Providing LED High mast Lighting System in central Park at IA. Khurja Bulandshahar

Amount

Electrical Works.

Supply & Fixing of 20 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 4 mm top dia minimum 150 mm bottom dia 410 mm base plate 32 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site regiment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect.(Philips/Wipro/Bajaj make only)

Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect.(Philips/Wipro/Havells/Bajaj make only)CAT AA

Supply and fixing 15A TPN Capacity of automatic street light cubicle double door control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses,isolating switch metering insteument & instrument box with CTs ,Phase indicator etc. in case of TPN, complete in all respect. (Contactors,MCB,Relay,Time switch should be Siemens/Havells/L&T Make only)

Supply and wiring of submain with 2 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable in existing conduit complete in all respects. (Havells/Polycab/Grandley only)

Supply and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. (Havells/Polycab/Grandley only)

Supply and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing DWC HDPE/MS/GI/Surface etc.(Havells/Polycab/Grandley only)

Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750-1000mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.

S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect.

Supply & fixing of 70W LED Street light fitting having die cast aluminium body and diffuser with driver set confirming to IP 66 protection complete in all respect. (Philips/Wipro/Havells make only) CAT AA

Supply & fixing 32mm dia,1.20M long GI bend pipe with 02 nos. clamp of 50x6mm MS Flat suitable for fixing street light on ST pole.

Supply & fixing MS box for controling /Protection of 70W LED Street light with 04 way cadmium connector,6 Amp SP MCB, cable glands and associated material complete in all respect.

Supplying and laying of 16 sq.mm 2 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade fixing ST Pole to Pole for LED street light Mains complete in all respects.

Supplying and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects.

Supply and fixing of 25 sq. mm 3.5 core cable socket (lug) to cable leads,with insulating tape and making connection complete in all respect.

Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with GI fitting including material,labour and T&P.

Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole.

Supply and erection of double pole structure with hardware & fitting on 410-SP-56, 11 mtr. long complete with 1/6th of over all length of pole in cement concerte with one feet square/one feet dia cement, concerte plinth alround the pole above ground level. The foundations of underground will be of cement concrete in the ratio of 1:2:4. The stone ballast/Brick- ballast used will be 1.25 cm. (1/2 x 1) size with stone pad 30x30x7.5 cm. at the base, including all material, lanour & T&P required for proper completion of work.

Supply and erection of stay of HT lines for ST pole with GI anchor plate (152x152x6mm) stay rod (16mm dia x 1.85 m long) GI stay below (16mm dia rod , thriple, double stay tightener, stay insulator, clampas & stay wire (GS 7/3 .15mm) including grouting in 1:4:8 ratio of cement corcente using coars sand, over burnt brick ballast as per direction of engineer in charg complete in all respect.

Supply & fixing of 11 KV pin with insulator on channel arm fixed on ST/DP including cost of all nuts, bolts, washers, T&P ,men and material.

Supply and fixing of anticlimbing device fabricated from G.I. flat of 25mmx6mm size in a sape of ring of the pole size, heving G.I flat pointed fins of length 225 mm in 8 nos. and also barbed wire in 200 mm length above the said ring including material.

Supply & fixing 11 KV disc insulator with galvanised insulator fitting,ball and socket type complete with strain clamps,bolts,nuts,washer etc including cost of material,men and T&P.

Suply & fixing M.S. droper channel of 100x50x2000mm including cost of holding clamps and material men & T&P.

Painting of S.T. poles and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint on length above 10M support above the ground level or as per direction of Engineer in charge of work/site including all T&P, men & material for proper completion of work .

Supply and insatallation, testing & commissioning of outdoor type Aluminium wound oil cooled transformer of rating 25 KVA, 11/0.4 KV on double pole including cost of base channel & holding clamps .

Supply,sagging,jointing and binding of ACSR weasel conductor including cost of aluminium tap binding wire and jointing sleaves etc including cost of material,men and T&P.

Supply & fixing 11 KV TPMO with complete with insulator & other acessories (standered make as approved make of UPPCL/DVVNL

Supply & fixing 11 KV fuse set with complete with insulator & other acessories.(standered make as approved by UPPCL/DVVNL).

Supply & fixing of T-off channel/Misc channel/other item. as per site requirment.

Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.

Vashu Enterprises

M/S MANOJ ELECTRICALS