CONSTRUCTION OF RAJEV GHANDI GOVT MODLE DAY BOARDING SCHOOL AT GOVT SENOIR SECONDARY SCHOLL DHALIARA TEHSIL DEHRA DISTT KANGRA H.P

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as per direction of Engineer-in-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all excavated earth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying chemical emulsion in sealed containers including delivery as specified Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (Twenty percent) including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm at the rate seven point five litre per square metre of the vertical surface of the substructure to a depth of 300mm (Three hundred millimetre) including excavation channel along the wall & rodding etcetera complete. With Chlorpyriphos/ Lindane E.C. 20% (Twenty percent) with 1% (One percent) concentration complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Treatment of soil under floors using chemical emulsion @ one litre per hole, 300mm (Three hundred millimetre) apart including drilling 12mm (Twelve millimetre) diameter holes and plugging with cement mortar 1 :2 (One cement isto two Coarse sand) to match the existing floor : With Chlorpyriphos/ Lindane E.C. 20% (Twenty percent) with 1% (One percent) concentration complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and filling in plinth with stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:2:4 (One cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering, All work upto plinth level including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 (One cement isto four coarse sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering, All work upto plinth level including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:5:10 (One cement isto five coarse sand isto tengraded stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering, All work upto plinth level including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Making plinth protection 50mm (Fifty millimetre) thick of cement concrete 1:3:6 (One cement isto three coarse sand (zone- III) isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) over 75mm (Seventy five millimetre) thick bed of dry brick ballast 40mm (Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing & finishing the top smooth including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Synthetic Polyester triangular fibre of length 12mm, (Twelve millimetre) effective diameter 10-40 microns andspecific gravity of 1.37 (one point thirty seven) in cement concrete / RCC / Flooring / water retaining structures by using 125gms of synthetic Polyester triangular fibre for 50 Kg (Fifty kilogram) cement used including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etcetra with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Suspended floors, roofs, landings, balconies and access platform, and the like floor, etcetra up to any thickness, up to all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera complete as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Stair cases (except spiral stair cases) with slopping or stepped soffits excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Cornices and mouldings including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing tor steel reinforcement of Jindal Panther/Tata/Sail for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-550D or more etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and filling in position, blown bitumen in expansion joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in position 12mm (Twelve millimetre) thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetre) wide Aluminium fluted strips 3.15mm (Three point one five millimetre) thick sheet covering over expansion joints with iron screws as per design complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, in all work upto plinth level using minimum cement content not less that 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing completed and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead, lift and other incitental as per specification approved drawing designand as per direction of Engineer-in-charge.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, up to floor all level using minimum cement content not less that 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing completed and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead, lift and other incitental as per specification approved drawing designand as per direction of Engineer-in-charge.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level in all shapes and sizes in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in Cement mortar 1:4 (One cement isto Four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and placing in position 2 Nos (Two numbers) 6mm (Six millimetre) dia M.S. bars at every third course of half brick masonry complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 18mm (Eighteen millimetre) thick granite of any colour and shade area of slab upto 0.50 Sqm gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps, pantary / under counter wash basin and water trough, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 18mm (Eighteen millimetre) thick granite of any colour and shade area of slab over 0.50 Sqm gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps, pantary / under counter wash basin and water trough, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing edge moulding to 18mm (Eighteen millimetre) thick Granite work marble stone counters, Vanities etcetera, including machine polishing to edge to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite stone work, including necessary holes for pillar taps etcetra including moulding, rubbing and polishing of cut edges etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Granite Stone slab of approved shade with table rubbed, edges rounded and polished, of size 75x50cm (Seventy five into fifty centimatre) deep and 1.8cm (One point eight centimatre) thick, fixed in urinal partitions by cutting achase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete1:2:4 (One cement isto two coarses and isto four graded stone aggregate 6mm (Six millimetre) nominal size and finished smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugso dash fastener shall be paid for separately). complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Kiln seasoned and chemically treated hollock wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugso dash fastener shall be paid for separately). complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Fixing 1.00mm (one point zero zero millimetre) thick decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing lipping with 2nd (Second) class teak wood battens 25mm (Twenty five millimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Rectangular or squar vision panel area not exceeding 0.1 Sqm (Zero point one square metre) in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Cutting rebate in flush door shutters (Total area of the shutter to be measured) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etcetera 2nd (Second) class teak wood 50x12mm (Fifty into twelve millimetre) complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing 40x5mm (Forty into five millimetre) flat iron hold fast 40cm (Forty centimetre) long including fixing to frame with10mm (Ten millimetre) dia meter bolts,nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (One cement isto three coarse sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) complete as per specification,drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into ten millimeters) bright finished brass tower bolts (Barrel type) with screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 200x10mm (Two hundred into ten millimeters) bright finished brass tower bolts (Barrel type) with screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing bright finished brass 100mm (One hundred millimetre) mortice latch and lock with 6 (Six) levers and a pair of lever handles of approved quality with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80kg (Thirty six kiligram to Eighty kilogram) and door width from 701mm to 1000mm), (Seven hundred one millimetre to ten hundred millimetre) with double speed adjustment with necessary accessories and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 125x75x4mm (One hundred twenty five into seventy five into four millimetre) ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 100x75x4mm (One hundred into seventy five into four millimetre) ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing frame work for partitions/wall lining etcetera made of 50x50x1.6mm (Fifty into fifty into one point six millimetre) hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60cm (at the rate Sixty centimetre) centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/ floors with steel dash fasteners of 8mm (Eight millimetre) diametre, 75mm (Seventy five millimetre) long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etcetra, including providing with two coats of approved steel primer etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Steel work Tata/Sail / Reliance/ Jindal welded in built up sections, trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etcetera as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government.

Steel work welded in built up sections framed work, including cutting, fixing, lifting, hoisting and placing in position complete in gratings, frames, guard bars, ladder, railings, brackets, gates and similar works and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of GST, Toll Tax Sales tax or any other taxes imposed by the Government:- In gratings, framed guard bars, ladders, railing, brackets and similar works ceiling frames etcetra.

Providing and laying 40mm (forty millimeter) thick cement concrete flooring 1:2:4 (One cement isto two sand isto four graded stone. aggregate 20mm (Twenty millimetre) nominal size) laid one layer finished with a floating coat of neat cement. including preparation of surface grading complete and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 10mm (Ten millimeter) thick acid proof/Alkali resistant tiles of Jonson/Somany/ Kajaria size 300x300mm (Three hundred into three hundred millimeter) of required shade in flooring laid over 20mm (Twenty millimeter) thick cement mortar 1:4 (one cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles up to all floor level, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying 10mm (Ten millimeter) thick acid proof/Alkali resistant tiles of Jonson/Somany/ Kajaria size 300x300mm (Three hundred into three hundred millimeter) of required shade in skirting risers of steps and dados laid over 10mm (Ten millimeter) thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles up to all floor level, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in flooring laid on 20mm (Twenty millimetre) (average) thick cement mortar 1:4 (One cement isto four coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) (average) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Ist quality 300x450 mm (Three hundered into four hundered fifty millimetres) rectified Glazed Ceramic tiles of Kajaria/ Johnson /Orient & Bell/ AGL/ Somany/ Nitco conforming to sqm IS : 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in male and Femle toilet over 12mm (Twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing Ist quality 300x600mm (Three hundered into six hundered millimetres) rectified Glazed Ceramic tiles of Kajaria/ Johnson / Orient & Bell/ AGL/ Somany/ Nitco conforming to sqm IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in male and Femle toilet wall tiles over 12mm (Twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying 300x300mm (Three hundred into three hundred millimetre) antiskid Ceramic Tiles of Nitco/ Kajaria/ Johnson /AGL / Somany/ Orient Bell in flooring laid over 20mm (Twenty millimeters) thick Cement mortar 1:4 (One cement isto four coarse sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the Government.

Providing and laying Double Charge / Ultra Charge Vitrified tiles of Restile/Johnson/ Nitco/Kajaria / AGL / Simpolo /Somany/Orient & Bell as per approved shade and design of the office Size of Tile 600x600mm sqm (Six hundred into six hundred millimetres) size (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in flooring, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Double Charge / Ultra Charge Vitrified tiles of Restile/Johnson/ Nitco/Kajaria / AGL / Simpolo /Somany/Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) size (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Double Charge Vitrified tiles in different size of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Double Charge Vitrified tiles (Terrazo finish) in different size of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Double Charge Vitrified tiles (Terrazo finish) in different size of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dedo over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 400x400mm (Four hundred into four hundred millimeter) Precast labrador design (rainbow series) tiles of NTC/Unistone/ Atlantic with graded marble chips upto 12mm (Twelve millimetre), of approved shade in flooring/ treads of steps etcetera laid on a bed of 20mm (Twenty millimeter) thick cement mortar 1:4 (one cement isto four sand) and jointed with cement slurry as required up to all floor level, complete as per HPPWD specifications and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying 18mm (Eighteen millimetre) thick Chima Pink / Grey Granite stone flooring in combonation with Lakha red granite/ Black Granite as per pattern and detail laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, Semi /Round Nosing, edging and moulding wherever required etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Installing SPC wooden texture flooring of size as indicated in drawing fixed nail down with tongue and groove joint, with 5mm (Five millimetre) foom sheet including adhesive profilies, T.s skirting moulding beading at wall complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying (LVT Flooring) 5mm (Five millimetre) thick Luxury vinyl flooring over bare raised floor surface to proper level, line including joint treatment, complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Sports Vinyl Flooring over existing floor surface to proper level, line including joint treatment, complete as per approved Specifications & detail drawing & Architect's instruction. Low VOC Level Acrylic Based Adhesive as per the leed certification complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Laying 8mm (Eight millimetre) thick Carpet Flooring of welspun or its equivalent weight not less than 3Kg (Three kilogram per square metre) with the help of adhesive of approved make over 2mm (Two millimetre) thick base foam including all fixing arrangement complete. Base rate of Carpet flooring complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine / Reliance / Jindal Steel over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required as per specification, drawing and design and specifications.and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing factory made ridges or hips having proper gola shape 60cm (Sixty millimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating of Tata / Sail / Reliance / Jindals steels i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete as per approved drawing, design and specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine /Sail /Reliance /Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetre) thick multipurpose plain Cement fiber board as per IS: 14276 (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etcetra complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing false ceiling at all height 12.5 mm (Twelve point five millimetre) thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) (Board with BIS certification marks) including providing and fixing of frame work made of special sections, power pressed from M.S. sheet sand galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm (Twenty five millimetre) wide x1.6mm (One point six millimetre) thick with flanges of 27mm (Twenty seven millimetre) and 37mm (Thirty seven millimetre), at 1200mm (Twelve hundred millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.channels 45x15x0.9mm running at the spacing of 1200mm (Twelve hundred millimetre) centre to centre, towhich the ceiling section 0.5mm (Zero point five millimetre) thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mmthick27mm high having flanges of 20 mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm (Four hundred fifty millimetre) centre,with 25mm (Twenty five millimetre) long dry wall screws @ 230mm (at the rate two hundred thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channelwith the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm (One hundred fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and Fixing of Metal Galvanized Steel PLAIN metal ceiling System consisting of 600x600mm (Six hundred into six hundred millimetre) tiles of galvanized steel in 0.5mm (Zero point five millimetre) thickness inpowder coated Global White color of 60-80microns painted to aminimum of 120 gsm (both sides combined) galvanizing to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm & 600mm (Twelve hundred millimetre and six hundred millimetre) Cross Tees. The tiles shall be inmodule size of 600x600/600x1200/300x1200mm, suitable for Green Building application, with Recycled content of 25%. The grid should be of 15mm wide T- section flanges color white having rotary stitching on all Tsections i.e. the Main Runner,1200mm & 600 mm Cross Tees with a web height of 38mm (Thirty eight millimetre) and a load carrying capacity of 15.43 Kgs/M. The T Sections havea Galvanizing of 90 grams per M2 having pull out strength of 100 Kgs. The Tile & Grid system used together should carry a 10 year warrantee. IINSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using GI angles of 25x25x0.5/0.6mm or M8 threaded rods at 1200mm (Twelve hundred millimetre) maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm (Four hundred fifty millimetre) from the adjacent wall. Flush fitting 1200mm (Twelve hundred millimetre) long cross tees to be interlocked between main runners at 600mm centre to form1200x600mm module (Twelve hundred into Six hundred millimetre).Cut cross tees longer than 600mm (Six hundred millimetre) require independent support. 600x600mm (Six hundred into Six hundred millimetre) module to befor medby fitting 600mm (Six hundred millimetre) long flush fitting cross tees centrally between the 1200mm (Twelve hundred millimetre)cross tees. The tile is engaged on the exposed grid system. Perimeter trimtobewall angles of size 3000x19x15mm, secured to walls at 450mm (Four hundred fifty millimetre) maximum centers. complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and Fixing 4mm (Four millimetre) thick eco friendly light weight ACP Sheet false ceiling tiles of approved texture of size 600x600mm (Six hundred into six hundred millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising@ 120 grams per sqm including both side) consisting of main 'T runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet, spaced 1200mm (Twelve hundred millimetre) centre to centre, and cross "T" of size 24x28 mm made out of 0.33mm (Minimum) sheet, 1200mm (Twelve hundred millimetre) long spaced between main' T at 600mm (Six hundred millimetre) centre to centre to form a grid of 1200x600mm (Twelve hundred into six hundred millimetre) and secondary cross 'T' of length 600mm (Twelve hundred millimetre) and size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm (Twelve hundred into six hundred millimetre) panel to from grid of size 600x600mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm (Twenty five millimetre) long dry wall screws @ 230mm (at the rate of two hundred thirty millimetre) interval and laying 4mm (Four millimetre) thick densified edges ACP Sheet ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etcetra., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5mm dia (Twelve point five millimetre) and 50mm (Fifty millimetre) long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8mm, spaced at 1200mm centre to centre along main 'T, bottom exposed with 24mm (Twenty four millimetre) of all T-sections shall be pre-painted with polyster baked paint, for all heights, complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing, fabrication and fixing in position Plaster of Paris false ceiling (height will be decided on the spot as per site conditions) as per design (Plain/Curved/ Arch/ in slope) by fixing jali on frame work then Appling 13.5mm (Thirteen point five millimetre) average thick POP on Jali over frame work of GI sheet section. The main runners of 22 gauge GI sheet and cross runners of 24 gauge GI sheet must be framed to form a mesh of 0.60x0.60m (Zero point sixty into zero point sixty millimetre centre to centre). The POP must be Applied on jali fixed to the GI frame to get a smooth ceiling in line & level & finally finished with paint of approved make and shade complete. Rate inclusive of all material for POP False Ceiling, cutting of light opening, additional supports for light fixtures to hold the concealed light fixtures etcetra and as directed by the site engineer complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing Heat Resistant Terrace Tiles (300x300x20mm) (Three hundred into three hundred into twenty millimetre) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20mm (Twenty millimetre) thick cement sand mortar in the ratio of 1:4 (One cement isto four coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1 (One isto one) including rubbing and polishing of the surface upto 3 (three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 12mm (Twelve millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand), in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.

