction of Engineer-in-charge.

For 15mm to 50mm dia pipe to pass in 125mm to

250mm thick wall

446 Ground Floor No. 2.00 48.72 97.43

For 75mm to 150mm dia pipe to pass in 250mm

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 18 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Providing all labour,T&P and cutting holes in RCC

chajja/roof/floor for taking pipes through and

453 making good the damages with supply of all required - 0.00

materials etc. complete as per the direction of the

Engineer-in-charge.

Providing, laying and jointing PVC SWR soil, waste

and vent pipes under floor /suspended under ceiling

/ fixed on the wall face conforming to IS:15905-

2011 , ISO-6594 Includes necessary fittings like

457 (plain or door)tees, bends, collars, crosses reducers, - 0.00

Y, etc, of approved make, drip seal joint, suspended

under ceiling / embedded in floor. Includes making

connection with sanitary fittings,of approved make

etc all complete .(As per Supreme/Kishan etc)

464 100mm Single Branch Door Tee Nos. 2.00 689.85 1379.70

466 75 mm Single Branch Plain "Y" 45 D Nos. 2.00 617.06 1234.12

468 100mm Single Branch Door 'Y' 45D Nos. 2.00 702.17 1404.34

469 100 mm Shielded (SS - 304) Coupling Nos. 2.00 542.03 1084.05

470 75 mm Shielded (SS - 304) Coupling Nos. 2.00 500.59 1001.18

482 32mm elbow 90 degree Nos. 1.00 62.74 62.74

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 19 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

486 20mm elbow 90 degree Nos. 2.00 15.12 30.24

Providing, laying trench pipe and jointing PVC SWR

TYPE-B pipes and fittings etc complet.

489 EXTERNAL WATER SUPPLY WORKS - 0.00

Providing and fixing chlorinated Vinyl Chloride CPVC

Sch-80 Pipes conforming to ASTM-441 having

thermal stability for hot and cold water

supply,including all CPVC Plain & Brass threader

fittings including fixing the pipe with clamps at 1.00

mtr spacing.This includes jointing of pipes & fittings

with one step CPVC Solvent cement and testing of

joints complete as per specification and direction of

Engineer-in-charge.

Make:Supreme/ASHRIVAD/AJAY.

(ii) 65mm dia (STORAGE OHT TANK TO BUIDING

UGR TANK WATER SUPPLY)

Providing & fixing male/ female screwed end full

way lever operated forged brass ball valve of brass

492 body with forged brass hard chromeplated ball & - 0.00

teflon seat tested to a pressure 15 Kg / sqcm with

(threaded joints) complete as required.

A) Earth work in ordinary soil with initial lead and lift

including rough dressing in layers not exceeding

495 0.3m in depth and the Earth transported by CUM 2.00 208.75 417.50

transport vehicles as directed by the Engineer-in-

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

496 not exceeding 20cm in depth, consolidating each CUM 2.00 141.76 283.51

deposited layer by ramming and watering, lead up to

50 m and lift upto 1.5 m.

Supplying all labour, T&P for the Carriage of

excavated earth by mechanical means of transport

within 5.00 K.M. lead including hire and running

charges of vehicles, labour charges for loading and

unloading as required for the work etc. complete as

per the direction of the Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride

(PVC) pipes, having thermal stability for hot & cold

water supply, including all PVC plain & brass

threaded fittings. This includes jointing of pipes &

fittings with one step PVC solvent cement,treaching

refiling and testing of joints complete as per

direction of Engineer in Charge.

Supplying all materials, labour, T&P, fitting & fixing

of 50mm dia brass / GM Full way Valve of approved

make including supply of all necessary jointing

500 materials such as red lead paint, yarns etc. including NOS 2.00 3,268.28 6536.57

cost, conveyance & taxes of all materials, T&P etc.

all complete as per P.H. specification and as per the

direction of the EIC.

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 20 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous

Balance Works & Rectification Works of D-Type Quarters at Rengali, OHPC, Odisha

Bill of Quantities

Sl. No. Description of Item Unit Qty Rate Amount

Providing and fixing C.I. sluice valves (with

cap)complete with bolts,nuts, rubber insertions etc.

(the tail pieces if required will be paid Separately

Providing & fixing of CI body non return valve of

503 approved make with high tensile bress rising stem - 0.00

suitable for the system pressure as per IS 780

Supplying all materials, labour, T&P, fitting & fixing

of different size bourden type pressure gauge of

reputed make (0-10 kg/sqcm) with valves, piping,

fitting of approved make including supply of all

505 necessary jointing materials such as red lead paint, SET 1.00 3,359.66 3359.66

yarns etc. including cost, conveyance & taxes of all

materials, T&P etc. all complete as per P.H.

specification and as per the direction of the Engineer-

in-charge. (MR)

Providing and fixing C.I. double acting air valve of

approved quality with bolts, nuts, rubber insertions

etc. complete (The tail pieces, tapers etc if required

will be paid separately) :

510 Syntex Water Tank For Domestic Water - 0.00

5000ltr ( India mart ,Model name-CCWS.300.01,

Item Code-CCWS.300.01.DW)

Supply of As-Built Drawings for Building including

the services like Electrical System, Firefighting

System, Water Supply & Sewerage System, ELV

System (EPABX, LAN, CCTV), DG cabling, etc.,

TOTAL FOR OSR/DSR AMOUNT(A) 91,94,710.47

TOTAL FOR NON OSR/DSR AMOUNT*B) 10,00,000.00

GRAND TOTAL (A+B) #########

GRAND TOTAL (A+B) #########

Authorised Signatory

Bidder BOQ of D -Type Quarter Page 21 of 53 Digitally signed byNBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Balance Works/ Rectification work of OHPC Training Centre, Patia, Bhubaneswar

Bill Of Quantities

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

1 A OSR ITEMS:

2 1 CONSTRUCTION OF G+4 STORIED TRAINING HOSTEL

3 CIVIL WORK G+4 STORIED TRAINING HOSTEL

Diluting and injecting chemical emulsion (to be supplied free of

cost at site of work) for PRE CONSTRUCTIONAL Anti-termite

treatment and creating a continuous chemical barrier

under and all-round the column pits, wall trenches,

4 11 basement excavation, top perimeter of building, expansion

joints, over the top surface of consolidated earth on which

apron is to be laid, surroundings of pipes and conduits etc.

complete as per specifications (plinth area of the building

at ground floor only shall be measured for payment).

5 12 Various Floors Sqm 50.00 142.88 7,143.79

Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm.

having crushing strength not less than 75 kg. Per Sqr. Cm. in

cement mortar of mix (1:6) with approved grade cement and

screened & washed sand for mortar after immersing the bricks

for 6 (Six) hours in water before use in Superstructure

6 17 including splays cutting, circular moulding, corbelling,

chamfering and similar such type of works, watering and

curing etc. including cost, conveyance, loading, unloading,

royalties and taxes of all materials, cost of all labour,

scaffolding, sundries, T&P required for the works etc.

complete in all respect as directed by the Engineer-in-charge

16mm cement plaster on internal smooth side of

RCC/brick surfaces with cement mortar of mix 1:6 (1 cement :

6 fine sand) including necessary scaffolding, curing etc. all

complete at all floors and all heights.

Factory made 30mm/32mm flush door shutter (nonsal

hard wood framefixed with 4mm BWR ply on both side of

frame) with all labour, iron fittings, and wooden hinged cleats

etc fitted and fixed complete in all respect

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 22 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Factory made GIRID FRP or called GRP sandwich composite

door shutter of 32mm thick laminated with two GRP skin with

good grain finish fabricated using UV stabilised isoppthalic gel

coat and one layer of 450 gsm E-glass chopped strand mat

(CSM) impregnated with ortopathilic resin The thickness of the

skins shall not be less than 1.50mm . Expanded polysryne (

EPS) structural foam panel of 29 mm tickness and a density of

20kg/cu.mts shall be used as core material wooden

reinforcements made of sesasoned sal wood block of cross

section not less than 28mm x 32mm and also necessary sal

wood reinforcements for fitting the metal fittings such as lower

bolts ,aldrops, handles etc. shall be provided . A structural

adhesive compatible with (EPS)foam shall be used for bending

the core material. the sal wood reinforcements and the skin

The material and process for manufactuing te door shutter

shall conform to RV -TIFAC components design centre's

standards and specification and the door shutters tested in

conformation to IS 4020-1998. The Finish of door shutter will

be plain colour as per specification and direction of the

Engineer in Charge. etc. complete

Providing & Fixing pristine white UPVC framed sliding glazed

windows with Stainless stell mesh make

:Fenesta.Company must have own production

facilities(extrusion & fabrication) & control the entire cycle

from Extrusion to Installation to post sales

service.Providing & Fixing of factory made uPVC sliding

window (whilte colour) complete, comprising uPVC

multi- chambered frame having in-built uPVC roller track

on top & uPVC sash with wall thickness of 2.0mm(+-0.2) duly

reinforced with G.I section 1.6mm , profile shall be

24 153 manufactured from tropicalized blend with TiO2 & required

addictives.Profile must be colorfast and conform to

standard EN12608.The profile sections should have multi

hollow (min 2 to 3 chambers) chamber to include GI

reinforcement with 120 GSM zinc coated,fitted in

continuous length, in closed chamber. The thckness of GI

should be selected to meet the wind load requirement as

per IS 875-Part III on sash/mullion.Supplier should be

submitting wind load calculation & validation complying

with IS -845-III before materila supply. Minimum steel

reinforcement thickness of 1.2mm to 2.5 mm.

