Loading…
Loading…
Tender Value
₹10 L
EMD Value
₹7,500
Closing Date
8 Jun 2026, 6:00 pm3d left
Ex.Eng (O&M) Valsad Rural Division
Maintenance and Erection work of HT/LT line and TC network for Bilimora Rural (Antaliya) Sub-Division for Various schemes in various Feeder under Valsad-Rural Division.
309946
DGVCL/VALSAD-R DO/E-TENDER/2026-27/27
Open
Miscellaneous Works
Valsad
8 documents required · 8 mandatory
₹885
DGVCL, Payable Valsad
₹7,500
30 May 2026
30 May 2026
30 May 2026
8 Jun 2026
30 May 2026
Item Code Item Unit FY 2024-25
HT TAPPING FROM THE EXISTING POLE INCLUDING
FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING
DEVICES, DANGER BOARD, INSULATORS ETC.
1 9926000001 COMPLETE AND PAINTING OF FABRICATED No.
MATERIALS AND NUMBERING COMPLETE WITH COST
OF PAINTS AS PER STANDARD SPECIFICATION BUT
EXCLUDING ERECTION OF GUY SET AND EARTHING.
ERECTION OF PSC POLES OF 8 *200 KG INCLUDING
EXCAVATION OF PIT AND REFILLING OF EARTH,
FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-
CLIMBING DEVICES, INSULATORS ETC. COMPLETE
AND PAINTING OF FABRICATED MATERIALS USED ON
THE POLES AND NUMBERING WITH COST OF PAINT
AS PER STANDARD SPECIFICATION BUT EXCLUDING
ERECTION OF GUY SET AND EARTHING.
ERECTION OF STEEL POLES OF 9 TO 11 METERS
INCLUDING EXCAVATION OF PIT AND REFILLING OF
EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS
ANTI-CLIMBING DEVICES, DANGER BOARD,
3 9926000003 INSULATORS ETC. COMPLETE AND PAINTING OF No.
STEEL POLE, FABRICATED MATERIALS USED ON THE
POLEAND NUMBERING WITH COST OF PAINT AS PER
STANDARD SPECIFICATION BUT EXCLUDING
ERECTION OF GUY SET AND EARTHING.
ERECTION OF STEEL POLE OF 13 METERS FOR
4 9926000004 RAILWAY CROSSING ON BG/MG/NG LINE FOR No.
0.400/11/22KV OVERHEAD LINES I.E INCLUDING
EXCAVATION OF PIT & REFILLING OF EARTH, FIXING
CROSS ARMS, TOP FITTING CLAMPS, ANTI-CLIMBING
DEVICES DANGER BOARD, INSULATORS ETC.
COMPLETE AND PAINTING OF STEEL POLES,
FABRICATED MATERIALS USED ON THE POLES AND
NUMBERING WITH COSTOF PAINT AS PER STANDARD
SPECIFICATION BUT EXCLUDING ERECTION OF GUY
SETS AND EARTHING.
ERECTION OF DOUBLE POLE STRUCTURE OF
METERS 200 KG PSC POLES INCLUDING EXCAVATION
OF PITS & REFILLING OF EARTHING, FIXING OF
CHANNELS, SUPPORTING ANGLES, CLAMPS, ANTI-
CLIMBING DEVICES DANGER BOARDS, INSULATORS
ETC.COMPLETE AND PAINTING OF FABRICATED
MATERIALS USED ON THE POLES AND NUMBERING
WITH COST OF PAINT AS PER STANDARD
SPECIFICATION BUT EXCLUDING ERECTION OF GUY
SETS AND EARTHING. (WITHOUT AB SWITCH)
ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO
METERS.STEEL POLE INCLUDING EXCAVATION OF
PITS & REFILLING OFEARTH, FIXING OF CHANNELS,
SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING
DEVICES DANGER BOARDS, INSULATORS
ETC.COMPLETE & PAINTING OF POLES, FABRICATED
MATERIALSUSED ON THE POLES AND NUMBERING
WITH COST OF PAINTSAS PER STANDARD
SPECIFICATION BUT EXCLUDING ERECTION OF GUY
SET AND EARTHING. (WITHOUT AB SWITCH)
ERECTION OF DOUBLE POLE STRUCTURE WITH
MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS
KG PSC POLES INCLUDING EXCAVATION OF PITS AND
REFILLING OF EARTH, FIXING OF CHANNELS
SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING
7 9926000007 DEVICES, DANGER BOARDS, INSULATORS, DOFUSES No.
