REPAIR TO ROAD DIVIDER, PAINTING AND RESURFACING INCL ROAD FURNITURE IN DOMESTIC AREA AT AFS PHALODI

M&L to repair to pot holes any depth, n.exc 1 Sqm each incuding sweeping free from dust and mud, or water ,scoring sunken surfaces in road , paths etc, cutting around is to atleast 30 mm in depth making good appluing tack coat @5 kg per 10 sqm , putting in premix as specified for thin bitumenous carpet (2 cm thick) well rammed and seal with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand ), again well rammed (including supplying of premix binder and sand ) depth of pot holes complete all as specified and directed.

M&L ffor preparing old black top surfaces by brushing with wire brushes for removing any mud etc sweeping with brooms and finally fanning the surface with gunny bags/ compressor blower to remove all loose dust/ dirt complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminious primer using bitumen VG-10 grade @ 5kg per 10 Sqm using mechanical sprayer on old black top surface complete all as specified and directed .

M & L laying bituminous VG-30 premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content of VG-30 grade paving by weight of total mix laid by self propelled mechanical paver and rolled and compacted to required camber and gradient complete all as specified and directed.

Demolition of brick or stone/ boulder masonary, built in cement mortar complete all as specified and directed.

M&L Precast cement concrete type C1(1:3:6) (20 mm graded aggregate) block masonry with solid blocks exc. 10 cm in width and setting in cement mortar1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed.

M&L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement.

M&L two coats of synthetic enamel paint (ordinary tint) on plastered surfaces of any description over 10 cm width or girth, not otherwise described over a coat of priming coat plaster coat including preparation of new steel surface complete all as specified and directed.

M&L one coat of synthetic enamel paint (ordinary tint) on plastered surfaces of any description on old painted surfaces over 10cm width or girth including preparation of old surfaces complete all as specified and directed.