Providing & Applying priming coat with Cement primer

of approved brand and manufacture on plaster surface as

per the instruction of Engineer-In-Charge at all elevations

including all material & labour complete.

Providing and applying to outside walls with two or more coats

of Anti-Fungal Weather coat paint including scaffolding

and cleaning the surface before application of approved colour

and manufacture as per specification, instruction of

Engineer-In- Charge at all elevations including all material

labour complete.

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 23 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Providing and applying white cement based putty of

average thickness 1 mm of approved brand and manufacturer,

over the plastered wall on interior surfaces to prepare the

surface even and smooth as per the instruction of Engineer-In-

Charge at all elevations including all material & labour

Preparing surface and painting at all height with two or

more coats of interior Plastic Emulsion "Royale Shyne" of

Asian Paints or equivalent of approved shade as per the

instructions of the manufacturers; giving uniform shade etc in

all heights of walls etc. including interior wall primer &

providing scaffolding, cleaning, curing and supply of all

materials and labour complete as per drawing,

design and direction of Architect/Engineer-In-Charge.

Supplying of filling sand in foundation and over

areas including watering,ramming, consolidating and

dressing, labours, tools, taxes etc., all complete as per the

specification and direction of Engineer-In-charge.

Providing and laying plain cement concrete 1:4:8 (1 cement:

4 sand: 8 stone agregate 40mm nominal size) as

68 217 levelling course in foundation and plinth etc. including Cum 35.00 4,375.29 1,53,135.23

tempering, curring ,shuttering etc.complete all depth and

Supplying, fitting & fixing of 25mm thick GRC pavcer block in

floors of approved make laid on 20 mm thick cement

mortar (1:4) (1 cement : 4 course sand) and filling

joints with slurry including cost of all materials, labour T&P

etc required for the work all complete as per direction of the

Engineer-in-charge

71 222 ELECTRICAL WORK-Internal Electrical work

72 223 Sub-Head I (modular Wiring Items)

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 24 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Recessed wirring to light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated

copper conductor of ISI marked Make Finolex/Anchor/

Polycab/ HAVELLS/ RR KABLE/KEI or equievalant

reputed make A catagory ISI marked as approved with

20 mm dia PVC flexible non metallic conduit FRLS type ISI

marked Make-AKG/Anchor/Havells or equievalant

reputed make A catagory ISI marked as approved 6A

modular type ( falme retradant type) switch ISI marked

Make-Schneider(Zencelo)/legrand ( Arteor)/Panasonic

(vision) or equievalant reputed make & model A catagory

ISI marked as approved, and ceiling rose ISI marked Make-

Anchor/Havells of modular type G.I box with metallic cover

plate (both side) ( falme retradant type) Make-

Schneider(Zencelo) /legrand( Arteor) / Panasonic

(vision)or equievalant reputed make & model A catagory

ISI marked as approved of suitable size, modular box with

1.5 sq. Mm FRLSH PVC insulated single core multistandard

copper conductor as earth wire including all accessories and

connection as per direction of Engineer -in -Charge.

CATAGORY AS FOLLOWS ,complete suitable for OFFICE.

All the switches & sockets should be warrantied for a

Group control of point in Recessed wirring to light point/

fanpoint/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLSH/LSZH PVC insulated copper conductor of ISI marked

Make- Make- Finolex/ Anchor/Polycab/HAVELLS or equievalant

reputed make A catagory ISI marked as approved as approved

20 mm dia PVC flexible non metallicconduit FRLS type ISI

marked Make-AKG/Anchor/Kinjal orequievalant reputed make

A catagory ISI marked asapproved with 6A modular type((

falme retradant type))switch ISI marked Make-

Schneider(Zencelo)/ legrand(Arteor) /Panasonic (vision) or

equievalant reputed make & model A catagory ISI marked as

77 228 approved, and ceiling roseISI marked Make-Schneider Nos 25.00 1,112.05 27,801.22

(Zencelo)/ legrand( myrius)/Panasonic (Equievalant model)

or equievalant reputedmake & model A catagory ISI marked as

approved of modular type G.I box with metallic cover plate

(both side) falme retradant type) Make-

Schneider(Zencelo)/legrand(

Arteor) /Panasonic (vision)or equievalant reputed make &

model A catagory ISI marked as approved, of suitable

size,modular box with 1.5 sq. Mm FRLS PVC insulated single

core multistandard copper conductor as earth wire including

allaccessories and connection as per direction of Engineer -in

Group control of point in existing false ceiling wirring to

lightpoint/ fan point/ exhaust fan point/ call bell point with

1.5sq.mm FRLSH/LSZH PVC insulated copper conductor of

ISImarked Make- Make-Finolex/Anchor/Polycab/HAVELLS or

equievalant reputedmake A catagory ISI marked as approved

as approved with20 mm dia steel conduit ISI mark metallic

conduit ISImarked Make-AKG/Anchor/Kinjal or equievalant

reputedmake A catagory ISI marked as approved with 6A

modulartype( falme retradant type)) switch ISI marked Make-

Schneider(Zencelo) /legrand ( Arteor) /Panasonic (vision)

orequievalant reputed make & model A catagory ISI markedas

229 approved, and ceiling rose ISI marked Make- Nos 15.00 636.10 9,541.45

Schneider(Zencelo)/ legrand ( myrius) /Panasonic

(Equievalantmodel) or equievalant reputed make & model A

catagoryISI marked as approved of modular type G.I box with

metalliccover plate (both side)( falme retradant type) Make-

Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)

orequievalant reputed make & model A catagory ISI markedas

approved, of suitable size, modular box with 1.5 sq. Mm FRLS

PVC insulated single core multistandard copperconductor as

earth wire including all accessories an

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 25 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLSH/LSZH insulated, copper

conductor, single core cable (Finolex/Anchor/Polycab/

HAVELLS/RR KEBLE) or equievalant reputed make A

catagory ISI marked as approved, in recessed PVC conduit

78 234 Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or

equievalant ISI marked as approved) as required as per

direction of Engg.-in-Charge. Ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free after sales service within warranty

period for acceptance of materials

2 nos single core 1.5 sq. mm copper wire for phase

and neutral and 01 no of single core 1.5 sq. mm copper

79 235 wire for earth continuty conductor. In 20 mm dia non Mtr 98.00 42.67 4,181.44

metallic heavy duty flexible conduit (LDB to LSB/LIGHT

2 nos single core 2.5 sq. mm copper wire for phase

and neutral and 01 no of single core 1.5 sq. mm copper

wire for earth continuty conductor in 20 mm dia non

metallic heavy duty flexible conduit. (BDB to

LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR)

4 nos single core 2.5 sq. mm copper wire for phase

and neutral and 02 nos of single core 2.5 sq. mm copper wire

81 237 for earth continuty conductor .in 25 mm dia non metallic Mtr 266.22 86.68 23,075.34

heavy duty flexible conduit(LDB to LSB/5A SOCKET)

2 nos single core 4 sq. mm copper wire for phase

and neutral and 01 no of single core 1.5 sq. mm copper

wire for earth continuty conductor in 20 mm dia non

82 238 metallic heavy duty flexible conduit .(PDB to PSB/ Mtr 111.98 53.08 5,944.20

GAYSER POINT/AC POINT/ROOM LIGHT CONTROL

TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD)

4 nos single core 4 sq. mm copper wire for phase

and neutral and 02 nos of single core 2.5 sq. mm copper wire

for earth continuty conductor in 32 mm dia non metallic

83 239 heavy duty flexible conduit.(PDB to PSB/GAYSER. Mtr 67.39 80.97 5,456.02

POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL

2 nos single core 6 sq. mm copper wire for phase

and neutral and 01 no of single core 2.5 sq. mm copper

84 240 wire for earth continuty conductor in 25 mm dia non Mtr 30.80 63.50 1,955.73

metallic heavy duty flexible conduit .(LFDB TO LBDB)

4 nos single core 6 sq. mm copper wire for phase

and neutral and 02 nos of single core 2.5 sq. mm copper wire

85 241 for earth continuty conductor in 32 mm dia non metallic Mtr 32.50 96.42 3,133.73

heavy duty flexible conduit.(LFDB TO LBDB/power

unit/point) (4X6+2X2.5)

4 nos single core 10 sq. mm copper wire for phase

and neutral and 02 nos of single core 4 sq. mm copper

86 242 wire for earth continuty conductorin 32 mm dia non metallic Mtr 133.00 463.63 61,663.27

heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN

BDB light) (4X10+2X4)

4 nos single core 16 sq. mm copper wire for phase and

neutral and 02 nos of single core 10 sq. mm copper wire for

87 243 earth continuty conductor in 40 mm dia non metallic heavy Mtr 15.00 696.57 10,448.56

duty flexible conduit.(FLOOR PANEL TO TPN BDB power)

