Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.1 L+₹54,387 (5.17%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹10.7 L
EMD Value
₹21,400
Closing Date
19 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Jamanagar No1
GE AF Jamanagar No1 361003
PROVN OF CERTAIN BR AND EM WORKS AT SARMAT RANGE UNDER AF STATION JAMNAGAR
2022_MES_569656_1
8199/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Jamangar
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE AF Jamanagar No1
₹21,400
Yes
30 Jan 2023
17 Dec 2022
21 Jan 2023
17 Dec 2022
19 Jan 2023
31 Dec 2022
Amount
Surface dressing n exc 15 cm deep in soft / loose soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / disintegrated rock.
M&L Cement concrete 1:4:8 Type D2 (using 40mm graded stone aggregates) in foundations, filling and mass concrete
M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete
M&LReinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses
S&F CRS Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for Rough finished surfaces of concrete
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railingsand similar work including attached pillasters, uttresses, etc.; vertical or to batter for Rough finished surfaces of concrete
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, soft / loose soil.
Removing excavated material (soil) exc. 250 m but n exc. 500 m and depositing where directed
Removing excavated material (rocks) exc. 250 m but n exc. 500 m and depositing where directed
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L Hardcore (Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
100mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub floos, sub bases, floos and pavings, etc.
100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floos and pavings, etc. including finishing cement concrete surface even and smooth Without using extra cement and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green
Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces specified and as directed.
Preparing wall surfaces plastered or unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / loose soil.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / disintegrated rock.
Cement concrete 1:2:4 Type B1 (using 20mm graded stone aggregates) in foundations, filling and mass concrete
S&F Mild Steel Work in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long (5 to 10 dia of neck)
S&F Mild steel round bars Fe 290 (Gde - E-165) 10mm dia and over, cut to length, bent to shape required, as in strengthening bars for chain link fencing and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire
Supply only Chain link MS galvanisd fencing, conforming to IS 2721:2003 including line wires of 4mm dia, any size or type
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Preparation of new or previously untreated Steel Surfaces of any description, over 10cm in width or girth,not otherwise described ; Priming with red oxide zinc chrome ; applying two coats of synthetic enamel paint.
S&F galvanised concertina coil of 750mm dia made of 0.5mm thick 19mm wide strip and 2.59 mm dia high tensile wire 125 Nos of clips, having 56 Nos of circles and covering 8 to 10 running metre and 'S' clips as per spiral using central core of high tensile wire around which a tape of razor sharp bars is machine crimed, all as specifierd and as diected.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil.
75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub floos, sub bases, floos and pavings, etc.
75mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floos and pavings, etc. including finishing cement concrete surface even and smooth Without using extra cement.
M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.
M&L for cement concrete (1:2:4)type B0 using (using 12.5 mm graded stone aggregate)as in coping and the like including weathering,slightly round or chamfered angles and throating as directed and including necessary use and waste of formwork all as specified and as directed by Engr in charge.
Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m
Removing excavated material (rock) n exc. 50m and depositing where directed at a level n exc. 1.5 m
M&LReinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)in Columns, pillars, piers, posts and struts
Formwork to sides of pillars, posts, struts, piers, columns and stanchions (Square, rectangular on plan or polygonal for Rough finished surfaces of concrete
CRS Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Rolled Mild Steel Fe- 290(Gde E- 165)Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm highusing synthetic enamel paint.
M&L for fabrication and errecting of sign board of size 1200mm x 500mm (size of aluminium composite panel), erect in position as detailed hereunder and as directed :- (a) Main post shall be of 2 Nos of Stainless steel 316 grade pipe 50mm bore, 1.5mm thick, 2.1m long (1.8m above ground level and 0.3m below). (b) Frame around aluminium sheet shall be fabricated with 25mm stainless steel square tube with 1.5mm thick wall thickness, including fixing arrangement for aluminium sheet and for welding on main post. (c) 3mm thick aluminium composite panel board consisting of 2mm thick mineral core sandwitched between two aluminium sheets (0.5mm thick each). The aluminium composite panel shall be coil coated with kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer...
..(service coating on other face fixed over on frame as mentioned at Sl No (b) above. Make :- Armstrong or equivalent as approved by GE. (d) providing both sides of aluminium sheet high intensity prismatic grade retro reflective sheeting as base and with out massage ( legend borders, letter numbers, site map, etc., as per design and pattern approved) with high intensity prismatic grade retro reflective sheeting pasting as per manufacturers instructions. Make of sheet shall be 3m or equivalent as approved by GE. (e) Excavating 2 Nos post holes of size 300x300x450mm in any type of soil and fixing post and filled with PCC 1:2:4 type B1 using 20mm graded stone aggregate, removing surplus soil to distance not exc 50 meter and site clearance as per Satisfaction of Engr-in-Charge, Note Stainless steel Section mentioned above shall be of grade 316.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 sqmm 4 core all as specified and directed.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core all as specified and directed.
Supply, installation, testing and commissioning of electric siren, hosrizontal type, double mounting, three phase, 400/ 440 volts, 50 Hzs, AC, 1HP motor, audible range not less than 1.5Km, fixed in position and connecting complete of Make Kheraj Model No HDT-150 or equivalent as approved
M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed. (Note: Work shall be executed as per clause 19.75 of standard schedule of rates part-1 (2009) for measurement purpose thickness of sand after punning down will be considered.)
Supply & lay ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV, flat size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable all as specified and directed.
S&F MCB, TPN, 63 Amps., 415 volts, 'C' curve, fixed in sheet metal board, all as directed.
S&F Sheet metal enclosures for DBs when MCBs to be used, Single pole and neutral, 8 way, double door, with 200Amps rated copper bus bars.
Supply and errecting steel tubular swaged poles 5 metre long complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (8.5 metres long); including applying two coats of aluminium painting over a coat of red oxide pimer and bituminous coating at bottom portion ie. coping and reflective painting all as directed by Engineer in charge.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sqmm 2 core all as specified and directed.
S&F in replacement of LED flood Light fitting 30 Watt, system efficiency not less than 115 lumen / watt, IP 65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete.
S&F LED Aviation obstruction light fitting die cast aluminium alloy housing, heat resistant, clear thick glass and accessories with LED chips & driver, fixed in position & connecting complete make:- cat log BGAV 302 LED of Bajaj or equivalent OF MAKES WIPRO/ PHILIPS/ C&S / GEC
S&F Bell push, flush type, 5 amp
S&F 3 Pole 18 Amp power contactor, AC 3 rating, with one NO add On, fixed in existing panel & connecting complete all as specified & directed. Make : - SIEMENS/LARSEN & TUBRO/LEGRAND/ SCHNEIDER/HAVELLS India LTD/C & S ELECTRIC LIMITED (C&S) / CROMPTON GREAVES/GE/ABB/HPC
M/S Rajendra Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .