Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | Muraleedharan AR L1 | Sijo John C. L2 |
|---|---|---|---|---|---|
| 1.00maintenance works | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.23 | cum | 356 ₹438.95 Lowest | 380 ₹468.54 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.11 | cum | 9,235.97 ₹997.48 Lowest | 9,500 ₹1,026 |
| 1.00 | 4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts | 1.44 | sqm | 1,008.55 ₹1,452.31 Lowest | 1,008.55 ₹1,452.31 Lowest |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 210.88 | kilogram | 116.69 ₹24,607 Lowest | 116.69 ₹24,607 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 175 | kg | 194.27 ₹33,997.25 Lowest | 194.27 ₹33,997.25 Lowest |
| 1.01 | OD113217/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 43.75 | sqm | 621.1 ₹27,173.13 Lowest | 650 ₹28,437.5 |
| 1.01 | OD116828/2025-2026:supplying and fixing 150mm inner PVC square cut section with brackets at the end of sheet or
tiled roof for rain water | 12.5 | metre | 636.95 ₹7,961.88 Lowest | 680 ₹8,500 |
| 1.01 | 50.18.9.8.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2 | 10 | metre | 363.01 ₹3,630.1 Lowest | 363.01 ₹3,630.1 Lowest |
| 1.01 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 36.12 | sqm | 240.02 ₹8,670.72 Lowest | 240.02 ₹8,670.72 Lowest |
Tender Value
₹2.5 L
EMD Value
₹6,350
Closing Date
18 Aug 2025, 4:00 pmClosed
AE
ae
EDAKKALATHUR HOMEO DISPENSARY
2025_LSGD_783763_1
EDAKKALATHUR HOMEO DISPENSARY
Open Tender
Civil Works - Roads
Item Rate
THOLUR G P
EDAKKALATHUR HOMEO DISPENSARY
3 documents required · 3 mandatory
₹560
Yes
₹6,350
Yes
31 Mar 2026
8 Aug 2025
19 Aug 2025
8 Aug 2025
18 Aug 2025
8 Aug 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1287507.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
SBD.pdf
Tender Documents • 1.79 MB
BOQ_1287507.xls
BOQ • 0.24 MB
FORMS.pdf
Tender Documents • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .