Upgradation of office chambers, seating arrangements of office staffs and repairs of 2 nos. Toilets of CDAO , Puri, Dist-Puri

Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead etc. complete. as per direction of Engg.-in.charge.

Removing old lime or cement plaster from walls/Ceilings including raking out joints 12 mm deep and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge.

Ground Floor

Scraping old paint with scrapers. sand papermg and I washing with soap water or soda including scaffolding charges above 5M high and upto 8M height etc. complete. as per direction of Engg.-in.charge.

Ground Floor

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge.

Ground Floor

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge.

Ground Floor

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge.

Ground Floor

16mm thick cement plaster in cement mortar (1:6) including necessary scaffolding curing etc. as per direction of Engg.-in-Charge.

Ground Floor

First Floor

6mm.thick cement plaster with C.M(1:4) to RCC surface including closed deep chipping and slury treatment etc. complete as per direction of Engg.-in-Charge.

Ground Floor

First Floor

Wall Priming one coats on new work with wall water bound primer of approved shade as per direction of Engg-in-Charge .

Ground Floor

First Floor

Wall painting one coats with weather coat paint of approved shade on old work to give an even shade as per direction of Engg-in-Charge (Data for 10 sqm)

Ground Floor

1st Floor

4cm.thick grading concrete (1:2:4) on roof slab using 12mm.& down grade size CBHG chips including cost,conveyance and royalty of materials curing etc.complete as per direction of Engg-in-Charge .

Ground Floor

Iron work wrought and put up in trusses and record racks including all labour and Materials etc, as per direction of Engineer -in -charge.(for Battary Stand)

Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.

Ground Floor

1st Floor

Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge .

Ground Floor

1st Floor

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete including Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge.

Ground Floor & 1st Floor

Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.(make crompton, havells, Bajaj, usha, orient etc)

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall

Cutting holes in R.C.C floors and roos upto 19cm thick for passing G.I/P.V.C pipes and fitting etc. and prepairing the holes after insertion of pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof as per Engg.-in- charge.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification etc complete as per Engg.-in- charge.

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete as per direction of Engineer-in-Charge

75mm OD P.V.C. SWR S/S Pipe (ISI type-A)

110mm OD P.V.C. SWR S/S Pipe (ISI type-A)

Laying in trenches unplasticised PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately)

125mm dia rigid UPVC pipe Class -3 (0.60Mpa)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge

20mm dia pipe

25mm dia pipe

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansios etc complete as per direction of Engineer-in-Charge

75 mm dia PVC SWR coupler

110 mm dia PVC SWR coupler

Single tee with door

75 x 75 x 75mm dia PVC SWR Tee

110 x 110 x 110mm dia PVC SWR Tee

SWR Plain Bend 87.5°

75mm diaP.V.C. SWR plain bend 87.5

110mm diaP.V.C. SWR plain bend 87.5

SWR Plain Door Bend 87.5°

75mm diaP.V.C. SWR plain bend 87.5

110mm diaP.V.C. SWR plain bend 87.5

Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. etc complete as per direction of Engineer-in-Charge

‘P’ trap (with horn or without horn)

‘S’ trap (with horn or without horn)

Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification all etc. complete as per direction of Engg. in charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixers etc. complete as per direction of Engg. in charge.

1st floor

Fixing Wash Basin with hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damages etc. complete as per direction of Engg. in charge. For Wash Room Porcelain 22"x 16"(550x400) W.H.B with pedestal

Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556- Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification etc. complete as per direction of Engg. in charge. One-seated Urinal 1m x 0.50m x 0.15m size

All floor

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.etc. complete as per direction of Engg. in charge. Porcelain Flat back standing Urinal (Small) 430 x 260 x 350 with Waste Pipe

All floor

Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specificationetc. complete as per direction of Engg. in charge.

All floor

Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specificationetc. complete as per direction of Engg. in charge.

All floor

Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.

15mm Short Body Bib Cock

All floor

15mm Long Body Bib Cock

Fixing of Brass Screw-down Angle/Counseales stop cock Cocks polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.

15mm dia CP Brass Angle Stop Cock

All floor

20mm dia CP Brass Concealed Stop Cock

All floor

Fixing of Brass 15mm dia CP flange of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.

15mm dia CP flange

Fixing Bib Cock capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification etc. complete as per direction of Engg. in charge. 15 mm dia C.P Pillar cock with swinging spout

C.P.revolving shower (bend type)

All floor

CP Health Foucet with 1.0 mtr PVC Tube

All floor

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specificationetc. complete as per direction of Engg. in charge.

600mm x 450mm bevelled edge mirror

Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.

C.P. glass self with glass

All floor

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. complete as per direction of Engg. in charge.

C.P. towel rail.(600x20)mm

All floor

Fixing (a) Liquid Soap Container – Glass container or Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brass screws or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.

C.P Soap holder/disc.

Supply , fitting and fixing of following fixers including all materials and labours etc all complete as per specification complete as per direction of Engg. in charge.

450x450mm Square Man Hole Cover -16.0 kg

110mm dia PVC SWR Single Y with door

PVC SWR Jalli 110mm dia

110 mm dia P.V.C. SWR Vent Cowl

UPVC BALL VALVE Sch-80 (Solvent Welded with Metal Ball)

25mmdia

Providing , fitting and fixing 75mm thick skinned Partly Glass & Partly Soilid partition suitable fixed to the wall and floor and storage unit with 19mm ply wood frame work at 600 mm C / C with 19mm thick BWR ply on either side and at places and finished with 1mm thick laminate fixed to the ply on both sides and fixed with 8 mm thick float glass insert as per the design and specification with necessary wood plain / moulded beading including the cost of all materials , labour , nails, screw adhesives, overhead T & P etc. complete. The exposed frame work shall be polished / painted etc. complete as per direction of Engineer in charge.

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with l nm1 thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engg-in-Charge . as per SR-2022, Page No.-234, Sl. No.-9

Suppy fitting and fixing of FRP door chaukatha of size 0'-5''x0'-2.5'' frame will be mitred & Jointed with self driven self tapping

screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge.

Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete. SR-2022, page No.-234, sl no,-5

Supplying and fixing of extra copper pipe with Nylon insulation etc. as required as per direction of Engineer in Charge.

Supplying and fixing of angle frame etc. as required as per direction of Engineer in Charge.

Ground Floor

Wall Priming one coats on new work with wall water bound primer of approved shade as per direction of Engg-in-Charge .

Ground Floor

Eamel Painting two coats with enamel paint over one coat of primer of approved quality etc. complete as per direction of Engg-in-Charge .

Ground Floor

Wall painting two coats with Plastic emulsion paint of approved shade as per direction of Engg-in-Charge .

Recessed wiring to submain in the following sq.mm FR PVC insulated singIe core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexibIe conduit 1.6 mm thick aIong with the following sq.mm FR PVC insulated single core multi strand copper conductor as earth wire as Make- of wire- Finolex/ LT/ Anchor/ Polycab/Havells/ Great white/ RRY V-Guard/ HPL)

2 X 1.5 sq.mm +1 X 1.5 sq.mm in 2O mm dia

2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-

2 X 4 sq.mm +1 X 1.5 sq.mm -do-

4 x 10 sq.mm + 1 X 4 sq.mm -do-

Re-wiring for light point / fan point / exhaust fan point / caII bell point with 1.Ssq.mm FR PVC insulated singIe core multistrand copper conductor ISI marked and 1.5 sq.mm FR PVC insulated copper conductor singIe core multistrand copper conductor in existing recessed PVC/STEEL conductor including dismantling as required.

Group-A

Group-B

Group-C

Supply and drawing of following sizes FR PVC insulated si ngIe core muItistrand copper conductar in existing surfa ce/ recessed/ STEEL / PVC conduit as required.

1 X 1.5 sqmm

S/F of 3 pin. 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc as required. (Make - Gona/ Anchor/ G reatwhite)

S/F of Ding dong bell (Make - Cona/ Anchor/ Greatwhite)

S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required .(Make - Cona/ Anchor/ G reatwhite)

Supply of rixing of 40 mm GI Brackt with 2 nos GI clamp & 4 nos 3" Anchor fasteners for fixing of street light.

