DEPOSIT-Providing Mechanical shutter at Thevarakkadavu thodu in Kannambra- Alathur Block Panchayath-Fabrication, painting and erection of MS shutters, SS C-grooves and hoisting mechanism at Thevarakkadavu check dam in Kannambra-

Amount

DISMANTLING existing shutter and hoisting bridge, DEMOLISHING, FORM WORK, REINFORCED CEMENT CONCRETING, PLASTERING and PAINTING

OD10806/2022-2023:Providing BUND - 1m bottom width and 0.5 m height using empty gunny bar polythene bag filled with earth for an total length of 1 m including labour. Vol. of bund 1*0.5*1=0.5m3 No. of bags 0.5/0.027 =19nos

OD10807/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight )/ Hoisting unit, Embedded parts, etc. of the same and stacking at a distance of 100 metre including hire of machinery, labour etc. complete as directed by the departmental officer at site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%)

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

OD10778/2022-2023:DRILLING (up to depth of 150mm for TMT rod dia. up to 25mm) and FASTENING with TMT rod in concrete/Stone including conveyance and labor charges complete. [excluding cost of materials already supplied.]

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

SUPPLY, FABRICATION, PAINTING and ERECTION of embedded parts, shutter, hoisting mechanism, hoisting bridge and handrails.

OD10780/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD10779/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD10920/2022-2023:Supply of MS round bar including cost of conveyance charges

OD10783/2022-2023:Supply of MS chequered plates including cost of conveyance charges

OD10782/2022-2023:SUPPLYING & STACKING of Dia 32 mm G.I. PIPE

OD10784/2022-2023:Supply of MS BOLT and NUT up to 300mm Length including cost of conveyance.

OD13777/2022-2023:Supply of SS BOLT and NUT up to 300mm Length including cost of conveyance.

OD10787/2022-2023:SUPPLYING & FIXING of TOWER BOLT

OD10786/2022-2023:BUTT HINGE

OD10785/2022-2023:SUPPLYING and STACKING of PAD LOCK.

OD10789/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance.

OD11228/2022-2023:Providing base and nut arrangement for hoisting the shutter including cost of all materials, labour, etc. complete

OD10790/2022-2023:Providing EN-8 screw rod 7.50 tonne capacity 4.00 M lift screw hoist having one number of EN-8 screw shaft, worm gear units having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance. 1m Screw rod, dia 67mm with single start square thread with head pitch of 12.7mm, root dia 62.3mm EN -8 shaft

OD10788/2022-2023:THREAD LESS portion of the screw rod (per metre rate)

OD10792/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

OD10791/2022-2023:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD10793/2022-2023:Fabrication and erection of Embedded parts of Canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

OD10794/2022-2023:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, Seal seat etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, machinery for planing, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete

OD10795/2022-2023:Fabrication and supply of Structural steel Canal shutters ( Up to 2 tonne weight ) /Hoisting bridge/ Platform and accessories etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD10798/2022-2023:Painting all the exposed surfaces of the Hoisting bridge and its hand rails etc. with two coats of EPOXY PAINT over two coats of epoxy primer after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of Tools and Plants etc. complete as per the direction of department officers at site.(#)

OD10799/2022-2023:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

OD10800/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting bridge/ Platform including hand rails, ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges etc. complete but excluding cost of materials already supplied

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries

Fabtech Engineers and Contractors

Ashique Fabricators

ANILKUMAR K K

Bidder Name

Ashique Fabricators

V M Asharaf

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries

ANILKUMAR K K

Fabtech Engineers and Contractors