WBPWD/SE/SC_SS/NIT04/2019-2020

Amount

Supplying erection, testing & commissioning of Electric Motor Driven Horizontal, centrifugal Fire pump of capacity 171 m3 / hrs. at 88 MWC, 2900 RPM of Kirloskar / KSB / Mathur & Platt make with coupling & coupling guard, base frame as necessary foundation in all complete as per specification and direction of the Engineer-in-charge. (TFC Motor & Bronze impaller) Pump rate of operation shall upto 150% of rated discharge with adequate Mortar rating for said rated flow i.e. 65% as per specification and direction of the Engineer-in-charge.

Supplying erection, testing & commissioning of Electric Motor Driven Horizontal, centrifugal Jockey pump of capacity 11.0 m3 / hrs. at 88 MWC, 2900 RPM of Kirloskar / KSB / Mathur & Platt make with coupling & coupling guard, base frame as necessary foundation in all complete as per specification and direction of the Engineer-in-charge. (TFC Motor & Bronze impaller)

Supplying erection, testing & commissioning of Diesel Engine driven horizontal centrifugal Fire pump of capacity 171 m3 / hrs. at 88 MWC, 1800 RPM of Kirloskar / KSB / Mathur & Platt make with coupling & coupling guard, base frame as necessary foundation in ..all complete, with diesel engine of heat exchanger cooled of Cummins / Kirloskar etc. make all complete as per specification and direction of the Engineer-in-charge. Pump rate of operation shall upto 150% of rated discharge with adequate Mortar rating for said rated flow i.e. 65% as per specification and direction of the Engineer-in-charge.

Supplying, fitting & fixing of MS Black Pipes – IS:1239 (Medium) of TATA or JINDAL make with all necessary accessories, specials, viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, welding, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (a) 200 mm NB (6 mm thick suction of pump)

(b) 150 mm NB

(c) 80 mm NB

(d) 50 mm NB

(e) 25 mm NB

Supplying, fitting & fixing Sluice valve PN 1.6 NB Rising Stem conforming of approved brand and make with companion Flanges, Nut & bolts etc. all complete bearing IS 14846. (a) 200 mm NB

(b) 150 mm NB

(c) 80 mm NB

(d) 50 mm NB

Supply, erection, testing & Commission of Cast Iron double flanged Non return valve (IS: 5312) following sizes conforming to relevent IS: specifications and tested for a minimum pressure of 16Kg/Sq.cm. for sheet and 24 Kg/sq.cm. for shell including providing and fixing Nuts & Bolts gaskets. Washers etc. complete as required. (a) 150 mm NB

(b) 50 mm NB

(c) 25 mm NB

Supply, installation, testing commissioning of CI Foot Valve with stainer as per IS including supply of nuts, bolts, gasket etc. all necessary fittings complete all respect (materials used shall have ISI marked) (a) 200 mm. NB Foot Valve

(b) 80 mm. NB Foot Valve

Supplying, fitting & fixing Gun Metal Glove Valve rising stem conforming of approved brand and make with companion Nut & bolts etc. all complete bearing IS 778. (a) 25 mm NB

(b) 15 mm NB

PVC Priming Tank with Accessories Cap. 1000 ltr. The priming tank would be connected with over head tank through float valve. Level gauge to be provided. Overflow pipeline to be extended upto the nearest surface drain. No electrical instrument or control valve is envisaged excepting for level switch. The scope would include providing 1 Nos. of priming tank or 1000 ltr. Capacity complete with the following : (a) Inlet valve (Globe type) (b) Pressure reduction arrangement. (c) Float valve arrangement (d) Drain valve arrangement. (e) Manhole. (f) Overflow arrangement.

Supplying, fitting, fixing of Pressure gauge with half coupling, nipple, root valve adapter, 3-way gauge cock, vibration dampner as per specification and direction of the Engineer-in-charge complete in all respect.

Supplying, fitting, fixing of Pressure switch with half coupling, nipple, root valve adapter, 3-way gauge cock, vibration dampner as per specification and direction of the Engineer-in-charge complete in all respect.

Supplying, fitting, fixing & commissioning of MCC cum annunciation panel as per specification and satisfaction of the Engineer-in-charge.

Supplying & fixing of Power cable Power cable (3 1/2C x 90 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge.

Supplying & fixing of Power cable Power cable (3 1/2C x 25 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge.

Supplying & fixing of Control cable and cable tray (10C x 1.5 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge.

Supplying & fixing of Control cable and cable tray (2C x 1.5 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge.

Earthing with 40 mm dia GI pipe 6 mm thick for all motors, panels etc. as per requirement and satisfaction of the Engineer-in-Charge.

Supplying & fixing of earthing as per IE Rules including earth strips/connection all complete to main bus and testing etc. all complete as per requirement and satisfaction to the Engineer-in-Charge.

M. S. structural works in Gate, columns, beams, truss etc. with simple role structural members (e.g. joists, angle, channel sections conforming to IS :226, IS : 808 & SP (6)-1964 connected to one another with bracket gusset, cleats as per design, direction of Engineer-In-Charge all complete including labour for the work including all incidental charges such as electricity charges and as per specification and direction of the Engineer-in-charge.