S/F of PVC Tape (Make - Steelgrip/ Cona/ Anchor/ Greatwhite)

Supply and fixlng of Different type LED Lights (Make-Hazells/ Crom ption/ wi pro/ panasonic/ Philips)

18 Watt LED tube lights

Supply and fixing of LED round / square recess mounted panel Lights (Make-Havetls7 cromption/ wipro7 panasOWtC/

24 Watt (284 mm x 284 mm)

Supply and fixing of following ¢lifferent DD DB BOX .(Make- Legrank/ Simens/ schneider)

2Oway, SP N DD DB BOX.

Supply and Fixing of of 6Amp to 32A rating 240 V/415 V "C” series MCB suitable for lighting and other Ioads of the following poles in the existing MCB DB ISI marked complete with connections testing and Commissioning etc. (Make-Havell/L& T/C & S}

1OOA 4P MC B

Supply and fixing of 6Amp to 32A rating 240 V/415 V ”C" series MCB suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Legrand/Simens/ schneider)

6 to 32 SP MC B

6 to 32 DP MC B

63A FP MCB

Supply and fixing of 4 pole MCCB thermal magnetic Protection in existing cubicle paneI borad including drilling holes in cubicle panel , making connections, etc. as required.(Ma ke- HavelIs/ C&s/ L&Tj

2OOA 25KVA

S/F of On Ioad change over 4pole in Open Execution (Make-Havells/ C&s/ L&T)

Earthing.

Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 4Omm dia ISI marked including accessories and providing masonary with charcoal and salt as required.

Extra for using saIt and charcoal for G.I or copper pipe earth elctrrode as required

Providing and fixing of 8 SWG (4 m m) dia copper wire on surfaceor in recess for loop earthing along with existing surface / recessed conduit as required.

Cost of 16/ 18 SWG panel box 2x(36x36)+(36x8)+(36 x8h) sq inch for single door made out of CR sheet of 16/ 18 SWG and boarder angle frame to provide above pannel with proper space,hinges, and other accessories hinged door etc.

Provision of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 2x(36x36)+(36x8)+(36x8h) including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.

Cost of Powder Coating 4 x(36x36)+(36x8)+(36x8h)

Cost of Copper flat

Cost of Drum Insulator (63 - 3OOA)

Cost of CT coil

Cost 4 pole spreaders link

Cost of indicator lamp with trangular switch

Supply and fixing of Danger Board (200mmx 150mmx2 mm)

Recessed wiring to light point/Fan point Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduit with 6Amp, 25OV Modular switch(Legrand mylincY Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent) ISI marked and ceiling rose Isl marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories ana connection.(Make of wire-L&T/Anchor/HavelIs/V- Guard/Great VVhite/HPL)

Group-A -L.P- 5 .FP- C.B.P-

Group-B L.P- 7 .FP- C.B.P-

Group-C L.P- 16 . FP- C.B.P-3

Supply and fixing of 6Amp plug with 6Amp switch on existing board( Legrand mylinc/ Schneider clipsal/Hager insysta/or equivalent)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp Modular sockets and 6Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent )

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6amp, 16Amp socket outlet and 16Amp Modular switches connection ( Legrand mylinc/Schneider clipsal/Hager insysta /or equivalent)

Supply and fixing of Electronics step type Modular fan regulator. ( Legrand mylinc/Schneider clipsal/Hager insysta/or equivalent)

S/F of Multipurpose board consisting 3nos. 6Amp plug and switch Modular on metal box and Modular cover with all connections t Legrand mylinc/ Schneider clipsal/Hagar insysta/ or equivalent)

Supply and fixing of Modular switch ,Socket , ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)

6Amp switch

(Modular type )( Legrand mylinc/ Schneider clipsal/Hager insysta// or equivalent)

6Amp socket (Modular type)( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/or equivalent)

16Amp switch (Modular type )( Legrand mylinc/ Schneider clipsal/Hager insysta// or equivalent)

16Amp socket.(Modular type )( Legran¢J mylinc/ Schneider clipsal/Hager insysta/ or equivalent)

1 module Blank plate ( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Oura/ or equivalent)

32 A DP modular switch with indicator, ISI marked

Supply and fixing Modular base & cover

1/2 module

12 module

16 module

Supply and fixing Modular base & cover

1/2 module

Supply and fixing Modular G.I. Box