ETC. COMPLETE AND PAINTING OF FABRICATED
MATERIALS USED ON THE POLES AND NUMBERING
WITH COSTOF PAINT AS PER STANDARD
SPECIFICATION BUT EXCLUDINGOF ERECTION OF
GUY SET AND EARTHING. (WITH AB SWITCH)
ERECTION OF DOUBLE POLE STRUCTURE WITH
MOUNTING OF AB SWITCH, HG FUSES, 9 TO
METERS STEEL POLES INCLUDING EXCAVATION OF
PITS AND REFILLING OF EARTH, FIXING OFCHANNEL,
SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING
8 9926000008 DEVICES, DANGER BOARDS, INSULATORS, ETC. No.
COMPLETE AND PAINTING OF POLES FABRICATED
MATERIALS USED ON THE POLES AND NUMBERING
WITH COST OF PAINT AS PER STANDARD
SPECIFICATION BUT EXCLUDING ERECTION OF GUY
SET AND EARTHING. (WITH AB SWITCH)
ERECTION OF DOUBLE POLE STRUCTURES WITH
MOUNTING OFAB SWITCH, HG FUSES,
TRANSFORMERS, LIGHTENING ARRESTORS,
DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE
METERS POLES INCLUDING EXCAVATION OF PITS AND
REFILLING OF EARTH, CARTING OF TRANSFORMERS
FROMSTORES TO SITE, FIXING OF CHANNELS,
SUPPORTING ANGLES, BRACINGS CROSS ARMS
CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,
CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND
PAINTING OF FABRICATED MATERIALS USEDON THE
POLES AND NUMBERING WITH COST OF PAINT AS
PER STANDARD SPECIFICATION BUT EXCLUDING
ERECTION OF GUY SETS AND EARTHING.
ERECTION OF DOUBLE POLE STRUCTURE WITH
MOUNTING OF AB SWITCH, HG FUSES
TRANSFORMERS, LIGHTENING ARRESTORS,
DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES
INCLUDING EXCAVATION OF PITS & REFILLING OF
EARTH CARTING OF TRANSFORMERS FROM STORE TO
SITE, FIXINGOF CHANNELS SUPPORTING ANGLES,
BRACING, CROSS ARMS, CLAMPS, ANTICLIMBING
DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE
WIRING ETC. COMPLETE AND PAINTING OF POLES
FABRICATED MATERIALS USED ON THE POLES AND
NUMBERING AS PER STANDARD SPECIFICATION BUT
EXCLUDING ERECTIONS OF GUY SETS AND
ERECTION OF GUY SET INCLUDING EXCAVATION OF
PITS & REFILLING OF EARTH AS PER STANDARD
SPECIFICATION WITH STAY CLAMPS, STAY WIRE,
ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY
INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT
EXCLUDING CONCRETING.
CONCRETING OF POLES, GUYS, ETC. INCLUDING
COST OF CEMENT SAND METAL (1:2:4) AND WATER
ETC. AS PER STANDARD SPECIFICATION. (cement
Should be 53 grade) used for Concreting.
ERECTION OF COIL TYPE EARTHING INCLUDING COST
OF COAL, SALT ETC. BUT WITHOUT COST OF GI WIRE
AS PER STANDARD SPECIFICATION (20kg solt+20kg
ERECTION OF GI PIPE/CI PLATE TYPE EARTHING
INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT
COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD
SPECIFICATION. (20kg solt+20kg coal)
ERECTION OF STREET LIGHT FIXTURE COMPLETE
WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK
15 9926000015 WOOD BUSH, REFLECTORS FUSE, WIRING ETC. AS No.
PER STANDARD SPECIFICATION BUT EXCLUDING
COST OF MATERIALS.
STRINGING OF (30mm2) ACSR/34MM@,55MM2 AAA ONE
16 9926000016 CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT COND
DOG CONDUCTOR) FOR 11/22KV & LT LINES PER KM
INCLUDING FIXING OF INSULATORS, BINDING
STRINGING OF GI WIRE 8 SWG INCLUDING BINDING
PROVIDING SINGLE PHASE SERVICE CONNECTION
WITH PVC 2.5/4MM2 TWIN CORE CABLE FROM
TERMINAL POLE TO METERING POINT INCLUDING
FIXING OF METER WITH METER EARTHING COMPLETE
WORK AS PER STANDARD SPECIFICATION BUT
EXCLUDING COST OF MATERIALS.