Supplying and fixing 20 amps, 240 volts, SPN, industrial type

socket outlet, with 2 pole and earth metal enclosed plug top

along with 32 amps. C-series, SP MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover

for the socket outlet, and complete with connections, testing

and commissioning etc. as required as per direction of Engg.-in

88 244 Charge.. . Make-Legrand/Schneider/Siemens/panasonic or Nos 20.00 203.60 4,071.91

equievalant reputed make & model A catagory ISI marked as

approved,All the Components should be warrantied for a

replacement period of 5 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 26 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supplying and fixing 32 amps, 415 volts, TPN, industrial type

socket outlet, with 4 pole and earth metal enclosed plug top

along with 32 amps. C-series, TP MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover

for the socket outlet, and complete with connections, testing

and commissioning etc. as required as per direction of Engg.-in

Charge.. . Equievalant higher model of Make-

Legrand/Schneider/Siemens/panasonic equievalant

reputed make & model A catagory ISI marked as

approved.All the Components should be warrantied for a

replacement period of 5 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supplying and fixing following size/ modules, GI box along with

modular base & metallic cover plate (both side) plate for

modular switches in recess etc as required as per direction of

Engg.-in-Charge. MAKE- Legrand/Siemens/Anchor/

Panasonic/ Schneider or equievalant reputed make &

model A catagory ISI marked as approved. All the

Components should be warrantied for a replacement

period of 5 years against defects with ncessary test

report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free

aftersales service within warranty period for acceptance

Supplying and fixing of following sizes of medium class

PVC FRLS conduit ISI marked along with

accessories in surface/recess including cutting the wall and

94 250 making good the same in case of recessed conduit as required

as per direction of Engg.-in-Charge .MAKE KINJAL/

AKG/Anchor or equievalant reputed make A

catagory ISI marked as approved

Supplying and installation of AC starter Modular type,

Equievalant higher model

of Schneider/Hager/Siemens/Anchor/Panasonic

make or equievalant reputed make & model A catagory ISI

marked as approved coil voltage-415 Volt A.C. & O/L

range of 9-14A range on mod Box of suitable size including

modular coveras required as per direction of Engg.-

in-Charge .All the Components should be warrantied for a

replacement period of 5 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supply and fixing CALL bell (Ding dong type) /Buzzer on the

existing switch box/cover. Equievalant higher model

of Schneider/Hager/Siemens/Anchor/Panasonic

make or equievalant reputed make & model A catagory

ISI marked as approved .as required as per

98 255 direction of Engg.-in- Charge.All the Components should Nos 14.00 68.20 954.82

be warrantied for a replacement period of 5 years against

defects with ncessary test report & Warrnaty certificate to

be submitted to the department for genuinity of product

& to avail free aftersales service within warranty period for

acceptance of materials.

99 258 Sub-Head II(Light fitting Fixture & Fan)

Supplying, installation, of exhaust fan of heavy duty 300

mm sweep (Make-Equievalant higher model with 5

star rated Havells/almonard/Anchor/ Panasonic/ Usha/

Halonix or equievalant reputed make & model A

catagory ISI marked as approved ) of exhaust fan in

the existing wall, including fixing & conntection as

required as per direction of Engg.-in- Charge. Replacement

Warranty will be 5 years.

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 27 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supplying, installation, of exhaust fan of heavy duty 380

mm sweep 1400 rpm with louvers Make-Equievalant

higher model with 5star rated of

Havells/almonard/Anchor/Panasonic/Usha/Halonix or

equievalant reputed make & model A catagory ISI marked as

approved ) of exhaust fan in the existing wall, including

fixing & conntection .as required as per direction of Engg.-in-

Charge. Replacement Warranty will be 5 years.

Supplying, installation, testing and commssioning of 1400 mm

sweep white/milky colour ceiling fan Make-Equievalant

higher model with 5 star rated of

Havells/almonard/Anchor/Panasonic/Usha/Halonix or

equievalant reputed make & model A catagory ISI

marked as approved ) including wiring the down rod of

standard length (upto 30 cm) with 1.5 sq mm PVC insulated,

copper conductor, single core cable etc. as required.(With fan

Regulator) as required as per direction of Engg.-in-

Charge.Replacement Warranty will be 5 years.

Supplying, installation, testing and commssioning of 1200 mm

sweep white/milky colour ceiling fan Make-Equievalant higher

model with 5 star rated of Havells/almonard/ Anchor/

Panasonic/Usha/Halonix or equievalant reputed make &

model A catagory ISI marked as approved ) including

wiring the down rod of standard length (upto 30 cm)

with 1.5 sq mm PVC insulated, copper conductor, single

core cable etc. as required as per direction of Engg.-in-

Charge,Replacement Warranty will be 5 years.(With fan

Supplying and fixing of Energy efficient Recess mounted

LED luminaire(IP-20) inverter made up of CRCA

powder coated sheet steel housing of 595 X 595 mm x 70

mm size with of not more than 36W and system lumens

output not less than 3250 lumens (120 lm/ wt) with diffusers

for better light transmission and pure effect with High

luminous flux LEDs for better light output, CRI not less

than 80, CCT of 5700-6500 degree K, THD less than

10%,internal surge protection of 3 KV, complete with Non

104 263 integrated isolated electronic driver (protects the output No 28.00 4,786.40 1,34,019.24

/secondary side from any disturbance on the input / primary

side ensuring safe operation)and all other accessories

suitable for operation on140- 270 V, 50 Hz ,L70 @50,000

burning hrs (5 years warranty)supply .as required as

per direction of Engg.-in-Charge (Make: HALONIX

HLFPR22-05-36-CW-R-INV or similar model of

LT/Trilux /Philips/Panasonic /or equievalant reputed make

& model A catagory ISI marked as approved.) . The

luminaire must be Replacement Warranty will be 5 years.

Supplying and fixing of Energy efficient surface

mounted square shape 18 W LED luminaire of dimension of

225x 225 x 35 mm consists of white powder coated , die-cast

Alluminium housing with high quality frosted diffuser for glare-

free uniform lighting distribution with wattage not more

than 20 watt and lumen output of 1500 lumens, , CRI not

less than 80,CCT of 6000 degree K,THD less than 10%,

105 264 with electronic driver, internal surge protection of 2.5 KV , Nos 110.00 661.52 72,766.96

L70 B50: 30000 hrs (2 yrs warranty) and all other accessories

suitable for operation on 220 V to 240 V supply as required

as per direction of Engg.-in- Charge. ( Make : (Make: wipro

LD80-171-60-XX-SM or similar model of LT/Trilux

/Philips/Panasonic/HALONIX or equievalant reputed make &

model A catagory ISI marked as approved).The luminaire

should be Replacement Warranty will be 5 years

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 28 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supplying and fixing of Energy efficient recess mounted

LED luminaire with white powder coated ,pressure die-cast Al

housing ,with high transmititivity,non-yellowing PMMA diffuser,

with wattage not more than 18 watt and lumen output not

less than 2600 Lumen ( 120 lumens/watt ) of size 595

x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500

degree K,THD less than 10%, with Non integrated isolated

driver (protects the output /secondary side from any

106 265 disturbance on the input / primary side ensuring safe Nos 71.00 609.78 43,294.31

operation), all other accessories , life : 50,000 burning

hours (5 years warranty) , Internal surge protection of 3 KV

suitable for operation on 230 V, 50 Hz supply as required

as per direction of Engg.-in-Charge. (Make: wipro LDB1-171-

XXX-60-SM or similar model of LT/Trilux

/Philips/Panasonic/HALONIX or equievalant reputed make &

model A catagory ISI marked as approved.) The

luminaire should be Replacement Warranty will be 5 years.

SITC of energy efficient LED tube light fittings with decorative

alluminium batten and LED tube light having power rating not

more than 20 watt and lumen output not less than 2200 lumen

complete with electronic driver and all other accessories

with diffuser having 5 years warranty i/c connection etc as

107 266 required as per direction of Engg.-in-Charge. ( (Make: wipro Nos 60.00 265.75 15,944.97

LL20-221 -- or similar model of LT/Trilux

/Philips/Panasonic/HALONIX or equievalantreputed make &

model A catagory ISI marked as approved.). The

luminaire should be Replacement Warranty will be 5 years

SITC of Sleek LED 10 watt mirror light fitting with

extruded polycarbonate housing,High optically efficient

diffuser,above wash basin complete with all accessoriesetc.

directly on wall, including connection with 1.5 sq. mm

FRLS PVC insulated, copper conductor, single core cable

and earthing etc. as required as per direction of Engg.-in-

( Make : WIPRO Model No:LL20-111-XXX-60-NE or

similar model of PHILIPS/Panasonic/HALONIX or

equievalant reputed make & model A catagory ISI

marked as approved.

