CERTAIN REPAIR TO MD ACCN AND PROVN OF ADDITION/ ALTERATION OF EXHAUST FAN IN A AND B TYPE QUARTERS OF DAD COLONY AT RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed.

Dismantling of asbestos cement (corrugated or semi corrugated, etc) sheets in roofs covering complete all as specified and directed.

Supply & fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete aa as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour Glazed ceramic tiles of size 375x250x7mm thick, coloured, printed/ design and pattern as approved fixed as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material & Labour coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish to a dostance not exc 50 m complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even without using extra cement complete all as specified and directed.

Material & Labour for 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceiling , finishing the surfaces fair and even without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface by providing with additional thickness as floating / setting coat complete all as specified NOTE -WPC shall be measured and paid separetely.

Supply only WPC complete all as specified and directed.

Supply & fixing GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc including all laps, cutting , waste complete all as specified and directed. .

Material & Labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. .

Material & Labour for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. .

Material & labour for preparing new plastered or unplastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as pecified and directed.

Material & Labour for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Material & Labour for preparation of old decorated plastered or unplastered surfaces of ceiling including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described,over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described,over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material & Labour for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treading oil and greasy spots and applying one coat of cement base paint wash complete all as specified and directed.

Material and Labour for preparation of old plastered surfaces by scraping down, washing , rubbing down and stopping of distempered surface and applying two coats of oil bound distemper on wall complete all as specified.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

Material & Labour for lean concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material & Labour for lean concrete 1:5:10 type C2 using 40mm graded brick aggregate as in foundation, filling and mass concrete in suncken portion complete all as specified and directed.

Material & Labour for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc all as specified and directed.

Material and labour 30mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring and finishing the surface even and smooth without using extra cement complete all as specified.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 Sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down shutter only area exc. 1.00 sqm but n exc 2.0 sqm each and removed by the contractor complete all as specified and directed.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete as specified and directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1.of SSR Part-II 2010. thickness of inserted panel not less than 10mm thick complete all as specified and directed.

Supply & Fixing 150 mm size aluminium handle plate type anodised complete all as specified and directed.

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing150mm long Aluminium tower anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Supply & Fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply & Fixing in repairs of galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing including cleaning for refixing or removal from site complete all as specified and directed.

Material & Labour for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Material & Labour for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Dismantling water tanks of any description, capacity exceeding 250 litres but not exceeding 500 liters complete all as specified and directed.

Supply & Fixing coloured rotational moulded polythene water storage tanks Triple layered (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram of complete all as specified and directed.

Supply & Fixing angle cock 15 mm bore brass chromium plated, screwed both ends for pipes or for unions fixed in repairs including making good to match with existing surface complete all as specified and directed

Supply & Fixing in repair 15mm dia bib tap cast copper alloy chromium plated long body, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Supply & Fixing vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with intregal foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etc complete including making good to floor complete all as specified and directed fixed in repairs complete all as specified and directed.

Supply & Fixing in repair polymer white (polypropeylene Delrin and ABS) low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731, complete all as specified and directed.

Supply & Fixing in repair vitreous china, wash down water closet pan (pedestal pattern with P or S trap) white, ( excluding flush pipe & flushing cistern) including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, connecting to trap, flush pipe , anti syphonage pipe etc complete all as specified and directed.

Supply & fixing plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device ccomplete all as specified and directed.

Supply & Fixing in repair 100mm dia CP grating with or without hole complete all as specified and directed.

Supply & Fixing in repair Brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed bore dia of pipe 15mm complete all as specified and directed.

Supply and fixing Gate valve 20 mm dia cast copper alloy, high pressure with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified .

Supply and fixing in repairs sink with drainage board made of stain less steel 1mm thick kitchen or laboratory with plug washer and waste incuding bedding in cement mortar on to dwarf wall or incuding fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowel size 410mm x 330mm x160mm complete all as specified.

Supply & Fixing rolled mild steel work such as roof trusses ( framed) purlin , crane , gantries, rails and fatenings and heavy bracketframing including distance pieces, cleats etc confirming to Fe-290 Gde E-165 complete all as specified and directed.

Supply & Fixing mild steel framed work such as grills,iron doors , grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, welded wire mesh and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Taking down AC/CI/PVC rain water pipes (any size or pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed.

Supply & Fixing 100 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls with mild steel work as in small articles such as stack clamps, flat iron, stays, including bolts and nuts and securing ends of stays to wall complete all as specified & directed.

Supply & Fixing 75 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls with mild steel work as in small articles such as stack clamps, flat iron, stays, including bolts and nuts and securing ends of stays to wall complete all as specified & directed.

Supply & Fixing in repairs 100 mm dia cast iron bend (any radius)diminishing pieces or tapers including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs 75 mm dia cast iron bend (any radius)diminishing pieces or tapers including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs CI branch pieces, single (equal or unequal) ordinary or inverted(Spigot or socket tyes) or with parellel branches, 100 mm bore fitted with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs CI branch pieces, single (equal or unequal) ordinary or inverted(Spigot or socket tyes) or with parellel branches, 75 mm bore fitted with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing 100mm cast iron sanitary connections -short connection pipe of length upto 300mm complete all as specified and directed.

Supply & Fixing in repairs cast iron floor trap with grating including jointing to waste pipe in run lead joint diametre of outlet 75mm complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out,retruning , filling and ramming earth or broken rubble mixed with earth around , in layers and removing surplus soil to a distance n exc 50m in hard/dense soil complete all as specified and directed.

E/M works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

Supply & Fixing point wiring for one light point/ fan/ bell/ (independent)point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed ( Note ;- wiring shall be done in colour coding as directed by Engineer in charge )

All as per item No.73 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.73 above one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 73 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing call bell ding dong AC, 230V single pole complete all as specified and directed,

Supply & Fixing bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type including taking down old MCB complete all as specified and directed.

Supply & Fixing MCB single pole & neutra, 240 volts,25 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type including taking down old MCB complete all as specified and directed.

Supply & Fixing MCB Triple pole & neutral , 415volts, 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type including taking down old MCB complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/ flush to the wall including taking down existing DB complete all as specified and directed .

Supply & Fixing sheet metal enclosure for DBs(double door type) Triple pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed sunk/ flush to the wall including taking down existing DB complete all as specified and directed .

Supply and fixing in repair Sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6.0 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduit pipe 25mm dia with all accessories and one continuous run of 4.0 Sqmm copper conductor PVC including cutting chases in brick/ stone masonary wall for fixing conduit , platering, finished to match with the existing surfaces including taking down of existing wiring complete all as specified and as directed. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Supply & Fixing high quality indoor type LED PLL base lamp 4 pin, 18 watt ( with inbuiled driver)complete all as specified and directed by Engr-in-Charge.

Supply and fix High quility Decorative ultraslim square profile LED light fixture with extruded polycorbonate environment friendly, energy, efficient ready to use pack, 18 Watt, internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and Fixing LED street light fitting 45W 6000K pressure die cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver including GI bracket light grade 25/32 mm and provn of electric supply complete including taking down existing old light fitting any type complete all as specified and directed. Make in C&S/Havells/Philips/Bajaj

Supply & Fixing Exhuast fan ISI mark metal body, AC single phase 230/240 volt, 300mm size, with louvers including, cutting, opening through bricks/ stone wall for fixing in openings, providing , fixing and removing shoring , cleaning and staking brick/ stone, making holes and grounting of suitable size of nuts & bolts for exhaust fan and making good distrubed surface including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to exhaust fan complete all as specified and directed .

M/s RK JOSHI&SONS

aditya construction

NK CONSTRUCTION