PROVIDING THREE PHASE 4 WIRE SERVICE
CONNECTION WITH PVC 4MM2/10MM2 FOUR CORE
CABLE FROM TERMINAL POLE TO METERING POINT
19 9926000019 INCLUDING FIXING OF METER WITH METER No.
EARTHING COMPLETE WORK AS PER STANDARD
SPECIFICATION BUT EXCLUDING COST OF
ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD
ROCK AREA FOR ERECTION OF POLE/ GUY ETC. AS
PER STANDARD SPECIFICATION OVER & ABOVE
20 9926000020 NORMAL COST COVERED AGAINST EXCAVATION OF No.
PIT UNDER NORMAL SOIL FOR ERECTION OF POLE,
GUY, DOUBLE POLE STRUCTURE EARTHING WITH THE
APPROVAL OF SUPDT.ENGINEER.
PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL
PROVIDING GUARDING OF LT LINES ON ROAD/RAIL
23 9926000023 LT LINE TAPPING- SINGLE PHASE No.
24 9926000024 LT LINE TAPPING- THREE PHASE No.
Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD
25 9926000025 CROSSING, HT LINE CROSSING AND TELEPHONE LINE No.
CROSSING ETC. (PER SPAN)
ERECTION OF SINGLE POLE STRUCTURES WITH, HG
FUSES, TRANSFORMERS, LIGHTENING ARRESTOR,
DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC
POLE INCLUDING EXCAVATION OF PITS AND
REFILLING OF EARTH, CARTING OF TRANSFORMERS
FROM STORES TO SITE, FIXING OF CHANNELS,
26 9926000026 SUPPORTING ANGLES, BRACINGS CROSS ARMS No.
CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,
CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND
PAINTING OF FABRICATED MATERIALS USED ON THE
POLE AND NUMBERING WITH COST OF PAINT AS PER
STANDARD SPECIFICATION BUT EXCLUDING
ERECTION OFGUY SETS AND EARTHING.
ERECTION OF SINGLE POLE STRUCTURES WITH
MOUNTING OFAB SWITCH, HG FUSES,
TRANSFORMERS, LIGHTENINGARRESTOR,
DISTRIBUTION BOX. ON 9 to 11 METERS RSJ POLE
INCLUDING EXCAVATION OF PITS AND REFILLING OF
EARTH, CARTING OF TRANSFORMERS FROM STORES
TO SITE, FIXING OF CHANNELS, SUPPORTING
ANGLES, BRACINGS CROSS ARMS CLAMPS,
ANTICLIMBING DEVICES DANGER BOARDS,
CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND
PAINTING OF FABRICATED MATERIALS USED ON THE
POLE AND NUMBERING WITH COST OF PAINT AS PER
STANDARD SPECIFICATION BUT EXCLUDING
ERECTION OFGUY SETS AND EARTHING.
ERECTION OF PSC POLES OF 10 *270 KG INCLUDING
EXCAVATION OF PIT AND REFILLING OF EARTH,
FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-
CLIMBING DEVICES, INSULATORS ETC. COMPLETE
AND PAINTING OF FABRICATED MATERIALS USED ON
THE POLES AND NUMBERING WITH COST OF PAINT
AS PER STANDARD SPECIFICATION BUT EXCLUDING
ERECTION OF GUY SET AND EARTHING.
