EI Works

Amount

E.I. WORK OF OFFICE BUILDING Dismentling the existing panel board, power DB, SPN DB, Distribution Point wiring, cable, wire, etc. and mending good damages to original finish.

S & F 150 A porcelin fuse base & bridge (Havells make) on suitable size 50mmX6mm flat iron chair on wooden plank as required size with necessary nut & bolt. (With extension Fuse)

Supply & Fixing 415 V 100 A TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts, bolts etc. incl. S & F 3 nos. DIN type HRC fuse and necy. connection by 4 x 16 sq.mm copper wire through PVC flexible pipe from existing panel. (Make L & T)

Supplying and fixing 100 A Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc (Make L & T/ Havells )

S/F 415 v, 16-32 A/way, 4 way vertical TPN MCB DB with SS enclosure double door with IP- 42/43 protection with provision for 4 pole MCB as incomer & TPMCB as outgoing ( 'C' curve, 10 KA ) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl.interconnection with suitable size of cu wire & neutral link & provision for earthing attachment. ( make - Legrand) Comprising of the following i) 100 A, 4 Pole MCCB - I No . ii) 63 A TP MCB - 3 Nos. iii) 32 A TP MCB - 1 No. iv)cable entry box - 2 nos

S & F 415V, 16-32A per way, 4 way HTPN MCB DB with SS enclosure double door with IP- 42/43 protection with 63 amp 4 Pole Isolator as incomer & 12 Nos. SPMCB (16A to 32A 'C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of Cu. wire & neutral link & provision for earthing attachment as to G.S. (Make- Legrand / ABB / Seimens)

S & F 250V, 6-10A per way, 2 + 10 way SPN MCB DB with SS enclouser double door with IP- 42/43 protection with 40A DP Isolator as incomer & 10 Nos. SP MCB's ('C' Curve, 10kA) as otgoing concealed in wall after cutting the wall and mending the good damages to original finish incl. Inter connection with suitable size of Cu. wire and neutral link and provision for earthing attachment as to G.S. (Make- Legrand / ABB / Seimens)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175 x 100 x 65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 10 mtr

Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in PVC Polythene pipe concealed in wall with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish

On Board

b) Average run 7.5 mtrs. (Separate Plug )

S & F 250 volt 5 amps 2 nos plug socket with 2 nos piano key type switch (Anchor) on sheet metal box ( 7'' x 4 '') embded in wall incl making necessary connection as required as per GS.

S/F 250v, 5 pin 15 A flush type plug socket with 15A piano key switch (Anchore) on sheet metal box (16 SWG) with bakelite top cover ( Power point)

S/F 250 x 200 x 65 mm size MS composit board comprising of 1 no 250v, 15 A ,5 pin flush type plug socket with switch & 3 nos 250v 5 A 5 pin flush type socket with switch ( All Anchor) 1 no indicator & 1 No fuse concealed in wall incl. necy. Connection as to GS.

Supply & drawing 1.1 KV grade single core stranded 'FR' PVC insulated unsheathed Cu. Wire (approved make) in polythene pipe embeded in wall complete with all accessories incl. cutting the channel and mending good the damages.

i) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

ii) 2 x 4 sq. mm. + 1 x 2.5 sq. mm.

iii)2 x 6 sq.mm+1 x 4 sq.mm

iv) 4 x 16 sq.mm + 2 x10 sq.mm.

Finishing the end of the Wire by crimping method as to G.S.

i) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

ii) 2 x 4 sqmm. + 1 x 2.5 sq.mm.

iii) 2 x 6 sqmm. + 1 x 4 sq.mm.

iv) 4 x 16 sq.mm + 2 x10 sq.mm.

S & F of A.C/DC. superior type call bell on T.W. Board incl.S & F T.W. Board (Make: Anchor - 8320).

Supply & delivery 250 volt. 4 ft. long 20 watt Single LED Tube Light fittings complete with all accessories incl. LED. Tube (PHILIPS MAKE)TMC 501 PI xT with Master LED Tube 18 W 865T81

Supply & delivery 250 volt. 4 ft. long 20 watt double LED Tube Light fittings complete with all accessories incl.2 nos LED. Tube (PHILIPS make)TMC 501 P2xT with Master LED Tube 18 W 865T81

Fixing only single/twin LED Light fittings complete with all accesaries directly on wall or ceiling with M.S clamp As required as per GS.

Supply & fixing of 9 watt L.E.D Lamp on existing battern holder.(Phlips make)

additional 2 Nos. 20mm dia G.I. Conduit (14 SWG) supports and necessary PVC insulated wire and painting etc. as reqd. (a) 2 x 24/0.20 mm flexible copper wire of 1.10 Mtr. Length

Supply & delivery of 1200mm sweep AC ceiling fan (USHA (Stiker)/Crompton(AURA)) without regulator with all accessories

S & F 250 V, 280 watt Step type electronic fan regulator (Anchor) on existing board after cutting the bakelite cover & necessary connection.

Fixing only A.C. Ceiling Fan complete with blades, canopy, fork etc. incl. S & F connection or wire by 2 x 1.5 sq. mm. PVC insulated Cu. Wire (approved make) for down rod upto 30 cm. incl. painting and necy connection as to G.S.

S&Fixing 300mm dia 1400rpm heavy duty exhaust fan [EPC make] with louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. (make:-EPC / CG)

Earthing the installation by 2' (50 mm) G.I. pipe as per G.S.

Loop earthing by No. 4 GI wire from busbar to equipment as to G.S. ( Earth Busbar )

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), with 16 A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & fixing 230 volt OLP3 AC stater with volt amp & time chek.

S & Laying of 2 core 6 sq.mm. PVC/A cable in Embeded in wall for compound light.

S & F compression type cable gland as per G.S. & Finishing the end of the cable by crimping method as to G.S.

i) 2 core 6 sq. mm.

S/F of 80mm dia 1.5 mtr long Mini G.I Pipe Pole (Midium Gauge)incl. painting & S/F base plate in necy holes as per G.S

Providing CC (6:3:1) muffing 600x600x760) mm in size around the pole base complet with 3 mm thick neatly finished cement plaster all sides with 250x250x100) mm 16 SWG GI Loop Box having 4way connector 15A fuse unit etc.accessories.

S/F 40mm dia 1.5 mtr long detacable type single arm bracket as per direction of the E.I.C

S/F 250 Volt 72 watt LED Fittings complete CENTURY LED make Cat No. SPOR072C0807/ PHILIPS / WIPRO

Supply and fixing automatic control box made by 16SWG CR sheet of approximate 450 x 600 x 150 mm fixed by flushed on wall for control of HPSV light with following accessories. A) 32A TP MCB(LEGRAND MAKE 'ç' curve) ……. 1 nos. B) FM-1 Quartz time switch….1 nos C) ML-2 Contactor.............1 nos D) 16/32A SP MCB (LEGRAND MAKE 'ç' curve)........3 nos E) 4 bolt terminal stud.....1 nos F) toggle switch for manual/suto operation. G) nacessary connection by copper wire

E.I WORK OF GIRLS & BOYS HOSTEL INCL. KITCHEN Dismantling the existing panel board, power DB, SPN DB, Distribution Point wiring, cable, wire, etc. and mending good damages to original finish.

Supply & Fixing 415 V 100 A TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts, bolts etc. incl. S & F 3 nos. DIN type HRC fuse and necy. connection by 4 x 16 sq.mm copper wire through PVC flexible pipe from existing panel. (Make L & T)

Supply & Fixing 415 V 63 A TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts, bolts etc. incl. S & F 3 nos. DIN type HRC fuse and necy. connection by 4 x 16 sq.mm copper wire through PVC flexible pipe from existing panel. (Make L & T)

S/F 415 v, 16-32 A/way, 4 way vertical TPN MCB DB with SS enclosure double door with IP- 42/43 protection with provision for 4 pole MCB as incomer & TPMCB as outgoing ( 'C' curve, 10 KA ) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl.interconnection with suitable size of cu wire & neutral link & provision for earthing attachment. ( make - Legrand) Comprising of the following i) 100 A, 4 Pole MCCB - I No . ii) 63 A TP MCB - 3 Nos. iii) 32 A TP MCB - 1 No. iv)cable entry box - 2 nos

S & F 415V, 16-32A per way, 4 way HTPN MCB DB with SS enclosure double door with IP- 42/43 protection with 63 amp 4 Pole Isolator as incomer & 12 Nos. SPMCB (16A to 32A 'C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of Cu. wire & neutral link & provision for earthing attachment as to G.S. (Make- Legrand / ABB / Seimens)

S & F 250V, 6-10A per way, 2 + 10 way SPN MCB DB with SS enclouser double door with IP- 42/43 protection with 40A DP Isolator as incomer & 10 Nos. SP MCB's ('C' Curve, 10kA) as otgoing concealed in wall after cutting the wall and mending the good damages to original finish incl. Inter connection with suitable size of Cu. wire and neutral link and provision for earthing attachment as to G.S. (Make- Legrand / ABB / Seimens)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175 x 100 x 65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in PVC Polythene pipe concealed in wall with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish

On Board

b) Average run 4.5 mtrs. (Separate Plug )

S & F 250 volt 5 amps 2 nos plug socket with 2 nos piano key type switch (Anchor) on sheet metal box ( 7'' x 4 '') embded in wall incl making necessary connection as required as per GS.

S/F 250v, 5 pin 15 A flush type plug socket with 15A piano key switch (Anchore) on sheet metal box (16 SWG) with bakelite top cover ( Power point)

Supply & drawing 1.1 KV grade single core stranded 'FR' PVC insulated unsheathed Cu. Wire (approved make) in polythene pipe embeded in wall complete with all accessories incl. cutting the channel and mending good the damages.

i) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

ii)2 x 6 sq.mm+1 x 4 sq.mm

iii) 4 x 16 sq.mm + 2 x10 sq.mm.

Finishing the end of the Wire by crimping method as to G.S.

i) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

ii) 2 x 6 sqmm. + 1 x 4 sq.mm.

iii) 4 x 16 sq.mm + 2 x10 sq.mm.

S & F of A.C/DC. superior type call bell on T.W. Board incl.S & F T.W. Board (Make: Anchor - 8320).

Supply & delivery 250 volt. 4 ft. long 20 watt Single LED Tube Light fittings complete with all accessories incl. LED. Tube (PHILIPS MAKE)TMC 501 PI xT with Master LED Tube 18 W 865T81

Supply & delivery 250 volt. 4 ft. long 20 watt double LED Tube Light fittings complete with all accessories incl.2 nos LED. Tube (PHILIPS make)TMC 501 P2xT with Master LED Tube 18 W 865T81

Fixing only single/twin LED Light fittings complete with all accesaries directly on wall or ceiling with M.S clamp As required as per GS.

Supply & fixing of 9 watt L.E.D Lamp on existing battern holder.(Phlips make)

additional 2 Nos. 20mm dia G.I. Conduit (14 SWG) supports and necessary PVC insulated wire and painting etc. as reqd. (a) 2 x 24/0.20 mm flexible copper wire of 1.10 Mtr. Length

Supply & delivery of 1200mm sweep AC ceiling fan (USHA (Stiker)/Crompton(AURA)) without regulator with all accessories

S & F 250 V, 280 watt Step type electronic fan regulator (Anchor) on existing board after cutting the bakelite cover & necessary connection.

Fixing only A.C. Ceiling Fan complete with blades, canopy, fork etc. incl. S & F connection or wire by 2 x 1.5 sq. mm. PVC insulated Cu. Wire (approved make) for down rod upto 30 cm. incl. painting and necy connection as to G.S.

S&Fixing 300mm dia 1400rpm heavy duty exhaust fan [EPC make] with louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. (make:-EPC / CG)

Earthing the installation by 2' (50 mm) G.I. pipe as per G.S.

