Providing CAD work to LIS Binga Samour and Saklana in Tehsil Dharampur Distt. Mandi HP Under HIMCAD

Amount

Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.

Laying jointing and commissioning of HDPE (High Density Polyethlene pipe) of following diameter and class confirming to IS 4984-1995 with fusion welding process including all necessary fitting & bend leads and lifts to the entire satisfaction of Engineer-in-charge (earth work in ternches to be mesured and paid separately)

HDPE pipe 75 mm dia PN 4 PE-80

HDPE pipe 90 mm dia PN 4 PE-80

HDPE pipe 110 mm dia PN 4 PE-80

Repair & restoration of HDPE joints (Mechanical) of following dia complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.

HDPE pipe 75 mm dia PN 4 PE-80

HDPE pipe 90 mm dia PN 4 PE-80

HDPE pipe 110 mm dia PN 4 PE-80

Providing and fixing HDPE end cap of following dia complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.

75 mm dia

90 mm dia

110 mm dia

Providing and fixing HDPE bends of various degree of following dia complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.

75 mm dia

90 mm dia

110 mm dia

Providing and fixing HDPE reducer of following dia complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.

110mm x 90mm

90mm x 75mm

Providing and fixing HDPE Tees of following dia complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.

110mm x 110mmx110mm

110mm x110mm x 75mm

90mm x 90mm x 90mm

110mm x 110mm x90mm

Providing and welding M.S. flange following table at suitable point, conforming to IS 6392-1971 (Latest with upto date amendments)and welding of MS flange with plain end GI pipe in requsite number of layers on both faces to make the joint leak proof The welding of flanges should conform to IS:816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364. including cost of gasket sheet nuts & bolts. The thickness of gasket sheet not less then 3.00mm conforming to IS 2712-1998. The work shall be done to the entire satifaction of Engineer in Charge with in all leads and lifts.

MS flange joint 80 mm dia Table-5

MS flange joint 100 mm dia Table-5

MS flange joint 125 mm dia Table-5

C/O Outlet chamber including all acessory and complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.

Providing and fixing of HDPE Flanges complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.

Kuldeep kumar sharma (BID ID -463878)