Design, Supply, Erection, Testing & Commissioning of conversion work of existing 132kV S/C Haldarwa-Bharuch line into D/C from Loc no-21 to Bharuch Gantry with ACSR Panther conductor and 24F OPGW cable

Sr. No. Description of Works - SAC Code 9954 Estimated Cost in Rs.

PART-A Supply of Materials

Erection of line (Lattice towers)

Erection of line (Monopole towers)

TOTAL COST WITHOUT TAXES

Service of "Works Contracts" GST @ 18% (SAC 9954)

I am / we are willing to carry out this service package of works contract stated above at GST

18% (in figure) ______ % (in words _____ %) below / above the estimated TOTAL END COST for

all the items stated there in.

The amount of tender works out with above % (in figure) for TOTAL END COST Rs.

I / we confirm that our above quoted rates are ON firm price basis; except (i) Supply of Tower

Materials (Including Bolts-Nuts), (ii) Polygonal poles, (iii) Hardware & Accessories of conductor.

for which Price variation will be applicable.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and

better economical management and for the ease of Accountancy but the entire Contract, is to be

assessed under GST Law, as the Works Contract Service, which is, as per the provisions of Section 2(30),

read with, Section 2(119), further read with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or

SGST Act, 2017 and similar provisions, applicable under the UTGST Act, 2017and the IGST Act, 2017 and

the entire activity, would be subjected to levy of Tax, at the rate of 9% CGST + 9% SGST or 18% IGST,

under the GST Law. However, Classification Codes for different segments or portions of the Works

Contract, may be specified separately, in the Supplies, with a final common Classification Code of Works

Contract Service.

2) The Bidder is hereby conveyed that only SAC Code and Tax rate for supply of Service Works Contract

i.e. 18% is relavant for the purpose of contract since the contract is works contract and any separation in

the works is for better management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and

transparency purpose which shall have no bearing on price or taxation payment.

Signature of Authorized Representative of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

ACE(P&C)/Contract/E-491/TL/132kV/S&E

Estimated Cost - SUPPLY (For reference only)

Design, Supply, Erection, Testing & Commissioning of conversion work of existing 132kV S/C Haldarwa-Bharuch line into D/C from Loc no-21 to Bharuch Gantry with ACSR

Panther conductor and 24F OPGW cable

Length of line: 2.24 Rkm

Sr. No. Description of Supply with Detail Specification of HSN / SAC Unit Quantity Unit Rate Unit Freight, Unit FOR Unit Rate FOR Total Cost

Service Package - Works Contract (SAC Code 9954) code for Packing & Insurance in Rs. (Excl. GST)

identification Forwarding Charges in in Rs.

only charges Rs.

A Supply of Materials

A.1 Tower Materials

A.2 Supply of Monopole towers

A.2.1 132 kV D/C Monopole having 1 peak for OPGW (including

designing, Non-Destructive & Proto testing and supply)

Tentative ht. of Botom X arm- 24 mtr.

(Note - Qty. to be decided depending on design by

bidder) Qty/pole (MT)

(Note - Qty. to be decided depending on design by

bidder) Qty/Pole (MT)

A.2.2 132 kV D/C Monopole having 1 peak for OPGW (including

designing, Non-Destructive & Proto testing and supply)

Tentative ht. of Botom X arm- 42 mtr.

(Note - Qty. to be decided depending on design by

bidder) Qty/pole (MT)

(Note - Qty. to be decided depending on design by

bidder) Qty/Pole (MT)

A.3 ACSR Panther conductor kM 0.000 234904.00 2867.00 1229.00 239000.00 -

A.4 Silicone Rubber insulators - 132kV

Sr. No. Description of Supply with Detail Specification of HSN / SAC Unit Quantity Unit Rate Unit Freight, Unit FOR Unit Rate FOR Total Cost

Service Package - Works Contract (SAC Code 9954) code for Packing & Insurance in Rs. (Excl. GST)

identification Forwarding Charges in in Rs.

only charges Rs.

