Notice Inviting e-Tender No. 13/EE(R and B)/NKDA/2026-27

Repairing work Mela Ground

Supplying bubble free float glass of approved make and brand contorming to 1S: 2835-1987 xil) 12mm thick coloured / tinted / smoke glass

Hydraulic door closer of approved quality as per I.S.I, standard fitted and fixed complete. (a) Heavy type (1.S.1. size 3)

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to 1.S. specification (1.S. 230/72) fitted and fixed complete: a.(vii) 150 mm gripx 12 mm dia rod.

Providing and fixing exterior quality Aluminium Composite Panel (ACP)wall cladding on existing AL. /MS frame work with GI brackets, ACP fixed on the existing frame work by foldingthe edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scatfolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge.(Mode of payment is on finished surface area of ACP) (b)4mm thick (0.50mm Al.+3, 0mm LDPE +0.50mm Al. PVDF coating

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. li)4mm thick coloured / tinted / smoke glass

Supplying, Fitting & Fixing Factory made P. V.C. door frame of size 50 mx47 mm with a wal thickness of 5 mm, made out of extruded 5mm, PVC shet mter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15mm M,S, square tube, The two vertical door profles are to be reinforced with 19mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 85/100 mm long M,S. Screws through the frame by using P.V.C fasteners, A minımum of 4 Nos of screws to be proyided for each vertical member and minimum 2 Nos tor horizontal member etc, complete as per Manufacturer's specification and direction ot Engineer-in-Charge

Supplying and laying true to line and level Anti-Skid, FullBody, Homogeneous & Granular finish Vitrified TIles conforming toIS:15622-2006&1S4457-2007 andtesting shall be made in accordance with IS:13630/Non-modularsizesfor tileswithskid resistance>0.5, Mohr's hardness>5.0, Staining resistance: Class-1, WaterAbsorption:E35N/sq.mm in Internal area of building e.g.ToiletBlock, Passage, Corridor, Accessible OpenTerraceetc.set in20 mm sand cement mortar(1:4) and 2mm thick cements lurryatback side of tiles using [email protected]./SgmorusingPolymerisedAdhesive(6mmthick layer applied direct yover finished artificial stone floor/Mosaic etc withoutany backingcourse) laid after applications lurryusing1.75KgofcementperSgm belowmortaronly, joints grouted with admixture of white cement and colouring pigment tomatch with colour of tiles/epoxygrout materials of approved makeas directedand removal of wax coating of top surface of tiles with warmwater and polishing the tiles using soft and dry clothuptomirror finish complete includingthe cost of materials , abour and allother incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge.(White cement, synthetic adhesive and grout material to be supplied by the contractor). a) In Ground Floor: Sizes-300 mmx300mm x10 mm with breaking strength > 1200N

Applying Interior grade Acrylic Primer of approved quality andbrand on plastered or cencrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering inintermediate coatsincluding putty (to be done under specific instruction of Superintending Engineer) ( Two coats) ii Luxury Quality