)The luminaire should be Replacement Warranty will be 5

SITC of IP 20 Non-integral flexible LED strip light,High optically

efficient diffuser,, 3000K with 12 w/mtr @ 5Mtr pool with

Driver extra as required as per direction of Engg.-in-Charge (

Make : (Make: wipro LS06-005-120---or similar model of

LT/Trilux /Philips/Panasonic or equievalant or similar

model of /PHILIPS/Wipro/HALONIX or equievalant reputed

make & model A catagory ISI marked as approved. )The

luminaire should be Replacement Warranty will be 5 years

Supplying and fixing of small focus light for small monuments

as 6W , 4000 K required as per direction of Engg.-in-Charge

(Make: wiproLD98-900----or similar model of

LT/Trilux /Philips/Panasonic/HALONIX or equievalant reputed

make & model A catagory ISI marked as approved.)The

luminaire should be Replacement Warranty will be 5 years

Supplying and fixing of step light for gallery STEP as

3W , 2000 K required as per direction of Engg.-in-Charge

(Make: wipro LT51 -370-XXX-30-XX or similar model of

LT/Trilux /Philips/Panasonic or equievalant reputed make &

model A catagory ISI marked as approved.)The luminaire

should be Replacement Warranty will be 5 years

SITC of energy efficient occupancy sensor having power rating

not more than 10 watt and all other accessories connection

etc as required as per direction of Engg.-in-Charge. ( similar

112 272 model of WIPRO CRP MODEL or similar model of / Nos 3.00 1,171.18 3,513.54

/PHILIPS/Panasonic or equievalant reputed make & model A

catagory ISI marked as approved. The luminaire should be

Replacement Warranty will be 5 years

113 273 BDBS,DB,AC DB,FLOOR PANELS,MCBS

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 29 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supplying and fixing of following mentioned way,

three pole/single pole and neutral, sheet steel,double door

MCB distribution board, 415 volts/240 volts shall be as

per IEC 61439-3,integrated door earthing system offering

additional safety to the user,High quality polyurethane

Gasket,the box and cover shall be fabricated to withstand

IK09,the DB should be properly pre-treated with 7 tank

process and duly powder coated, phosphatized with

powder coated finish, on surface/recess, complete with

terminal blocks,with suitable size FR PVC insulated copper

conducter up to terminal blocks, tinned copper busbar,

neutral busbar, earth bar, din bar. Make- LEGRAND-Ekinox3

DB/ Siemens-Betaguard/ Schneider- Acti

9/Panasonic(Equivalant model) /ABB(Equivalant model)

or equievalant reputed make & model A catagory ISI

marked as approved. as per direction of Engg.-in-Charge. The

Distribution boards should be Replacement Warranty will be 5

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC

61439-3 suitable for Flush mounting and Surface mounting

with 100A Copper Bus Bar for each phase, with neutral Bus

115 275 bar, Earth Bar & Cable ties for cable management, prefitted Nos 11.00 2,415.60 26,571.58

masking sheet, IP43-IK09 with metal door(FOR

LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on

Supply and fixing of 12 way DD single pole and neutral sheet

steel MCB distribution board 250V on surface/recess complete

with tinned copper bus bar, neutral bus bar, earth bar, din bar,

detachable gland plate, interconnections, phosphatized and

powder painted including earthing etc. as required (but with

out MCB/ RCCB/ Isolator) (ALL LIGHT

WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS

LOAD, EM LOAD LIGHT LOAD,POWER LOAD )

2+4 way MCB Enclosure DB (GLAZED door) (only each EM.

CONNECTION UPS LOAD)

Supplying and fixing 6 amps to 32 amps rating, 240

volts, C series, single poles MCB of Make-LEGRAND-

Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T

(Equievalant model)/Panasonic(Equivalant model)

/ABB(Equivalant model) or equievalant reputed make & model

A catagory ISI marked as approved. the existing MCB DB

complete with connections as per direction of Engg.-in-

Charge. The MCB should be Replacement Warranty will be 5

years.MCB should have the fault indication system in different

colour for ON, OFF & TRIP condition or Mid trip position

for Trip conditions for easier identification of fault.Warranty

on MCB is 5 years.

Supplying and fixing 25Amps DP 240 volts, RCCB,300mA

Make-Equievalant higher model

of Legrand/Snheider/Siemens /L&T/ Panasonic /ABB or

equievalant reputed make & model A catagory ISI marked as

approved in the existing MCB DB in the existing MCB DB

complete with connections as per direction of Engg.-in-

Charge. The RCCB should be Replacement Warranty will be 5

Supplying and fixing 40Amps DP 240 volts, RCCB,300mA

Make-Equievalant higher model of Legrand/Snheider/Siemens

/ L&T/Panasonic /ABB or equievalant reputed make &

120 280 model A catagory ISI marked as approved in the existing Nos 1.00 2,151.30 2,151.30

MCB DB in the existing MCB DB complete with

connections as per direction of Engg.-in- Charge. The

RCCB should be Replacement Warranty will be 5 years

Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA

Make-Equievalant higher model of Legrand/Snheider/Siemens

/L&T/Panasonic /ABB or equievalant reputed make &

model A catagory ISI marked as approved in the existing

MCB DB in the existing MCB DB complete with

connections as per direction of Engg.-in- Charge.(for

power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should

be Replacement Warranty will be 5 years

122 282 (Earthing) INSTALLATION

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 30 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

S/IT/C Of Earthing with copper earth plate 600 mm x 600mm

x6 mm thick ISI marked including accessories and

providing masonary with cover plate having loccking

123 283 arrangement and watering pipe etc (WITH charcoal and Nos 4.00 6,272.49 25,089.97

salt) as required as per direction of Engg.-in-Charge. The

entire earthing system should be Replacement Warranty will

S/IT/C of materials and installation of pipe earth electrode

made out of 50mm dia class B G.I. pipe of 3.0 metre long with

arrangements for fitting/ termination of G.I. flat / wire with

G. I. nut bolts & washers including cost of burnt wood

charcoal, salt, foreign soil, water pouring arrangements, brick

masonary enclosure on top with removable RCC cover

complete with labour for excavation of pit in all kinds of soil &

rock as required and as per direction of Engineer-in-

charge.The entire earthing system should be Replacement

Warranty will be 5 years

Providing and fixing 4 mm dia copper wire on surface or

125 285 in recess for loop earthing as required.as per direction of Engg.- Mtr 242.00 104.15 25,204.20

Providing and fixing 25mm x 5 mm copper strip on surface or

126 286 in recess for connections etc. as required as per Mtr 200.00 576.74 1,15,348.46

direction of Engg.-in-Charge.

Providing and fixing 50mm x 5 mm copper strip on surface or

127 287 in recess for connections etc. as required as per Mtr 30.00 1,072.85 32,185.58

direction of Engg.-in-Charge.

Supplying and making brick massonary pedastal with

128 288 extra super structure including cement plastering etc as Mtr 2.00 2,799.72 5,599.44

required as per direction of Engg.-in-Charge.

129 289 CABLING AND END TERMINATION MAIN AREA

Supplying of one number PVC insulated armoured and

PVC sheathed XLPE property AL. conductor power cable

of 1.1 KV grad POLYCAB/HAVELLS/Finolex or equievalant

reputed make ISI marked as approved of following size

cables as per direction of Engg.-in-Charge. Ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free after sales

service within warranty period for acceptance of materials

131 291 3.5core x 185 sq mm (MAIN PANEL,2 runs) Mtr 244.00 984.00 2,40,096.39

Supplying of one number PVC insulated armoured and

PVC sheathed XLPE property AL. conductor power cable

of 1.1 KV grad POLYCAB/HAVELLS/Finolex or equievalant

reputed make ISI marked as approved of following size

cables as per direction of Engg.-in-Charge. Ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free after sales

service within warranty period for acceptance of materials

134 294 4core x 16 sq mm (MDB TO FDBL/FDBU SUB,BDB) Mtr 30.00 163.06 4,891.91

135 295 4 core x 4 sq mm (for small power/LIGHT TO POLE) Mtr 33.00 98.40 3,247.21

136 296 3.5core x 35 sq mm (To power BDB/UPS PANEL) Mtr 30.00 244.60 7,337.87

137 297 LAYING OF CABLE

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size not exceeding 25 SQ. MM direct in

138 298 ground in the trench in one horizental formation including Mtr 10 139.99 1,399.86

excavation ,sand coushing protection covering and refilling the

trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of1.1 kv grade size exceeding 25 SQ. MM but not

exceeding 120 SQ. MM direct in ground in the trench in

one horizental formation including excavation ,sand

coushing protection covering and refilling the trench etc as

required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size exceeding 120 SQ. MM but not

exceeding 400 SQ. MM direct in ground in the trench in

one horizental formation including excavation ,sand

coushing protection covering and refilling the trench etc as

required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size exceeding 25 SQ. MM but not

exceeding 400 SQ. MM direct in ground in the EXISTING

PIPE etc as required as per direction of Engg.-in -charge.

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 31 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Laying of PVC Insulated PVC Seated /XLPE power cable

142 303 of 1.1 kv grade size not exceeding 25 SQ. MM in open duct Mtr 10 35.84 358.36

etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size exceeding 25 SQ. MM in open

duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as

required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size not exceeding 25 SQ. MM in surface

with shaddle and screw etc as required as per direction of

Engg.-in charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size not exceeding 120 SQ. MM From

25 SQ. MM in surface with shaddle and screw etc as required

as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ.

MM in surface with shaddle and screw etc as required as per

direction of Engg.-in -charge.

Supplying and making end termination with brass compression

147 308 gland and aluminium lugs for following mentioned size cable.as

per direction of Engg.-in-Charge.

Providing,fixing and laying of fallowing dia G.I. pipe

(medium class) in ground complete with G.I fitting incl.

trenching(75 mm depth)and refilling as per direction of Engg.-

Providing,fixing and laying of fallowing dia HDPE pipe (medium

155 316 class) in ground complete with fitting incl. trenching(75

mm depth)and refilling as per direction of Engg.-in-Charge.