ERECTION OF DOUBLE POLE STRUCTURE OF
METERS 270 KG PSC POLES INCLUDING EXCAVATION
OF PITS & REFILLING OF EARTHING, FIXING OF
CHANNELS, SUPPORTING ANGLES, CLAMPS, ANTI-
CLIMBING DEVICES DANGER BOARDS, INSULATORS
ETC.COMPLETE AND PAINTING OF FABRICATED
MATERIALS USED ON THE POLES AND NUMBERING
WITH COST OF PAINT AS PER STANDARD
SPECIFICATION BUT EXCLUDING ERECTION OF GUY
SETS AND EARTHING. (WITHOUT AB SWITCH)
STRINGING OF 100MM2 ACSR/100MM2 AAAC ONE
30 9926000030 CONDUCTOR FOR 11/22KV & LT LINES INCLUDING COND
FIXING OFINSULATORS, BINDING JUMPERING ETC. PER KM
STRINGING OF DOG CONDUCTOR FOR 11/22 KV & HT ONE
31 9926000031 LINES INCLUDING FIXING OF INSULATORS, BINDING COND
JUMPERING ETC. PER KM
ERECTION OF DOUBLE POLE STRUCTURES WITH
MOUNTING OF AB SWITCH, HG FUSES,
TRANSFORMERS, LIGHTENING ARRESTORS,
DISTRIBUTION BOX. OF 10 METERS 270 KGAND
PSC POLES INCLUDING EXCAVATION OF PITS AND
REFILLING OF EARTH, CARTING OF TRANSFORMERS
FROMSTORES TO SITE, FIXING OF CHANNELS,
SUPPORTING ANGLES, BRACINGS CROSS ARMS
CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS,
CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND
PAINTING OF FABRICATED MATERIALS USED ON THE
POLES AND NUMBERING WITH COST OF PAINT AS
PER STANDARD SPECIFICATION BUT EXCLUDING
ERECTION OF GUY SETS AND EARTHING.
DISMENTALLING OF 8 MTR PSC POLE WITH
CREDITING OF FABRICATION AT STORE & STACKING
OF POLE SAFELY ON ROAD SIDE OR CREDITING TO
DEPARTMENTAL STORE
DISMENTALLING OF 10 MTR PSC POLE WITH
CREDITING OF FABRICATION AT STORE & STACKING
OF POLE SAFELY ON ROAD SIDE OR CREDITING TO
DEPARTMENTAL STORE
DISMENTALLING OF TRANSFORMER CENTRE (8 MTR
PSC POLE) (WITH TRANSFORMER) WITH CREDITING
35 9926000035 OF FABRICATION & TRANSFORMER AT STORE & No.
STACKING OF POLE SAFELY ON ROAD SIDE OR
CREDITING TO DEPARTMENTAL STORE
DISMENTALLING OF TRANSFORMER CENTRE (8 MTR
PSC POLE) (WITHOUT TRANSFORMER) WITH
36 9926000036 CREDITING OF FABRICATION AT STORE & STACKING No.
OF POLE SAFELY ON ROAD SIDE OR CREDITING TO
DEPARTMENTAL STORE
STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM
INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL
DESIGN SUSPENSION / TENSION CLAMP, FIXING OF
CROSS ARM, LT SHACKLE INSULATOR ETC. FOR
FIXING OF MESSENGER WIRE AND TO PROVIDE
SERVICE CONNECTION ON AERIAL BUNCH CABLE BY
INSULATED PIERCEING CONNECTORS THROUGH
SERVICE CONNECTION BOX COMPLETE AS REQUIRED
& DIRECTED BY ENGINEER IN CHARGE.
STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ
MM+1*35 SQ MM INCLUDING FITTING OF ALL
ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /
TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE
38 9926000038 INSULATOR ETC. FOR FIXING OF MESSENGER WIRE KM
AND TO PROVIDE SERVICE CONNECTION ON AERIAL
BUNCH CABLE BY INSULATED PIERCEING
CONNECTORS THROUGH SERVICE CONNECTION BOX
COMPLETE AS REQUIRED & DIRECTED BY ENGINEER
STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM
INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL
DESIGN SUSPENSION / TENSION CLAMP, FIXING OF
CROSS ARM, BINDING TO PIN INSULATOR,
PREPARING SHACKLE POINT, JUMPERS ETC. AS
REQUIRED & DIRECTED BY ENGINEER IN CHARGE
STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ
MM INCLUDING FITTING OF ALL ACESSARIES I.E.
SPECIAL DESIGN SUSPENSION / TENSION CLAMP,
FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,
PREPARING SHACKLE POINT, JUMPERS ETC. AS
REQUIRED AND DIRECTED BY ENGINEER IN CHARGE
STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ
MM+ 35 SQ MM INCLUDING FITTING OF ALL
ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /
41 9926000041 TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE KM
INSULATOR ETC. FOR FIXING OF MESSENGER WIRE
AND TO PROVIDE SERVICE CONNECTION ON AERIAL
BUNCH CABLE BY INSULATED PIERCEING
CONNECTORS THROUGH SERVICE CONNECTION BOX
COMPLETE AS REQUIRED & DIRECTED BY ENGINEER
DISMENTALING OF RSJ (9/11 METER) POLE AND
CREDITING THE OLD MATERIAL TO STORE
DISMENTALING OF TRANSFORMER CENTER ON
10MTR,270KG PSC POLE (WITHOUT TRANSFORMER)
43 9926000043 WITH CREDITING OF FABRICATION AT STORE AND No.
STACKING OF POLE SAFELY ON ROAD SIDE OR
CREDITING TO DEPARTMENTAL STORE
DISMENTALING OF TRANSFORMER CENTER ON
10MTR,270KG PSC POLE (WITH TRANSFORMER) WITH
44 9926000044 CREDITING OF FABRICATION AT STORE AND No.
STACKING OF POLE SAFELY ON ROAD SIDE OR
CREDITING TO DEPARTMENTAL STORE
DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ
45 9926000045 MM AND CREDITING FITTING OF ALL ACESSARIES KM
AND FABRICATION TO DEPARTMENTAL STORE
DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ
46 9926000046 MM AND CREDITING FITTING OF ALL ACESSARIES KM
AND FABRICATION TO DEPARTMENTAL STORE
DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ
MM AND CREDITING FITTING OF ALL ACESSARIES TO
DEPARTMENTAL STORE.
DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ
MM+1*35 SQ MM AND CREDITING FITTING OF ALL
ACESSARIES TO DEPARTMENTAL STORE.
DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ
MM+ 35 SQ MM AND CREDITING FITTING OF ALL
ACESSARIES TO DEPARTMENTAL STORE.
RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT
DOG CONDUCTOR) FOR 11/22KV & LT LINES
INCLUDING FIXING OF INSULATORS, BINDING
RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT
LINES INCLUDING , BINDING JUMPERING ETC.
LABOUR CHARGE FOR THE INSTALLATION OF NEW
DTR METER. (METER WILL BE PROVIDED BY DGVCL)
LABOUR CHARGE FOR THE REPLACEMENT OF DTR
53 9926000053 METER AND OLD METER SHOULD BE CREDITED TO No.
SDN STORE. (METER WILL BE PROVIDED BY DGVCL)
LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR
54 9926000054 METER CONNECTION. (CT COIL WILL BE PROVIDED PER CT
LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR
DTR METER CONNECTION AND OLD CT SHOULD BE
CREDITED TO SDN STORE. (CT COIL WILL BE
PROVIDED BY DGVCL)
LABOUR CHARGE FOR FIXING OF MMB FOR DTR
METER (MMB WILL BE PROVIDED BY DGVCL)
LABOUR CHARGE FOR REPLACEMENT OF DTR METER
BOX. (METER WILL BE PROVIDED BY DGVCL)
PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE
58 9926000058 COPPER CABLE 3.5 METER (CABLE TO BE PROVIDED No.
LABOUR CHARGE FOR PROVIDING/RECONNECTION OF
59 9926000059 TERMINAL CONNECTION WITH PROPER SIZE OF
LUGS. (LUGS COST IS BORNE BY AGENCY)
LABOUR CHARGE FOR THE SPOT READING OF DTR
METER WITH DETAIL SURVEY OF DEFECT IF ANY. A
DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY
IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO PER
SDN OFFICE.(* ONLY IF ALL PARAMETER OF DTR
VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-
FORMA IS FILLED) AS PER THE INSTRUCTION OF
ENGINEER IN-CHARGE.
LABOUR CHARGE FOR THE SPOT READING OF DTR
METER WITH DETAIL SURVEY OF DEFECT IF ANY. A
DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY
61 9926000061 IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO
SDN OFFICE. (DULY FILL PER-FORMA IN FAULT
CONDITION IN WHICH READING PARAMETER IS NOT
SHOWN IN METER)
INSTALLATION OF DTR METER INCLUDING METER
BOX, PROVIDING & FIXING OF 1.5SQ MM SINGLE
STRAND 10 CORE ARMOURED COPPER CABLE
(3.5METER), TERMINATION IN METER & COIL
ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE
PROVIDED BY DGVCL)
INSTALLATION OF DTR METER INCLUDING METER
BOX, TERMINATION IN METER & COIL ETC.
(WITHOUT 10CORE COPPER CABLE) (METER, METER
BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)
Binding of messenger Conductor at a distance not more
than 0.75 mtr with 6 turns minimum on XLPE Cable
with single strand binding wire (including cost of
Supply and Installation of 11/22 kV Distribution
Transformers HT Terminal protector (UV Resistance) PER
with using 95/120/150 sq.mm long barrel aluminum SET
lug. (1Set = 3 Nos i.e. on R, Y, B)
Supply & Installation of HT EPR Tap on 11/22 kV
Distribution Transformer with replacement of bare
conductor by HT ABC conductor (DO bottom side to PER
transformer) after removal of semi-conductor by HT SET
ABC (6 inch both side). HT ABC to be supplied by
DGVCL. (1Set = 3 Nos i.e. on R, Y, B)
Supply, Installation, Testing and Commissioning of
Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)
67 9926000088 Type, Earth Electrodes for HT Feeder Pole Having 2000 NO
mm Electrode Length as per the Tender Specifications
and Drawing. (All Materials Will Be Supplied By Agency)
Supply, Installation, Testing and Commissioning of
Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)
68 9926000089 Type, Earth Electrodes for HT Feeder Pole Having 3000 NO
mm Electrode Length as per the Tender Specifications
And Drawing. (All Materials Will Be Supplied By Agency)
Supply and Installation of 25 X 3 mm GI Strip having
hot dip- galvanized-zinc coating of 80-100 microns
without any joints or welding. Both the end of the GI
strip should be connected with GI nut bolts and
required fabrication work for giving separate earthing
(1) Neutral of the transformer
(2) MS structures of the transformer center
(Approximately 25 meter GI strip per transformer
- as per requirement and instruction of Engineer
in- charge) (All Materials will be supplied by Agency)
Supply and Installation of uPVC standard make Pipe of
1.25" diameter for covering GI strip with UV protected
Cable Ties of 550 X 7.6 mm size to bind with pole
face(Approximately 25 meter uPVC pipe for GI strip
covering per transformer centre -as per requirement
and instruction of Engineer in-charge.
Supply & fixing of upto 33 kV Conductor sleeve for
Busbar to Drop out Fuse and Drop out fuse to
71 9926000093 Transformer H.T. including Busbar (12 mm sleeve) as Per TC
per technical specification. (All Materials will be
supplied by Agency)
Supply & fixing of upto 33 kV Conductor sleeve for
Busbar to Drop out Fuse and Drop out fuse to
72 9926000100 Transformer H.T. without Busbar (12 mm sleeve) as Per TC
per technical specification. (All Materials will be
supplied by Agency)
Supply & fixing of upto 33 kV Conductor sleeve for
Busbar to Drop out Fuse and Drop out fuse to
73 9926000094 Transformer H.T. including Busbar(15 mm sleeve) as Per TC
per technical specification. (All Materials will be
supplied by Agency)
Supply & fixing of upto 33 kV Conductor sleeve for
Busbar to Drop out Fuse and Drop out fuse to
74 9926000101 Transformer H.T. without Busbar(15 mm sleeve) as per Per TC
technical specification. (All Materials will be supplied by
Supply & fixing of Disc type Red Color FRP(Non-
75 9926000095 flammable) material with Weather resistant, Non- NO
conductive bird guard OD=300 MM, ID=33 MM, Width
=1.25 MM, one side cut from ID to OD. (All Materials
will be supplied by Agency)
Providing and fixing of LT Terminal protectors i.e. Re-
useable boot (LT Side 1.1 kV) including LT (1.1 kV)
insulating taps. All live part at LT side shall be covered
with fixing of LT insulating taps.
77 Nylon Net around Transformer Center
77.1 9926000097 Nylon Net (12 * 15 ft) Per Net
77.2 9926000098 Nylon Dori Per TC
Labour charge for fitting Nylon Net (All fabricated
77.3 9926000099 material for fitting nylon net shall be provided by Per TC
-::- SCHEDULE – ‘B 2’: FOR MAINTENANCE -::-
Item Code Details of works Unit FY 2024-25
(A) LINE MAINTENANCE
1 9924000001 Cutting of Tree branches surrounding HT/LT line
Replacement of old jumpers & providing new double
2 9924000002 jumpers with 8" binding [D Type] & capsuling with No.
3 9924000005 Support pole for Stay PSC/STP/RSJ No.
4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.
Pin binding of conductor 11/22kv Pin insulator per pole
in coastal area with cleaning .
