REPAIR MAINTAINANCE TO INTERNAL WIRING, LIGHT FITTING, IMPROVEMENT OF BUILDINGS INFRASTRUCTURE FOR ELECTRIC SUPPLY INSTALLATION UNDER GE DEHU ROAD.

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings, MCB DBs,outlet boxes etc.removing material for taking credit and making good disturbed surfaces with match colour of walls, floors, ceilings etc all as specified.

M&L for casing capping/PVC conduit point wiring suitable for One Light/Bell/Fan point controlled by one switch complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC casing capping of size heavy grade ISI marked including necessary casing capping with accessories, heavy duty PVC terminal including 1.5 mm PVC insulated FRLS copper conductor as in continious earth wire.

All as per item No-2 here in before but one 3 pin 5 Amps socket outlet on independent board

All as per item No-2 here in before but one 3 pin 5 Amps socket outlet on same board

All as per item No-2 here in before but above but with 4 Sqmm wire for 15 Amp socket outlet on independent board.

Supply Modular switch 1 way 6A,1 modul, 220 V. Make :Belno, Legrand,Crabtree.

Supply Modular socket 6A-2/3 pin combined 2 modulas flush type 220 V Make : Benlo,Legrand,Crabtree.

Supply Modular multi socket 6A/16A-2/3 pin combined 2 moduls flush type 220 V .Make :Benlo,Legrand,Crabtree.

Supply Modular switch 15Ampa flush type 220 V .Make : Benlo,Legrand,Crabtree.

Supply for repairing Ceiling rose, surface bakelite, 65mm x 50mm two to three terminals.Make :Benlo,Legrand,Crabtree.

Supply Modular fan regulator stepped type Electronics regulator flush type on the existing 120 watts,220 volt, 2 moduls and connecting complete all as specified and directed .Make : Benlo,Legrand,Crabtree.

Supply Modular white cover plate with frame suitable for 4 modul.Make:Benlo,Legrand,

Supply Modular white cover plate with frame suitable for 6 Modul.Make:Benlo,Legrand,

Supply Modular white cover plate with frame suitable for 8 modul.Make:Benlo,Legrand,Crabtree.

Supply Modular Metal flush box suitable for 4 modul. Make:Benlo,Legrand,Crabtree.

Supply Modular Metal flush box suitable for 6 modul. Make:Benlo,Legrand,Crabtree.

Supply Modular Metal flush box suitable for 8 modul Make:Benlo,Legrand,Crabtree.

Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheet cover of size 100 mmx 100mm and 50mm deep.

Supply PVC rectangular block for mounting,switches,sockets ,fan regulator etc with 3mm thick plastick laminated sheetbcover of size 175 mmx 100 mm and 50mm deep.

Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheetbcover of size 200 mmx 150mm and 50mm deep.

Taking down unserviceable sub main wiring of any size complete and making good disturbed surface with match colour of walls/floors etc complete as specified.

M & L submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 2.5 sqmm (nominal area) drawing through PVC capping casing/PVC conduit and 2.5 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly(Note : Cutting chases for counduit and sinking"s for boxes and makeing good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items).

All as per item No-22 herein before but of size 2X 4 sq mm and 1X4 sqmm

Taking down unserviceable Distribution board and supply and fixing distribution board , SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 8 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed.,Make : Bentec/Havells / Legrand

Taking down unserviceable Distribution board and supply and fixing distribution board , SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 6 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Bentec/Havells / Legrand

Supply and fixing MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / Legrand

Supply and fixing MCB SPN 40 Amps 240 volts 50 HZ having '10 KA complete.Make : Bentec/Havells / L&T/Legrand

Supply and fixing MCB DP 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / L&T/Legrand

Supply and fixing MCB TPN 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / Legrand

Supply and fixing MCCB ,TPN,415 Volt AC 50HZ 100 Amps , adjustable braking capacity 10KA complete all as directed.Make : Bentec/Havells / Legrand

Supply and fixing MCCB ,TPN,415 Volt AC 50HZ 160 Amps , adjustable braking capacity 25KA complete all as directed.Make : Bentec/Havells / Legrand

Supply and fixing MCCB ,TPN,415 Volt AC 50HZ 200 Amps , adjustable braking capacity 25KA complete all as directed.Make : Bentec/Havells / Legrand

Supply and fixing MCCB ,TPN,415 Volt AC 50HZ 250 Amps , adjustable braking capacity 25KA complete all as directed.Make : Bentec/Havells / Legrand

Supply and fixing Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours..Make:-Havells.Benlo,Crompton

Supply and fixing Industrial 40 W LED we’ll glass with housing made cast aluminium opaque/transprent polymer diffiser for optimum light output IP-65 lumen efficacy >60 lm/watt,SPD>10 KV. Make:-Havells.Benlo,Crompton

Taking out LT Cable of any size(10 sqmm 2/4 core to 240 sqmm 3.5 core) for reuse or under Schedule of credit to contractor. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

Supply ,laying ,commossionong,testing in repair UG cable 70 Sq mm x 3.5 core ,XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter all as directed- Make :- Gloster/ Polycab/Vishal.

All as per item-37 here in before but size of cable 10 Sqmm x 2 Core all as directed.

All as per item no-37 here in before but size of cable 10 Sqmm x 4 Core all as directed.

All as per item no-37 here in before but size of cable 16 Sqmm x 4 Core all as directed.

M & L in repair HDPE DWC pipe 40 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

Excavation in trenches Soft / loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed .

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

Taking down unserviceable GI pipe street light pole ,supply and installed hot dip Galvanized octagonal pole of height 7 mtr, top70 mm, and bottom 135 mm ,Top 70 mm made with 3mm thick Mounting base plate 250x Plate,fix on PCC foundation with foundation bolt 700mm long 250x12 mm with four nos foundation bolts with washer of size 16mm dia and 600mm long mm bolt,including street light bracket single arm minimum expoe lenght 1.5 mtrr length from poles withe pole cape complete as per manufacturer design.(PCC for foundation measured and paid in respected sch a"A" items)

S&F in repair Smart Integrated Solar All In One with > 140Lum/W, 09 Watt power Rating, MPPT Charge Controller, Tiltable LED panel,Including Lithinim battery Adjustable AIO mounting angle, MonoCrystalline Solar Panel, PIR motion Sensor, easy to install. MAKE :- Crompton,Havells,Bajaj,Jaquar

Material and labour for repairing outdoor main control feeder pillar box cannopy type with IP-55 protection,in cluding fabricated the worn portion of body, angle, hing ,taking down the control system and refixing , painting the external and internal surface with match the existing paint complet all as directed. Note: (a) MCCB/MCB will measure in respective items of schele "A".

M & L in repairs for earthing with galvanised steel earth plate electrode 60cmx60cmx6.3mm burried directly in ground earth pit not less than 2.25 m deep below normal ground level with top edge of the plate vertically to depth of not less than 1.2m below ground level connected to and including GI strip of size 25 x 4 mm as earthing lead welded with earth electrode (excluding GI protection pipe) and connecting to equipments by means of earthing lead connecting to equipments by means of GI bolts & nuts etc. with provision of char-coal and salt etc. all as per electrical plate No. 3 of SSR Part I, 2009 including RCC cover and MS angle iron frame watering arrangement with GI pipe 20mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete all as specified and directed by Engr-in-Charge. Note: Rate quoted deemed to be including excavation by compressor M/C for Soft disintegrated rock to required depth.

Taking down the unserviceable light fitting any type, supply and fixing Flood light,Supply and fixing Inverter Flood Light,PDC housing and IP-66 with battery backup 60 watt as per Halonix part No-INVERTER HLFD-ML30-60-CWL-INV-RTC-R all as directed. make:Halonix,Benlo,Havells, Philips

Taking down the unserviceable light fitting any type, supply and fixing street light,Supply and fixing Inverter street Light,PDC housing and IP-66 with battery backup 30 watt as per Halonix part No-LED SL 30W HLSLD-ML04-30-CWL-INV-RTC-R all as directed. make:Halonix,Benlo,Havells, Philips

S&F earth continuity conductor or main earthing lead of size 32x6 mm GI strip fixed to wall drawn in conduit/pipe or any other indicated situation for loop earthing etc. incl removal of old as required all as specified and directed

Taking down unserviceable GI pipe from trenches/floor/roof and Supply and laying GI pipe medium grade of size 50mm including necessary fitting all as directed

Supply and fixing Air termination, single pointed aluminium rod 12mm dia and 300mm long

Demolition of brick or stone/boulder masnory, built in cement mortar.

M & L for brickworks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M&L full body Vitrified coloured Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

M&L full body Vitrified coloured Ceramic tiles of light colour shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic couloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thick of approved colour as in verticle surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 30 mm thick sand cushion complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc 4Sqm each complete all as specified and as directed

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed

S & F Powder coated sluminium (minium thickness of powder coating 50 micron) work for doors chawkhat, partition etc with extruded built up standard tubular section/appropriate Z section of approved make conforming to IS-733 and IS:1285, fixing with dash fasterners of required dia and size including necessary filling up th gaps at junctions i.e. at top bottom and sides with required EPDM/rubber/neoprene gasket

S & F of anodised aluminium powder coated door shutters aluminum section weighing 0.55 kg/m incl necessary joining cleats, ruber neoprene packing handles 02 Nos in each door hinges anodised aluminium snap beading screws etc. complete all as specified and directed

S & F solid PVC wall lining consisting of 5mm thk plain colour PVC sheet inclusive of solvent cement and fixing at site on alluminium frame as specified

S & F sheet glass 5.5mm thk ordinary quality and glazing wth oil putty in square n exc 0.5 Sqm

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S & F tree track sliding window including frame with two shutters with 4mm thk tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia and 1.18mm width aperrture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of JINDALor of equivalant make complete all as specified and directed by Engr-in-Charge (a) Bottom frame - 20620, (b) Top frame & Vertical - 20621 (c) Handle (Side) - 20606, (d) Shutter inter lock - 20724, (e) Shutter top and bottom - 20844, (f) Glazing clips - 19352. Note : Cost dof tinted glass and wire cloth shall be included in the quoted rate of the item

S&F aluminium powder coated DECOGRILLE 7.5mm width and 6mm thick of design DG-102 having wt 3.131 kg/sqm fixed to and including powder coated aluminium U type frame with CP brass/Stainless steel screws @ 200c/c, including cutting the grill to proper opening size for fixing & operation of handles and fixing & operation of handles and fixing powder coated aluminium section around the opening all as per requirement and direction of Engr-in-charge.

S&F 100 mm Butt hinges, stainless steel with mild steel hinge pin, bright polished and fixed, typeB-11

S&F 100mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

S&F in repairs 25 mm dia Stainless steel curtain rod with side knobs and fancy type brackets of stainless steel of 25mm dia in pair of required size all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S& F in any height and in any position 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

M&L for preparation of surfaces and applying applying two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer.

Taking down cement plaster on brick walls or concrete surface including raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for 5mm thick rendering in cement mortar in 1:3 to concrete surfaces as in ceiling in patches, finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of white wash to new plastered surfaces of walls including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

M&L two coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of cement base paint on new plastered surfaces of walls including prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper on new plastered surfaces of walls including 3mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with cement primer complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed.

S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.

All as per item No. 99 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed.

M&L for MS work as in wind tie or any other work incl cutting , drilling holes etc.

Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

M & L for false ceiling with 10mm thk of panel size 600 x 600 mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joinsts placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specifed and as directed

Dismantling fencing wire mesh , any tpe complete all as specified and directed by Engineer-in-Charge

Dismantling post, struts , (wood , steel or Rcc) any section incl. taking out embeded portion in concrete and making disturbed portion good complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard dense soil complete all as specified and as directed by Engineer-in-Charge

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and as directed by Engineer-in-Charge.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

S&F flat iron of size 40x6mm as in columns as in clamps, holdfasts wall ties etc conforing to Fe-290 Gde-165 complete.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank complete all as specified and as directed by Engineer-in-Charge.

Supply only chain link MS galvanised fencing incl line wire mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified and as directed by Engineer-in-Charge.

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and as directed by Engineer-in-Charge.

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Dismantling MS works of any Desc. Not otherwise provided for all as specified and as directed by Engineer-in-Charge.

S & F framed work as in doors or gates of angle or other section with gusset plates, rail, braces, etc, complete, drilled for fixing of steel sheeting or other concering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door gfitting (exclusive of steel sheeting or other covering , running rails and guides) and hanging , also fastening and fixing complete confirming to Fe-410 W (Gde E-250) complete all as specified and as directed by Engineer-in-Charge

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M & L for providing reinforced cement concrete M-15 nominal mix, using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed by Engr-in-Charge.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed by Engr-in-Charge.

M & L for Fe 500D TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Ditto as per item No 119 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.

M&L for 20mm tk Granite (of any type) work (table rubbed and polished) in pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

Taking down rolling shutter including all fittings and fixturs (Channels, cover hood, bearing , anchor rod and shutter)

S & F of steel rolling shutterrs 1.00mm thk of lath, gear operated type with bevel gear box and crank handle, as specified including top cover anchoring rodm hasp and staples and one shop coat of primer erected in position in position as indicated complete

Supply only in repair 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only in repair 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

Supply only in repair 32mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.

s & F 15 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

S & F 20 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

Supply only 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and directed. Specification of flushing cistern shall be as per IS 7231-1994.

S & F in repairs Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs. Note:wash basin shall conform to IS 2556(part-4)-2004.

KARPE AND SONS CONSTRUCTION (BID ID -3152157)

S Y Itkar Construction and Company (BID ID -3153147)

DINESH CONSTRUTION (BID ID -3152564)

RAMESH PATIL (BID ID -3153070)

SLB Enterprises (BID ID -3152977)