BSCC/EE/ELE/32/2026-27

Supplying, installing and commissioning of Smart LED TV of Screen 55 inch LED, Resolution HD, Refresh Rate 60 hertz, Connectivity 2 HDMI ports, 1 USB Port, Sound 20 Watts Output, Smart TV Features Personal Computer, Screen Share, Music System, You Tube Enabled, Internet Compatible, Wifi per Day with Tripod Stand with necessary accessories.

Supply of Air Freshner cakes

Supply of Room Freshner

Supply of Urinal cakes

Supplying & fixing of Coil Holding Refractory Bricks suitable for vertical coil insertion system electrical crematorium furnace conforms to IS-2042. The bulk density of the brick will be max of 2.20gm/cm2 and operating temperature of 6500c to 8500c and max temperature of 13000c.The size of the bricks- 115 x 115 x300mm including loading. Unloading and transportation to work site.

Supplying & fixing of Insulation Refractory STANDARD bricks suitable for crematorium furnace having the bulk density of max of 0.60gm/cm2 and maximum working temperature of 13000c. the size of brick 75 x 115 x 225mm including loading and unloading to work site

Supplying and fixing of STD IS 8 Alumina Refractory bricks suitable for electrical crematorium furnace having maximum working temperature of 1300 Degree c.The size bricks 75 x 115 x 225mm including loading, Unloading and transportation to work site.

Supplying & fixing of STD IS 6 Alumina Refractory bricks suitable for electrical crematorium furnace having maximum working temperature of 1300 Degree c.The size bricks 75 x 115 x 225mm including loading, Unloading and transportation to work site.

Supplying & fixing IS 8 Alumina Refractory Side Arch Bricks suitable for electrical crematorium furnace having required mechanical strength and maximum working temperature of 13000c. The size bricks- 230 x 115 x 75/65mm including loading, unloading and transportation to work site.

Supplying & fixing of Refractory Slabs (MCL) suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528, max working temperature up to 13000C.The size of the bricks-115 x300 x 450mm including loading and unloading, transportation to work site.

Supplying & fixing Body Laying With 70% aluminiumMoulded RefractoryBricks (MCL) suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS-2042 and IS-1528 max working temperature up to 13000c. The bricks-150 x 300 x 600mm including loading, unloading and transportation to work site.

Supplying of refractory cement fine ACC-50 (25 kg/bag) for casting refractory bricks

Supplying of refractory cement FIRECRETE super (25 kg/bag) for casting refractory bricks

Supplying & fixing of Refractory cement white heat K ACC make for casting refractory bricks. 25 kgs bag

Supplying of Acoustic Set Thermotex LiquidBlinder suitable for casting refractory bricks. 40 kgs bucket

Supplying & fixing of FIBER blank kit 64 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of FIBER blank kit 96 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of FIBER blank kit 128 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of SS stud of size 304 x 250 x 10mm with locking washer for door work

Supplying & fixing of FIRE clay cement (40 kg/bag) for casting refractory bricks.

Supplying & fixing of Refractory Slabs IS-8 high aluminium suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528, mx working temperature up to 13000c. The size of bricks-100 x 300 x 600mm including loading and unloading, transportation to work site.

Supplying & fixing of Refractory Slabs IS-8 high aluminium suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528, mx working temperature up to 13000c. The size of bricks-100 x 300 x 450mm including loading and unloading, transportation to work site.

Supplying & fixing of 3.5 KW Heating coils made out of 5.8mm thick APM wire, heating Zone should be 950mm length, End terminal rod SS 304 grade 10mm dia 550mm length suitable for vertical mounting system in electrical furnace including porcelain beeds, spacers supporting rods complete including loading, unloading and transportation to work site.

Supplying & fixing of Epoxy of Epoxy insulators (bus bar mounting )

Providing servicing, repairing and overhauling of existing body charging trolley complete.

Servicing & cleaning of Scrubber, Tank,Scrubber duct,Exhaust Blower, Exhaust Duct Furnace to Chimny and cleaning of chimny (6 monts once)

Furnace main door servicing include of bearing replacement 2 nos and door lifting chain replacement

Supply & erection of 1/2HP 3Phase 50Hz, 1440RPM flange mounting motor with gear output 10RPM with grounting frame, complete including loading, unloading and transportation to work site spare.

Supply & erection 2HP 3Phase, 50Hz, 1440 RPM induction flange mounted water pump for Scrubber, inlet 2 inch, outlet 1 and half inch,

Supply & erection of 1HP single phase 50Hz water pump (open well Submersibal pump set)

Supply & erection of Smoke exhaust motor 7.5 Hp 3 phase, 50Hz,1500rpm, induction motor , with table lock pully 180 dia, 2 Nos grove, Make ABB/Kriloskar/crompton Greaves or equalent.