Loop earthing by No. 4 GI wire from busbar to equipment as to G.S. ( Earth Busbar )

S & Laying of 2 core 6 sq.mm. PVC/A cable in Embeded in wall for compound light.

S & F compression type cable gland as per G.S. & Finishing the end of the cable by crimping method as to G.S.

i) 2 core 6 sq. mm.

S/F of 80mm dia 1.5 mtr long Mini G.I Pipe Pole (Midium Gauge)incl. painting & S/F base plate in necy holes as per G.S

Providing CC (6:3:1) muffing 600x600x760) mm in size around the pole base complet with 3 mm thick neatly finished cement plaster all sides with 250x250x100) mm 16 SWG GI Loop Box having 4way connector 15A fuse unit etc.accessories.

S/F 40mm dia 1.5 mtr long detacable type single arm bracket as per direction of the E.I.C

S/F 250 Volt 72 watt LED Fittings complete CENTURY LED make Cat No. SPOR072C0807/ PHILIPS / WIPRO

S/F 250 Volt 45 watt LED Fittings complete CENTURY LED make Cat No. SPOR045C0803 / PHILIPS / WIPRO

Supply and fixing automatic control box made by 16SWG CR sheet of approximate 450 x 600 x 150 mm fixed by flushed on wall for control of HPSV light with following accessories. A) 32A TP MCB(LEGRAND MAKE 'ç' curve) ……. 1 nos. B) FM-1 Quartz time switch….1 nos C) ML-2 Contactor.............1 nos D) 16/32A SP MCB (LEGRAND MAKE 'ç' curve)........3 nos E) 4 bolt terminal stud.....1 nos F) toggle switch for manual/suto operation. G) nacessary connection by copper wire

Supply and fixing automatic control box made by 16SWG CR sheet of approprite size fixed by flushed on wall for control of HPSV light with following accessories. A) 32A DP MCB(LEGRAND MAKE 'ç' curve) ……. 1 nos. B) FM-1 Quartz time switch….1 nos C) Single Pole Contactor.............1 nos D) 16/32A SP MCB (LEGRAND MAKE 'ç' curve)........2 nos E) 4 bolt terminal stud.....1 nos F) toggle switch for manual/suto operation. G) nacessary connection by copper wire

E.I. WORK OF QUARTER S/F 250V 32A DP main switch on angle iron frame on wall incl. earth attachement, painting and mending good the damages.(make- Havells)

Supply & Fixing of 12W LED bulkhead fittings complete set.(cool white and neutral white) CENTURY LED make Cat No. HWAR012W0167 / PHILIPS / WIPRO for garage

S&fixing of step type electronic fan regulator (EME) (Make - Anchor)

S&F 100 A porcelin fuse & bridge HPL (Havells make) on suitable size 50mm x6mm flat iron chair on wall incl. mending good the damages.

S&F 500V 63 A capacity Busbar chember of size (4ft x1.5ft) & 3mm thick having 4 nos suitable size Cu. Ber incl. painting, earthing attachment as per G.S.

S & F 415V 63Amp TPN main switch on angle iron frame on wall incl. necy. Connection earthing attachment as per G.S. (Make - L&T/Havells)

S & F superior type AC/DC call bell on HW block. (Anchor - Make)

Supply & fixing of 9 watt L.E.D Lamp on existing battern holder.(Phlips make)

S&F of 2-0"x1.5 wodden board incl. vernishing & painting by approved paint with one no 32A Kitkat fuse unit with complete set for fixing meter and having locking arrangement as per direction of EIC.

Distribution wiring in 1.1 kv grade 2 x22/0.3( 1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex FR) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/CFL points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar with holes fixed on bakelite/hard rubber insulation over the JB welded chairs incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.(Av. run 6 mtr)

S/F 250V 6pin 15A Flush type plug socket with 15A piano key type switch fixed on 3mm thick bakelite top cover on 4"x4" M.S box incl. earthing attachment incl. S&F M.S box & bakelite top cover and necy connection to G.S.

Supply & Fixing 240V, 2 x 5A 3pin flush type plug socket (Approve make) with 2 x 5A Piano type switch, with plug top on MS type switch board with bakelite top cover plate flushed in wall incl. S&F 5A plug and 5A switch with making necy. connections with PVC Cu wire and earth continuity wire etc. Separate plug (Av run 3 mtr)

Supply and drawing 1.1KV grade single core stranded FR PVC insulated unsheathed Cu. Wire (approve make) in polythene pipe embeded in wall complete with all accessories incl. cutting the channel and mending good the damages.

b) 2x2.5+1x1.5sqmm for pp

c) 2x4+1x2.5sqmm for connection from busbar to meter to DP main

c) 2 x 6 + 1 x 4 sqmm for SPNDB

Finishing the end of the Wire by crimping method as to G.S.

i) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

ii) 2 x 4 sqmm. + 1 x 2.5 sq.mm.

iii) 2 x 6 sq.mm + 1 x 4 sq.mm.

Earthing with 50 mm dia. ISI- Medium GI Pipe 3.64 mm thick x 3.04 Mts. Long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. Long), 13mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S&F 15mm dia. GI Pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.

S/F double door (2 + 6) way SPN MCB distribution board recessed in wall and mending good damages, INCOMING- 240V 40A DP MCB isolator 1no, OUTGOING- 240V 6-16A SP MCB 6 nos. Make-Legrand

Supply of 4ft LED18 watt Single tube light fittings complete with all accessories [PHILIPS make cat no. TMC 501 x 1 x 18 w ].Including S & F 18 watt LED tube[PHILIPS make] Master LED

Only Fixing of Single LED Tube Light fittings on wall / ceiling by bolt & Socket.

Supply & delivery of 1200mm sweep AC ceiling fan (USHA (Stiker)/Crompton(AURA)) without regulator with all accessories

S & F 250 V, 280 watt Step type electronic fan regulator (Anchor) on existing board after cutting the bakelite cover & necessary connection.

Fixing only A.C. Ceiling Fan complete with blades, canopy, fork etc. incl. S & F connection or wire by 2 x 1.5 sq. mm. PVC insulated Cu. Wire (approved make) for down rod upto 30 cm. incl. painting and necy connection as to G.S.

S&Fixing 300mm dia 1400rpm heavy duty exhaust fan [EPC make] with louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. (make:-EPC / CG)

S & Laying of 2 core 6 sq.mm. PVC/A cable in Embeded in wall for compound light.

S & F compression type cable gland as per G.S. & Finishing the end of the cable by crimping method as to G.S.

i) 2 core 6 sq. mm.

S/F of 80mm dia 1.5 mtr long Mini G.I Pipe Pole (Midium Gauge)incl. painting & S/F base plate in necy holes as per G.S

Providing CC (6:3:1) muffing 600x600x760) mm in size around the pole base complet with 3 mm thick neatly finished cement plaster all sides with 250x250x100) mm 16 SWG GI Loop Box having 4way connector 15A fuse unit etc.accessories.

S/F 40mm dia 1.5 mtr long detacable type single arm bracket as per direction of the E.I.C

S/F 250 Volt 72 watt LED Fittings complete CENTURY LED make Cat No. SPOR072C0807/ PHILIPS / WIPRO

S/F 250 Volt 45 watt LED Fittings complete CENTURY LED make Cat No. SPOR045C0803 / PHILIPS / WIPRO

Supply and fixing automatic control box made by 16SWG CR sheet of approprite size fixed by flushed on wall for control of HPSV light with following accessories. A) 32A DP MCB(LEGRAND MAKE 'ç' curve) ……. 1 nos. B) FM-1 Quartz time switch….1 nos C) Single Pole Contactor.............1 nos D) 16/32A SP MCB (LEGRAND MAKE 'ç' curve)........2 nos E) 4 bolt terminal stud.....1 nos F) toggle switch for manual/suto operation. G) nacessary connection by copper wire

COMPOUND LIGHT S &F 8”x6”x4” PVC water proof Hensel - Make loop box (4 mm thick) having 4 way terminal, WITH 1 NO FUSE LINK fixed on pole 3mtr the from the muffing. Mending good the damages.