157 318 MAIN PANEL

S/I/T&Commissioning of LT indoor floor mounted cubical type

electrical main panel (for both light and power circuit) made

out by 2mm CRCA steel sheet duly derusted & pented by

simens gray powder cote paint is designed as G.A drawing as

per direction of Engg.-in-Charge. Warrentee period of

replacement of panel & accessories must be 5 years &

compelete test certificate must be submitted along with panel

board including component list.

In commer- 01 number of 320(200-300) Amps 4P MCCB with

Rom & sprader link,36kA.(make

159 320 ABB/Siemens/SCHNEIDER/L&T/Legrand,ISI

marked)(Icu=100%Ics)with shunt trip.with axulary for

In commer DG- 01 number of 125(100-125) Amps 4P MCCB

with Rom & sprader link,25kA. (make-

160 321 ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI

marked)(Icu=100%Ics)with shunt trip.with axulary for

Busbar- 04 numbers of 300Amps Electrolytic copper

duly sleeved by color coaded PVC sleeve & supported by

suitable size DMC insulator.

Busbar DG - 04 numbers of 200Amps Electrolytic

162 323 copper busbar duly sleeved by color coaded PVC sleeve &

supported by suitable size DMC insulator.

Out going- (i) 63A 4P MCB10 NOS FOR POWER BDB

(Legrand/Schneider make)

Out going- (ii) 08 nos 32A 4P MCB LIGHT BDB AC IDU

BDB/LIGHT BDB,LIFT,WATER(Legrand/Schneider make)

Out going- (iii) 02 nos 100A 4P MCCB,with ROM

& s,link,25kA.FIRE & SPARE(Legrand/Schneider make)

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 32 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Instrument- (i) 06 numbers phase indicating lamp with toggle

switch & HRC fuse.

(ii) 01 set of digital type multifunction meter with CT for

voltage,current,frequency,PF,THD indication

168 329 (iii) 04 nos of 65kA SP VSD WITH 32A SP MCB

169 330 EMERGENCY UPS FDB,COMPUTER ROOM

In commer- 01 no 32A 4P MCB 10kA,C series with on/off trip

indication UPS Light load for each floor. ( Make-

LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider-

Acti 9/L&T (Equievalant model)/Panasonic(Equivalant

model) /ABB(Equivalant model)or equievalant make with

proper model ISI marked)

Busbar- 04 numbers of 63Amps,50kA Electrolytic copper

172 333 busbar duly sleeved by color coded PVC sleeve & supported by

suitable size DMC insulator.

Out going- 06 nos 25A 2P MCB 10kA,C series UPS

Light load for each area UBDB. ( Make-LEGRAND-Ekinox3

DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T

(Equievalant model)/Panasonic(Equivalant model)

/ABB(Equivalant model)or equievalant make with proper model

Instrument- (i) 03 numbers phase indicating lamp with toggle

switch & HRC fuse.

(ii) 01 set of 0-60Amps Ammeter

175 336 with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make

(iii) 01 set of 0-500 voltmeter .(DIGITAL)(Sicure/L&T

or equievalant make & model)

177 338 UPS SYSTEM

179 340 CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON

STEEL WIRE MESH CABLE TRAYS with internal

dimensions of size 54mm(H) x 200mm(W), of Legrand -

Cablofil make or equievalant reputed make & model A

catogory, ISI marked as approved .The Load bearing capacity

180 341 of the Cable Trays should be minimum of 104.8Kg/meter at mtrs 10.00 666.33 6,663.33

the span of 1.5Meter as per UL specifications.(With all

accessories,bend,cover,supporter)WITH REQUIRED SIZED

JUNCTION BOX ,COVER CONNECTOR as required as per

direction of Engg.-in-Charge. Warrentee period oftray must be

5 years & compelete test certificate must be submitted .

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 ,

CARBON STEEL WIRE MESH CABLE TRAYS with internal

dimensions of size 54mm(H) x 300mm(W), of Legrand

- Cablofil make or equievalant reputed make &

model A catogory, ISI marked as approved .The Load

bearing capacity of the Cable Trays should be minimum of

104.8Kg/meter at the span of 1.5Meter as per UL

specifications.(With all

accessories,bend,cover,supporter)WITH REQUIRED SIZED

JUNCTION BOX ,COVER CONNECTOR as required as per

direction of Engg.-in-Charge. Warrentee period oftray must be

5 years & compelete test certificate must be submitted .

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 ,

CARBON STEEL WIRE MESH CABLE TRAYS with internal

dimensions of size 54mm(H) x 400mm(W), of Legrand

- Cablofil make or equievalant reputed make &

model A catogory, ISI marked as approved .The Load

bearing capacity of the Cable Trays should be minimum of

104.8Kg/meter at the span of 1.5Meter as per UL

specifications.(With all

accessories,bend,cover,supporter)WITH REQUIRED SIZED

JUNCTION BOX ,COVER CONNECTOR as required as per

direction of Engg.-in-Charge. Warrentee period oftray must be

5 years & compelete test certificate must be submitted .

INSTALLATION OF 1X50 KVA DG ONLY FOR EMERGENCY

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 33 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supply, Transportation, erection, testing and commissioning of

3 Phase, 415V, 50Hz, water cooled multi cylinder diesel

generator set with alternator of 50KVA ( Make -Kirloskar /

Jakson / sterling) out put contineous rating directly coupled

Engine and Alternator with guard and mounted on a common

base plate of Robust construction and complete with AMF panel

having IP-52 protection, Acoustic Enclosure as per CPCB

norms , sound absorbing material, to restrict sound level up to

184 345 75 dB up to 1 mtr distance and as per CPCB norms etc as per

following specifications mentioned below.

A. Alternator make : Kirloskar / Stamford / Crompton Greaves

/ Leroy Somer /Caterpillar or equievalant reputed make &

model ISI marked as approved as per direction of Engg.-in-

Charge. Warrentee period of panel must be 5 years &

compelete test certificate must be submitted along with

DG set including component list & smoke exhaust system

drawing,certified ISO 8528

ALTERNATOR:The alternator of the output rating shall be

3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The

185 346 alternator is self excited, self regulated, and shall confirm to

IS: 13364 of 1992 with regulation of +5% from no load to full

load. degree of protections shall be IP21.

ENGINE: Diesel Engine make : Kirloskar / Cummins

/ Caterpillar / Perkins /Volvo penta /Ashok Leyland / Mahindra

& Mahindra / Greaves Cotton /Tata or equievalant make &

model ISI marked as approved . Diesel Engine start,

developing suitable BHP output at 1500 RPM with mechanical

/ electronic governing so as to enable the alternator to

give 50KVA continuous output at 0.8 P.F. lagging at NTP

187 348 conditions. The diesel engine shall be capable of providing

10% O/L for 1 Hr for every 11 Hrs of continuous running at

full load. The engine with 1st filling of oil and Diesel etc.

01. Exhaust pipe of required size and length with insulation or

clading. 02. Diesel tank suitable for 8 to 10 Hours running

capacity. 03. Residential Silencer.

04. SMF Batteries with leads as per the

Manufacturer standards

AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord

with all Power & Control Contractors, Switches, Meters

and other accessories, Internal Wiring, connection,

inter- connection etc. for Trouble Free smooth function for

50KVA DG Set complete with Battery Charger & leads as

BASE PLATE: Common Base Plate of required size

for mounting of Engine Alternator Set fabricated from

MS Channerl and vibration damping arrangement with

cushy foor mounting including paintng etc. as required.

FOUNDATION: Suitable size Cement Concrete

(1:2:4) foundation duly plastered and finished with neat coat

Cement as required along with smoke exhaust system piping

including base frame of structure & lightening protection

193 354 system. *It also includes 2 nos GI pipe earthing for body set 1 492627.532 492627.532

and 2 nos copper plate earthing for neutral, control cable

of 15mtr 2.5sqmm 6core , civil foundation work. (The

Manufacturing of DG set shall not in any case be more

than six months old from the date of award of work)

196 355 6 PASSENGER LIFT WITH WIRRING(1.1)

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 34 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Design Supply, Installation, Testing & Commissioning and

putting into operation with compelete inspection by

concerned electrical inspector, Director Factory and

Boilers, Odisha with proper testing certificate and final

testing of Automatic Lift complete with all standard

equipments accessories and control equipments as per

Manufacturer's Design with lift control panel including BMS

facility and as per BIS and fulfilling following

requirements.It includes supply,laying of power cable and

197 356 fixing of glands,lugs etc.( Machine room less, Gearless

Type).Design and as per CPWD /OPWD specification (Part III

Lifts) 1981 with valid lisence for installation and

fulfilling following requirements on turnkey basis as per

direction of Engg.-in-Charge. LIFT OF machineroom less

type(Make-Kone/Junction/OTIS/Schindler/Thysenkrup or

equievalant reputed make & model A catogory, ISI marked as

approved )Warrentee period of accessories & system must

be 5 years & compelete test certificate must be

submitted along with Lift including component list .

198 357 Type: PASSENGER LIFT

199 358 Load: 6 PASSENGER(544KG)

200 359 Speed: 1.0 Meter Per Second.

