NABARD-RIDF-XXVII- Additional infrastructure facilities to Vellayil Fishing Harbour - Construction of Parking Area

Amount

Appendix 1 - Parking area (DAR)

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

od6032/2021_2022 : Extra for addition of synthetic polyester triangular fibre of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/ Flooring / water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer -in- Charge based on 4.18&amp;lt;br&amp;gt;Details of cost for per bag of 50 kg of cement used in concrete&amp;lt;br&amp;gt;MATERIAL:&amp;lt;br&amp;gt;

od5915/2021_2022 : Providing Wearing coat on flooring by adding extra materials of light quantity of abrasion resistant to confirm IS-1237(like Nito floor hard top) at 3 kg/m2 sprinkled in uniform over the concrete including floating hard and trowelled smooth to get a uniform hard surface and providing wiremesh impression and making necessary grooves for various joints including all cost of material, labour, hire charges etc. complete.(based on Approved data for RKVY - Construction of berthing jetty at Puthiyappa)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Interlocking Around Buildings

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Interlocking

4.11.2 : Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. <br>(ii) Using Gravel mix soil.

4.9 : Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

ARJUN PUTHALATH

biju p v

TECTONICS ENGINEERING PROJECTS

Betterland Builders LLP

sajid pakkada

B&I CONSTRUCTIONS

NOUSHAD C A

Abdulnazir K P

HAFIS MOHAMMED SAHAB

VIJESH

HYDROS

Abdul Hameed NK

C.Anilkumar

NOVEL CONSTRUCTIONS

PMR ENTERPRISES PVT LTD

Rana K Balan

Bidder Name

NOVEL CONSTRUCTIONS

VIJESH

Mohammed Fasil

Abdul Hameed NK

C.Anilkumar

PMR ENTERPRISES PVT LTD

HYDROS

ARJUN PUTHALATH

HAFIS MOHAMMED SAHAB

Abdulnazir K P

Rana K Balan

Betterland Builders LLP

sajid pakkada

NOUSHAD C A

TECTONICS ENGINEERING PROJECTS

biju p v

B&I CONSTRUCTIONS