S0108/22 Renovation of Existing Modern Slaughter House Electrification under annual plan 2021-2022 at Tirur Municipality

Amount

1.Electrical

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

Supply and providing heavy duty 'A' section neoprene gasket in the panel board Supply and providing 'U' section PVC beeding in the panel board

Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Supply and providing copper earth bus in the panel board

Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 30 KA 4 Pole

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 Amp, 36 KA

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250 Amp, 50 KA

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

Providing and fixing Load Manager in the propsed MSB and giving connections etc as required

Providing and fixing AMF Relay in the propsed MSB and giving connections etc as required

Providing and fixing Synchronizig Relay iin the propsed MSB and giving connections etc as required

Providing and fixing Spreader/terminaladpted terminal for 4 pole MCCB of rating 32 A ( 8Pcs) in the propsed MSB and giving connections etc as required

Providing and fixing Spreader/terminaladpted terminal for 4 pole MCCB of rating 63 A ( 8Pcs) in the propsed MSB and giving connections etc as required

Providing and fixing Spreader/terminaladpted terminal for 4 pole MCCB of rating 100 A ( 8Pcs) in the propsed MSB and giving connections etc as required

Providing and fixing Spreader/terminaladpted terminal for 4 pole MCCB of rating 160 A ( 8Pcs) in the propsed MSB and giving connections etc as required

Providing and fixing Spreader/terminaladpted terminal for 4 pole MCCB of rating 250A9 8Pcs) in the propsed MSB and giving connections etc as required

Providing and fixing 145 A, 3 pole power Contactors (For 80 HP motor), AC 3 rating at 415 V, with AC Coil, Auxiliary contacts, 2 NO/2NC in the propsed MSB and giving connections etc as required.

Providing and fixing 70 A, 3 pole power Contactors (For 54 HP motor), AC 3 rating at 415 V, with AC Coil Auxiliary contacts, 1 NO/INC in the propsed MSB and giving connections etc as required.

Providing and fixing 50 A, 3 pole power Contactors (For 34 HP motor), AC 3 rating at 415 V, with AC Coil, Auxiliary contacts, 1 NO/INC in the propsed MSB and giving connections etc as required.

Supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1, LED Display

supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

supply and providing 100/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT

Supply and providing 200/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT

MCCB Accessories - Supply and fixing one number earth fault Relay up to 250A to 400A with CBCT.

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

Supply and providing 8 stage, 440/ 110 V, 5 A/ 1 A intelligent power factor controller

Supply & fixing the3 Pole Capacitor duty contactors for switching capacitor banks 4 - 7 kVAR with AC Coil,

Supply, conveyance installation testing and commissioning of 40 kVA Customized Control System (AMF)

GENERATOR SET - Supply, conveyance installation testing and commissioning of 40kVA/32KW SILENT Diesel Generating Set CPCB II approved, in acoustic enclosure comprising of "Cummins" Engine Model X3.6TAA-G1, Radiator Cooled developing 53BHP at 1500RPM, complete with standard accessories and coupled to ‘’STAMFORD’’ Alternator rated at 32KW/40kVA, 415 Volts, mounted on a Channel Iron Base Frame complete with Fuel Tank of 100 Ltrs capacity with Standard Manual Control System and 1Number 12 V Batteries

Supply, conveyance installation testing and commissioning of 20 kVA 3 Phase Customized Control System (AMF)

Supply, conveyance installation testing and commissioning of 20kVA/16KW Three Phase SILENT Diesel Generating CPCB II approved, in acoustic enclosure comprising of “CUMMINS” Engine Model X2.7T-G1, Radiator Cooled, 3Cylinders,developing 32BHP at 1500RPM, complete with standard accessories and coupled to STAMFORD Alternator rated at 16KW/20kVA, 415V, mounted on a Channel Iron Base Frame complete with Fuel Tank of 85 Ltrs, capacity With Standard Manual Control System and 1Number 12 V Batteries

Supply and providing the following size of B class MS pipe conforming to relevant IS specifications complete with heavy guage specials such as bends, flanges etc welded and fixed at appropriate locations, providing cork sheet in between the flanges at the joints, bolting the flanges together, painting the pipe, flange etc with 2 coats of heat resistant paint suitable for outdoor applications, fixing the pipe firmly with fabricated structure/wall/any other mechanical support etc as required.- 100 mm dia B class MS pipe as extended exhaust pipe.

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 10 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 150 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 35 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 25 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 70 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 150 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 150 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 50/38 mm or nearest size

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 90/75 mm or nearest size

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 120/102.5 mm or nearest size

Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)

Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.50 mm dia. G.I. pipe (medium class)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.16 sq mm

Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.35 sq mm

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator.8 way, Double door

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required.6 way (8+18) - three phase double cover (IP 42/43)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required.4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required.6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 6A to 63A amps 240 volts "C" curveSP/ DP MCB complete with connections, testing and commissioning as per site requirment etc. as required

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

S & F Motor starters of the following ratings.- Three phase DOL starters for 0.25HP to 7.5 HP motor

S & F Motor starters of the following ratings Fully automatic star delta starter for 15HP motor

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and Providing and fixing 25 mm X 3 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, Washer, excavation, and refilling etc as required

Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

Supply, providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.3.15 mm copper conductor ( 10 SWG)

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run).25 x 3 mm GI strip

Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength

Supply and providing SMC chequered plate of the following thickness including cutting, fixing with the existing frame-work etc. as required for the cable trench covering 8mm thickeness

Supply and fixing Danger notice board of size, 125 x 75 mm

Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of redoxide and written with white paint 'FIRE', filled with fine sand, mounted on existing MS angle frame work / wall bracket etc. as required.

Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.

Painting letters or figures of the 2.5 cm, 4 cm or 5 cm height sizes with enamel paint as identification mark to SB, DB, Panel board as required

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 4.5 metre and upto 6.5 metre

Supply, conveyance installation testing and commissioning of Fabricating, supplying and erection of 6 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 180kmph for 6 Mtrs pole having dimensions bottom 135mm, top 70mm with 3mm thick, 25mmx225x16mm base plate and 4Nos of 20x600mm long J bolts along with the plate and the pole shall be galvanized not less than 65 microns etc.

Supply Conveyance, installation, testing and commissioning of 70W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

Supply, Erection, Testing and Commissioing of 3 Phase, 4 wire, 110 V (L-L), -/1 A CT or -/5A CT, accuracy class 0.2, TOD meterr with terminal block and 20A fuse with HRC Link/SPMCB complete

Supply, conveyance, Installation, testing and commissioning of out door HT metering cubicle with LBS IS 9920 , Load Breaking, Fault Making type, Voltage 11 kV,3,50 Hz., 630 A 6 Rated short circuit withstand current 26.3 kA/ rated current, with Operating Handle Mechanical Trip push button, Electrical Trip push button, 230 V AC Trip Coil VoltageON / OFF Indicator, Earth SwitchBetween SFU & Earth switch inter lock, 3 NOS.HRC fuse link, Space heater & Thermostat, Separate chamber for CT, PT, TOD Meter 1 setTest Terminal Block with fuseCurrent Transformer3 Nos.( -/5 A, 10VA, Class 0.2S), Potential ransformer1 No. (11kV/110 V,20 VA, Class 0.2) Control Wiring with appropriate colors,, Provision for receiving incoming and outgoing cableThrough bottom entry, Provision for TOD Meter, provision forKSEB sealing provision provided in the enclosure should be Powder Coated CRCA sheet 3Nos CT and 1No PT with 0.2 S sencitivity with provision for fixing TOD as required

Supply, conveyance, Installation, testing and commissioning of 100 KVA 100 KVA Cast Resin Transformer- Outdoor comprising of HT panel IS 2026/IS 11171 Standards, /100 Normal continuous Rating (KVA), Voltage Ratio 11 kV/433 V, Rated Frequency 50 Hz, Number of Phases 3, Type of CoolingANAN(Air Natural, Vector GroupDyn 11, Connections ( HV / LV)Delta / Star, Type of Tap changerOff- Circuit Tap Links, Tappings on HV side+5% to -5% in steps of 2.5%, Class of insulation Class F, Lamination CRGO (M-4 Grade), Reference Ambient Temperature (M-4 Grade) 14 Reference Ambient Temperature, 50°C, Temperature rise of windings above ambient 90°CInsulation level a) Impulse withstand voltage (HV) 75 kV ( Peak), b) Power frequency withstand voltage (HV/LV) 28 kV (rms) / 3 kV (rms)Terminal Arrangement (HV/ LV) Provision with connecting LBS Panel / Cable Box, Type of Installation with connecting LBS Panel / Cable Box 18 Type of InstallationFittings Lifting lugs Temperature Indicator, Rating and Diagram Plate,Earthing Terminals, Enclosure – IP 54

Supply, laying and clamping of 1 no. 11 KV grade XLPE cable of the following sizes using clamps fabricated from 20 x 3 mm MS flat, spacing of clamps not exceeding 60cms, making good the damages, colour washing etc. as required. - 3 core 150 sq mm

Supply & laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required 3C 150 sq. mm.

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:120 sq. mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :120 sq. mm

Copying charges of Electrical/fire Drawing per A3 sheet additional copies

Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

Amount to be remitted to KSEB for obtaining Power Allocation and enegization based on demand Notice Issued from KSEB (actual amount will be reimbursed on production of will be reimbursed on production of the original receipts)

Fee to be paid to KSELB towards scrutiny & inspection , meter testing and submitting and getting approval, arranging inspection from KSEB, obtaining power allocation & permanent power connection, approval etc. and commissioning of the proposed DG set. All statutory payments etc (actual amount will be reimbursed on production of will be reimbursed on production of the original receipts)

PRABHA ENTERPRISES

Sajju T

Bidder Name

Sajju T

PRABHA ENTERPRISES

S A Engineering works