201 360 Control: Variable voltage with variable frequency

Operation: Microsprocessor based simplex collective selective

with / without Lift Attendant.

203 362 Total Rise: About 12 Meters.

204 363 Landings: For All on same side.

205 364 Floors Served: GF,1F,2F,3F,4F

Signals: Digital Car Position Indicator, Car Travel direction

Indicator in Car & at all Landings.

Lift Shaft Size: About as 6 passenger lift standard,

finished with Plaster.

208 367 Lift Car Size: About lift standard.

Car Entrance: Clear Opening lift standard high Protected with

Landing Entrance: Clear Opening lift standard high Protected

with Landing Door.

Car Door: Stainless with front glass to transparent Two Panel

Center opening flush type.outer visible.

Landing Door: Mild Steel Two Panel Center opening flush type

Door Operation: Automatic Electric Power operated Door with

in infrared protection.

Car Interior: Stainless Steel Panel with Hair line finish on

215 374 Car Floor: Hard Wood covered with PVC / Marblex Tiles.

Car Ceiling & Lighting: Fluorescent Lighting Concealed by

suspended false ceiling with plain acrylic diffiuser. The

216 375 frame of suspended false ceiling shall be of powder

217 376 Car Ventilation: Pressure Fan with anodized Aluminum Grill.

Emergencing Lighting in Car: Battery operated

Emergencing Lighting in the Lift Car.

Intercom System: Battery operated intercom system in Lift Car

and Control Room.

Emergencing Alarm: Battery operated Alarm Bell System in Lift

Car and Control Room.

221 380 Position of Machine Room: Directly above the Lift Shaft.

Electric Power Supply: AC 415 Volt 3 Phase 50 Hz terminated

in control room along with control panel with facility of

222 381 BMS connectivity system .The scope of lift control panel is

with lift vender scope.

223 382 OTHER SPECIAL PROVISIONS

224 383 • VVVF CONTROLLER

225 384 • AUTOMATICE RESCUE DEVICE (ARD)

226 385 • EMERGENCY LIGHT AND BATARY OPERATED ALARAM BELL

• DOT MATRICKX SEVEN SIGMENT DIGITAL POSITION

228 387 • FIRE RATED DOOR FOR 1 HOUR

• 3 WAY INTER COM/PRESS AND SPEAK BUTTON WITH

230 389 • FLOOR ANNUNCIATOR WITH MUSIC

231 390 • INFRA RED SCREEN

232 391 • OVER LOAD WARNING INDICATOR

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 35 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

233 392 • BRAILLE BUTTONS

234 393 • FREE SERVICE FOR 5 YEARS

235 394 • PIT LADER

236 395 • FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME

237 396 • PROVISION FOR CC CEMARA WITH INSTRUEMENT

238 397 Fire Man Switch: Fire Man Switch at Main Landing Terminal. JOB 1 7,54,031.40 7,54,031.40

240 398 ELV SYSTEM (EPABX, LAN, CCTV & INVERTER SYSTEM)

Supply,installation, testing and commissioning of 4 P&T & 14

Extensions Hybrid EPABX System

Supply & Laying of 2 Core 0.5mm telephone cable using Rigid

PVC Pipe in concealed manner per running metre of cable laid.

Supply,installation, testing and commissioning of Electronic

Push Button Telephone with Caller ID

Supply,installation, testing and commissioning of GSM FCT

Supply,installation, testing and commissioning of Lightening

Protector for P&T Lines

Supply,installation, testing and commissioning of 12v 7 Ah

Battery including termination

247 406 LAN SYSTEM

Supply,installation, testing and commissioning of 16 Port

Gigabit Ethernet Switch.

Supply,installation, testing and commissioning of RJ45 Modular

Complete in concealed manner including termination of cable

Supply & Laying of Cat 6 cable using Rigid PVC Pipe in

concealed manner per running metre of cable laid.

Supply,installation, testing and commissioning of Patch Panel,

251 410 9U Rack, Cable Manager, Cooling Fan x 2 Nos., Earthing Kit, Set 2.00 10,078.99 20,157.98

Supply,installation, testing and commissionining of 1 Mtr Patch

Supply,installation, testing and commissionining of 3 Mtr Patch

254 413 CCTV SYSTEM

Supply,installation, testing and commissioning of 8 Channel

DVR with 2 Sata Ports

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 36 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supply,installation, testing and commissioning of 4 MP Dome /

Bullet Camera with 25 Mtrs IR Range

Supply & Laying of RG59+ 3 Core cable using Rigid PVC Pipe in

concealed manner per running metre of cable laid.

Supply,installation, testing and commissioning of BNC & DC

Supply,installation, testing and commissionining of 4 TB CCTV

Surveillance Hard Disk

Supply,installation, testing and commissionining of 10 Amps

Supply,installation, testing and commissioning of 32" LED

Supply,installation, testing and commissioning of 10 Mtrs HDMI

Supply,installation, testing and commissioning of Wireless

265 424 SINE WAVE INVERTOR & SERVO

270 429 EXTERNAL ELECTRICAL WITH ILLUMINATION

Supply ,Installation testing commissioning of 45W,

High efficient LED with aluminium housing in Pure

Polyster UV resistant powder coated black finish and Top

maintainable product with top opening die cast cover with

acrylic clear glass reflector.CRI>70, IP66, Ambient temp-0

to 45DegC, Driver efficiency>85%, CCT-

4000/5700K,THD<10%,Powerfactor>0.95, Surge protection-

4 kV, Multistage Isolated Constant Current-Constant

Voltage operated driver with range 150-300V AC and Safety

Extra Low Voltage Safe level<60V DC as per IEC

standard. Luminaire lumen ≥ 4275 lumens (95 lm/W). Similar

to Wipro Make LP07- 501-XXX-57-CL or equivalent Philips/

LT/Trilux make. & model A catogory, ISI marked as approved,

with proper model make having warrantied for a period of 5

years . The luminaire to be installed in 6 mtr long GI hot

dip galvanized smart pole with anti corroson,,uv rays

stabilized,metal post with covered by resin of

Fumatech/Valmount/Transrail/RR/UTKASH /Utkal Galvanizer

make equievalant make with proper model complete

with SA bracket internal JB with 4 way connector and MCB as

per the pole drawing and direction of EIC against which

inspection mat take place. It should be installed after

making proper size RCC foundation by considering

Supplying, Erection, Fixing, connection & testing of 45

LED GATE Light of WIPRO make or

equvalant of Philips/LT/PANASONIC or equievalant

reputed make A catagory ISI marked as approved

maintenance free having 2 years warranty G.I P ipe with

braket including MCB box & including with foundation as

per the Drawing for inspection as required & as per direction

of Engg.-in-Charge.

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 37 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supplying, Erection, Fixing, connection & testing of 120 W LED

special type Flood Light of die cast alluminium

housing with frame & toughened glass ,IP 66 protection

videWipro or equvalant reputed make of

Philips/LT/WIPRO Panasonic/philips/wipro or equievalant

reputed make & model A catogory, ISI marked as approved

having 2 years warranty as approved make G.I cover box

including MCB box & including Auto On off provision

with foundation as per the Drawing for inspection as

required & as per direction of Engg.- in-Charge.

Supplying, Erection, Fixing, connection & testing of 8W, High

efficient LED with Aluminium housing with clear

toughened glass diffuser.CRI>70, IP65, CCT - 2700K, Ambient

temp-0 to 45 DegC, Driver efficiency>85%,THD<25%,

Powerfactor>0.95, Surge protection-2 kV, Multistage

274 433 Isolated Constant Current- Constant Voltage driver and Sets 4.00 7,996.00 31,984.00

Safety Extra Low Voltage Safe level<60V DC as per IEC

standard. Luminaire lumen ≥ 600 lumens (75 lm/W).

Similar to Wipro Make LF05 or equivalent Philips/ LT/Trilux

make. as per the Drawing for inspection as required & as

per direction of Engg.-in-Charge.

Supplying ,installation & fixing of 11W, High efficient LED with

extruded Aluminium housing with PC diffuser.CRI>70, IP65,

CCT - 6500K, Ambient temp-0 to 45DegC, Driver

efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-

Multistage Isolated Constant Current-Constant Voltage driver

and Safety Extra Low Voltage Safe level<60V DC as per IEC

standard. Luminaire lumen ≥ 565 lumens (51 lm/W). Similar

to Wipro Make LB12-131-XXX-65-05 or equivalent Philips/

LT/Trilux make. including with foundation as per the Drawing

for inspection as required & as per direction of Engg.-in-

Supply of materials and installation of pipe earth electrode

made out of 50mm dia class B G.I. pipe of 3.0 metre long with

arrangements for fitting/ termination of G.I. flat / wire with

G. I. nut bolts & washers including cost of burnt wood

charcoal, salt, foreign soil, water pouring arrangements, brick

masonary enclosure on top with removable RCC cover

complete with labour for excavation of pit in all kinds of soil &

rock as required and as per direction of Engineer-in-

charge.The entire earthing system should be Replacement

Warranty will be 5 years

Providing and fixing 4 mm dia copper wire on surface or

277 436 in recess for loop earthing as required as per direction of Engg.- Mtr 133.00 104.15 13,851.89

Providing and fixing 25mm x 5 mm copper strip on surface or

278 437 in recess for connections etc. as required as per Mtr 19.00 576.74 10,958.10

direction of Engg.-in-Charge.

