Building

Memorandum showing items of works to be carried out

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

Rupees One Hundred TwentyTwo Paise

1 04001A 402.00 useful materials and disposing off the excavated stuff upto any lead and lift.(A) Cmt 122.99

NinetyNine Only

Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

Rupees Two Hundred SeventyTwo

2 04B001B 212.00 stacking of useful materials and disposing off the excavated stuff uptoany lead and Cmt 272.57

Paise FiftySeven Only

lift (B) Dense or Hard soil.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

Rupees One Hundred ThirtySix Paise

3 4006 514.00 foundations etc. in layers not exceeding 20 cm. in depth consolidating each Cmt 136.92

disposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming, consolidating Rupees Four Hundred EightyOne Paise

and dressing complete (upto 10 ton) Eighty Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

Rupees Two Hundred NinetyFour Paise

5 04008A 84.00 thickness including watering, ramming and consolidating etc. complete. (upto 10 Cmt 294.38

ThirtyEight Only

Providing and laying cement concrete 1:4:8 (1-Cement : 4- Coarse sand : 8- Graded

Rupees Two Thousand Seven Hundred

6 5004A 76.00 Brick bats aggregate 40mm normal size) and curing complete excluding cost of Cmt 2769.69

SixtyNine Paise SixtyNine Only

formwork in (A) Foundation and Plinth (upto 10 ton)

Providing throating or plaster drip and moulding to R.C.C. Chhajja.

7 5018 135.64 Rmt 43.08 Rupees FourtyThree Paise Eight Only

Providing TMT Bar FE 500 reinforcement for R.C.C. work including bending, binding Rupees SeventySeven Paise

and placing in position complete upto floor two level (upto 10 ton) TwentyNine Only

Providing & laying controlled cement concreteM-250 with curing etc. complete incl.

the cost of form work but excluding the cost of reinforcement for R.C.C. work Rupees Four Thousand Eight Hundred

(1) footings, up to plinth etc. SixtySeven Paise Nineteen Only

Providing & laying controlled cement concreteM-250 with curing etc. complete incl.

the cost of form work but excluding the cost of reinforcement for R.C.C. work Rupees Seven Thousand Two Hundred

(1) columns up to plinth etc. TwentyFive Paise FiftyFour Only

Providing & laying controlled cement concreteM-250 with curing etc. complete incl.

the cost of form work but excluding the cost of reinforcement for R.C.C. work Rupees Six Thousand Four Hundred

(1) Plinth beams, up to plinth etc. FiftyThree Paise Ninety Only

Providing and laying controlled cement concrete M.20 for curing complete

Rupees Six Thousand One Hundred

9d 20.20 including cost of formwork and reinforcement for reinforced concrete work in Cmt 6152.92

FiftyTwo Paise NinetyTwo Only

Plinth Coping & Gred Slab

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing & laying controlled cement concrete M-200 with curing etc. complete

incl. the cost of form work but excluding the cost of rainrorcement for R.C.C. work Rupees Seven Thousand Nine Hundred

at any height and level for Ground Floor (1) M-200 for Column SixtySix Paise EightyEight Only

(2) M-200 for Lintel beam Rupees Six Thousand Five Hundred

Four Paise Fourty Only

(3) M-200 for Chhaja Rupees Six Thousand Five Hundred

R.A Four Paise Fourty Only

(4) M-200 For Beam Rupees Six Thousand Five Hundred

Four Paise Fourty Only

(5) M-200 for Slab

Rupees Eight Thousand Two Hundred

NinetyFour Paise Twelve Only

(6) M-200 for Stair Case. Rupees Six Thousand Nine Hundred

NinetyNine Paise Thirty Only

05014C + Providing TMT Bar FE 500 reinforcement for R.C.C. work including bending, binding Rupees SeventyEight Paise ThirtyFour

5016A and placing in position complete upto floor two level (upto 10 ton) Only

Provdg & laying controlled cementconcrete M-200 work.with curingetc. complete

incl. the cost of form workbut excluding the cost of reinforcementfor R.C.C. work in Rupees Eight Thousand NinetyTwo

:lintal,chajja,beam,column,stair For First Floor.(1) M-200 for Column Paise Twelve Only

(2) M-200 for Lintel beam Rupees Six Thousand Five Hundred

FourtyFive Paise EightyOne Only

(3) M-200 for Chhaja Rupees Six Thousand Five Hundred

FourtyFive Paise EightyOne Only

(4) M-200 For Beam Rupees Six Thousand Five Hundred

FourtyFive Paise EightyOne Only

(5) M-200 for Slab

Rupees Eight Thousand Three Hundred

ThirtyFive Paise FiftyThree Only

(6) M-200 for Stair Case.

Rupees Seven Thousand NinetyThree

Paise TwentyThree Only

Provdg & laying controlled cementconcrete M-200 work.with curingetc. complete

incl. the cost of form workbut excluding the cost of reinforcementfor R.C.C. work in Rupees Eight Thousand Three Hundred

:lintal,chajja,beam,column,stair M-200 for Slab for Second Floor. SeventySix Paise NinetyFour Only

05014C + Providing TMT Bar FE 500 reinforcement for R.C.C. work including bending, binding

Rupees SeventyNine Paise ThirtyNine

14 5016A+ 340.00 and placing in position complete upto floor two level (upto 10 ton) Kg 79.39

Brick work using common burnt clay building bricks having crushing strength not

Rupees Four Thousand Two Hundred

15 06002BA 91.60 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1-Cement : Cmt 4214.33

Fourteen Paise ThirtyThree Only

6 -fine sand)(B) Conventional (upto 10 ton)

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Brick work using common burnt clay conventional building bricks for super

06002BA+06 structure having crushing strength not less than 35 Kg./Sq.Cm. in cement mortar Rupees Four Thousand Four Hundred

006B 1:6 (1 cement : 6 fine sand) in super structure above plinth level upto floor two NinetyFive Paise NinetyEight Only

level (conventional ) (A) Ground Floor

06002BA+06 Brick work using common burnt clay conventional building bricks for super

006B structure having crushing strength not less than 35 Kg./Sq.Cm. in cement mortar Rupees Four Thousand Five Hundred

+06007B2A 1:6 (1 cement : 6 fine sand) in super structure above plinth level upto floor two ThirtyEight Paise Ten Only

level (conventional ) (A) First floor

06002BA+06 Brick work using common burnt clay building bricks having crushing strength not

006B less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : Rupees Four Thousand Five Hundred

+2x06007B2 6 -fine sand)(B) Conventional (upto 10 ton)S.F Eighty Paise TwentyTwo Only

Half brick masonary in common burnt clay conventional building bricks having

06008A2A+0 crushing strength not less than 35 Kg./Sq.Cm. in cement mortar 1:4 (1 Cement : 4 Rupees Six Hundred EightyFour Paise

6010B coarse sand) in super structure above plinth level upto floor two level Nineteen Only

(conventional ) (A) Ground Floor

06008A2A+0 (i) Half brick masonry in common brunt clay building bricks having crushing

Rupees Six Hundred Ninety Paise Fifty

20 6010B+0601 58.00 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse Smt 690.5

1B sand ) in F.F (B) Conventional (upto 10 ton)

Providing and fixing M.S. grills of required pattern to wooden frames of windows

etc. with M.S. flats at required spacings and frame alround, square or round bars Rupees One Hundred Six Paise

with round headed bolts and nuts or by screws (A) Plain Grill. (upto 10 ton) TwentyNine Only

Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the Rupees NinetyTwo Paise Seventeen

surface an even shade including cleanicn the surface of all dirt, dust and other Only

foreign matter.

Providing and fixing in position Alluminium single shutter door with

micron color alluminium anodized hollow section of approved shade

fabricated from alluminium Standered sections for outer leg frame size

63.50x49.50x2.65(of app.wt 1.657kg / rmt ) and Shutter handle vertical rail size

47.50x44.50x2.40mm (of wt 1.281 kg/rmt) and Shutter hinges vertical and door

top rail size 47.62x44.50x2mm (of wt 1.519 kg/rmt) and Shutter Bottom rail size

114.30x44.45x2.15 (of app.wt-1.824/kg/rmt) and shutter Lock/middle rail size

Rupees Two Thousand Nine Hundred

23 R.A 14.00 100.00xmmx44.45mmx2mm thick (of app. wt-1.603 kg/rmt) and glazing chips Smt 2976.47

SeventySix Paise FourtySeven Only

size19x17.30x0.90 (wt-0.124 kg/rmt) around the sheet paneled allover including

providing and fixing heavy handle havy lock,bracket,stoppers,wool pine ubber for

air tightness and providing and fixing 6mm thick compacted sheet of app.shade

at bottom and at top portion including all requared material and labour as per

detail drawing as directed. (For Toi.)

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing and fixing window having three track aluminum 50 micron Colour

anodized section with track vertical and top size 92x31.75x1.50 mm Wt @ 1.06 kg

/ m and three track rain bottom size 92x45.50x1.50mm Wt @ 1.659 kg / mt with

sliding shutters of handle member size 40x18x1.50mm [email protected] kg/mt and

shutter inter lock size 40x18x1.45 [email protected] kg/mt and shutter bottom and Rupees Two Thousand Eight Hundred

top rail size 40x18x1.55 [email protected] kg/mt with 5mm thick tinted colored shgc Sixty Paise ThirtyTwo Only

0.30,U value 0.61 glass with S.S.304 Mosquito net with EPDM glass Ruber and all

necessary fixtures and fastening and transparent silicon sealant fixing to frame and

as instructed by engineer in-charge.

Providing and fixing in position Alluminium single shutter door with

micron color alluminium anodized hollow section of approved shade

fabricated from alluminium Standered sections for outer leg frame size

63.50x49.50x2.65(of app.wt 1.657kg / rmt ) and Shutter handle vertical rail size

47.50x44.50x2.40mm (of wt 1.281 kg/rmt) and Shutter hinges vertical and door

top rail size 47.62x44.50x2mm (of wt 1.519 kg/rmt) and Shutter Bottom rail size

114.30x44.45x2.15 (of app.wt-1.824/kg/rmt) and shutter Lock/middle rail size

Rupees Two Thousand Nine Hundred

25 RA 14.00 100.00xmmx44.45mmx2mm thick (of app. wt-1.603 kg/rmt) and glazing chips Smt 2934.05

ThirtyFour Paise Five Only

size19x17.30x0.90 (wt-0.124 kg/rmt) around the sheet paneled allover including

providing and fixing heavy handle havy lock,bracket,stoppers,wool pine ubber for

air tightness and providing and fixing 6mm thick compacted sheet of app.shade at

bottom and 5mm thick glass at top portion including all requared material and

labour as per detail drawing as directed.

Providing and fixing in position Alluminium Double shutter door with

micron color alluminium anodized hollow section of approved shade

fabricated from alluminium Standered sections for outer leg frame size

63.50x49.50x2.65(of app.wt 1.657kg / rmt ) and Shutter handle vertical rail size

47.50x44.50x2.40mm (of wt 1.281 kg/rmt) and Shutter hinges vertical and door

top rail size 47.62x44.50x2mm (of wt 1.519 kg/rmt) and Shutter Bottom rail size

114.30x44.45x2.15 (of app.wt-1.824/kg/rmt) and shutter Lock/middle rail size

Rupees Three Thousand FiftyFour Paise

26 R.A 16.00 100.00xmmx44.45mmx2mm thick (of app. wt-1.603 kg/rmt) and glazing chips Smt 3054.24

TwentyFour Only

size19x17.30x0.90 (wt-0.124 kg/rmt) around the sheet paneled allover including

providing and fixing heavy handle havy lock,bracket,stoppers,wool pine ubber for

air tightness and providing and fixing 6mm thick compacted sheet of app.shade at

bottom and 5mm thick glass at top portion including all requared material and

labour as per detail drawing as directed.

Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm (JindaL Section :2434, @ Wt. 0.643 Kg/mt) with colour anodized Rupees One Thousand One Hundred

alluminium frame for ventilation with 5 mm thick frosted glass as details etc SeventyFive Paise FiftySix Only

complete for Ventilation

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads

Rupees One Thousand One Hundred

28 14012AA 178.00 of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- Smt 1120.36

Twenty Paise ThirtySix Only

coarse sand ) finishing with flush pointing in white cement.

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

Rupees One Thousand One Hundred

29 14013A 52.00 and jointed with gray cement slury mixed with pigment to match the shade of slab Smt 1166.93

SixtySix Paise NinetyThree Only

including rubbing and polishing etc. complete. (upto 10 ton)

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along the

Rupees One Thousand One Hundred

30 R.A 120.00 wall,clearing with water and oxalic acid etc. as directed. Including Average 75mm Smt 1104.94

Four Paise NinetyFour Only

thick cement concrete 1:2:4 (1-Cement : 2 coarse sand 4 stone aggregate 10 mm

nominal size) with finishing floting coat of neat cement complet. including water

proofing chemical as per manufacturer recommendation with 10 years guarantee

of water proofing.

Providing, fixing and construction of sandwitch type 25mm thick double polished

Granite of uniform size and colour for Kitchen/Pantry/Counter/Laboratory sink,

shelves etc in floor, dado or fascia up to 1.8mt long including necessary cement

mortar bedding in cement mortar 1:2 of required thickness. Kota shall be fixed over

Rupees Five Thousand Five Hundred

31 R.A 12.00 25mm thick rough kota stone bottom, cement joints and pointing as specified with Smt 5578.23

SeventyEight Paise TwentyThree Only

necessary making of edges,Including vertical kota support as per design, polishing,

curing daily moping with water, kerosene as directed for at least 15 days or up to

the satisfaction of Engineer-in-charge

Providing and fixing 25 mm thick pre polished on both faces kota stone slab front

edge machine cut polished in shelves below platform, in store or in cupboards at all

Rupees Eight Hundred SeventyEight

32 R.A 14.00 floors and levels jointed with gray cement slurry including making chases in wall Smt 878.7

Paise Seventy Only

and making good by filling with cement mortar 1:3(1 Cement : 3 sand) completed

as directed by the Engineer in charge.

Providing and fixing 19mm thick water proof plywood shutters with 1 mm thick

approved Formica / prelaminated sheet on both side for cupboard cabinet on

shutter with Teak wood frame of size 50 mm x 50 mm including necessary S.S Rupees Two Thousand Nine Hundred

fixtures and fastening etc also providing a coat of primer and two coat of oil paint Ninety Paise SixtyOne Only

on teak wood frame & batten patti as directed by Engineer-in-charge .

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Construction Septic tank inside dimension of 4.75 m in length, 2.00 m in width &

2.30 depth including excavating any type of soil as shown and mentioned in the

drawing, providing and laying 0.10 m thick plain cement concrete 1:2:4 ( 1 cement :

2 coarse sand : 4 graded stone agg.) 40 mm thick IPS flooring at bottom with

periphery brick masonary 0.35 m thick walls and intermediate wall 0.23 cm thick

CM 1:5 ( 1 cement : 5 coarse sand ) & RCC Top slabs12 cms thick in 1:2:4 (1 cement Rupees Ninety Thousand Six Hundred

: 2 coarse sand : 4 graded stone agg) including form work & reinforcement as per SixtyNine Paise SeventyTwo Only

design and 15 mm thick cement plaster in CM 1:4 with floating coat of neat

cement slurry. Also provide Two nos CI Manhole frame and cover of size 60 cm x

cm & PVC pipe 75 mm dia. 6 kgf / Sq cm pressure for air vent pipe with cowl etc

complete as per direction of Engineer in charge.

Providing 15 mm thick Mala cement plaster in single coat on fair side of brick /

17002 Rupees Two Hundred Fifteen Paise

35 732.00 concrete wall for interior plastering upto floor two level & finished even and Smt 215.85

B+17004 EightyFive Only

smooth : (ii) C M 1:4 ( 1 cement 4 sand) (A) Ground Floor

17002 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

Rupees Two Hundred ThirtyNine Paise

36 B+17004+17 374.00 or half brick walls for interior plastering upto floor two level and finished even and Smt 239.79

SeventyNine Only

007A smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)F.F

17002 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

Rupees Two Hundred SixtyThree Paise

37 B+17004+2x 112.00 or half brick walls for interior plastering upto floor two level and finishe even and Smt 263.74

SeventyFour Only

17007A smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)S.F

.17001 Providing 10 mm thick Mala cement plaster on ceiling and soffits of stairs upto floor

Rupees Two Hundred Fifteen Paise

38 A+17004 114.00 two level, in cement mortar (1:3) (1 cement : 3 sand) & finished even and smooth : Smt 215.3

A+17006 (A) Ground Floor

.17001 Providing 10 mm thick Mala cement plaster on ceiling and soffits of stairs upto floor

A+17004 two level, in cement mortar (1:3) (1 cement : 3 sand) & finished even and smooth : Rupees Two Hundred ThirtyNine Paise

A+17006+17 (A)First Floor TwentyFive Only

.17001 Providing 10 mm thick Mala cement plaster on ceiling and soffits of stairs upto floor

A+17004 two level, in cement mortar (1:3) (1 cement : 3 sand) & finished even and smooth : Rupees Two Hundred SixtyThree Paise

A+17006+2 (A)Second Floor Twenty Only

20mm thick gutka finish sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3- Rupees Three Hundred TwentyOne

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Paise Ten Only

Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two coats

of primer of approved brand and manufacture on new wall surface to give an even

42 19032.00 1092.00 shade including thoroughly brushing the surface free from mortar dropping and Smt 40.59 Rupees Fourty Paise FiftyNine Only

other foreign matter and sand papered smooth.

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Distempeing (Two coats) with oil bound washable distemper of approved brand

and manufacture and of required shade on wall surfaces to give an even shade,

over and including a priming coat with alkali resistance primer of approved brand Rupees SeventyFive Paise FourtyThree

after thoroughly brushing the surface and other foreign matter and also including Only

preparing the surface even and sand parpered smooth.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than

gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt

resistance exterior paint of required shade (Company Depot Tinted) with silicon

Rupees One Hundred FiftySeven Paise

44 R.A 1136.00 additives. New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and Smt 157.55

including priming coat of exterior primer applied @ 0.90 litre/10 sqm, Item

Includes two coat of primar and putty with scafolding at all level of work. As per

Approval of Engineer Incharge.

Providing and laying marble stone ( Keshariyaji Green / any Colour ) slab flooring /

Staircase Trade & Riser , Window sill, door threshold, door sill , Jams etc over

mm. (average) base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 Rupees One Thousand Four Hundred

and jointed with grey cement slurry matchj with stone using ingradiant colour FiftyTwo Paise ThirtyEight Only

including rubbing,edge Rounding and polishing complete.

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

46 22007.00 136.00 6131_paret- II Consentration Weight one percent is recommended i.e one litre 20 Smt 86.82 Rupees EightySix Paise EightyTwo Only

EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre

chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

47 23061.00 60.00 the help of clamp at every two metre C/C or shall be concelled as directed including Rmt 72.65 Rupees SeventyTwo Paise SixtyFive Only

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

Rupees NinetyOne Paise EightyFour

48 23062.00 62.10 the help of clamp at every two metre C/C or shall be concelled as directed including Rmt 91.84

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concelled as directed including Rupees One Hundred FourtyEight Paise

necessary fittings etc. including testing of pipe and joints and fixing the same with Twelve Only

adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 100 diametre 6kg/cm2 P.V.C

conforming to IS 13592- 1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 100 mm diametre x 149 mm Rupees Five Hundred TwentyThree

length x 145 mm Paise Eighteen Only

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre 6kg/cm2 P.V.C

conforming to IS 13592- 1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 100 mm diametre x 149 mm Rupees Eight Hundred ThirtyFour Paise

length x 145 mm ThirtyEight Only

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing in position cowel went to pipes.(C) 100mm dia Rupees Five Hundred Five Paise

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread Rupees Five Hundred EightySix Paise

down or hinged grating including the cost of cutting and making good the walls. Sixty Only

Providing and fixing water closet Squatting pan (Indian type W.C. pan) size 580 mm

(earthwork, bed concrete, foot rests and trap to be measured and paid for

separately) (A) Vitreous china - (i) Long pattern-white colour with 100 mm size “P”

23009+2301 or “S” trap for water closet squatting pan including jointing the trap with the pan Rupees One Thousand Four Hundred

1+23012 and soil in cement mortar 1 :1 (1 cement : 1fine sand) including in cement mortar ThirtyFour Paise Eighty Only

1 : 3 (1 cement : 3 coarse sand) a pair of white vitreous china 250 mm x 130 mm x

30mm foot rest for long pattern squatting pan water closet.

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing and fixing Wash basin with single hole for pillar tape with C.I. or M.S.

brackets painted white including cutting holes and making good the same but

excluding fittings. (A) vitreous china : (ii) Flat back washbasin 550 mm x 400 mm

size (i) IN white colour including Providing and fixing 32mm Dia. C.P. Brass waste for

0A+23029A+ Rupees Two Thousand Two Hundred

55 6.00 washbasin or sink and 32mm Dia. M. I. Fisher union for washbasin or sink with Nos 2233.79

23030A+230 ThirtyThree Paise SeventyNine Only

Providing and fixing pillar tap, capstan head, screw down high pressure with screws

shanks and back nuts.(A) 15 mm. dia.Including Providing and fixing 15 mm Dia.

screw down stop tap and 32 mm dia Waste Pipe for Wash Basin C.P.

Providing and fixing kitchen sink with C.I. or M.S. Brackets, painted white including

cutting holes in walls and making good the same but excluding fitting (C) Vitreous

23019+2302 china sink (i) 600 mm x 450mm x 150 mm size including Providing and fixing 40mm Rupees Two Thousand Five Hundred

0B+23021B Dia. C.P. Brass waste for washbasin or sink and 40mm Dia. M. I. Fisher union for Five Paise Thirteen Only

washbasin or sink.(HINDWARE, SONA, CERA brand of approved quality)

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass

Rupees Eight Hundred FiftyNine Paise

57 23024.00 6.00 mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge Nos 859.41

with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to Rupees Six Hundred Sixteen Paise

wooden plugs with C.P.brass scews.(B) 600mm x 20mm size. FourtyTwo Only

Providing and fixing screw down bib taps of following size.(B) Brass chromium Rupees One Hundred EightySix Paise

plated screws down Bib Tap. (i) 15mm dia. EightyThree Only

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm Rupees Six Hundred SixtyThree Paise

dia. FourtyThree Only

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required

61 22014.00 4000.00 capacity each with all necessary fittings and connection etc. complete on terrace. Lit 3.95 Rupees Three Paise NinetyFive Only

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated Rupees Seven Hundred Six Paise

mechanically and as per approved design Confirming to IS 15658 : 2006 including NinetyThree Only

35 mm Sand layer for levelling and filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard Rupees One Thousand Two Hundred

weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type FourtySix Paise NinetyTwo Only

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- cement :2- coarse sand :4-graded stone Rupees Three Thousand Six Hundred

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with Sixty Paise SeventySix Only

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets. (upto 10 ton)

Providing and fixing coloured wash down water closet (European type WC pan)

with integral 'P' or 'S' trape with soil pipe in cement mortar 1:1 (1 cement : 1 fine

23010+2301 Rupees One Thousand Six Hundred

65 2.00 sand) with coloured plastic seat cover with CP brass hinges and ruber buffers Nos 1648.15

7 FourtyEight Paise Fifteen Only

including cutting holes in wall and making good the same etc complete.

Constructing a soak pit of 2.50 m in out side diametre & 6.00 m deep of excavation

any type soil with 0.23 m thick honey comb brick masonary wall 5.50 m from

bottom & 0.50 m solid at top in cement mortar 1:6 ( 1 cement: 6 Sand) based on

Rupees Fourty Thousand Eight Hundred

66 RA 2.00 0.10 cm thick CC 1:4:8 (1 cement : 4 coarse sand : 8 hand broken stone aggregate Nos 40846.42

FourtySix Paise FourtyTwo Only

40mm nominal size) & R.C.C. top slab 0.12 m thick in CC 1:2:4 including cost of

form work & reinforcement as per detail drawings or as directed by Engineer -in-

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut Rupees EightyFour Thousand Two

earlier and disposal of unserviceable materials(A) By manual means in area of light Hundred FiftySix Paise SixtySeven Only

Providing and fixing chromium plated brass half trun flush cock of approved quality Rupees Two Hundred SixtyThree Paise

including fixing in pipe line etc. complete.(ii) 25mm dia. SeventySeven Only

Providing and laying white glazed tiles size 12"x12" and 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- Rupees Nine Hundred Fifty Paise

cement : 3-coarse sand ) finishing with flush pointing in white cement. (upto 10 ton) FiftyThree Only

Providing and laying white glazed tiles size 12"x18" and 6mm thick inskrting risers

Rupees Nine Hundred EightyTwo Paise

70 14009AA 172.00 of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) Smt 982.03

and jointed with white cement slurry (upto 10 ton)

Providing and fixing (600 x 450 x 200 mm) size viterous china laboratory sink with

CI or MS brackets painted white including cutting holes in walls and making good Rupees Two Thousand Fourty Paise

the same including providing and fixing 40mm dia CP waste couplin rails providing Twenty Only

Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand : 4-

Rupees Three Hundred FiftyTwo Paise

72 14015BA 34.00 graded stone aggregate 20mm nominal size) laid in one layer and finished with a Smt 352.01

floating coat of neat cement. (B) 50mm thick. (upto 10 ton)

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing and laying 12" x 12" Ceramic 10mm thick tile flooring of any colour and

design over 20mm (average ) base of cement mortar 1:6 ( 1 cement : 6 coarse sand

73 RA 28.00 ) and jointed with colour cement slurry including finished with flush pointing and Smt 808 Rupees Eight Hundred Eight Only

cleaning the surface etc. compl For ramp, Otta etc whereever applicable.

Earthwork for embankment including breaking clods, dressing with all lead and lift

Rupees One Hundred SixtyNine Paise

74 26001EA. 84.00 (excluding watering and consolidation)(B) From Borrow area For any lead and lift. Cmt 169.28

TwentyEight Only

Providing and fixing 25mm thick both side polish kota stone Rain Water Spout in

Rupees One Thousand One Hundred

75 RA 2.00 including fixing in position front edge machine cut polishing etc. complete. Each 1117.06

Seventeen Paise Six Only

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 Rupees TwentyFour Paise TwentyEight

including neat cement finishing, watering etc. complete. Only

Steel work welded in built up sections framed work including cutting hoisting fixing

in postion and applying a priming coat of red lead paint (A) In beams and joists

Rupees Nine Thousand One Hundred

77 11002AA 2.00 channels and angles, tees,flats with connecting cleats as in main and cross Quintel 9108.48

Eight Paise FourtyEight Only

beams,hip and jack rafters connected to common rafters and the like.

Providing and fixing brass cromium plated Surgical handle cock ( Cabtree, Essco,

Rupees Eight Hundred FiftyNine Paise

78 R.A 2.00 Ess-Ess, Plumber of approved quality) of size of 15 mm dia etc. complete Each 859.51

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm thick of M200 grade concret as per

Rupees Four Hundred Four Paise Five

79 14023A 60.00 approved design and including excavation for fixing in proper line and level,filling Rmt 404.05

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing & construction Tree plants required Digging of pits 0.6mt. x 0.6mt x

0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the Rupees One Hundred ThirtySix Paise

following plant of 4' to 6' height stack it well, maintain it for 3 month name of ThirtyFive Only

plants Conocarpus, Neem Etc...

Painting with weatherproof exterior emulsion acrylic based paint the pattern using

the grid and dimensions for door and window given as per the defined shade code

by experienced applicator of standard drawing and design according to the Rupees Three Hundred Eighty Paise

reference manual of Facade Branding for Health & Wellness Centres of Ayushman SeventySeven Only

Bharat Scheme as per the direction of the Engineer in Charge.

Painting the illustration circle of Diameter 44 inch with weather proof exterior

emulsion acrylic based paint as per defined shade code by experienced applicator

Rupees Two Thousand One Hundred

82 M.R 12.00 of standard drawing and design according to the reference manual of Facade Nos 2181.6

EightyOne Paise Sixty Only

Branding for Health & Wellness Centres of Ayushman Bharat Scheme as per the

direction of the Engineer in Charge.

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Painting with weatherproof exterior emulsion acrylic based paint the National

Urban Health Mission Logo and Ayushman Bharat Logo type using the grid and

dimension given as per defined shade code by experienced applicator of standard Rupees Seven Thousand Six Hundred

drawing and design according to the reference manual of Facade Branding for EightySix Paise Ten Only

Health & Wellness Centres of Ayushman Bharat Scheme as per the direction of the

Engineer in Charge.

Demolition and dismentling work Credit for buy back of

serviceable/usable dismantled doors, windows, roof item etc. these material are to

be removed from site by the agency immediately after demolition work completed

of (1) SC Valiyampura Old Building (Upset Value RS 9,050.00) as directed by

84 Credit Items -1.00 Engineer in charge. Total Minimum up set value for this item is Rs9,050.00 (upset job 9050 Rupees Nine Thousand Fifty Only -9050.00

value of the salvaged items of Rs 9,050.00 the credit value to be quoted shall not

be less than the upset value mentioned above the quoted amount shall be

deducted from the Contractor's First R.A bill.)

Providing & laying controlled cement concrete M-200 work with curing etc.

Rupees Five Thousand One Hundred

85 RA 14.00 complete including the cost of form work but excluding the cost of reinforcement Cmt 5120.7

Twenty Paise Seventy Only

for R.C.C. work in Road work With Trimix Machine.

Providing, fixing, testing and commissioning of ABC type 6kg capacity fire

extinguser monic phosphate powder 50,stored pressure guage. Controllable Rupees Two Thousand Four Hundred

discharge mechanism class A rating 3A & Class B rating as per IS 15683 ISI ThirtyFour Paise Ten Only

mark(ABC Dry chemical powder-MAP 50%)

Providing & Supplying office table of the following specifications Its size shall be

1500 Width x 750 Depth x 740 Height . The top shall be made from 25 mm thick

prelaminated board . All the edges are sealed with 2 mm thick PVC edge band all

around . Side panels shall be made from 25 mm thick pre- laminated paticle board .

All the edges are sealed with 2 mm thick PVC edge band on the user side and

Green mm on the top and bottom side .The side panels have 2 glide screws each for

Enterprise/ levelling of the desk. Modesty panel shall be made from 18 mm thick pre-

Ref laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge

Rupees Seven Thousand Eight Hundred

87 PIU/AC/Furni 2.00 band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated No. 7878

Seventy Eight and Zero Paisa Only

ture/1612/2 particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the

025 Item No exposed surfaces as per requirement . The drawers

110 are provided with suitable slides for smooth operation . All the pedestal drawers

are centrally locked with a single key .Drawer slides are of Hettich.The rate shall

include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing & Supplying High Back Chair. SEAT/BACK A SSEMBLY: The seat is

made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.The Back is

made up of injection mou1ded glass filled nylon & upholstered using Mesh

Green fabric with high tenacity yarn.

Enterprise/ * SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D)* BACK SIZE : 45.0 cm. (W) x

Ref cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane

Rupees Twelve Thousand Two Hundred

88 PIU/AC/Furni 2.00 seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as No. 12292.71

Ninety Two and Paisa Seventy One Only

ture/1612/2 per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest is

025 Item No designed with the following features : • Up-Down adjustment- 8 steps (8

125 0±0.Scm range)• Height adjustable armrest structure which is Powder Coated

& fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal

insert.LUMBAR SUPPORT

Providing and Supplyin .Mid Back Chair. SEAT/BACK A SSEMBLY: The seat is made

up of 1.2 ± 0.1cm thk. hot pressed plywood measured.The Back is made up of

injection mou1ded glass filled nylon and upholstered using Mesh fabric with high

tenacity yarn.* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D).* BACK SIZE : 45.0 cm. (W) x

65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane

seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per

IS:7888 for 25 Percent compression.ARMRESTS : The adjustable armrest is

designed with the following features :

• Up-Down adjustment- 8 steps (8 0±0.Scm range)• Height adjustable armrest

structure which is Powder Coated and fitted with an armrest top. • Fixed Armrest

Ref Rupees Eleven Thousand Three

Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar

89 PIU/AC/Furni 4.00 No. 11348.36 Hundred Forty Eight and Paisa Thirty

support consists of polypropylene pad with moulded polyurethane foam and

ture/1612/2 Six Only

covered with polyester fabric.The Height of Lumbar pad can be adjusted through

two projecting knobs provided on the rear side of the pa6. Lumbar pad has an

adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The

adjustable tilting mechanism is designedwith the following features.• 360°

revolving type.• Single point control.• Front-pivot for tilt with feet resting on

ground ensuring more comfort.• Tilt tension adjustment.• 4-position locking with

anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT

ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi

± 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black 30 Percent

glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing & Supplying of Storwel with Greenguard, Indoor Advantage Gold,

GreenPro etc. & should be mandatorily submitted along with Bid.Storwel plain shall

have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded

construction. It should have the shelf thickness of 0.7 mm, Back thickness of

0.8mm, Door thickness of 0.8mm (high yield strength) and all other components

shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’

grade high yield strength as per IS:513. The Storwel Plain should have a Mazak

Rupees Fourteen Thousand Five

Bhavana/ handle and Three way locking mechanism with Shooting Bolts. It should have a

90 4.00 No. 14544 Hundred Forty Four and Zero Paisa

Item No 33 height wise adjustable shelf mounting which shall have a Uniformly Distributed

Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex

plastic base. The finishing shall include Epoxy powder coated to the thickness of

microns (+/- 10). Plenty of colour options and shelving options shall be

available.The rate shall include all materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

Providing & Supplying of round stool should have of round stool. Overall

dimension should be Diagonal Leg Dia 538 mm H470 min-655max. Top plate

made of SS 304 made sheet with spin section of thickness 1mm & non corrosive. It

has a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8

Screw having dia of 22 mm is used for height adjustment of the seat base. The

round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The

Hub is welded with the legs and it accommodate and cover the lead screw

Bhavana/ Rupees One Thousand Five Hundred

91 2.00 mechanism. The under-structure consist of 4 legs made up of MS ERW tube of No. 1565.5

Item No 9 Sixty Five and Paisa Fifty Only

diameter 25.4 mm and 1.6mm thick. The press formed pipe leg give a round &

clean look. All the legs is Provided with 4 nos of Nylon-6 bush. All metal

components are pre treated with zinc phosphating in 7 tank process and then

powder coated with epoxy polyester powder coating . Safe working load is 135kg

.The rate shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

Green supplying and fixing s.s 304 laboratory stool for hospital used PSP-1037-SS

Enterprise/ Stool 14" Square stainless steel 18 gauge contoured seat Stainless steel base

Ref with heel rest for added comfort Tubular legs fitted with rubber shoes

Rupees Nine Hundred Twenty Nine and

92 PIU/AC/Furni 4.00 pretreated and power coated. As directed by Engineer in charge etc No. 929.2

Paisa Twenty Only

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing & Supplying of Examination couch with full storage of Examination couch

with full storage- O overall dimension of L 2065 X W 850 X H 850 mm. The backrest

has ratchet mechanism for tilting the backrest. Leg frames & intermediate frames

should be made of ERW tubes having section of 30 x 30 square tubes with

thickness of 1.6mm. Nylon 6 leg shoes is given to avoid wear & tear. MS sheet

metal lying surface of thickness 1.2mm is used. Top sheet metal panel base frame

of 25 x 25 ERW square tubes of

PIU/AC/Furni Rupees Twenty Six Thousand Eight

93 2.00 thickness 1.6mm is used. Ratchet is made of MS Strip with section 40 x 4 to No. 26866

ture/1608/2 Hundred Sixty Six and Zero Paisa Only

Provision the backrest tilt. The table is Provided with Leathrite calf rest which is

adjusted on ss304 made lithotomy rod. The Rod and the calf rest is ht adjustable

and swivel to achieve desired position. The table is Provided with SS bowl stand to

collect fluids and discharge during procedure. Table is pre-treated and powder

coated with epoxy powder coating. Safe working load is 135kg. The rate shall

include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge

Ward Care Bed Delux (Plain Bed) (I.C. 7500) (1900mmL X 91OmmW X 61OmmH .)

Providing & Supplying a Ward Care Bed Frame work of specially designed CRC

rectangular heavy tube. machine pressed CRC sheet top with proper support. SS

head & foot bows with laminated panels. Four side saline arrangement location Rupees Four Thousand Five Hundred

94 PIU/AC/Furni 4.00 No. 4545

L.eg fitted Forty Five and Zero Paisa Only

with shoes. Pretreated & Powder coated. Selection as per Engineer-In-Charge etc.

completed. ( As per Photo attached)

Providing and Supplying hospital locker. The bedside locker has single drawer

and cabinet with lock and with plastic molded handle. There is space between

plastic top and the cabinet to keep the general items for the frequent use. Cabinet

is Provisionided with lock to keep the valuable items for the safety. overall

dimensions should be 490mmW x 410mm D x 941mm H.Corner tube made of ERW

round tube with section 25.4 mm dia of 1.2 mm thickness.Cabinet made of CRCA

sheet of 0.8 mm thick Provided with lock.( 470 mm x 410 mm x 382 mm).Top made

Wesource/ of ABS of 2.2 mm thick. Top has recessed and contoured shape for better aesthetic

Ref and usability.Plastic molded knob is Provisionided with Matt finish and dome

PIU/AC/Furni shaped for better grip.Plastic molded castors with 50 mm dia placed in diagonal Rupees Twelve Thousand Twenty and

ture/1608/2 locking arrangement.RAL white, plastic parts in Grey.5 kg UDL on both the tops and Paisa One Only

025 Item No 10 kg in the cabinet.All metal components are pre treated with zinc phosphating in

04 7 tank process and then powder coated with anti microbial epoxy polyester

powder coating to fulfill the requirements for bacterial protection against at least

commonly found bacteria in Hospital environment [Gram positive and Gram

Negative].goods are supplied in knocked down construction to reduce carbon

emission. The rate shall include all materials, hardware, and labour etc. complete

as per instruction of engineer-in charge.

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Green Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow cover ,with

Enterprise/ 12mm thick prelam mdf back- 900x1950x100mm - goldline plus pu form 40 density

Ref 300 gsm cottan satin quilt cover.Mattress back putti made of 12mm thick prelam

Rupees Nine Thousand Six Hundred

96 PIU/AC/Furni 4.00 mdf bothside white finish.Kurlon dew pillow 600x400 Fill: Polyester Fibre Quality of No. 9653.58

Fifty Three and Paisa Fifty Eight Only

ture/1612/2 shell fabric: 110 GSM cotton satin patti Outer Shell Layer: Cotton Fill Weight (in

025 Item No gms): 650.Bedsheet with pillow 100 Percent cotton of bombay dyeing or eq.

Green Providing and fixing curtain (Cotton fabrics of rate of Rs. 400 per sqmtr + support

Enterprise/ cotton cloth) with Aluminum rod of dia 40 to 50mm dia with SS rings

Rupees One Thousand Sixty Three and

97 PIU/AC/Furni 24.00 sqmt 1063.53

Paisa Fifty Three Only

Green Supplying of Dust bin of approved brand Sintex or equivalent (as per photographs)

Enterprise/ of 100 Liter Capacity

Rupees One Thousand Five Hundred

98 PIU/AC/Furni 4.00 No. 1575.6

Seventy Five and Paisa Sixty Only

Providing and Supplying of IV pole of saline stand. Overall dimension should be

Wesource/ 250 mm PCD with height adjustable from 743 mm to 1150 mm. it is fully SS made

Ref used on bed with telescopic rod for height adjustment. The bottom adapted is

PIU/AC/Furni mm dia, fixed tube is 15.9 mm dia , 1.6 mm thick ERW Tube. Telescopic rod is 12 Rupees Four Thousand Four Hundred

ture/1608/2 mm dia ERW tube. there are 2 nos 6 mm dia hooks to hand saline bags. Maximum Seventy Nine and Paisa Thirty Five Only

025 Item No load bearing capacity is 2kg per hook.The rate shall include all materials, hardware,

05 and labour etc. complete as per instruction of engineer-in charge.

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing and supplying of Examination couch with full storage of examination

couch overall dimension 1975 mm (L)x560 mm (w)x805 mm (H).Examination couch

with three drawers with three cabinates in built step stool and BP tray holder the

base frame should made of 30mm x 30 mm x 1.6 mm thick ERW tube. The

cabinates should made of 1 mm thick CRCA sheet with recessed plastic handles and

with lock and plastic door latch. the hindges of the cabinate should be made of

sheet metal and pin arrangement. The internal dimension of the two side cabinates

should be 422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the

Wesource/ central cabinates should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage

Ref cabinate unit should be actuated with C shaped handel lever. The drawers should

PIU/AC/Furni made of 1 mm thick CRCA sheet with recessed plastic handels and work on double Rupees Forty Two Thousand Three

ture/1608/2 extension ball slides for smooth glide. The internal dimension of the drawer should Hundred Nineteen and Zero Paisa Only

025 Item No be 330 mm (W) x 427 mm (D) x 92 mm (H) . The mattress plateform should be

07 mm thick which is made of 12 m thick ply and PU foam and covered with leatherite

cover.The cover should be water resistance,fire retuadant, aniti micraobial.the

cover should have in-vitro cytotoxicity test report from repted test lab . the end of

the top matress surface should be tapered end edge for ergonomic benifit. there

should be ss304 made tissue roll holder present on the lower side of the back

rest.There should be 1 mm CRCA made made BP aparatus holder which should be

adjustable in height on SS Made height adjustable rod. total load bearing capacity

should be 135 kg.The examination couch should be priveded withsix numbers

levelers made of metal and plastic for adjustment on the uneven floor. All the

Providing, fixing, testing and commissioning of CO2 type fire extinguser of capacity

4.5 kg filled with CO2 Gas as per IS 15222 with controll discharge mechanism fitted

with Hose and Horn applicable on Class B Fire rating 21B confirm to IS

Rupees Six Thousand Nine Paise Fifty

101 M.R 8.00 bearing ISI mark CO2 cylinder as per IS 7285monic phosphate powder 50,stored Each 6009.5

pressure guage. Controllable discharge mechanism class A rating 3A & Class B

rating as per IS 15683 ISI mark(ABC Dry chemical powder-MAP

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC /

Rupees Five Hundred EightyTwo Paise

102 1-2-1. 68.00 Metallic/Wooden box, single mounting base frame covered with Pt 582.77

SeventySeven Only

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete CAT III

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of .ISI marked 1.1 kV Grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type switch and hum

free EME step type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box, single Rupees Eight Hundred Nine Paise One

mounting base frame covered with textured/metallic/white front plate modules Only

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

Rupees Six Hundred Twelve Paise Six

104 12.00 modules erected on / in wall / ceiling as per pipe erected with following type of Pt 612.06