Supplying, fitting & fixing of MS Black Pipes – IS:1239 (Medium) of TATA or JINDAL make with all necessary accessories, specials, viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, welding, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (a) 200 mm NB

(b) 150 mm NB

(c) 80 mm NB

Supplying, fitting & fixing of MS Black Pipes – IS:1239 (Medium) of TATA or JINDAL make with all necessary accessories, specials, viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, welding, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position under ground. (a) 200 mm NB

(b) 150 mm NB

(c) 100 mm NB

(d) 80 mm NB

(e) 65 mm NB

(f) 50 mm NB

(g) 40 mm NB

(h) 32 mm NB

(I) 25 mm NB

Applying Anticorrosive tape with pipokate tape of 4 mm thickness and one coat of synthetic black enamel paint, all complete as per direction of the Engineer-in-charge. (a) 150 mm NB

Supplying, fitting & fixing cast iron Air Release valve of approved brand and make bearing ISI Marking tested to 21 Kg. Per cm. Sqm. (a) 15 mm NB with root valve (ball type)

Supply fixing & fitting of SS Hydrant valve (ISI marked) single headed Type -A with stand pipe and bend for outdoor hydrants as per specification and direction of the Engineer-in-chare all complete.

Supply fixing & fitting of Landing valve (ISI marked) single headed Type -A with stand pipe and bend for outdoor hydrants as per specification and direction of the Engineer-in-chare all complete.

Supply fixing & fitting 63 mm dia x 15 M long hose with couplings as per IS:8423, Type-A as per specification and direction of the Engineer-in-chare all complete.

Supply fixing & fitting Hose cabinet with support and foundation for outdoor hydrants system of approved quality all complete as per specification and direction of the Engineer-in-charge.

Supply fixing & fitting S. S. Jet Nozzle with branch pipe IS 903 of (ISI marked) all complete as per satisfaction and direction of the Engineer-in-charge.

Supply fixing & fitting Swinging Hose reel drum & SS bend pipe with 20 mm dia 30 m long rubber hose including nozzle complete with Globe valve and pressure reducing valve of 25 mm NB (IS:884) all complete as per satisfaction and direction of the Engineer-in-charge.

Supply, erection, testing and commissioning 3-way fire brigade inlet connection with inbuilt non return valve (ISI marked) for riser all complete as per specification and direction of the Engineer-in-charge.

Supplying, fitting & fixing G.M. Ball valve as per BS:5351 and make bearing ISI Marking all complete as per direction of the Engineer-in-Charge. (a) 25 mm NB

(b) 15 mm NB

Supplying, fitting & fixing Sluice valve PN 1.6 NB Rising Stem conforming of approved brand and make with companion Flanges, Nut & bolts etc. all complete bearing IS 14846. (a) 150 mm NB

Supplying, fitting, fixing of Pressure gauge with half coupling, nipple, root valve adapter, 3-way gauge cock, vibration dampner as per specification and direction of the Engineer-in-charge complete in all respect.

Supply, erection, testing and commissioning of ISI marked Instrument Control Valve of 150 NB all complete with Nuts & Bolts, Gaskets conforming to IS-13095 of following sizes as required.

Supply, erection, testing & Commission of Cast Iron double flanged Non return valve (IS: 5312) following sizes conforming to relevent IS: specifications and tested for a minimum pressure of 16Kg/Sq.cm. for sheet and 24 Kg/sq.cm. for shell including providing and fixing Nuts & Bolts gaskets. Washers etc. complete as required. (a) 150 mm NB

(b) 100 mm NB (Wafer Type)

Supply, erection, testing and commissioning of ISI marked Butterfly Valve of rating PN 1.6 with bronze/gunmetal seat complete with Nuts & Bolts, Gaskets conforming to IS-13095 of following sizes as required. (a) 150 mm NB

(b) 100 mm NB

(c) 80 mm NB

Supply fitting & fixing Standard Response Sprinkler head of K-5.6 US maximum working pressure 175 PSI and 680C temperature raring chrome plated finished, UL listing all complete as per specification and direction of the Engineer-in-Charge.

Supply fitting & fixing Sprinkler flexible drop of 1.00 mtr. Long with maximum service pressure 175 PSI of UL listed all complete as per specification and direction of the Engineer-in-Charge.

Supply fitting & fixing flow switch of approved brand and make bearing ISI marking all complete. (Make : Apollo/Honeywell/ Bosch) (a) 100 NB

Supply fitting & fixing Monitor Module with all accessories. (Make : Siemens/Honeywell/Bosch)

Supplying & fixing of Control cable (2C x 1.5 mm2 FRLS Cu.) including 20 mm PVC Conduit all complete as per requirement and satisfaction of the Engineer-in-charge.

Supply fitting & fixing flow switch monitoring Panel provision for 2 Loops and installation with single loop card of approved brand all complete. (Make : Apollo/Honeywell/ Bosch)

Supply, erection, testing & commissioning of 6.0 Kg. Cap. ABC (SP) type Fire Extinguisher (ISI marked) complete with fixing bracket & other accessories.

Supply, erection, testing & commissioning of ISI Marked 6 Kg Mechanical Foam (AFFF) (SP) type Fire Extinguisher complete with tube, adaptor etc.

Supply and installation in position the "FIRE EXIT" sign with luminicent colour having size 300 x 100mm

Supply and fixing in position the signages "FIRE ORDER" contain the following matter on 3 mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm

EASTERN TRAFFIC SAFETY SOLUTIONS PRIVATE LIMITED

S. D. CO OPERATIVE LABOUR CONTRACT & CONSTRUCTION SOCIETY LTD.