Supply & erection of SS310 pipe Thermocouple 19 mmOD & 700mm length, simplex

Supply & erection of 2 wire Temperature controller range 0 to 1200 c of size 99 x 99MM

Providing door lifting mechanism set for manually operating made out by 2 bearings 30mm dia and 50mm dia bore shaft and 40x40x100mm shifting block with handle and mounting bracket.

Supply & erection of 22211CK bearing (for exhaust motor )

Supply & erection of 311H sleeve (adapter)

Supply & erection of B-58 belt

Supply and replacement of Smoke exhaust motor fan shaft fabricated out of SS310 dia 50mm x 780mm length with balancing impler 2nos key slot of 10 x 10mm with computer balancing impler-380mm dia,160mm width, 3mm sheet fabricated(SS304)

Supply and fixing of VERTICAL heating element suitable to operate on 220 volts 50Hz (4.5 KW capacity of heating element) element shall be made out of 8 SWG 25mm dia 6 mm pitch total length 3100 mm superior quality nichrome wire coil and shall be capped with fiberglass tube. New element shall be fixed in furnace heating slots using necessary labour consumable and terminated with end bolts etc complete.

Supply and fixing of VERTICAL furnace coil holding bricks (240 X 300 X 80mm) made out of refractory material to with stand a temperature of 1000 C using required refractory cement and other binding material to form into required shape (as per BIS-8) complete

Supplying & fixing of 12 Mtr Highmast accessories that include Winch Plate, 250 KG Winch, SS wire Rope 50 Mtr Length, Moulded Cable 4SqmmX3 Core 20 Mtr Length, D clamp Tumble,Crane charges, Labour charges for Data Rate.With 0.5HP Motor

Supplying & fixing of 12 Mtr Highmast accessories that include Winch Plate, 250 KG Winch, SS wire Rope 50 Mtr Length, Moulded Cable 4SqmmX3 Core 20 Mtr Length, D clamp Tumble,Crane charges, Labour charges for Data Rate.Without Motor

Supplying & fixing of 16 Mtr Highmast accessories that include Winch Plate, 350 KG Winch, SS wire Rope 65 Mtr Length, Moulded Cable 4SqmmX3 Core 30 Mtr Length, D clamp Tumble,Crane charges, Labour charges for Data Rate. With 1.HP Motor

Supplying & fixing of 16 Mtr Highmast accessories that include Winch Plate, 350 KG Winch, SS wire Rope 65 Mtr Length, Moulded Cable 4SqmmX3 Core 30 Mtr Length, D clamp Tumble,Crane charges, Labour charges for Data Rate. Without Motor

Supplying & fixing of 20 Mtr Highmast accessories that include Winch Plate, 350 KG Winch, SS wire Rope 65 Mtr Length, Moulded Cable 4SqmmX3 Core 30 Mtr Length, D clamp Tumble,Crane charges, Labour charges for Data Rate. With 1 HP Motor

Supplying & fixing of 20 Mtr Highmast accessories that include Winch Plate, 350 KG Winch, SS wire Rope 65 Mtr Length, Moulded Cable 4SqmmX3 Core 30 Mtr Length, D clamp Tumble,Crane charges, Labour charges for Data Rate.Without Motor

Supplying & fixing of 30 Mtr Highmast accessories that include Winch Plate, 350 KG Winch, SS wire Rope 65 Mtr Length, Moulded Cable 4SqmmX3 Core 40 Mtr Length, D clamp Tumble, Crane charges, Labour charges for Data Rate.With 1 HP Motor

Supplying & fixing of 30 Mtr Highmast accessories that include Winch Plate, 350 KG Winch, SS wire Rope 65 Mtr Length, Moulded Cable 4SqmmX3 Core 40 Mtr Length, D clamp Tumble, Crane charges, Labour charges for Data Rate. Without Motor

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications.160 KVA / 128 kw

Supply, Erection, testing and commissioning of AMF panel suitable for 160 kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .A 4 pole contactor for alternatorwith thermal O/L relay,. A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic

Fabricating, supplying and erecting swaged tubular pole of hight 7.5 Mtr having three sections and providing two coats of red oxide paint and finished with two coats of enameled paint of approved quality and colour and M.S.Base plate of suitable size welded at the bottom of the pole (as per IS) and 40mm dia Gl / flexible PVC pipe of Mtr. Length fitted to the heavy gauge polycarbonate control box

Fabricating, supplying and erecting stepped / welded tubular pole of height 3.5 Mtr having three sections, and providing two coats of red oxide paint and finished with two coats of enameled paint of approved quality and colour. and M. S. Base plate of size 150 mm X 150 mmX 6mm thick welded at the bottom of the pole. 32mm dia GI/flexible PVC pipe of 1 mtr length fitted to the existing Polycarbonate box. control box 1 No. of 4 way connector in case of cable looping.

