Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC 45 38 15 JAGANNADHAPURAM VISAKHAPATNAM 530 016 | VISAKHAPATANAM | ANDHRA PRADESH | 530016 | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹20.1 L+₹4.5 L (28.5%)Rejected-Finance | L2 | Rejected-Finance Not lowest |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
27 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer P Navy Kalinga Visakhapatnam
Garrison Engineer P Navy Kalinga Military Engineer Services INS Kalinga PO Visakhapatnam 531 163
WELCOME MAINTENANCE AND PERIODICAL SERVICES TO CERTAIN BLDGS AT NON TECH AREA AT INS KALINGA AND KARNA UNDER GE (P) NAVY KALINGA
2022_MES_527451_1
GE (P)/N/K/8903 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer P Navy Kalinga Visakhapatnam
class D, a(I)
6 documents required · 6 mandatory
₹500
Garrison Engineer P Navy Kalinga Visakhapatnam
₹44,000
Yes
12 Aug 2022
30 May 2022
29 Jun 2022
30 May 2022
27 Jun 2022
13 Jun 2022
Amount
Demolition of roof projections/drops, chajja drops and other thin RCC sections of width 10-20cm and thickness 8-10cm including cutting the reinforcement edges and finishing the disturbed surfaces with ave. 5mm thick CM 1:3 and three coats of white wash on ceilings etc. complete all as specified and as directed by the Engineer-in-Charge.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles portions ordered to be dismantled complete all as specified and as directed by the Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.
Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by the Engineer-in-Charge.
Taking down shutters of any description n. exc. 1 Sq.m. each complete all as specified and as directed by the Engineer-in-Charge.
Taking down shutters of any description exc. 1 Sq.m. but n. exc. 2 Sq.m. each complete all as specified and as directed by the Engineer-in-Charge.
Taking down shutters of any description exc. 1 Sq.m. but n. exc. 2 Sq.m. each and refixing in the same opening complete all as specified and as directed by the Engineer-in-Charge.
Resecuring or easing and adjusting without taking down shutters of any description n. exc. 1 Sq.m. each complete all as specified and as directed by the Engineer-in-Charge.
Resecuring or easing and adjusting without taking down shutters of any description exc. 1 Sq.m. but n. exc. 2 Sq.m. each complete all as specified and as directed by the Engineer-in-Charge.
M&L for brickwork with fly ash bricks, straight or curved on plan n. exc. 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.
S&F second class hard wood of 30 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge.
S&F second class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick teak wood beading all round complete all as specified and as directed by the Engineer-in-Charge.
S&F 125mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, 125mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed by the Engineer-in-Charge.
S&F 75mm size stainless steel butt hinges complete all as specified and as directed by the Engineer-in-Charge.
S&F 200mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, 125mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm size aluminium alloy barrel tower bolts complete all as specified and as directed by the Engineer-in-Charge.
S&F 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs 300mm, ordinary brass rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by the Engineer-in-Charge.
S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs XPM aluminium alloy wire cloth, 0.45mm nominal dia. of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by the Engineer-in-Charge.
S&F fancy type stainless steel knobs for fixing curtain rod complete all as specified and as directed by the Engineer-in-Charge.
M & L for fixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as directed.
M&L for non skid/matt finish ceramic tiles 7mm to 8 mm thick area of each tile exc. 0.18 Sq.m. but n. exc. 0.38 Sq.m. , in floors etc.set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge.
M&L for non skid/matt finish ceramic tiles 7 to 8mm thick of size 600 x 100 mm, in vertical surface like skirtings dado etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over backing coat of mortar 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified and as directed by the Engineer-in-Charge.
S&F glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match joint free over rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.
M&L for vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles n. exc. 0.36 Sq.m., in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thick in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.
M&L for vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles n. exc. 0.36 Sq.m., in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed by the Engineer-in-Charge.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed or bedding layer of CM 1:4, 20 mm thick complete all as specified and as directed by the Engineer-in-Charge.
M&L for rendering 10mm thick with CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M&L for rendering 15mm thick with CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old treated surfaces of walls and applying one coat of white wash complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old treated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old treated surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old treated surfaces of walls and applying one coat of plastic emulsion complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old treated surfaces of external walls and applying one coat of cement based paint complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over one coat of primer complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old treated surfaces and applying one coat of weather proof exterior emulsion on external surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.
M&L for complete removal of the existing treatment on the wall surfaces and applying two coats of weather proof exterior emulsion over one coat of primer complete all as specified and as directed by the Engineer-in-Charge.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old painted wood and wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old painted steel and Iron surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, bib taps 15mm dia. fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F two way bib cock 15mm dia. chromium plated, fancy type complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, 15mm dia. chromium plated angle stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, 15mm dia. chromium plated pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F of 40/50mm dia. PVC waste pipes for WHB/sink fixed to walls including fittings and connecting to multiple floor trap complete all as specified and as directed by the Engineer-in-Charge.
S&F grating doom 125mm dia. with waste hole of PTMT (Min weight 40 gms) complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, 750 Litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked hoisted and fixed in position complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs, 1000 Litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked hoisted and fixed in position complete all as specified and as directed by the Engineer-in-Charge.
Taking down existing roof treatment including plaster etc complete all as specified and as directed.
M&L for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed.
M&L for 15mm thick screed bed on concrete surface in cement mortar 1:3 with water proofing compound before carrying out water proofing treatment over roof slab. Note: WPC will be measured and paid separately as supply only
M & L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric(wt. not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and applying a coat of solar reflective bituminous aluminium paint.
Supply only Integral Water Proofing Compound (ISI marked) of approved make complete all as specified and as directed.
Supply only ' D' helical wire spring 450 mm long 'O' gauge, complete all as specified.
M&L for 05 mm thick rendering on concrete surfaces of ceiling in cement mortar 1:3 complete all as specified and directed
M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed by the Engineer-in-Charge.
M & L for Post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors
S & F Solid PVC Door Frame of size 100mm x 60mm made out of 5mm WOOD GRAIN printed PVC sheet used instead of plain colour PVC sheet ans edges will be painted to match with printed sheet, reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside Stiles and Rails and decorative PVC beading of 10mm x 10mm (90*) used instead of exposed portion of PVC sheet beading and the panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F 100 mm dia cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) complete all as specified and directed by the Engineer-in-Charge.
S&F anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges, suitable handle (1 No.) complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.
M & L for taking down aluminium door shutter exc 1.5 Sqm but not exc 4 Sqm and refixing in the same opening after repairs/refitting the door shutter including all screws and cleats including fixing of 8mm long bolt at the top and bottom complete all as specified and as directed.
SRI SAI KRISHNA ENGINEERING WORKS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .