Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST BIDDER | |
| 2 | L2₹48.3 L+₹40,661.95 (0.85%)Rejected-AOC 106 1 RAJA RAMMOHAN SARANI KOLKATA 700 009 | KOLKATA | WEST BENGAL | 700009 | L2 | Rejected-AOC OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹49.1 L+₹1.2 L (2.56%)Rejected-AOC 11B NUTANGRAM ROAD SHYAMNAGAR DT 24 PARGANAS NORTH WEST BENGAL 743127 | NORTH 24 PARGANAS | NORTH 24 PARGANAS | WEST BENGAL | 743127 | L3 | Rejected-AOC OTHER THAN THE LOWEST BIDDER | |
| 4 | L4₹49.2 L+₹1.3 L (2.66%)Rejected-AOC 106 1 RAJA RAMMOHAN SARANI KOLKATA 700 009 | KOLKATA | WEST BENGAL | 700009 | L4 | Rejected-AOC OTHER THAN THE LOWEST BIDDER | |
| 5 | Rejected-Technical GOALAPARA MONIRAMPUR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 WB | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | - | Rejected-Technical NOT ADMITTED |
Tender Value
₹57.5 L
EMD Value
₹1.1 L
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(S) BARRACKPORE
Commander Works Engineers (Sub) Military Engineer Services PO- Barrackpore Dist- 24 Pgns (N) Kolkata- 700120 (W.B)
SPL REPAIRS TO JCOs and ORs MD ACCN BLDG NO. W1, W2 and W-3 OF BI LINES UNDER GE BARRACKPORE
2022_MES_530366_1
CWE/BKP/09 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
180 days
GE BARRACKPORE
As per NIT
6 documents required · 6 mandatory
₹1,000
GE BARRACKPORE
₹1.1 L
Yes
28 Sept 2022
11 Jun 2022
20 Jul 2022
11 Jun 2022
19 Jul 2022
26 Jun 2022
Amount
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.
Dismantling framed work timber scantlings 40 sq.cm and over in section, in any position all as directed.
All as per Srl Item No. 2 here-in-before but as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section all as directed.
M&L 2nd class hard-wood clean sawn timber framed and fixed as in scantlings complete all as specified and directed.
M&L for 2nd class hard wood of sectional area exc. 13 & n.exc 25 Sq cm plain fillets square,rectangular or triangular in section, clean sawn, secured with nails or bands complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thiuck of anycolour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F in repairs 4 mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber framework with nails complete all as specified and directed.
S&F 2nd class hard wood plain fillets square, rectangular or triangular in section, of sectional area exc 3 & n.exc 6 Sq cm clean sawn, secured with nails or brads complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articlesall as directed.
M&L for Brick work built in cement mortar (1:6) with well burnt subclass 'B' bricks, straight or curved on plan exc 6m mean radius complete all as specified and directed.
M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) as in boundary wall, drain etc. complete all as specified and directed.
Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc. all as directed.
M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:6) and finished even and smooth without using extra cement.
M&L for 20 mm thick rendering in cement mortar (1:4) including WPC on brick work or concrete surface as in wall including finishing the surfaces even and fair complete all as specified and directed. (Note : WPC will be measured and paid separately).
Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each all as directed.
Taking down chowkats with shutters (without taking down of shutter from the frames)n. exc 1.50 Sqm each all as directed.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each all as directed.
Taking down shutter of any description n exc 1sqm each all as directed.
Refixing Shutter of any description exc 1 sqm but n exc 2 sqm each all as directed.
Refixing Shutter of any description n exc1 sqm each all as directed.
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. Note: Supplying and fixing in the frame at site as specified in drawing of SSR pt-I.
S&F 2nd class hard wood plain solid, straight chowkats and frames wrought,frame rebated on the solid,rounded or chamfered,put together with glue pinned at joints,supplied complete all as specified and directed.
S&F for flat iron size 25mmx3mm as in hold fast including tarring or coal tar black paint conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood plain framed partly pannel and partly glazed shutter (As per existing shutter type) with lock rail and panel of 12mm veneered board particle board of exterior grade with commercial veneering on both faces. The size of rail and style as per IS-1003 complete all as specified and directed.
S&F 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass/gangue (with sash bars) edges of forming plain chamfered or rounded fitted with cut and mitred bead for securing glass/ gauged etc size of member of shutter as per Pt-I, Section 8, Clause 8.20 (a) complete all as specified and directed.
S&F 30 mm thick skeliton / glazed shutter factory made open rebated and prepared to received glass gauge etc with sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etcsize of member of shutters as specxified in SSR part - I, section 8, clause 8.24 (a) supplied and fitted to chowkath as specified and as directed.
Dismantling structural steel work including old MS Grills , gates but excluding framed truss etc. all as directed.
Fixing only Framed work such as framed guard bars,Grills,gates and similar work Note: Serviceable item will be obtained from Srl Item No. 30 here-in-before.
S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window complete all as specified and directed.
S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as fixed in repair as old door/window complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality in square n.exc 0.5 sqm in each pane and glazing with oil putty or fixed with beads complete all as specified and directed.
All as per Srl Item No. 34 here-in-before but including hacking out old broken glass
S&F 100 mm long mild steel, cold rolled medium weight butt hinges all as directed.
S&F for 75mm long MS butt hinges, medium weight, cold rolled mild steel and fixed all as specified & directed.
S&F for 50mm long MS butt hinges, medium weight, cold rolled mild steel and fixed all as specified & directed.
S&F 100mm long stain less steel hinges all as specified & directed.
S&F 200 mm aluminum , anodised, barrel tower bolts of extruded section .
S&F 150 mm aluminum Handle Cast type .
S&F for 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 2nd class hardwood small fittins such as brackets of any type, latch and hinge blocks, shapes door and window stops and the like including all necessary labours ; articles n exc. 200 Cucm each complete all as specified and directed.
Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off the premises all as directed.
M&L 25 mm thick PCC 1:2:4, type B-1 using 20mm graded aggregate as in sub base and leveling course complete all as specified and directed.
S&F non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) joint free area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry pointed in coloured cement to match coloured tiles including screed bed or bedding layer of mortar for laying floor finishes 15mm thick in cement mortar 1:4 complete all as specified and directed.
S&F glazed ceramic coloured tiles in vertical surfaces 350X250X6 to 7mm / 450 x 300mm x 6 to 7mm thick set and jointed in neat cement slulrry and pointed in white or colour cement to match coloured tiles including 10mm thick plastering (as backing coat) other than fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.
S&F Machine cut kota stone slab flooring 18-20mm thick as in floor, trade of steps etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish including screed bed or bedding layer of mortar for laying floor finishes 20mm thick in cement mortar 1:6 complete all as specified and directed.
S&F Machine cut kota stone slab flooring 18-20mm thick as in skirting,riser of steps etc over cement plaster laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish including 10mm thick plastering (as backing coat) other than fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe all as directed all as directed.
Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed. Note: Serviceable item will be obtained from Srl Item No. 51 here-in-before.
S&F for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store all as directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) Note: Serviceable item will be obtained from Srl Item No. 54 here-in-before.
S&F 20mm bore GI tubing medium grade with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed.
Taking up or down 25 mm dia steel tubing and connections, including cleaning for refixing or removal to store all as directed.
Refixing old steel tubing of 25 mm bore and connections in new or old position (walls, ceilings, floors etc.) Note: Serviceable item will be obtained from Srl Item No. 57 here-in-before.
S&F 25mm bore GI tubing medium grade with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) all as directed
M&L for 75mm thick PCC type C-2 (1:3:6) using 20mm graded crushed stone aggregate as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement complete all as specified and directed.
All as per Srl Item No. 61 here-in-before but finishing the surface even and fair as in sub floor
M&L coloured chequred cement concrete tile glossy type 30 cm x 30 cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L cement concrete type B-1 1:2:4 ( 20mm graded aggregate) as in edges of chequired tile path to making slope Interlocking surface to GL complete all as specified and directed.
S&F Curtain rod of cromium plated 25 mm dia (heavy) complete all as specified and directed
S&F MS bracket powder coated of best approved quality suitable for fixing 25 mm bore chromium plated (heavy) rod fixed on wall complete all as specified and directed.
Supply only Liquid water proofing compound
M&L for preparing surface of new plastered wall and applying two coats of oil bound distemper over a coat of Avg 3mm thick wall care putty and alkali resistant primer complete all as specified and as directed
M&L for two coats of oil bound distemper on walls over a coat of alkali resistant primer and average 3mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.
M&L for preparing surfaces of new ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparing surfaces of old ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparing surface new plastered and applying two coats of cement base paint over a coat of chalk whitening complete all as specified and directed.
S&F in repairs for 15 mm Bib taps, cast copper alloy fancy type chromium plated half turn with capstan head screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repairs Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle/ Capeston head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.
S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repair 15mm bore n fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
M&L for 75mm PVC(SWR) dia floor trap plain with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4 ) complete all as specified and directed.
Demolition and breaking up drain pipes PVC or AC pipe set in cement mortar for 100mm bore pipe all as directed.
S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls .
All as per Srl Item No. 80 here-in-before but fixed in trenches
S&F for 110 mm bore PVC (SWR) bends any radious complete all as specified and directed.
S&F for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.
S&F 110 mm PVC (SWR) vent COWL complete all as specified and directed.
Dismantling of 75mm bore cast iron/ reinforced concrete drain pipes/ PVC (SWR) pipes, jointed in any type and taking out from wall/ceiling/floor/trenches and any position complete all as directed.
S&F 75 mm bore PVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall with suitable MS/PVC clamp complete all as directed.
All as per Srl Item No. 86 here-in-before but fixed in trenches
S&F for 75mm bore PVC (SWR) bends any radious provided complete all as specified and directed.
S&F for 75mm bore PVC (SWR) bends any radious provided with access door complete all as specified and directed.
M&L for preparation of new wood surface over 10 cm girth or width and apply two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for one coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer after preparation of new wooden surfaces n. exc 10 cm width or girth complete all as specified and directed.
M&L for one coat of synthetic enamel paint after preparation of old painted wooden surfaces n. exc 10 cm width or girth complete all as specified and directed.
M&L for preparation of old steel surface including complete removal of existing treatment over 10cm girth or width and apply two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M/S H.P Singha
MS SHRI B.C. DAS
BHASKAR SUPPLY AGENCY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .