GENERAL-Perumbavoor Municipality - Annual Plan -Electrical maintenance work of EMS Town Hall Perumbavoor extending for Project year. -General Electrical Work

Amount

Maintenance

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

90.3.22.3:Supply & installation of light fittings on flat iron bracket <br> Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA sheet of .5mm thickness complete with all accessories and lamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture

90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD426086/2022-2023: Supply, conveyance, installation, testing and commissioning of 18 W LED recess mounting round down light fittings made of diecast aluminium, having efficiency not less than 110 L /w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea complete with all accessories in the existing opening of false ceiling, giving connections with the existing wire etc., as required.

OD427320/2022-2023: Dismantling the 18 W LED round/Square down light fitting from position ,detaching in to parts, checking , renewing the defective driver unit ,attending minor repairs ,assembling the light fitting and refitting the same in position.

OD427321/2022-2023:Dismantling the 18 W LED round/Square down light fitting from position ,detaching in to parts, checking , renewing the defective chip set ,attending minor repairs ,assembling the light fitting and refitting the same in position.

OD426209/2022-2023:Dismantling of ceiling fan from the position , seperating into parts, cleaning ,checking the parts , rewinding the defective motor with super enamelled superior quality copper winding wire ,renewing the defective parts , painting the same with synthetic enamel paint and replacing the damaged rubber reel, nuts and bolts with washers and safety pins reinstalling the same as required.

1.59:Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins reinstalling the same as required.

OD426277/2022-2023:Supply of Ball bearing for 1200 mm sweep ceiling fan.

OD426278/2022-2023:Supply of 2.25 mfd. capacitor for 1200 mm sweep ceiling fan.

OD426961/2022-2023:Supply and renewal of Stepped type Modular Fan regulator (2 module) of 1200 mm sweep ceiling fan.

OD426395/2022-2023:Supply of Rubber shackle,Split pin/cotter pin etc. for 1200 mm sweep ceiling fan.

OD426396/2022-2023:Dismantling of heavy duty exhaust fan from the position , seperating into parts, cleaning ,checking the parts , attending minor repairs, renewing the defective parts , painting the same with synthetic enamel paint and replacing the damaged rubber reel, nuts and bolts with washers and reinstalling the same as required.

OD426397/2022-2023:Dismantling of heavy duty exhaust fan from the position , seperating into parts, cleaning ,checking the parts , rewinding the defective motor with super enamelled superior quality copper winding wire , attending minor repairs , renewing the defective parts , painting the same with synthetic enamel paint and replacing the damaged rubber reel, nuts and bolts with washers and reinstalling the same as required.

OD426398/2022-2023:Supply of Ball bearing for Heavy duty exhaust fan.

OD426399/2022-2023:Supply of 3 mfd. capacitor for 1200 mm sweep ceiling fan.

OD426473/2022-2023:Supply , Supply, conveyance, installation, testing and commissioning of 10 W LED integral type wall mounting light fittings having efficiancy not less than 110 L /w, pf greater than 0.95, THD less than or equal to 10%, complete with all accessories , giving connections etc. as required.

OD426784/2022-2023:Supply, conveyance and installation of 3/5 HP borewell pump controller complete with Single phasing preventer, phase reversal protection, unique dual voltmeter and ammeter, Pump On and Supply On indicator ,relay contactor with 360V coil etc. and giving connection as required.( L & T Borewell Pump Controller MU-G6 DOL (3/5HP) Three Phase or equivalent make )

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

OD426894/2022-2023:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. - 1 x 1 sq. mm.

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

OD427324/2022-2023:Dismantling the 120 W LED Flood light fitting from position ,detaching in to parts, checking , renewing the defective chip set ,attending minor repairs ,assembling the light fitting and refitting the same in position.

OD427325/2022-2023:Dismantling the 120 W LED Flood light fitting from position ,detaching in to parts, checking , renewing the defective driver unit ,attending minor repairs ,assembling the light fitting and refitting the same in position.

SHEFEEK K I

ASHRAF T MUHAMMED

Bidder Name

GK INDUSTRIES

ASHRAF T MUHAMMED

SHEFEEK K I