279 438 CABLING

Supplying and laying of one number PVC insulated armoured

and PVC sheathed XLPE AL. conductor power cable of 1.1 KV

grade POLYCAB/FINOLEX/HAVELLS or equievalant reputed

ISI MARKED MAKE of following size cables as per direction of

Engg.-in-Charge.Ncessary test report & Warrnaty certificate

to be submitted to the department for genuinity of

product & to avail free after sales service within

warranty period for acceptance of materials

281 440 4core x 10 sq mm (OFP TO IND. TIMER PANEL) Mtr 121.00 149.95 18,143.35

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size not exceeding 25 SQ. MM direct in

283 442 ground in the trench in one horizental formation including Mtr 121.00 139.99 16,938.31

excavation ,sand coushing protection covering and refilling the

trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable

of 1.1 kv grade size not exceeding 120 SQ. MM From

25 SQ. MM in surface with shaddle and screw etc as required

as per direction of Engg.-in -charge.

Supplying and making end termination with brass compression

285 444 gland and aluminium lugs for following mentioned size cable.as

per direction of Engg.-in-Charge.

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 38 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

S/I/T&Commissioning of LT OUT DOOR FLOOR mounted

cubical type MCB ENCLOSURE made out by 2mm CRCA

steel sheet duly derusted & pented by simens gray

powder cote paint is designed as G.A drawing. (FOR USE) with

20A TPN MCB 01 NOLegrand/Schneider/L&T/ABB or

equievalant make & model as per direction of Engg.-in-

Charge. Ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to

avail free after sales service within warranty period 2

years of acceptance of materials

Supplying,laying of 3cx2.5 sq.mm copper flexible cable

with insulated cover of reputed make,ISI marked with all

other concerned materials as per direction of Engg.-in-

288 447 Charge. Ncessary test report & Warrnaty certificate to be mtrs 100.00 115.35 11,534.85

submitted to the department for genuinity of product & to

avail free after sales service within warranty period for

acceptance of materials

Providing,fixing and laying of fallowing dia HDPE pipe (medium

class) in ground complete with fitting incl. trenching(75

mm depth)and refilling as per direction of Engg.-in-

289 448 Charge. Ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to

avail free after sales service within warranty period for

acceptance of materials

S/I/T&Commissioning of LT OUT DOOR FLOOR mounted

cubical type timer panel with 32A 4P MCB ,40A TP

CONTACTOR ,TIMER with 15 nos 10A SP MCB C as per

direction of Engg.-in-Charge. .(Equievalant model each item of

291 450 Legrand/Schneider/L&T/ABB or equievalant make & Set 1.00 24,830.16 24,830.16

model)Ncessary test report & Warrnaty certificate to

be submitted to the department for genuinity of product & to

avail free after sales service within warranty period for 2 years

after acceptance of materials.

292 451 LIGHTENING PROTECTION (LIGHTENING CONDUCTOR)

AIR TERMINAL & ACCESSORRIES LIGHTNING

ARRESTER+ MAST: Providing and fixing of lightning conductor

finial made of 25 mm dia 300 mm long, G.I tube,having single

prong at top, with 85 mm dia 3 mm thick G.I base plate

including holes etc complete as required with as per direction

of Engg.-in- Charge.(RATE REFERING OSR 2018 SOR NO-4.2)

.The entire LA system should be Replacement Warranty will be

Reveting, sweating and soldering of copper / G.I. tape (

with another copper / G.I. tape, base of the finial or any

other metallic object) as required .as per direction of

Engg.-in- Charge. (RATE REFERING OSR 2018 SOR NO-

4.4) The entire LA system should be Replacement Warranty

will be 5 years

Providing and fixing of G.I. tape 20 mm x 3 mm thick

on parapet or surface of wall for lightning conductor complete

as required. (For horizontal run) as per direction of Engg.-

in- Charge.(RATE REFERING OSR 2018 SOR NO-4.7) The

entire LA system should be Replacement Warranty will be 5

Providing and fixing of G.I. tape 20 mm x 3 mm thick

on parapet or surface of wall for lightning conductor complete

as required. (For virtical run) as per direction of Engg.-in-

Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The

entire LA system should be Replacement Warranty will be 5

Providing and fixing of testing joint, made of 20 mm x 3

mm thick G.I. strip, 125 long with 4 nos of G.I. bolts,

check nuts and spring washer etc complete as required as per

direction of Engg.-in-Charge. (RATE REFERING OSR 2018

SOR NO- 4.12) The entire LA system should be

Replacement Warranty will be 5 years

Providing and laying of G.I. tape 32 mm x 6 mm from

earth electrode directly in ground as required as per

298 457 direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 mtrs 8.00 30.57 244.58

SOR NO- 4.14) The entire LA system should be

Replacement Warranty will be 5 years

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 39 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Maintenance free Safe Earthing Electrodes with ISI G.I.

pipe dia 75mm as Secondary electrode with wall

thickness of 2.6 mm and the Primary Earthing Electrode

will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip

filled with a highly conductive & non-corrosive compound in

between the Primary Earthing and the secondary Earthing, the

Surface Area in will be 7,06,500sqmm for 3mtrs length and

Cross Sectional Primary conducting area is 300 sq.mm.

An Solid G.I. Base plat seals the unit at the bottom. as

per direction of Engg.-in-Charge. (MES-

GFC ground Filling compound will be provided in 25 kgs

Bags.)(MES-GFC ground Filling compound will be provided in

25 kgs Bags.)(2 bags required for each

earthing electrode.)(FOR lightening protection &

Building Electrification).The entire earthing systeluding

component list .atagory ISI marked as approved, of

suitable size, modular box with 1.5 sq. Mm FRLS PVC

339 498 FIRE FIGHTING,FIRE ALARM, FIRE EXTINGUISHER

340 499 PUMPS AND APPURTENANCES

Supplying, installation, testing and commissioning of Electric

driven Main Fire Pump suitable for automatic operation and

consisting of following, complete in all respects, as required :

Horizontal type, multistage, centrifugal, split casing pump of

cast iron body & bronze impeller with stainless steel shaft,

mechanical seal conforming to IS 1520. Suitable HP Squirrel

341 500 cage induction motor, TEFC, synchronous speed 1500 RPM,

suitable for operation on 415 volts, 3 phase 50 Hz, AC supply

with IP 55 protection for nclosure, horizontal foot mounted

type with Class-'F' insulation, conforming to IS-325. M.S.

fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required. Suitable cement concrete

foundation duly plastered with anti vibration pads.

Supplying, installation, testing and commissioning of

electric driven pressurisation pump suitable for automatic

operation and consisting of following, complete in all

respects, as required :(Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body

and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS : 1520.

343 502 Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55

class of protection for enclosure, horizontal foot mounted type

with Class-'F' insulation, conforming to IS : 325. M.S.fabricated

Common base plate, coupling, coupling guard, foundation bolts

etc. as required.

Suitable cement concrete foundation duly plastered and

with anti vibration pads.

Supply,Installation,Testing & Commissioning of dust

and vermin proof front operated compartmentalised cubicle

type control panel suitable for operation on 415 Volt, 3

ph, 50 c/s power supply with 125 Amp TPN Aluminium busbar

fabricated out of 2 mm thick CRCA sheet duly powder

coated after treatment in 7 tank process with top entry

cable gland plate including interconnections, earth bus as

required comprising of : INCOMING: One(1)- 100 Amp(63-

100) 25 KA TPN MCCB with microprocessor release, O/L, S/C

345 504 and E/f release, Voltmeter with s/s, Ammeter with S/s, 3

Nos 630/5 metering CTs of Class 1.0, ON/ OFF indicating

lamps, 3 Nos Phase indicating lamp and 4P 6A MCB

OUTGOING: a)Two(2)-63 Amp MCCB, with star delta

starter suitable for motor with O/L release, ON/ OFF push

button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs

250/5, Ammeter S/S. B) 1 Set – Relay, Auto/ Manual

Selector Switch, Battery Charger, Annunciation Panel,

Control wiring of pressure switches, flow switches and

starters etc as required for auto

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 40 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supply & Laying of XLPE power cable of 1.1 KV grade

of following size on Cable

350 509 Cable tray

Supplying instalaltion hot dip galvanized ladder type cable tray

of following size including installation along wall/ suspended

from ceiling with brackets/ threaded suspenders including

bends etc as required.

352 511 150 mm (W) X 50 mm (H) with 1.2 mm thick sheet Mtr 30.00 318.16 9,544.81

354 513 Cable laying

Laying & fixing of one no. PVC insulated and PVC

355 514 sheathed/XLPE power cable of 1.1 KV grade of following size

on Cable Tray as required.

357 516 Above 35 Sqmm and upto 95 sqmm Mtr 51.00 82.87 4,226.46

358 517 End Termination

Supply & Making end Termination with brass compression

359 518 gland and aluminium lugs for PVC insulated and

PVC sheathed cable of 1.1 kv grade (without cost of Cable)

362 521 PIPE & VALVES ETC.

