Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 LAccepted-AOC | L1 | Accepted-AOC Agreement executed |
| Sl No | Description | Qty | Unit | DEMOCRATIC LABOUR CONTRACT & CONSTRUCTION CO OP SOCIETY LTD D 3001 L1 |
|---|---|---|---|---|
| 1.00appendix a | ||||
| 1.00 | OD158508/2024-2025:Table with side partition and keyboard sliding platform for online examination hall (Two nos workstation facing each other) Table: 75cm x 45cm x 75cm (L x W x H)Side partition between 2 candidates and 2 rows: 45cm x 45cm using 25mm thickness engineered wood with 90 GSM premium lamination for side partition and table top and 17mm thickness engineered wood with 90 GSM premium lamination for slider platform board both conforming to IS 12823 : 2015 and IS 3087 : 2005 (Reaffirmed 2010) including L clamp 20mm, Mini fix (Ebco/Equivalent), Edge band : 25mm x 2mm thickness & 20mm x 0.8mm thickness (Rahau/Equivalent), Leg bush with 20mm leg bush screw, Keyboard slider (Ebco/Equivalent),
Screws for L clamp and Slider fixing (Ebco/Equivalent), Cable organizer (Ebco/Equivalent) & Draw fixing screws including labour charges for edge banding in all exposed edges with through feed automatic edge band machine and including all cutting, drilling & assembling charges etc, for the table unit. | 60 | each | 12,255.95 ₹7,35,357 Lowest |
| 1.00 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) | 385.8 | kg | 541.3 ₹2,08,833.54 Lowest |
| 1.00 | 9.156.2:Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both dide exterior Grade-I MDF Board 18 mm thick confirming to IS:14587. | 28.29 | sqm | 1,277.8 ₹36,151.52 Lowest |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 28.29 | sqm | 1,162.87 ₹32,899.92 Lowest |
| 1.00 | 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). | 61.73 | kg | 639.53 ₹39,476.91 Lowest |
| 1.01 | 11.33.1:25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with:Second class teak wood | 17.12 | sqm | 4,775.57 ₹81,757.76 Lowest |
| 1.01 | 10.25.1:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete | 205.44 | kg | 116.61 ₹23,956.36 Lowest |
| 1.01 | OD167931/2024-2025:Providing and fixing 4 mm thick ACP board in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge. | 2.88 | sqm | 2,061.7 ₹5,937.7 Lowest |
| 1.01 | OD167945/2024-2025:Providing stainless steel Floor spring for glass door shutters including cost of materials etc complete | 2 | each | 5,174.48 ₹10,348.96 Lowest |
Tender Value
₹11.9 L
EMD Value
₹29,665
Closing Date
18 Jun 2025, 3:00 pmClosed
Exeutive Engineer
PWD,Buildings Division,Kozhikode
General Civil Work
2025_PWD_765971_2
17/EEBK/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Vadakara
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
Yes
₹29,665
Yes
15 Oct 2025
10 Jun 2025
20 Jun 2025
10 Jun 2025
18 Jun 2025
10 Jun 2025
Amount
appendix a
OD158508/2024-2025:Table with side partition and keyboard sliding platform for online examination hall (Two nos workstation facing each other) Table: 75cm x 45cm x 75cm (L x W x H)Side partition between 2 candidates and 2 rows: 45cm x 45cm using 25mm thickness engineered wood with 90 GSM premium lamination for side partition and table top and 17mm thickness engineered wood with 90 GSM premium lamination for slider platform board both conforming to IS 12823 : 2015 and IS 3087 : 2005 (Reaffirmed 2010) including L clamp 20mm, Mini fix (Ebco/Equivalent), Edge band : 25mm x 2mm thickness & 20mm x 0.8mm thickness (Rahau/Equivalent), Leg bush with 20mm leg bush screw, Keyboard slider (Ebco/Equivalent), Screws for L clamp and Slider fixing (Ebco/Equivalent), Cable organizer (Ebco/Equivalent) & Draw fixing screws including labour charges for edge banding in all exposed edges with through feed automatic edge band machine and including all cutting, drilling & assembling charges etc, for the table unit.
21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )
9.156.2:Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both dide exterior Grade-I MDF Board 18 mm thick confirming to IS:14587.
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
11.33.1:25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with:Second class teak wood
10.25.1:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
OD167931/2024-2025:Providing and fixing 4 mm thick ACP board in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.
OD167945/2024-2025:Providing stainless steel Floor spring for glass door shutters including cost of materials etc complete
Bidder Name
DEMOCRATIC LABOUR CONTRACT & CONSTRUCTION CO OP SOCIETY LTD D 3001
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1253565.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .