Supply, Erection and Commissioning of new 11 kV Overhead line along with 4-pole Structure from Khalsa More to Settling Tank and Intake Well facilities

Amount

Supply, Installation ,Erection & Commissioning of the followig items

Rail Pole 60 kgs per mtr - 13 meter

ACSR Dog conductor (100 sq. mm.) Including 5% sag.

11kv Pole Top Bracket 50x8 mm flat [GALVANIZED]

11 KV Back Clamp for top bracket [GALVANIZED]

11 KV V cross arm (75x 40x 6 mm), 7.14 kg per mtr [GALVANIZED]

11 KV Back Clamp for "V" cross arm [GALVANIZED]

Support Clamp for 11 KV 'V' Cross Arm [GALVANIZED]

11 KV Cross bracing for D P Structure[GALVANIZED]

DP Channel Support clamp (50x6 mm - Galvanized)

11 KV Pin Insulator (Polymer) with Pin Including support for jumper

11 KV Disc. Insulator (Polymer) 45 KN with H/W

11kV 200A, HG Fuse Set

Structure for HG Fuse Set (Galvanized)

11 KV 3 pin type AB switch/Isolator 400 Amp

Structure for 33 & 11 KV Isolator [Galvanized]

11 KV Lightening Arrester (9KV,10KA, ClassII)

Stay set complete (1800x16 mm) with stay wire 7/10 SWG 8 kgs & Guy Insulator

11 KV Angle stay clamp (50 x 10 mm) [GALVANIZED]

P G clamp for 232/150 sq. mm. conductor

Aluminium binding wire 5 sq.mm

GI Wire No. 10 for earthing

11kV Earthing pipe 20 mm 2.5m long

GI Stay Wire No. 7/10

Stone Base Plate for 11KV

Anti-climbing Device(Barbed wire) s x 12 SWG

11 KV Back Clamp for line DP Channel [GALVANIZED]

11 KV D.P Channel support clamp (50x6 mm) (GALVANIZED)

11 KV D.P Channel (100x50x6 mm) 1.3 Meter long (GALVANIZED)

Danger Board 11KV

Providing P.C.C.M -150 in nominal mix(1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of EIC

Design, Supply, Installation, erection, testing and commissioning of 4 pole structure with two sets of incomer and one set of outgoing along with required bracing, cross arm etc for supporting the pin/strain type insulators (polymer), Guy wires as required, GOD, DO fuses (3No) with necessary 10kA lightning arresters, earth switch, Insulators, Jumpers, Anti climbing device, Danger board etc suitable for receiving power from Upstream SS as per enclosed specifications, SLD, CEA guidelines etc including excavation and grouting/coping of poles, painting with primer, paint, earthing as per IE rule, & IS 3043 etc this shall also includes installation of chain link fencing of 2.5 mtr height around HT Yard comprising of 100x50x6 mm MS channels at every 1.8 mtr centres, 65x65x6mm angles, 8 swg GI mesh of 50x50 mm opening, washers, nuts, bolts, locknuts etc & filling the HT yard with well graded crushed stone aggregate varying in size from 20mm to 50mm mixed with clean sand in the ratio 2.5 part of stone aggrgate to 1 part of clean sand having less than 75 micron size, compacting in 30 mm thick layers using vibratory rollers to achieve a unit weight of at least 2.2T/cu.m (IS 10028) as per enclosed specifications, SLD, CEA guidelines etc

Bidder Name

Amount in Words

M/s Surendra Singh

M J ENGINEERING

M J ENGINEERING