12mm (Twelve millimeter) thick cement plaster with cement mortar 1:4 (one cement isto four sand), on fair side including finished with a floating coat of neat cement upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on external side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.

Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on moulding cornices or archi traves including neat finish to line upto all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.

6mm (Six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and applying Plaster of Paris putty of average thickness 2mm, (Two millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

18mm (Eighteen millimetre) thick moulded Band straight/in Arech with cement mortar 1:4 (One cement isto four fine sand) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats) with oil bound distemper of approved brand and manufacture (Nerolac/Asian Berger/Dulux and of required shade on un-decorated wall surfaces to give an even shade over and including primer coat of whiting of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate including Octroi, GST, Sales tax, Toll tax or any other taxes imposed by the Government

Finishing walls with textured exterior emulsion of Asian/Dulux/Berger /Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 3.28 litre/ 10 Sqm (Three point twenty eight litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm (Two point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing walls with Acylic smooth exterior emulsion of Asian/Dulux/Berger /Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.67 litre/ 10 Sqm (One point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm (Two point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing walls with 100% (One hundred precent) Premium acuylic emulsion of Asian / Dulux / Berger /Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for frames of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for shutter of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket with float glass panes of 5mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm) etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate with brass cover plate minimum 1.25 mm (One point two five millimetre) thickness etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality upto 5mm (Five millimetre) depth and 5mm (Five millimetre) width complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polyester powder coated minimum thickness 50 (Fifty) micron aluminium tubular handle bar 32mm (Thirty two millimetre) outer diametre, 3.0mm (Three point zero millimetre) thick & 2100mm (Twenty one hundred millimetre) long with SS screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Brass 100mm (One hundred millimetre) mortice latch and lock with 6 (Six) levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour casement/casement fixed glazed windows of comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm (One point sixty plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100x8mm (One hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges 350x19x1.90mm (Three hundred firty into nineteen into one point nine millimetre) made of (big series) frame 67x60mm, sash 67x60 mm,(Sixty seven into sixty millimetre) sash 67x80mm (Sixty seven into eighty millimetre) and mullion 67x80mm (Sixty seven into eighty millimetre) all having wall thickness of 2.3 ± 0.2 mm (Two point three plus minus zero point two millimetre) and single glazing bead/double glazing bead of appropriate dimension including 8mm (Eight millimetre) thick tounghened glass including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone Note:-The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO / IEC 17011 and accredits labs as per ISO/ IEC 17025. 1). Performance Laboratory Test for Air Leakage Test (50pa to- 300pa) & (+50pa to +300pa) as per ASTM E 283-04 testing method for a range of testing limit 1 to 200 mVhr Providing and supplying aluminium extruded tubular 2). Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. 3).Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml 4). Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm 5). Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. 6). Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal placessealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including (b) Providing and supplying aluminium extruded tubular Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant or required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1mm (One millimetre) thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etcetra complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etcetra, enabling temporary structures and services, cranes or cradles etcetra as described above and as specified. The item includes the cost of getting all the structural and functional design Providing and supplying aluminium extruded tubular including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etcetra all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.

Providing and fixing 12mm (Twelve millimetre) thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etcetera for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etcetera to be paid separately). complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of (i) Ist course of applying cement slurry @ 4.4 kg/sqm (at the rate four point four kilogram per square metre) mixed with water proofing compound conforming to IS 2645 in recommended proportions rounding off junction of vertical and horizontal surface. (ii) 2nd (Second) course of 20mm (Twenty millimetre) cement plaster 1:3 (One cement isto three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd (Third) course of applying blown or residual bitumen applied hot at 1.7 kg. (One point seven kilogram) per square metre of area (iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). (One point seven kilogram per square metre) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

  ¥Ð  Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etcetra consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm (Two point seven five kilogram per square metre) of cement admixed with water proofing compound conf

pipe spreader and union and clamps (all in CP brass) including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. 4P¹y
-Providing and fixing wash basin White Vitreous China wash basin size 550x 400mm (Five hundered fifty into four hundered millimetre) of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing /as per details with single 15 mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 32mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. †ˆLProviding and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 510x1040 mm (Five hundered ten into Ten hundered forty millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.Å
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe 40mm (Forty millimetre) diameter complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. ì
Providing and fixing 100mm (One hundred millimetres) diametre sand cast iron grating of Superior quality of Hindware/ Cera/ Jaquar for floor, gully or Nahni trap including neccessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government..l‚IProviding and fixing flat back 1200x1500mm (Twelve hundered into Fifteen hundered millimetres) beveled edge mirror of modi guard / Saint Gobain superior glass complete with 6mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. ýProviding and fixing 600x120x5mm (Six hundered into One hundered twenty into five millimetres) glass shelf of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (Fofrty millimetre) long screws, rawl plugs etcetera including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. VProviding and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) of approved brand and manufacture continental series of Jaquar/Classik series of Hindware/Floral series of Cera/Vintage series of Kerovite and Hindon series of JAL including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. bProviding and fixing trap of self cleansing design with screwed down or hinged dgrating with or without vent arm complete, including cost of cutting and making good the walls and floors 100mm (One hundred millimtre) inlet and 100 mm (One hundred millimtre) outlet Sand cast iron S & S as per IS: 3989 complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. HO

 Providing and fixing bottle trap 31mm (Thirty one millimetre) single piece moulded with height of 270mm, (Two hundred seventy millimetre) effective length of tail pipe 260mm (Two hundred sixty millimetre) from the centre of the waste coupling, 77mm (Seventy seven millimetre) breadth with 25mm (Twenty five millimetre) minimum water seal, weighing not less than 260 gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. {Providing and fixing PTMT liquid soap container 109mm (One hundred nine millimetre) wide, 125mm (One hundred twenty five millimetre) high and 112mm (One hundred twelve millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. `Providing and fixing PTMT towel ring trapezoidal shape 215mm (Two hundred fifteen millimetre) long, 200mm (Two hundred millimetre) wide with minimum distances of 37mm (Thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. Ù
Providing and fixing 100mm (One hundred millimetre) diametre soil, waste and vent pipes Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. 4=Ò
Providing and fixing 100mm (One hundred millimeter) diameters. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 door bend with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage

氠晩獴愠摮漠桴牥椠据摩湥慴獬吠敨爠瑡⁥湩汣摵湩⁧慓敬⁳慴ⱸ䜠呓‬潔汬琠硡漠⁲湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴
牐癯摩湩⁧湡⁤楦楸杮瀠慬湩戠湥⁤景爠煥極敲⁤敤牧敥ㄠ〰浭⠠湏⁥畨摮敲⁤業汬浩瑥牥 楤浡瑥牥⹳䠠扵敬獳挠湥牴晩杵污祬挠獡⁴猨異⥮椠潲灥硯⁹潣瑡摥椠獮摩⁥…畯獴摩⁥獡瀠牥䤠㩓㔱〹‵挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮‮ȾȈ倀潲楶楤杮愠摮映硩湩⁧楳杮敬攠畱污瀠慬湩樠湵瑣潩景爠煥極敲⁤敤牧敥眠瑩⁨捡散獳搠潯Ⱳ椠獮牥楴湯爠扵敢⁲慷桳牥㌠浭⠠桔敲⁥業汬浩瑥敲 桴捩Ⱬ戠汯獴愠摮渠瑵⁳潣灭敬整ㄠ〰ㅸ〰ㅸ〰浭⠠湏⁥畨摮敲⁤湩潴漠敮栠湵牤摥椠瑮湯⁥畨摮敲⁤業汬浩瑥牥 慓摮挠獡⁴物湯匠匦愠⁳数⁲卉ⴠㄠ㈷‹潣灭敬整椠据畬楤杮挠牡楲条⁥景洠瑡牥慩楷桴湩愠汬氠慥獤‬楬瑦⁳湡⁤瑯敨⁲湩楣敤瑮污⁳獡瀠牥猠数楣楦慣楴湯ⱳ愠灰潲敶⁤牤睡湩Ⱨ搠獥杩湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩挭慨杲⹥吠敨爠瑡⁥獩椠据畬楳敶漠⁦捯牴楯‬潲慹楬祴‬慍歬慨慮‬潔汬琠硡‬慳敬琠硡‬升⁔湡⁤湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴爠ᰀ萀᠀ༀ牐癯摩湩⁧湡⁤楦楸杮猠湩汧⁥煥慵汰楡番据楴湯漠⁦敲畱物摥搠来敲⁥〱砰〱砰〱洰伨敮栠湵牤摥椠瑮湯⁥畨摮敲⁤湩潴漠敮栠湵牤摥洠汩楬敭整⥲䠠扵敬獳挠湥牴晩杵污祬挠獡⁴猨異⥮椠潲灥硯⁹潣瑡摥椠獮摩⁥…畯獴摩⁥獡瀠牥䤠㩓㔱〹‵潣灭敬整椠据畬楤杮挠牡楲条⁥景洠瑡牥慩楷桴湩愠汬氠慥獤‬楬瑦⁳湡⁤瑯敨⁲湩楣敤瑮污⁳獡瀠牥猠数楣楦慣楴湯ⱳ愠灰潲敶⁤牤睡湩Ⱨ搠獥杩湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩挭慨杲⹥吠敨爠瑡⁥獩椠据畬楳敶漠⁦捯牴楯‬潲慹楬祴‬慍歬慨慮‬潔汬琠硡‬慳敬琠硡‬升⁔湡⁤湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴ሠ牐癯摩湩⁧湡⁤楦楸杮猠湩汧⁥湵煥慵汰楡番据楴湯漠⁦敲畱物摥搠来敲⁥〱砰〱砰㔷浭⠠湏⁥畨摮敲⁤湩潴漠敮栠湵牤摥椠瑮敳敶瑮⁹楦敶洠汩楬敭整⥲†畈汢獥⁳散瑮楲畦慧汬⁹慣瑳⠠灳湵 物湯攠潰祸挠慯整⁤湩楳敤☠漠瑵楳敤愠⁳数⁲卉ㄺ㤵㔰挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮‮Dž倀潲楶楤杮愠摮映硩湩⁧整浲湩污朠慵摲ㄠ〰浭⠠湏⁥畨摮敲⁤業汬浩瑥敲 畈汢獥⁳散瑮楲畦慧汬⁹慣瑳⠠灳湵 物湯攠潰祸挠慯整⁤湩楳敤☠漠瑵楳敤愠⁳数⁲卉ㄺ㤵㔰挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮‮Ƌ倀潲楶楤杮愠摮映硩湩⁧潣汬牡ㄠ〰浭⠠湏⁥畨摮敲⁤業汬浩瑥敲 匠湡⁤慣瑳椠潲♓⁓獡瀠牥䤠ⵓ㜱㤲挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮‮ɏ倀楡瑮湩⁧慳摮挠獡⁴物湯 散瑮楲畦慧汬⁹慣瑳⠠灳湵 物湯猠楯ⱬ眠獡整瘠湥⁴楰数⁳湡⁤楦瑴湩獧眠瑩⁨睴潣瑡⁳景猠湹桴瑥捩攠慮敭慰湩⁴景愠祮挠汯畯⁲畳档愠⁳档捯汯瑡来敲ⱹ漠⁲畢晦攠捴瑥牥⁡癯牥愠挠慯⁴景瀠楲敭⁲漨⁦灡牰癯摥焠慵楬祴 潦⁲敮⁷潷歲†〱洰伨敮栠湵牤摥洠汩楬敭牴⥥搠慩敭整⁲楰数挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮‮˩؈倀潲楶楤杮愠摮映硩湩⁧䌠汨牯湩瑡摥倠汯癹湩汹䌠汨牯摩⁥䌨噐⥃瀠灩獥‬慨楶杮琠敨浲污猠慴楢楬祴映牯栠瑯☠挠汯⁤慷整⁲畳灰祬‬湩汣摵湩⁧污偃䍖瀠慬湩☠戠慲獳琠牨慥敤⁤楦瑴湩獧‬湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮洰⠠湏⁥潰湩⁴敺潲稠牥敭牴⥥猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳…楦瑴湩獧眠瑩⁨湯⁥瑳灥䌠噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴映牯䤠瑮牥慮潷歲䔭灸獯摥漠慷汬㈠洰吨敷瑮⁹業汬浩瑥敲 潮業慮畯整⁲楤浡瑥敲倠灩獥挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮‮ŤŧŨƭƵƻˮ؈倀潲楶楤杮愠摮映硩湩⁧䌠汨牯湩瑡摥倠汯癹湩汹䌠汨牯摩⁥䌨噐⥃瀠灩獥‬慨楶杮琠敨浲污猠慴楢楬祴映牯栠瑯☠挠汯⁤慷整⁲畳灰祬‬湩汣摵湩⁧污偃䍖瀠慬湩☠戠慲獳琠牨慥敤⁤楦瑴湩獧‬湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮洰⠠湏⁥潰湩⁴敺潲稠牥敭牴⥥猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳…楦瑴湩獧眠瑩⁨湯⁥瑳灥䌠噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴映牯䤠瑮牥慮潷歲䔭灸獯摥漠慷汬㈠洵吨敷瑮⁹楦敶洠汩楬敭牴⥥渠浯湩污漠瑵牥搠慩敭牴⁥楐数⁳潣灭敬整椠据畬楤杮挠牡楲条⁥景洠瑡牥慩楷桴湩愠汬氠慥獤‬楬瑦⁳湡⁤瑯敨⁲湩楣敤瑮污⁳獡瀠牥猠数楣楦慣楴湯ⱳ愠灰潲敶⁤牤睡湩Ⱨ搠獥杩湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩挭慨杲⹥吠敨爠瑡⁥獩椠据畬楳敶漠⁦捯牴楯‬潲慹楬祴‬慍歬慨慮‬潔汬琠硡‬慳敬琠硡‬升⁔湡⁤湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴挠ᰁ最᠁栀ࠁ눀ᰁ묀ࠁ쀀᠁ࠂ牐癯摩湩⁧湡⁤楦楸杮†桃潬楲慮整⁤潐祬楶祮桃潬楲敤⠠偃䍖 楰数ⱳ栠癡湩⁧桴牥慭瑳扡汩瑩⁹潦⁲潨⁴…潣摬眠瑡牥猠灵汰ⱹ椠据畬楤杮愠汬䌠噐⁃汰楡…牢獡⁳桴敲摡摥映瑩楴杮ⱳ椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰伨敮瀠楯瑮稠牥敺潲洠瑥敲 灳捡湩⹧吠楨⁳湩汣摵獥樠楯瑮湩⁧景瀠灩獥☠映瑩楴杮⁳楷桴漠敮猠整⁰偃䍖猠汯敶瑮挠浥湥⁴湡⁤整瑳湩⁧景樠楯瑮⁳潦⁲湉整湲污眠牯⵫硅潰敳⁤湯眠污㈳浭⠠桔物祴琠潷洠汩楬敭牴⥥渠浯湩污漠瑵牥搠慩敭牴⁥楐数⁳潣灭敬整椠据畬楤杮挠牡楲条⁥景洠瑡牥慩楷桴湩愠汬氠慥獤‬楬瑦⁳湡⁤瑯敨⁲湩楣敤瑮污⁳獡瀠牥猠数楣楦慣楴湯ⱳ愠灰潲敶⁤牤睡湩Ⱨ搠獥杩湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩挭慨杲⹥吠敨爠瑡⁥獩椠据畬楳敶漠⁦捯牴楯‬潲慹楬祴‬慍歬慨慮‬潔汬琠硡‬慳敬琠硡‬升⁔湡⁤湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴挠ᰁ最᠁栀ࠁ넀ᰁ먀ࠁ뼀᠁ࠂ牐癯摩湩⁧湡⁤楦楸杮†桃潬楲慮整⁤潐祬楶祮桃潬楲敤⠠偃䍖 楰数ⱳ栠癡湩⁧桴牥慭瑳扡汩瑩⁹潦⁲潨⁴…潣摬眠瑡牥猠灵汰ⱹ椠据畬楤杮愠汬䌠噐⁃汰楡…牢獡⁳桴敲摡摥映瑩楴杮ⱳ椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰伨敮瀠楯瑮稠牥敺潲洠瑥敲 灳捡湩⹧吠楨⁳湩汣摵獥樠楯瑮湩⁧景瀠灩獥☠映瑩楴杮⁳楷桴漠敮猠整⁰偃䍖猠汯敶瑮挠浥湥⁴湡⁤整瑳湩⁧景樠楯瑮⁳潦⁲湉整湲污眠牯⵫硅潰敳⁤湯眠污〴浭⠠潆瑲⁹業汬浩瑥敲 潮業慮畯整⁲楤浡瑥敲倠灩獥挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮‮ţŧŨƬƴƺ˨Ԉ倀潲楶楤杮愠摮映硩湩⁧䌠汨牯湩瑡摥倠汯癹湩汹䌠汨牯摩⁥䌨噐⥃瀠灩獥‬慨楶杮琠敨浲污猠慴楢楬祴映牯栠瑯☠挠汯⁤慷整⁲畳灰祬‬湩汣摵湩⁧污偃䍖瀠慬湩☠戠慲獳琠牨慥敤⁤楦瑴湩獧‬湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮洰⠠湏⁥潰湩⁴敺潲稠牥敭牴⥥猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳…楦瑴湩獧眠瑩⁨湯⁥瑳灥䌠噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴映牯䤠瑮牥慮潷歲䔭灸獯摥漠慷汬㔠洰䘨晩祴洠汩楬敭牴⥥渠浯湩污漠瑵牥搠慩敭牴⁥楐数⁳潣灭敬整椠据畬楤杮挠牡楲条⁥景洠瑡牥慩楷桴湩愠汬氠慥獤‬楬瑦⁳湡⁤瑯敨⁲湩楣敤瑮污⁳獡瀠牥猠数楣楦慣楴湯ⱳ愠灰潲敶⁤牤睡湩Ⱨ搠獥杩湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩挭慨杲⹥吠敨爠瑡⁥獩椠据畬楳敶漠⁦捯牴楯‬潲慹楬祴‬慍歬慨慮‬潔汬琠硡‬慳敬琠硡‬升⁔湡⁤湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴搠ᰁ栀ࠁ가ᰁ됀ࠁ먀᠁吀ࠃ牐癯摩湩⁧湡⁤楦楸杮䌠汨牯湩瑡摥倠汯癹湩汹䌠汨牯摩⁥䌨噐⥃瀠灩獥‬慨楶杮琠敨浲污猠慴楢楬祴映牯栠瑯☠挠汯⁤慷整⁲畳灰祬‬湩汣摵湩⁧污偃䍖瀠慬湩☠戠慲獳琠牨慥敤⁤楦瑴湩獧‬湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮洰⠠湏⁥潰湩⁴敺潲稠牥敭牴⥥猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳…楦瑴湩獧眠瑩⁨湯⁥瑳灥䌠噐⁃潳癬湥⁴散敭瑮愠摮琠敨挠獯⁴景挠瑵楴杮挠慨敳⁳湡⁤慭楫杮朠潯⁤桴⁥慳敭椠据畬楤杮琠獥楴杮漠⁦潪湩獴映牯䌠湯散污摥眠牯Ⱬ椠据畬楤杮挠瑵楴杮挠慨敳⁳湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳瑥散整慲㈠洰吨敷瑮⁹業汬浩瑥敲 潮業慮畯整⁲楤浡瑥敲倠灩獥挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠

per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. µ
¤
¥
 & Cubic metresLitre Running metre Square metre Square metresPer bag of 50Kg cement Square metresRunning metresKilogram Cubic metrecm depth per 100mNumbers Kilogramme Square metre Y Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints for Concealed work, including cutting chases and making good the walls etcetera 25mm (Twenty five millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. ¬µÛö
¥
&+XProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints for Concealed work, including cutting chases and making good the walls etcetera 32mm (Thirty two millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. Ûö¡
¤
¥
$*Ñ
Providing and fixing 20mm (Twenty millimetre) nominal bore C.P. brass brass stop cock of standard design of Hindware/Cera/Jaquar including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. lÃ
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 25mm (Twenty five millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. y‚Â
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 32mm (Thirty two millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. x€¾
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 40mm (Forty millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. t|½
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 50mm (Fifty millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. s{iProviding and placing on terrace (at all floor levels polyethylene water storage tank, tripple layer of Finolex/Relpipe (Reliance)/Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.¥
Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass bib cock of approved quality conforming to IS:8931 : complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. ›Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. ,Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass angle valve of Continental series of Jaquar /Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. LProviding and fixing 110mm (One hundered ten millimetre) diametre on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed conforming to IS : 13592 Type A ISI marked of Finolex/ Relpipe (Reliance) /Vectus working pressure not less than 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure), including jointing with seal ring conforming to IS : 5382 including jointing with seal ring leaving 10mm (Ten millimetre) gap for thermal expansion including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.OProviding and fixing 110mm (One hundered ten millimetre) Coupler on wall face unplasticised PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.RProviding and fixing 110mm (One hundered ten millimetre) Bend 87.5° on wall face unplasticised PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.ï
Providing and fixing G.I.pipes complete with G.I. fittings including trenching and refilling etcetra for External work 50mm (Fifty millimetre) diametre nominal bore complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.\i—ï
Providing and fixing G.I.pipes complete with G.I. fittings including trenching and refilling etcetra for External work 40mm (Forty millimetre) diametre nominal bore complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.\i—aProviding and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm (Three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (Four point fifty kiligram) and frame to be not less than 2.70 kg (Two point seventy kilogram) as per standard design 150x100mm (One hundred fifty into one hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. 