Supply,Installation,Testing & Commissioning of 'C' Class heavy

duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589

for above 150 mm 6mm thick) with flanges and fitting

such as bends, tees, reducers, rubber insertions and

galvanized nuts and bolts of following size on surface along

363 522 wall / shaft with MS bracket, suspended from ceiling/ beam

with suspenders duly painted with two coats of primer and

finished with enamel paint of approved colour laid through pipe

or in trench after wrapping with hassen cloth after applying

coal tar primer as required as per direction of Engineer-in-

Providing laying, testing & commissioning of 'C' class

heavy duty MS Pipe conforming to IS 1239/3589 i/c

fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets

368 527 etc. in ground including welding, excavation & providing

cement concrete blocks as supports, anticorrosive treatment

with coaltar/asphalt tape as per IS 10221, refilling the trench

etc. of following sizes complete as required.

Providing, fixing, testing and commissioning of following

size manually operated hand lever type cast iron double

flanged slim seal wafer type Butterfly valves with EPDM

iron disc as per IS-13095 having pressure ratting PN -1.60

including fixing the same with supply of required jointing

materials like rubber insertion, MS nuts & bolts, paint etc. and

testing the joints with required water pressure etc. all

complete as per specification & direction of E.I.C.

Providing, fitting & fixing of following size cast iron

double flanged type dual plate Non return Valve as per IS-

5312 (Part 1): 2004 with ISI mark of pressure ratting PN-

1.60 including fixing the same with supply of required

jointing materials like flanges, rubber insertion, MS nuts &

bolts, paint etc. and testing the joints with required water

pressure etc. all complete as per specification & direction of

Engineer-in-charge.

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 41 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Supply,Installation,Testing &Commissioning of Pressure

gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves

of suitable size with all accessories as per direction

of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of

Pressure Switch with cut-off bronze ball valves with

integral strainer & flare nut (mixed ends) of suitable size

with all accessories as per direction of Engineer-in-charge.

Providing, installation, testing and commissioning of

stainless steel Y-strainer fabricated out of 1.6 mm thick

stainless steel, Grade 304, sheet with 3 mm dia holes

with stainless steel flange

Supply,Installation,Testing & Commissioning of Air

vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in

height with air release valve on top and flanged connection

to riser, drain arrangement with 25 mm dia Gun metal wheel

valve, with required accessories, pressure gauge and

painting with synthetic enamel paint as required.

379 538 WET RISER CUM DOWN COMER SYSTEM

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 150

380 539 mm dia with cast iron wheel ISI marked conforming to IS Nos 5.00 1,389.10 6,945.49

5290 (Type -A) with blank Gunmetal/Stainless Steel cap and

chain as required :

Supply,Installation,Testing & Commissioning of SS short

381 540 branch pipe with 150 mm male inlet and 19 mm outlet nozzle, Nos 5.00 575.35 2,876.73

as per IS:903 and as per direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of 63 mm NB and

15meter long RRL Fire Hose fitted 63mm intstantaneous

382 541 stainless steel male & female SS coupling, complete by Nos 10.00 1,192.81 11,928.13

GI wire binding for Internal Hydrant as per direction of

Engineer-in charge.

Providing supply & fixing of MS Hose Box for of suitable

size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30

mtr long fire hose and a branch pipe, wall mounted type as per

direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of

Swinging pattern wall fixing first aid hose reel made from MS

sheet and waterways and moving parts with rubber hose of

20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off

nozzle as per IS: 444/IS: 12585 Type-I., complete with all

accessories as per direction of Engineer-in-charge.

Providing, fitting and fixing of C.I. 25 MM single air relief valve

with stop cock confirming to IS:14845/2000 with ISI

mark for water works purpose including fixing the same

with hydrant riser including testing & commissioning the

system etc. all complete as per approved specification &

direction of Engineer in-charge.

Providing, fitting & fixing of 4-Way GM fire brigade connection

consisting of 63 mm dia instantaneous type male

couplings with built-in check valves, 150mm dia flanged outlet

386 545 complete with bolts, nuts and rubber insertions confirming to Nos 1.00 3,753.86 3,753.86

IS:904 with ISI mark including testing & commissioning the

system etc. all complete as per approved specification &

direction of EIC.

387 546 SPRINKLER SYSTEM

Providing, fixing, testing & commissioning of 15mm

dia quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories :Pendent / Upright

Providing & fixing of Water Flow Switch switable for pipe 100

389 548 mm Diameter with all accessories for all floors etc. all Nos 3.00 1,674.18 5,022.55

complete as per direction of Engineer-in-charge.

Providing, laying, testing & commissioning of Flexible Sprinkler

Hose Corrugated Unbraided type of length 1mtr for

Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet

Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL

Listed) with all complete accessories as per direction

of Engineer-in- charge.

391 550 EXTINGUISHER SYSTEM

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 42 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

Portable Fire Extinguisher System Supplying,

installation, testing and commissioning of CO2 type Fire

Extinguisher 4.5 kg capacity confirming to IS: 2878 made

from ISI marked seamless cylinder confirming to IS: 7285,

fitted with ISI marked controlled valve confirming to IS:

3224, high pressure 1mtr discharge hose & horn complete

with initial gas charged with carrying handle & wall

mounting bracket as per direction of Engineer-in-charge.

Supplying, installation, testing and commissioning of ABC type

393 552 fire extinguishers of 6 kg capacity including cost of all material Nos 9.00 995.80 8,962.24

& labour etc complete.

Supplying, installation, testing and commissioning

of Mechanical Foam type 9 litre capacity Fire Extinguisher,

ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI

marked, IS: 4989 Part II and a polyurethane coated CO2 Gas

Cartridge, ISI marked, IS: 4947 complete with gunmetal union

cap, nylon hose with plastic foam making branch and wall

bracket as per direction of Engineer-in-charge.

395 554 AUTOMATIC FIRE DETECTION SYSTEM

Supplying, installation, testing and commissioning of

Intelligent Combination Heat potoelectric Smoke Detector,

Intelligent Combination Heat Photoelectric Smoke Detector,

With Remote Indicator Output and Magnetic Test Function,

Without base (Certified by LPCB) Common Detector

Base, Common Detector Base for DI-910xE Series

Detectors and for DC-

910xE series Detectors using EOLR

Supply Installation testing and commissioning of Loop Realay

397 556 Module, Extend Loop Distance and Increase Current Capacity, Nos 1.00 4,636.27 4,636.27

24VDC required.

398 557 CONTROL PANEL

Providing S.I.T.C of Microprocessor based Addressable Fire

Alarm Control Panel (4 Loop) Intelligent Fire Alarm

Control Panel Four loops with capacity of 477 devices.

399 558 Flush-mount new structure. 30 Zones, Integrated Wide No 1.00 64,662.33 64,662.33

range PSU (100- 240V) , with all asscery and Network

Card, Battery Charger with 2 nos 12volt 9 AH Batteries

(Certified by LPCB)

Supplying, installation, testing & commissioning of Addressable

Single Output Module,Single Input Module, provides

dry contact (Loop powered) or active Input (24VDC required,

cable monitored) (Certified by LPCB)

Supplying, installing ,testing and commissioning of

Digital Manual Call Point, Flush mount Resettable (Non-

Breaking Glass), Supplied with surface mount back box

and Special Reset Key, Optional Accossories:4556356,

4556520(Certified

403 562 Electronic Hooters

Supplying, installing ,testing and commissioning of

Intelligent Sounder Strobe, Addressable Sounder with

404 563 Visible Indicator, 16 tones, high/low consumption modes, can Each 20.00 963.89 19,277.83

be loop owered or 24VDC powered, 83-89dB (Certified by

405 564 Wiring

Supplying & laying of 2x1.5 sqmm fire alarm armoured

cable,600/1000V rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS outer sheath

complete as required

Supplying and fixing metal box of following sizes (nominal

size) on surface or in recess with suitable size of phenolic

laminated, sheet cover in front including painting etc. as

required. 100 mm X 100 mm X 60 mm deep.

408 567 SIGNAGES

Providing and installing in position the following type of

sign boards made out of 3mm thick "Opaque" PVC foam board

with computer cut, PVC non-reflective self adhesive vinyle

painted foam board, complete with mirror fasteners.

Providing and fixing the signages "Fire Exit, Fire Exit

Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right" of 1.5in

410 569 height letters in white with green back ground.The size of the Nos 10.00 103.75 1,037.48

board shall be 25cm x 15 cm and shall be fixed at the height of

Supply , Installation, testing , commissioning of 48" Smart

DIGITAL SIGNAGE with all required accessories

Authorised Signatory

Bidder BOQ of Training Centre Patia Page 43 of 53 Digitally signed by NBCC

Tender for "Execution of Balance Works Rectification Works of OHPC Training Centre Patia D-Type Quarters at Rengali, OHPC, Odisha at the Risk Cost of Previous agency"

Sl. /DSR Amount

Description of Item Unit Qty Rate

No. Item (In ₹)

412 571 PH WORK

413 572 SEPTIC TANK

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or

drains (not exceeding 1.5 m in width or 10 sqm on

414 573 plan), including dressing of sides and ramming of

bottoms, lift upto 1.5 m, including getting out the excavated

soil and disposal of surplus excavated soil as directed, within a

Providing and laying in position ready mixed M-25 grade

concrete for reinforced cement concrete work, using

cement content as per approved design mix, manufactured

in fully automatic batching plant and transported to site

of work in transit mixer for all leads, having continuous