Supply , Erection and Painting of ST Pole of length upto 9 mtrs. Long with 2 coat of Al. Paints over one coat of R.O. primer after cleaning the pole surface by sand / emary paper etc. for receiving the fresh coat of paint.

S/ Erection of 1.5mtr long 40mm dia detacheble Double Arm Bracket on 80mm dia pole with all require accessories as per direction of E.I.C.

S/ Erection of 1.5mtr long 40mm dia detacheble single Arm Bracket pole with all require accessories as per direction of E.I.C.

S/F medium gauge GI pipe (ISI- M) for PVC/A AI cable protection as to GS. (50mm. Dia)

S &Delivery of the following size 1.1 kv.gr. 2 core 10 sq.mm. PVC/A Al. cable as below (Havells/Gloster / KEI)

a) Surface on wall as per GS.

b) In UG Trench

Finishing the end of Following XLPE/PVC armoured cable by crimping method incl. S &F solder less socket tapes anticorrosive paste and jointing materials

a) 2 core 10 Sqmm (for compound light)

S & F compression type gland complete with brass gland, brass rings & rubber ring for dust & moisture proof entry of XLPE/PVC armored cable as below

a) 2 core 10 Sqmm (for compound light)

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole

S/F 250 Volt 72 watt LED light Fittings complete CENTURY LED make Cat No. SPOR072C0807/ PHILIPS / WIPRO incl. Flat iron frame with suitable size nuts & bolts as requirred

S&drawing 1,1kv grade single core stranded FR PVC insulated unshehed cu wire (approved make) in polythene pipe embedded in wall complete with all accessories incl.

2 x 1.5 sqmm+1 x 1.5sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By ISI-Medium GI pipe For Soft Soil

Supply and fixing automatic control box made by 16SWG CR sheet of approximate 450 x 600 x 150 mm fixed by flushed on wall for control of HPSV light with following accessories. A) 32A TP MCB(LEGRAND MAKE 'ç' curve) ……. 1 nos. B) FM-1 Quartz time switch….1 nos C) ML-2 Contactor.............1 nos D) 16/32A SP MCB (LEGRAND MAKE 'ç' curve)........3 nos E) 4 bolt terminal stud.....1 nos F) toggle switch for manual/suto operation. G) nacessary connection by copper wire

SITC OF 30 KVA DG SET 1) Supply, Installation, Testing & commissioning of 30 KVA Diesel Generator Set capable of developing 154 BHP at 1500 RPM complying with the requirments BS 5514/IS 10002, directly coupled to a AC Generator (given make) capable of developing 30 KVA at 415V, 50Hz, 0.8 PF(lag) suitably meeting the requirments of BS 5000 along with a Power Control Panel to correctly regulate AC Power. The set will complete with the following: A) ENGINE (Make : Cummins/Kirloskar Green) i) Exhaust gas turbo charger with after cools. ii) Redential type exhaust silensor. iii) Air Cleaner with dry replaceable elements. iv) Fuel pump with mechanical Governer(Class A2)- Governing. v) Lube Oil cooler and replacement spin on type Oil filters. vi) Centrifugal Filter for extended lube change intervals for better efficiency. vii)Closed circuit engine cooling with water pump pusher fan & radiator. viii) Safety shut down system for low lube oil pressure & high coolent temparature. ix) 12V Electric starting system. x) 17/19/21/25 Plate Battery (Dry)

B) ALTERNATOR/ AC GENERATOR CAPABLE TO DEVELOP 30 KVA AT 415V, 50 Hz, 0.8 PF(Lag) TRULY MEETING THE REQUIREMENTS OF BS 5000. (Make : Stamford/Kirloskar Green/Cummins) i) Single bearing, self-exited, self-regulated in brushless construction. ii) Automatic Voltage Regulator. iii) Class H insulation for starter and Rotar winding. iv) screen protected, drip proof, continuous duty in accordance with IS specification and v) Output Voltage is regulated per relevant IS Specification.

D) ENCLOSURE. The enclosure must be CPCB approved acoustic enclosure and having following details i) Having nut-bolt type Construction of sheet metal with powder coating along with the arrangement of the canopy panel and doors with its inside lining of FIRE-TREATMENT foam as acoustic materials. Four hinged doors (lockable) are provided to canopy. It has lockable fuel filling arrangement externally along with the arrangement of externally accassable emergency stop botton. ii) NOISE SUPPRESSOR (SILENCER) Absorption type non-resistance silencer insulated from outside with glass wool are provided to suppress exhaust noise from the engine. iii) WIRING AND LIGHT P.V.C. copper wire conceled in flexible Conduit with flurescent tube light/ bulb with MCB will be provided within the canopy set/ enclosure.

E) BASE FRAME ARRANGEMENT. I) The base frame made of high quality M.S. Channel, Engine & Alternator are aligned thereon closely coupled with cross members mounted AVM. ii) The base frame shall have provision for mounting of acoustic Enclosure and Control Panel on it. It will be provided with lifting hook for convenient lifting of complete set i.e. along with engine & alternator.

2) AMF PANEL Supply of one No. AMF Panel for 30 KVA Diesel Generator Set suitable for auto operation both in case fo nomal supply power cut and Generator power cut and having suitable arrangement for tripping in case load current exceeds of full load current and the unit is comprising of following items.: i) 63A 4P MCCB with O/C & S/C Release. 2 No ii) 63A AC1 4P Duty Power Contactor, Coil - 230VAC.(Main & DG Contactor) 2 No iii) 63A ON Load Change Over Switch for Manual Chage Over failure of Auto System. 2 No iv) Auxillary Contactor, Coil - 24VDC, Auxiliary - 2NO+2NC. 4 No v) CT, 100/5A, 10VA, Class - 1.0 Tape wound. 6No vi) Auxillary Contactor Coil Voltage.230VAC, Auxiliary - 2NO+2NC. ( Type - 3TH30 ) 4 No vii) Digital Multifuction Meter. 2 No viii) Control Fuse with Base.(NS Type) 26 No

3) Making foundation for Diesel Generator Set by construction reinforced concrete foundation by 8 mm M.S. Rod Sand, Cement Mortar along with brick foundation both plastering with neat cemented finish of foundation having the following approximate size.: Length 5 Mtr Breadth 4 Mtr Height 1.5 Mtr

4) Making special type brick foundation & plastering with neat cement finish for 415V 3 phase 4 wire AMF panel incl. S & F suitable M.S. angle / channel with nuts, bolts & washers etc. as per direction of the EIC.

5) Supply and Fixing 500 Volt 63 Amps TPN (L&T) with gland box on both sides to be fitted on angle Iron Frame on Wall including Supply and Fixing Angle Iron Frame and Heavy type Nuts, Bolts and Washers etc.

6) Supplying and Laying of 3.5 Core 35 Sq. mm P.V.C./A(Al) Cable through Under Ground trench as per G.S.

7) Supply and Laying 10 Core 2.5 Sq. mm P.V.C./ A (Copper) Cable through Under Ground Trench as per G.S.

8) S & laying of 1.1 Kv. Grade 1 x 25 sq.mm.P.V.C insulated single core flexible copper wire in suitable size flexible PVC pipe on wall / floor from neutral earth bus to DG set neutral point including both side socketing.

9) Supply and Fixing Compression type Cable Gland suitable for following size of Cable.

i) 3.5 Core 35 Sq. mm

ii) 10 Core 2.5 Sq. mm

10) Finishing the ends of following size of Cable by Crimping Method including Supplying socket, tapes, etc. as required

i) 3.5 Core 35 Sq. mm

ii. 10 Core 2.5 Sq. mm

11) S & F Exhaust pipe of 100 mm. dia. MS black pipe incl. connection with the existing silencer and S & F Bend,flange, nuts, bolts and washers and necy. fixing materials as reqd. including making welding at required height.

12) S & F Exhaust pipe of 150 mm dia. Made of MS black pipe incl. Connection with existing silencer and S & F Bend,flange, nuts, bolts and washer and necy.fixing materials as reqd. including making welding at required height

13) S & F special type MS angle iron tray support made of 40X40X6 mm. MS angle structure for 100 mm dia. (horizontal Run) MS black pipe from DG Set to nearest Building's out side wall , grouted one side at building wall and other side on 40x40x6 mm angle iron made piller erected rigidly by concrete foundation with plastering & neat cement finish incl. S&F said pillar as directed by the E.I.C.

14)S & F special type MS angle iron bracket support made of 40X40X6 mm. MS angle with flat iron clamp with nuts, bolts & washers etc. for 200 mm dia. (Vertical Run)

15) Supply and Fixing rain protection canopy

16) Hiring charges for scaffolding by bamboo, coir rope by square type arrangement for smooth working and lifting of Ms black pipe for vertical installation including dismantling after completion of work.

17)Supply and Fixing Compression type metal gland for 100 mm dia flexible Pipe.

18) S & F flexible metal reducing socket for inter connection of different sizes exhaust pipes.

19) Making insulation by 2" Fire proof PU Foam as per direction of the EIC:-

i) 100 mm dia Exhaust Pipe

ii) 150 mm dia Exhaust Pipe

iii) Residential type silenser Pipe

20) Earthing with 80 mm dia GI Pipe (Tata Medium) x 3.0 Mtr long and 1 x 9/8 standerd G.I. (hotdip) wire (4 mtr long) 25 x 150 mm long galvanised bolts, double nuts, double washer, including socketing at both ends of standerd G.I. (hotdip) wire by crimping sockets / thinbles and supply and fixing 40 mm dia G.I. Pipe (IST Medium) protection (3 mtrs long) to be filled with bitumin partly under the ground level and partly above ground level to an average depth of 3 mtrs for soft soil.

21) Extra for providing massonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work (1:6) of 25 cm duly plastered with cement mortar cover of size hinged inspection cover of size 36.56 cm x 35.56 with locking arrangement GI reducer including drilling of 46 Nos 12 mm dia holes on GI Pipe.

22) Connecting the equipment body to earth busbar including supply and fixing 50 x 6 mm galvanised Hotdip MS Flat on wall / floor with GI saddle as required and making connections to equipments with including drilling holes, bolts, nuts and washers etc.

23) Supplying and fixing back PVC heat shrink sleeve for covering the 50 x 6 GI Flat

24) Extra treatment of soil by using coal and charcoal or coke for pipe electrode (for soft soil)

25) Checking all incoming and out going terminals of A.M.F. Panel /Busbar etc, one after another by megger testing and commissioning of D.G.Set after thorough checking and testing by special tools and tackles as per satisfaction of E.I.C

26) Supply and transprotation pouring of H.S.D.oil

27) Supply of Mobil oil

28) S & delivery of 200 ltrs capacity barrel made of heavy guage M.S.Sheet

29) S & delivery of best quality oil hand pump with 1" dia PVC flixible pipe ( 12' ft approx )

30) Earthing with 80 mm dia GI Pipe (ISI Medium) as per GS

31) Connecting the equipments with earth bus bar by 4 SWG GI wire as per GS

32) Supply & fixing of earth bus of size 40 mm x 6 mm GI flats on wall as per GS

SITC OF AC MACHINE Supply and Delivery of Split type A.C machines having capacity 2 Ton, 2 star Nominal cooling capacity 6700 Kcal/Hr. Make- Mitsubishi Heavy /O general .

S/F of 3 core round copper cable of 4 sqmm, 5/8"& 1/2" copper pipe, foam pipe, water drainage pipe, Insulating tape, fastener, 20A plug top etc as per direction of EIC.

Add: Installation charges for Split machines.

Add: Additional charges for angle iron structure for outdoor unit and mending works as per direction of EIC.

Add: Carrying charges for A.C machines.

Terms and condition The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Release of security will be as per PWD notification no.5784-PW/L&A/2M-175/2017 dated:12.09.2017

BHATTACHARYYA ENTERPRISE

SHANKAR BHATTACHARJEE