)
P
l
UProviding and laying 250mm (Two hundred fifty millimetre) diametre non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (One cement isto two fine sand) including testing of joints etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. :BQProviding and laying 300mm (Three hundred millimetre) diametre non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (One cement isto two fine sand) including testing of joints etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. 6?þ
 Constructing brick masonry manhole with FPS Non modular bricks (conforming to IS:4885) in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size), inside plastering 12mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetres) and 45 cm (forty five centimetres) deep including C.I. cover with frame (medium duty) 455x610mm (Four hundred fifty five into six hundred ten millimetres) internal diameter, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.#VüConstructing brick masonry manhole with FPS Non modular bricks (conforming to IS:4885) in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size), inside plastering 12mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundred twenty into Ninety centimetres) and 90cm (Ninety centimetres) deep including C.I. cover with frame (medium duty) 500mm (Five hundred millimetres) internal diameter, total weight of cover and frame to be not less than 116 kg (One hundred sixteen kilogramme) (weight of cover 58 kg (Fifty eight kilogramme) and weight of frame 58 kg (Fifty eight kilogramme) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.#VCostructing extra depth for brick masonary manhole having size 90x80cm (Ninety into eighty centimetres) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.³ë%Costructing extra depth for brick masonary manhole having size 120x90cm (One hundred twenty into Ninety centimetres) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.Àø€ Providing orange colour safety foot rest of minimum 6mm (Six millimetre) thick plastic encapsulated as per IS : 10910, on 12mm (Twelve millimetre) dia steel bar conforming to IS: 1786, having minimum cross section as 23mmx25mm (Twenty three millimetre into twenty five millimetre) and over all minimum length 263mm (Two hundred sixty three millimetre) and width as 165mm (One hundred sisty five millimetre) with minimum 112mm (One hundred twelve millimetre) space between protruded legs having 2mm (Two millimetre) tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm (One hundred thirty eight millimetre) as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm (Thirty into twenty into fifteen centimetre) cement concrete block 1:3:6 (One cement is theee coarse sand isto six graded stone aggregate 20mm (Twenty milimetre) nominal size) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.8H’ãĘĻşƪljDZȂΜωЫоʾ䌀湯瑳畲瑣湩⁧牢捩慭潳牮⁹潲摡朠汵祬挠慨扭牥㔠砰㔴㙸挰䘨晩祴椠瑮潦瑲⁹楦敶椠瑮楳瑸⁹散瑮浩瑥敲 楷桴戠楲正⁳湩挠浥湥⁴潭瑲牡ㄠ㐺⠠湯⁥散敭瑮椠瑳潦牵挠慯獲⁥慳摮 湩汣摵湩⁧〵砰㔴洰䘨癩⁥畨摮敲⁤湩潴映畯⁲畨摮敲⁤楦瑦⁹業汬浩瑥敲 牰ⵥ慣瑳删䌮䌮‮潨楲潺瑮污朠慲楴杮眠瑩⁨牦浡⁥潣灭敬整愠⁳数⁲瑳湡慤摲搠獥杩楷桴挠浯潭畢湲⁴汣祡䘠倮匮‮渨湯洠摯汵牡 牢捩獫漠⁦汣獡⁳敤楳湧瑡潩⸷‵潣灭敬整椠据畬楤杮攠瑮物⁥慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮ᔮ牐癯摩湩⁧湡⁤潃獮牴捵楴杮戠楲正洠獡湯祲挠慨扭牥映牯甠摮牥牧畯摮䌠䤮‮湩灳捥楴湯挠慨扭牥愠摮戠湥獤眠瑩⁨牢捩獫椠散敭瑮洠牯慴⁲㨱‴漨敮挠浥湥⁴椠瑳映畯⁲潣牡敳猠湡⥤䌠䤮‮潣敶⁲楷桴映慲敭⠠楬桧⁴畤祴 㔴砵ㄶ‰浭⠠潆牵栠湵敤敲⁤楦瑦⁹楦敶椠瑮楳⁸畨摮牥摥琠湥洠汩楬敭牴獥 湩整湲污搠浩湥楳湯ⱳ琠瑯污眠楥桧⁴景挠癯牥眠瑩⁨牦浡⁥潴戠⁥潮⁴敬獳琠慨㠳欠⁧吨楨瑲⁹楥桧⁴楫潬牧浡敭 眨楥桧⁴景挠癯牥㈠″杫⠠睔湥祴琠牨敥欠汩杯慲浭⥥愠摮眠楥桧⁴景映慲敭ㄠ‵杫⠠楆瑦敥楫潬牧浡敭⤩‬⹒⹃⹃琠灯猠慬⁢楷桴ㄠㄺ㔮㌺洠硩⠠湯⁥散敭瑮椠瑳湯⁥潰湩⁴楦敶䘠湩⁥慳摮†獩潴琠牨敥朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠琨敷瑮⁹業汬浩瑥敲⥳渠浯湩污猠穩⥥‬潦湵慤楴湯挠湯牣瑥⁥㨱㨵〱⠠湯⁥散敭瑮†獩潴†楦敶映湩⁥慳摮†獩潴琠湥朠慲敤⁤瑳湯⁥条牧来瑡⁥〴洠䘨牯祴洠汩楬敭牴獥 潮業慮楳敺Ⱙ椠獮摩⁥汰獡整楲杮ㄠ′浭⠠睔汥敶洠汩楬敭牴獥 桴捩楷桴挠浥湥⁴潭瑲牡ㄠ㌺⠠湯⁥散敭瑮†獩潴琠牨敥挠慯獲⁥慳摮Ⱙ映湩獩敨⁤浳潯桴眠瑩⁨⁡汦慯楴杮挠慯⁴景渠慥⁴散敭瑮漠慷汬⁳湡⁤敢⁤潣据敲整攠捴瑥牥⁡潣灭敬整愠⁳数⁲瑳湡慤摲搠獥杩湉楳敤搠浩湥楳湯⁳㔴砵ㄶ‰浭⠠潆牵栠湵敤敲⁤楦瑦⁹楦敶椠瑮楳⁸畨摮牥摥琠湥洠汩楬敭牴獥 湡⁤㔴挠䘨牯祴映癩⁥散瑮浩瑥敲⥳搠敥⁰潦⁲楳杮敬瀠灩⁥楬敮†楗桴挠浯潭畢湲⁴汣祡䘠倮匮‮渨湯洠摯汵牡 牢捩獫漠⁦汣獡⁳敤楳湧瑡潩⸷‵匨癥湥瀠楯瑮映癩⁥散瑮浩瑥敲⥳挠浯汰瑥⁥湩汣摵湩⁧慣牲慩敧漠⁦慭整楲污眠瑩楨污敬摡ⱳ氠晩獴愠摮漠桴牥椠据摩湥慴獬愠⁳数⁲灳捥晩捩瑡潩獮‬灡牰癯摥搠慲楷杮‬敤楳湧愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮档牡敧‮桔⁥慲整椠⁳湩汣獵癩⁥景漠瑣潲Ⱪ爠祯污瑩ⱹ䴠污桫湡ⱡ吠汯慴ⱸ猠污⁥慴ⱸ䜠呓愠摮愠祮漠桴牥琠硡獥椠灭獯摥戠⁹桴⁥潇敶湲敭瑮ﰮ牐癯摩湩⁧湡⁤潃獮牴捵楴杮戠楲正洠獡湯祲挠慨扭牥映牯甠摮牥牧畯摮䌠䤮‮湩灳捥楴湯挠慨扭牥愠摮戠湥獤眠瑩⁨牢捩獫椠散敭瑮洠牯慴⁲㨱‴漨敮挠浥湥⁴椠瑳映畯⁲潣牡敳猠湡⥤䌠䤮‮潣敶⁲楷桴映慲敭⠠楬桧⁴畤祴 〵砰〷‰浭⠠楆敶栠湵敤敲⁤湩潴猠癥湥栠湵敤敲⁤業汬浩瑥敲⥳椠瑮牥慮楤敭獮潩獮‬潴慴敷杩瑨漠⁦潣敶⁲楷桴映慲敭琠敢渠瑯氠獥⁳桴湡㌠‸杫⠠桔物祴攠杩瑨欠汩杯慲浭⥥⠠敷杩瑨漠⁦潣敶⁲㌲欠⁧吨敷瑮⁹桴敲⁥楫潬牧浡敭 湡⁤敷杩瑨漠⁦牦浡⁥㔱欠⁧䘨晩整湥欠汩杯慲浭⥥Ⱙ删䌮䌮‮潴⁰汳扡眠瑩⁨㨱⸱㨵″業⁸漨敮挠浥湥⁴獩潴漠敮瀠楯瑮映癩⁥楆敮猠湡⁤椠瑳桴敲⁥牧摡摥猠潴敮愠杧敲慧整㈠‰浭⠠睴湥祴洠汩楬敭牴獥 潮業慮楳敺Ⱙ映畯摮瑡潩潣据敲整ㄠ㔺ㄺ‰漨敮挠浥湥⁴椠瑳映癩⁥楦敮猠湡⁤椠瑳整牧摡摥猠潴敮愠杧敲慧整㐠‰浭⠠潆瑲⁹業汬浩瑥敲⥳渠浯湩污猠穩⥥‬湩楳敤瀠慬瑳牥湩⁧㈱洠吨敷癬⁥業汬浩瑥敲⥳琠楨正眠瑩⁨散敭瑮洠牯慴⁲㨱″漨敮挠浥湥⁴椠瑳桴敲⁥潣牡敳猠湡⥤‬楦楮桳摥猠潭瑯⁨楷桴愠映潬瑡湩⁧潣瑡漠⁦敮瑡挠浥湥⁴湯眠污獬愠摮戠摥挠湯牣瑥⁥瑥散整慲挠浯汰瑥⁥獡瀠牥猠慴摮牡⁤敤楳湧䤠獮摩⁥楤敭獮潩獮㔠〰㝸〰洠䘨癩⁥畨摮牥摥椠瑮敳敶畨摮牥摥洠汩楬敭牴獥 愠摮㐠‵浣⠠潆瑲⁹楦敶挠湥楴敭牴獥 敤灥映牯猠湩汧⁥楰数氠湩⁥圠瑩⁨潣浭湯戠牵瑮挠慬⁹⹆⹐⹓⠠潮潭畤慬⥲戠楲正⁳景挠慬獳搠獥杩慮楴湯㜠㔮⠠敓敶潰湩⁴楦敶挠湥楴敭牴獥 潣灭敬整椠据畬楤杮挠牡楲条⁥景洠瑡牥慩楷桴湩愠汬氠慥獤‬楬瑦⁳湡⁤瑯敨⁲湩楣敤瑮污⁳獡瀠牥猠数楣楦慣楴湯ⱳ愠灰潲敶⁤牤睡湩Ⱨ搠獥杩湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩挭慨杲⹥吠敨爠瑡⁥獩椠据畬楳敶漠⁦捯牴楯‬潲慹楬祴‬慍歬慨慮‬潔汬琠硡‬慳敬琠硡‬升⁔湡⁤湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴؅倀潲楶楤杮愠摮䌠湯瑳畲瑣湩⁧牢捩慭潳牮⁹档浡敢⁲潦⁲湵敤杲潲湵⁤⹃⹉椠獮数瑣潩档浡敢⁲湡⁤敢摮⁳楷桴戠楲正⁳湩挠浥湥⁴潭瑲牡ㄠ㐺⠠湯⁥散敭瑮†獩潴†潦牵挠慯獲⁥慳摮 ⹃⹉挠癯牥眠瑩⁨牦浡⁥氨杩瑨搠瑵⥹㘠〰㡸〵洠匨硩栠湵敤敲⁤湩潴攠杩瑨栠湵敤敲⁤楦瑦⁹業汬浩瑥敲⥳椠瑮牥慮楤敭獮潩獮‬潴慴敷杩瑨漠⁦潣敶⁲楷桴映慲敭琠敢渠瑯氠獥⁳桴湡㌠‸杫⠠桔物祴攠杩瑨欠汩杯慲浭⥥⠠敷杩瑨漠⁦潣敶⁲㌲欠⁧吨敷瑮⁹桴敲⁥楫潬牧浡敭 湡⁤敷杩瑨漠⁦牦浡⁥㔱欠⁧䘨晩整湥欠汩杯慲浭⥥Ⱙ删䌮䌮‮潴⁰汳扡眠瑩⁨㨱⸱㨵″業⁸漨敮挠浥湥⁴獩潴漠敮瀠楯瑮映癩⁥楆敮猠湡⁤椠瑳桴敲⁥牧摡摥猠潴敮愠杧敲慧整㈠‰浭⠠睴湥祴洠汩楬敭牴獥 潮業慮楳敺Ⱙ映畯摮瑡潩潣据敲整ㄠ㔺ㄺ‰漨敮挠浥湥⁴椠瑳映癩⁥楦敮猠湡⁤椠瑳整牧摡摥猠潴敮愠杧敲慧整㐠‰浭⠠潆瑲⁹業汬浩瑥敲⥳渠浯湩污猠穩⥥‬湩楳敤瀠慬瑳牥湩⁧㈱洠吨敷癬⁥業汬浩瑥敲⥳琠楨正眠瑩⁨散敭瑮洠牯慴⁲㨱″漨敮挠浥湥⁴椠瑳桴敲⁥潣牡敳猠湡⥤‬楦楮桳摥猠潭瑯⁨楷桴愠映潬瑡湩⁧潣瑡漠⁦敮瑡挠浥湥⁴湯眠污獬愠摮戠摥挠湯牣瑥⁥瑥散整慲挠浯汰瑥⁥獡瀠牥猠慴摮牡⁤敤楳湧䤠獮摩⁥楤敭獮潩獮㘠〰㡸〵浭⠠楓⁸畨摮牥摥椠瑮楥桧⁴畨摮牥摥映晩祴洠汩楬敭牴獥 愠摮㐠‵浣⠠潆瑲⁹楦敶挠湥楴敭牴獥 敤灥映牯猠湩汧⁥楰数氠湩⁥圠瑩⁨潣浭湯戠牵瑮挠慬⁹⹆⹐⹓⠠潮潭畤慬⥲戠楲正⁳景挠慬獳搠獥杩慮楴湯㜠㔮⠠敓敶潰湩⁴楦敶挠湥楴敭牴獥 潣灭敬整椠据畬楤杮挠牡楲条⁥景洠瑡牥慩楷桴湩愠汬氠慥獤‬楬瑦⁳湡⁤瑯敨⁲湩楣敤瑮污⁳獡瀠牥猠数楣楦慣楴湯ⱳ愠灰潲敶⁤牤睡湩Ⱨ搠獥杩湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩挭慨杲⹥吠敨爠瑡⁥獩椠据畬楳敶漠⁦捯牴楯‬潲慹楬祴‬慍歬慨慮‬潔汬琠硡‬慳敬琠硡‬升⁔湡⁤湡⁹瑯敨⁲慴數⁳浩潰敳⁤祢琠敨䜠癯牥浮湥⹴ɫЈ䌀湯瑳畲瑣湩⁧硅牴⁡敤瑰⁨潦⁲牢捩慭潳牮⁹桃浡敢⁲敢潹摮㐠挵䘨牯祴映癩⁥散瑮浩瑥敲 景戠楲正洠獡湯祲挠慨扭牥猠穩⁥㔴砵ㄶ洰䘨畯⁲畨摮牥摥映晩祴映癩⁥湩潴猠硩栠湵敤敲⁤整業汬浩瑥敲⥳圠c

th common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement motar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.2
>
^Constructing Extra depth for brick masonry Chamber beyond 45cm (Forty five centimetre) of brick masonry chamber size 500x700mm (Five hundered into seven hundered millimetres) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement motar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.2û1
dConstructing Extra depth for brick masonry Chamber beyond 45cm (Forty five centimetre) of brick masonry chamber size 600x850mm (Six hundered into eight hundered fifty millimetres) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement motar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.3

7
´Boring/drilling bore well of Rocky strata including Boulders 300mm (Three hundred millimetre) required diametre for casing/ strainer pipe, by suitable method prescribed in IS:2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log including hire & running charges of all equipments, tools, plants & machineries required for the job complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.goYSupplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etcetera all complete, 150mm (One hundred firty millimetre) nominal size diametre complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any oth

Supplying and `Fixing of FRP Made garting above drain including labour material T & P complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Please Enable Macros to View BoQ information