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete CAT III

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

Rupees Eight Hundred NinetyFour

105 12.00 board.(f) with medium class Rigid PVC pipe and accessories erected concealed in Pt 894.86

Paise EightySix Only

wall/ceiling complete Cat lll

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (

green) earthing wire from mcb d b board.(f) with medium class Rigid PVC pipe and Rupees One Thousand FourtySix Paise

accessories erected concealed in wall/ceiling complete Cat lll ThirtySix Only

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with Rupees Three Hundred Nine Paise Six

textured / metallic/white front plate modules erected on / in wall / ceiling with Only

following type accessories CAT III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Rupees TwentyFour Paise TwentyFour

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Only

approved manner as directed (a)20 mm

(b) 25 mm Rupees ThirtyThree Paise ThirtyThree

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

Rupees Seventeen Paise Seventeen

110 20.00 coupling, PVC bushes, Check-nuts etc. complete of following sizes. (1) 20 mm Mtr 17.17

(2) 25 mm Rupees TwentyOne Paise TwentyOne

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated Rupees One Hundred Four Paise Three

stranded wire of green colour for earth continuity of following size (A) With Only

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall

Rupees One Hundred Fourty Paise

113 120.00 / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of Mtr 140.39

ThirtyNine Only

1-4-2. green colour for earth continuity of following size (A) with medium class Rigid PVC

pipe and accessories (a) 2 wire 4 sq. mm

(b) 2 wire 6 sq. mm Rupees One Hundred EightyFour Paise

EightyThree Only

Call bell gong type suitable for 230 volts, 50 c/s. AC supply complete Erected Rupees FourtyTwo Paise FourtyTwo

Decorative call bell Ting-tong box type 250 volts complete erected Rupees SeventyOne Paise SeventyOne

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED Rupees Five Hundred ThirtyFive Paise

LED driver efficiency > 85 % Thirty Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Tube Light with integral driver (v)

36-40 Watts, Surge-2 kV, IP-20, conventional 4 feet CAT III

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp Rupees One Hundred EightyEight Paise

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP EightySeven Only

holder (iii) 10 to 15 watts CAT III

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

Rupees One Thousand Eight Hundred

119 2-16-1. 8.00 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver Ea 1871.53

SeventyOne Paise FiftyThree Only

efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4kV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii) 24 - 36 watts CAT III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in Rupees One Hundred TwentyThree

existing box. confirming to IS 8828/1996 with ISI Mark CAT III Paise TwentyTwo Only

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

Rupees Three Hundred Six Paise Three

121 8.00 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having Ea 306.03

3-10-3. following capacity (A) 6 to 32 Amp. CAT III

(B) 40 Amp. CAT III Rupees Three Hundred TwentyFive

Paise TwentyTwo Only

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. Rupees One Hundred SeventySix Paise

MCB. SeventyFive Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Rupees One Thousand Four Hundred

MCBs.(The DBs should be used of same company of MCB to be used) suitable for NinetyTwo Paise SeventyEight Only

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (iv)12 way

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action & Rupees Two Thousand Four Hundred

tripping with all advance feature & do not incorporate any electronic component. FiftyEight Paise ThirtyFour Only

for following Max. rating erected as directed(ii) 40Amps. DP CAT III

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of (B) Inner chemical (CCM Rupees Four Thousand Five Hundred

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- NinetyOne Paise FourtySix Only

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted. (a) For Electrical Installation up to 440V in normal

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm. Rupees Seven Hundred NinetyFour

Paise EightySeven Only

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable

128 4-1-1. 110.00 Mtr 85.85 Rupees EightyFive Paise EightyFive Only

KV.grade to be erected as directed of following size. © 2 core 6 sq.mm

Providing and erecting Approved make Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and

Rupees One Thousand Five Hundred

129 5-1-1. 14.00 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire Ea 1596.81

NinetySix Paise EightyOne Only

with earthing. [Make shall be approved by Engineer in charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

Rupees One Hundred Eight Paise Seven

130 5-2-1. 7.00 rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible mtr. 108.07

wire with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Rupees One Hundred Eight Paise Seven

Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. Only

Providing & erecting open well type horizontal mono block pump set with stainless

steel body having following specification (A) 0.5 H.P. single phase open well motor Rupees Eight Thousand Seven Hundred

pump set having discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia. TwentyEight Paise FourtyTwo Only

delivery pipe with control panel CAT II

Providing and erecting ISI marked PVC insulated PVC Shethed Flat flexible

133 9-7-1. 50.00 Submersible copper cable approved make of following size. (a) Mtr 65.65 Rupees SixtyFive Paise SixtyFive Only

3 Core x 1.5 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

134 4-5-1. 40.00 locating the fault all over the run and back filling the same and making the surface Mtr. 55.55 Rupees FiftyFive Paise FiftyFive Only

as normal ground.

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Rupees One Hundred SeventyTwo

Engineer-in-charge. (A) 25 mm dia Paise SeventyOne Only

Quantities Rates 2024-25 (with 1% L.C)

NBO No. Estimated but Item Description Unit In Figure Amount

may be more Rs. Ps.

Supplying & erecting approved make SMC press moulded composite FRP. loop-in,

loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement Rupees Two Hundred NinetySeven

having locking arrangements with mounting clamp with nuts, bolts & washers Paise NinetyFive Only

suitable for erection on pole with cable clamps& earth bolt of following size of

box.(D) 140mm x 140mm x 100mm [deep]

Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long

duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate, erected on wall or Rupees Three Hundred FourtyThree

corner for mounting street light luminaire with necessary hardware materials duly Paise Fourty Only

In Words Rupees Seventy Eight Lakh Three Thousand One Hundred Fifty One and Paisa Sixty Six Only

I/ We am/ are willing to carry out the work a..................…………...................................................................................................................................% above/ below percent ( should be written in figures and

* Estimated amount Put to tender

Add/Deduct__________________% above / below

1 All works shall be carried out as per Punlic Work Department and other specification of division or as directed.

2 All the columns in schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site ( prior commncement of work and its close). In all respect and hold good for work under all condition,site,moisture,weather etc.

4 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per instruction of PIU engineer in charge.

5 To be continued on additional sheets,if found necessary.

Dy Executive Engineer Executive Engineer

PIU Sabarkantha PIU Sabarkantha