A.4.1 132kV,90kN - Suspension SRI Nos. 0 2250.00 42.00 18.00 2310.00 -

A.5 Insulator hardware for ACSR Panther conductor

A.5.1 Single suspension Nos. 0 1564.00 17.00 7.00 1588.00 -

A.5.2 Double suspension Nos. 0 4413.00 34.00 15.00 4462.00 -

A.5.3 Single Tension Nos. 30 2178.00 27.00 11.00 2216.00

A.5.4 Double tension Nos. 60 4945.00 51.00 22.00 5018.00

A.5.6 Mid span joint Nos. 8 695.00 6.00 3.00 704.00

A.5.7 Vibration damper Nos. 168 572.00 11.00 5.00 588.00

A.5.8 Repair sleeve Nos. 1 252.00 6.00 3.00 261.00

A.6 OPGW - 24 Fibre

A.6.1 24 Fibre (DWSM) OPGW fibre Optic cable Km 2.240 145356.00 1999.00 857.00 148212.00

A.6.2 Installation Hardware set * & accessories for above OPGW Km 2.240 45351.00 502.00 215.00 46068.00

i.e. all cable fittings & accessories like suspension clamps,

tension clamps, vibration dampers, earthing clamps, down

lead clamps, in-line splice enclosures etc. including; Pigtails

a) Fibre Optic Approach Cable -

400 Mtrs - For 220KV S/S &

500 Mtrs - For 400KV S/S

(with installation hardware like ties/ clips / cleats, conduits,

ducts, supports, fittings, accessories etc).

(Any variation in quantities shall be absorbed by contractor)

TOTAL COST FOR MATERIALS

Service of "Works Contracts" GST @ 18% (SAC 9954)

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better economical management and for the ease of Accountancy but

the entire Contract, is to be assessed under GST Law, as the Works Contract Service, which is, as per the provisions of Section 2(30), read with, Section 2(119), further read

with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and similar provisions, applicable under the UTGST Act, 2017and the IGST Act, 2017 and

the entire activity, would be subjected to levy of Tax, at the rate of 9% CGST + 9% SGST or 18% IGST, under the GST Law. However, Classification Codes for different

segments or portions of the Works Contract, may be specified separately, in the Supplies, with a final common Classification Code of Works Contract Service.

Sr. No. Description of Supply with Detail Specification of HSN / SAC Unit Quantity Unit Rate Unit Freight, Unit FOR Unit Rate FOR Total Cost

Service Package - Works Contract (SAC Code 9954) code for Packing & Insurance in Rs. (Excl. GST)

identification Forwarding Charges in in Rs.

only charges Rs.

2) The Bidder is hereby conveyed that only only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is relevant for the purpose of contract since the contract

is works contract and any separation in the works is for better management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency purpose which shall have no bearing on price or taxation

Signature of Authorized Representative

of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

ACE(P&C)/Contract/E-491/TL/132kV/S&E

Estimated Cost - Erection (For reference only)

SCHEDULE - 01 (132KV D/C Lattice Towers)

Design, Supply, Erection, Testing & Commissioning of conversion work of existing 132kV S/C Haldarwa-Bharuch line into D/C from Loc no-21

to Bharuch Gantry with ACSR Panther conductor and 24F OPGW cable

Length of line: 2.24 Rkm

Erection of line

S.N. Description of Supply with Detail Specification of Service HSN/ SAC Unit Quantity Unit Rate Total Cost

Package - Works Contract (SAC Code 9954) in Rs. (Excl. GST)

1 Check survey including detailed survey, preparation of profiles KM 2.240 9277.00

and revision in original route alignment, if any and as per

instruction of EIC

2 Excavation excluding back filling, but including shoring, -

shuttering, dewatering, tree cutting for tower footings etc. for:-

a) Normal soil either dry or wet/Sandy soil CMT 77.630 307.00

b) Black Cotton Soil either dry or wet CMT 310.520 614.00

c) Normal submerged / marine soil where dewatering is CMT 0.000 484.00 -

d) Black cotton submerged / marine soil / marshy soil where CMT 0.000 703.00 -

dewatering is necessary

e) Soft Rock CMT 0.000 1066.00 -

f) Hard Rock CMT 0.000 2212.00 -

3 Installation of steel reinforcement in concrete foundation MT 0.891 99900.00

including supply of M. S. bars, binding wire and their

cutting, bending, binding and laying in position as per

4 Stub-setting with prop or template including back-filling but MT 3.383 8206.00

excluding excavation and concreting etc. for all type of

tower/extensions except special towers. (Weight of stub,cleat &

templete with Bolt & Nuts of Stub & templete shall be counted)

up to 6 mtr extension

5 ---- Do ---- +9 to +25 mtr extension MT 0.000 9918.00 -

6 Stub-setting and/OR Anchor bolt-setting of River crossing tower MT 0.000 47059.00 -

/ 25 mtr. and above extension back filling but excluding

excavation and concreting.

7 Concreting of foundation by M25 / M20 / M15 mixture -

including shoring, shuttering, dewatering etc. for normal

tower/tower with extension upto 25 mtr. (Rates are with

8 Grounding of towers with pipe type earthing including Set. 7.000 8985.00

excavation and back filling and supply of all materials like 32mm

dia heavy duty 3 mtr.long G.I. Pipe & 50 x 6 mm G.I. flat, bolt-

nuts, salt, coal/charcoal etc. as per drawing.

9 Grounding of towers with COUNTER POISE TYPE including Set. 0.000 15756.00 -

excavation and back-filling and supply of all materials like GSS

wire, lugs, bolt-nuts, salt, coke/charcoal as per drawing.

S.N. Description of Supply with Detail Specification of Service HSN/ SAC Unit Quantity Unit Rate Total Cost

Package - Works Contract (SAC Code 9954) in Rs. (Excl. GST)

10 Erection of super structure upto 6 meter extension including MT 20.386 10076.00

tree cutting, fixing of tower accessories, attachments except

ACD /DP /NP /CIP /PP and excluding tack welding of bolts. This

includes taking delivery of tower materials and bolt-nuts from

Board's stores etc. for normal, extension & special towers at

destination and keeping them in safe custody and transporting

the same to erection site

11 Same as above but erection of 9/12/15/18/21/25 mtr. Extention MT 0.000 12694.00 -

12 Fixing of Anti-climbing devices including supply of barbed wire Loc. 7.000 3011.00

13 Fixing of DP / NP / PP / CIP including supply of plates and Loc. 7.000 3379.00

supply of G.I. bolt-nuts & tack welding as per drawings.

14 Tack welding of nuts upto approx. 10 mtrs. Height OR two Per Bolt 1500.000 15.00

bottom-most panel from ground level at three places on the nuts

diametrically and applying zinc rich paint immediately after tack

15 Stringing of ACSR Panther - 6 (Six) conductors for double RKM 2.240 112928.00

circuit including laying, jointing, tensioning, clamping with

armour rods, hoisting of insulator string, fixing of jumpers,

dampers etc. & with required tree cutting on entire length for

adequate clearance/safe charging of line

16 Complete installation of OPGW cable (24 F) including laying, KM 2.240 97193.00

providing required hardwares in line splices to be encased in

Fibre Optic Splice Enclosures, Laying and Termination of a fibre

optic approach cable required to connect Overhead Fibre Optic

Cable (OPGW) between the final in line splice enclosure on the

gantry/tower and the Fibre Optic Distribution Panel (FODP) to

be installed within the building at both the substation ends as

per technical specification

17 Link up of OPGW cable (24 F) including all related activities KM 2.240 8850.00

18 Dismantling of conductors and line materials of existing line RKM 2.230 33506.00

with 132kV ACSR Panther 3 conductors (S/C) cold condition

including transportation and crediting to nearest GETCO store

as per instruction of Engineer-in-Charge

19 Dismantling of one earth wire and earth wire hardware / RKM 2.230 9985.00

material of existing 132KV line in cold condition including

transportation and crediting to nearest GETCO store as per

instruction of Engineer-in-Charge

20 Dismantling of any type of tower including transportation and MT 18.549 8434.00

crediting to nearest Board's store as per instruction of Engineer

21 Cutting of Stub of Old tower to be dismatled including Per Tower 7.000 12618.00

breaking of Chimney/cutting of RCC up to 450mm below ground

level and credting stubs and steel bars to GETCO store

including back filling and levelling of site.

22 Painting of name of line, location number, colour code and Per Location 3.000 431.00

telephone number on tower (all four legs) for information of

concerned substation including supply of paints, etc.

TOTAL SCHEDULE-01 OF PART-B

S.N. Description of Supply with Detail Specification of Service HSN/ SAC Unit Quantity Unit Rate Total Cost

Package - Works Contract (SAC Code 9954) in Rs. (Excl. GST)

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL SCHEDULE-01 INCLUDING GST @18%

1) While calculating the weight of stub-setting, the weight of stub, cleat & templetes shall also be added in stub weight

2) Red oxide & zinc rich paint shall be applied after tack welding of nuts.

3) The above rates are with supply of cement by the contractor.

4) The rate indicated above includes taking delivery of all stringing materials from Board / Contractor store at destination keeping them in safe

custody and transporting the same to erection site.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better economical management and for

the ease of Accountancy but the entire Contract, is to be assessed under GST Law, as the Works Contract Service, which is, as per the provisions

of Section 2(30), read with, Section 2(119), further read with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and

similar provisions, applicable under the UTGST Act, 2017and the IGST Act, 2017 and the entire activity, would be subjected to levy of Tax, at the

rate of 9% CGST + 9% SGST or 18% IGST, under the GST Law. However, Classification Codes for different segments or portions of the Works

Contract, may be specified separately, in the Supplies, with a final common Classification Code of Works Contract Service.

2) The Bidder is hereby conveyed that only only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is relavant for the purpose

of contract since the contract is works contract and any separation in the works is for better management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency purpose which shall have no

bearing on price or taxation payment.

Signature of Authorized Representative

of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

ACE(P&C)/Contract/E-491/TL/132kV/S&E

Estimated Cost - Erection (For reference only)

SCHEDULE - 02 (132KV D/C Monopole Towers)

Design, Supply, Erection, Testing & Commissioning of conversion work of existing 132kV S/C Haldarwa-Bharuch line into D/C from Loc no-21

to Bharuch Gantry with ACSR Panther conductor and 24F OPGW cable

Length of line: 2.24 Rkm

Erection of line

S.N. Description of Supply with Detail Specification of Service HSN/ SAC Unit Quantity Unit Rate Total Cost

Package - Works Contract (SAC Code 9954) in Rs. (Excl. GST)

1 Construction of Caisson foundation for Monopole CMT 104.000 20025.00

having Tentative ht. of Botom X arm- 24 mtr. (Including

Excavation, Piling, reinforcement, setting of monopole

template, fixing of foundation bolts, concreting backfilling

etc) for all type of 132 kV Double Circuit Monopoles where

ever required including supply of cement, dewatering,

shuttering, forming & curing including cost of

reinforcement bars

with M25 mix concrete.

(Total 2 nos. of locations)

Note - Qty. to be decided depending on design by

2 Construction of Caisson foundation for Monopole CMT 126.000 20025.00

having Tentative ht. of Botom X arm- 42 mtr. (Including

Excavation, Piling, reinforcement, setting of monopole

template, fixing of foundation bolts, concreting backfilling

etc) for all type of 132 kV Double Circuit Monopoles where

ever required including supply of cement, dewatering,

shuttering, forming & curing including cost of

reinforcement bars

with M25 mix concrete.

(Total 2 nos. of locations)

Note - Qty. to be decided depending on design by

3 Erection of monopoles with complete bolts and nuts, MT 106.950 19622.83

Fixing with foundation including nut bolt, base plate etc.

(Total 4 nos. of locations)

Note - Qty. to be decided depending on design by

4 Tack welding of nuts upto approx. 10 mtrs. Height OR Per Bolt 600.000 21.85

two bottom-most panel from ground level at three places

on the nuts diametrically and applying zinc rich paint

immediately after tack welding.

Note - Qty. to be decided depending on design by

TOTAL SCHEDULE-02 OF PART-B

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL SCHEDULE-02 INCLUDING GST @18%

1) While calculating the weight of stub-setting, the weight of stub, cleat & templetes shall also be added in stub weight

S.N. Description of Supply with Detail Specification of Service HSN/ SAC Unit Quantity Unit Rate Total Cost

Package - Works Contract (SAC Code 9954) in Rs. (Excl. GST)

2) Red oxide & zinc rich paint shall be applied after tack welding of nuts.

3) The above rates are with supply of cement by the contractor.

4) The rate indicated above includes taking delivery of all stringing materials from Board / Contractor store at destination keeping them in safe

custody and transporting the same to erection site.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better economical management and for

the ease of Accountancy but the entire Contract, is to be assessed under GST Law, as the Works Contract Service, which is, as per the provisions

of Section 2(30), read with, Section 2(119), further read with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and

similar provisions, applicable under the UTGST Act, 2017and the IGST Act, 2017 and the entire activity, would be subjected to levy of Tax, at the

rate of 9% CGST + 9% SGST or 18% IGST, under the GST Law. However, Classification Codes for different segments or portions of the Works

Contract, may be specified separately, in the Supplies, with a final common Classification Code of Works Contract Service.

2) The Bidder is hereby conveyed that only only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is relavant for the purpose

of contract since the contract is works contract and any separation in the works is for better management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency purpose which shall have no

bearing on price or taxation payment.

Signature of Authorized Representative

of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company