Construction of Mali Hut at Deo-Brarta Nursery

Amount

Sub Head: Main Building

Cutting in earth work and disposal of excavated earth upto a lead 20 mtr.

Excavation in foundation trenches etc in earth work lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear form the edge of the excavaion and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etcetera , consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work.

Providing and laying cement concrete 1:6:12 (1Cement : 6 Sand : 12 graded stone aggregate 40 mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approve quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 ( 1 cement : 6 sand).

Providing form work ordinary timber planking so as give rough finish i/c centering and shuttring.(seismic bond) on plinth and Lintel level- (a) Beams and lintels.

Providing form work ordinary timber planking so as give rough finish i/c centering and shuttring.(seismic bond) on plinth and Lintel level- (b) Flate Surface.

Providing tor mild steel/ tor steel reinforcement for R.C.C work including bending,binding and placing complete

R.C.C. work 1:2:4 (1cement;2 Sand: and 4 graded stone 20 mm nominal size including curing complete but excluding cost of form work and reinforcement.

Brick work using common burnt clay building bricks with rat trap bond in super structure in cement mortar 1:6 (one cement : six sand) second class bricks ( i) above plinth level upto floor two level .

Half brick masonry in cement mortar 1:4 in super structure i/c curing complete.

Wood work in frames of doors, windows and clcresting windows and other frames wrought framed and fixed in position in Its class deodar wood.

Providing wood work in trusses,purlins, rafters,posts,post plates,wall plates and the like wrought framed, hoisted and fixed in position in 2nd class deodar wood.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm diametre with prepainted limpet and rubber wasshers complete with all accesories as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+back coat of polyster of 5microns over 5 microns primer including fixing with screws prepainted iron J or L hooks,bolts and nuts 6mm dia meter and prepainted G.I limpet and bitumen washers complete with all accesories as reqired as per the direction of Engineer-in-charge.

Providing eaves board 200 mm x 25 mm thick i/c fixing in position complete.

Providing wood work in frames of false ceiling partetion etc. sawn and put up in position.

Providing and fixing wooden plank ceiling (20 mm thick)with planks over lapping each other and jointed with wood srews.

Stone soling under floor property hand packed and consolidation by hand ramming complete

Providing and laying cement concrete 1:6:12 (1Cement : 6 Sand : 12 graded stone aggregate 40mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth.

15 mm thick Cement plaster 1:5 (cement :sand in respective ratio in rough sides of brick stones\concrete walls for plastering upto floor two level finished even and smooth including scaffolding .

Cement concrete flooring 1:2:4 (1Cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40 mm thick.

Providing and fixing MS grill of requird pattern in wooden frames of windows etc. plain grill

Providing and fixing of panelled glazed or panelled glazed shutter for door and windows including black enamelled iron butt hinges with necessary screws 40 mm thick. (1st class deodar wood)

P/f wire gauge shutter using G.M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors &window. Including bright finish/black.

Distempering with dry distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls. Priming coat with distemper primer.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting Ready mixed paint brushing with white lead for priming.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping with white enamel paint.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete-300x16mm

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc complete-( i) 200x10mm

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc complete-( ii) 150x10mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etcetera complete-( i)125mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etcetera complete-(ii) 100mm

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete.

Providing and fixing 100mm bright finished hard drawn hooks and eyes- 100 mm

P/F MS but hinges with necessary screws.

Provding under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) wall rammed and consolidated and grouted with fine sand including preparetion of ground.

Providing plinth protection 50mm thick with cement concrete 1:3:6 (1Cement : 3Sand : 6 graded stone aggregate 20mm nominal size)

Sub Head: Septic Tank

Excavation in foundation trenches etc in earth work lift upto 1.50 mtres stacking the excavated soil not more than 3 metres clear form the edge of the excavation and then returing the stacked soil in 15cm layers, when required into plinths side of foundations etcetera, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work.

Providing and laying cement concrete 1:6:12 ( 1Cement:6 Sand:12 Graded Stone aggregate 40 mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth.

Brick work using common burnt clay building bricks with rattrap bond in super structure in cement mortar 1:6 (one cement : six sand) second class bricks (i) above plinth level upto floor two level.

15 mm thick cement plaster 1:4 (1 cement:4sand in respective ratio in rough sides of brick stones/concrete walls for plastering upto floor two level finished even and smooth including scaffolding.

Providing and laying cement concrete 1:2:4 ( 1Cement:2 Sand:4 Graded Stone aggregate 40 mm nominal size) and curing complete exluding cost of centring and shuttering.

Providing form work of ordinary timber/planking so as to give rough finish i/c centering shuttering and propping etc. complete.

Mild steel reinforcement for RCC work i/c bending and placing in position complete.

RCC work in 1:2:4 (1Cement:2 Sand:4 Graded Stone aggregate 20 mm nominal size) i/c curing complete but exluding the cost of reinforcement and form work.

Boulder/brick pleces gravel filling in soak pit.

Mr. Sohan Lal