Supply and Installation/ Fixing/ Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent PolycarbonateLid, shockproof, IP65 (WeatherProof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase/ Three Phase Energy Meter insuitable base plate

Supplying and fixing of 4 No Flood light fixing GI ring type arm bracket. 42 mm OD, 2mm tickness pipe, 600 mm length, 50x5mm tickness plate for flood light fixing, 33 OD x 2mm tickness supporting pipes- 3 Nos, Header pipe 88.9 OD x 3 mm tickness x 250 mm length suiatable GI fastners.

Intelligent Light Monitoring System(ILMS) for Streetlights consisting of Supply and erection of single phase smart streetlight control and monitoring system to remotely control and monitor using web or mobile application Remote lighting management operating on Master control unit

Application Software for ILMS and Android application for Smart phone. The Application is based on a robust algorithm which updates all the parameters mentioned at specified intervals where each ILMS Unit can be monitored separately. Each ILMS Unit can be controlled through the Application either manually or can be set to autonomous control based on Astronomical clock.

Supplying and Installation of Intelligent single phase Centralised Control and monitoring system for Street lights, the CCMS unit should be capable of switching ON & OFF the lights of a particular switching or networked switching points from Central Control system automatically throughout the year on basis of sunrise & sunset time depending on the geographical location of the switching point. The CCMS communication Unit should be a GPRS or GSM

Supplying and Installation of Intelligent three phase Centralised Control and monitoring system for Street lights, the CCMS unit should be capable of switching ON & OFF the lights of a particular switching or networked switching points from Central Control system automatically throughout the year on basis of sunrise & sunset time depending on the geographical location of the switching point. The CCMS communication Unit should be a GPRS or GSM

Supply and Installation of Electronic Timer for streetlights consisting of Microcontroller based electronic timer with RTC, 2X16 LCD wit back light, 5 Tactile Keys

Remote control and monitoring of individual streetlight using LoRa communication technology A LoRa-based street lighting system utilizes LoRa (Long Range) communication technology to create a low-power, wide-area network (LPWAN) for the remote control and monitoring of streetlights. Each streetlight node is equipped with a microcontroller, a LoRa transceiver, and sensors such as LDRs or PIR for ambient light detection and motion sensing.

Servicing & maintaining of 3 KVA UPS system with battery for the Period of 1 year includes (i) inspection, diagnosis, component replacement, testing and validation of functional UPS units

Servicing & maintaining of 5 KVA UPS system with battery for the Period of 1 year includes (i) inspection, diagnosis, component replacement, testing and validation of functional UPS units.

Servicing & maintaining of 10 KVA UPS system with battery for the Period of 1 year includes (i) inspection, diagnosis, component replacement, testing and validation of functional UPS units.

Hire Charges for servicing maintaining of 2 Ton Split type Air Conditioner includes Fillling of Gas, Checking of electrical wiring connection for tightness. Straighten up to normal position coil fins using comp. Inspect compressor motors for proper operation. Lubricate shafts bearing and motors. Inspect fan for bent blade and correct as necessary

Hire Charges for servicing & maintaining of 3 Ton Cassette type Air Conditioner includes Fillling of Gas, Checking of electrical wiring connection for tightness. Straighten up to normal position coil fins using comp. Inspect compressor motors for proper operation. Lubricate shafts bearing and motors.Inspect fan for bent blade and correct as necessary

AMC Chagres for 63 to 100 KVA DG Set including a. Draining of Lubricating Oil sump, Clean Sump, Strainer, and Filter Gauge. b. Renewal of Lubricating Oil Filter Element. c. Refilling the sump with new Oil and Prime the Lubricating Oil system.d. Check and adjust Fan Belt Tension. e. Checking and Adjustment of Tappet Clearance. and other all material included

AMC Chagres for 125 to 160 KVA DG Set including a. Draining of Lubricating Oil sump, Clean Sump, Strainer, and Filter Gauge. b. Renewal of Lubricating Oil Filter Element. c. Refilling the sump with new Oil and Prime the Lubricating Oil system.d. Check and adjust Fan Belt Tension. e. Checking and Adjustment of Tappet Clearance. f. Checking and tightening Engine breather cap Screws. and all Materials inclueded

AMC Chagres for 180 to 200 KVA DG Set including a. Draining of Lubricating Oil sump, Clean Sump, Strainer, and Filter Gauge. b. Renewal of Lubricating Oil Filter Element. c. Refilling the sump with new Oil and Prime the Lubricating Oil system.d. Check and adjust Fan Belt Tension. e. Checking and Adjustment of Tappet Clearance. f. Checking and tightening Engine breather cap Screws. and all materials included

Releasing and Refixing of tubular/ octagonal/conical poles of height 5 Mtr to 10 Mtr Height. Including labour, Crane and transportation charges. (Excluding Foundation work)

Releasing and Refixing of 12/16/20 Mtr Polygon Highmast pole includes mechanical accessories and lighting arrestor,labour charges, hiring of Crane and transportation charges. (Excluding Foundation work)

Releasing and Refixing of 30 Mtr Polygon Highmast pole includes mechanical accessories and lighting arrestor,labour charges, hiring of Crane and transportation charges. (Excluding Foundation work)