6 9924000008 Pin binding of conductor LT shakel insulator No.
7 9924000009 Replacement of one/both disc.insulator at strain pole No.
8 9924000010 Replacement of LT shackle insulator at cut point No.
9 9924000011 Refixing of V cross Arm No.
Replacement of V cross Arm (With Transportation &
11 9924000013 Refixing of Top fitting in proper position No.
12 9924000014 Replacement of Top fitting No.
13 9924000015 Replacement of LT cross Arm No.
Providing DO fuse on DP with carting & jumpering
Numbering of pole with paint by preparing back
15 9924000017 ground of one colour and have lettering(height 3" * No.
width 0.5") using stencil
16 9924000018 Fixing of MMB(1PH.) at consumer end No.
17 9924000019 Fixing of MMB(3PH.) at consumer end No.
18 9924000020 Replacement of (1ph.) meter for Urban area No.
19 9924000021 Replacement of (1ph.) meter for Rural area No.
painting consumer no. on MMB (Urban) (with letter
size height 40mm* width 8mm)
painting consumer no. on MMB (Rural) (with letter
size height 40mm* width 8mm)
22 9924000024 Replacement of deteriorated Single phase Service line No.
Fixing of new dist. Box with complete wiring including
clamps, nut bolts etc.
Repairing of guarding involving reshaping of bearer
wire cross lacing binding etc.
Painting of steel fabricated material of RSJ DO DP
structure with paint
Painting of steel fabricated material of RSJ pole
mounted transformer double pole structure with paint
Painting of steel fabricated material of RSJ single pole
painting of steel fabricated material of PSC Single pole
(HT line) with paint
painting of steel fabricated material of PSC DO DP
double pole with paint
painting of steel fabricated material of PSC double
pole at pole mounted transformer with paint
31 9924000033 Providing line separator single phase No.
32 9924000034 Providing line separator three phase No.
Replacement / Providing of stay insulator along with
adjustment of tension in stay wire
Replacement of deteriorated /providing LT dist. Box
with new up to 100KVA capacity & crediting it to store.
Replacement of deteriorated /providing LT dist. Box
35 9924000037 with new above 100KVA capacity & crediting it to No.
36 9924000038 Adjustment of tension in stay wire No.
37 9924000039 Refitting of LA No.
Converting pin point to Shackle point including
38 9924000040 location
dismantling & restringing etc.
replacement of 11KV Pin insulator with providing new
double pin binding
replacement of 22KV Pin insulator by new 11kv pin
40 9924000042 insulator with spares & providing new double pin No.
Providing 11kv double disc insulators with binding &
Replacement of existing 11kv conductor (all size) with Cond/K
new double pin binding M
43 9924000046 Plumbing of PSC Pole with straightening at pin point No.
Plumbing of PSC Pole with straightening at tension
Plumbing of tilted DP structure (PSC/RSJ/STP) with
refilling of stone Murrum etc.
Providing new 11kv AB /GO switch with fabrication and
insulated colour code jumper, binding, lugs etc
Replacement of old 11kv AB /GO switch with providing
new insulated jumper, binding, lugs etc
Providing cage type loop guard in vertical LT line with per
using PVC reel insulators etc pole
Labour charges for replacement /providing of MMB &
service with all accessories for three phase connection
Labour charges for replacement /providing of MMB &
service with all accessories for single phase connection
Dismantling of existing Dist.X'mer center(RSJ /STP
51 9924000055 POLE) 25/63/100/200 KVA with all fabrication & No.
crediting the old material to store
52 9924000056 Disconnection from LT pole 1 phase No.
Reconnection from LT pole 1 phase
( payment after receipt of R/C charges)
54 9924000058 Disconnection from LT pole 3 phase No.
Reconnection from LT pole 3 phase
( payment after receipt of R/C charges)
Dismantling & removing of service line from pole &
crediting to S/dn (1 ph.)
Dismantling & removing of service line from pole &
crediting to S/dn (3 ph.)
Reconnection of service line complete with PVC cable
Reconnection of service line complete with PVC cable
Providing spiral type earthing by G.I. NO 8(weight 2kg
-5mtr in length) with salt and coal 10kg each,
including pvc rigid pipe 20mm dia ( 1.5mtr length) to
pass exposed part of G.I. wire at consumer end with
all materials, earth resistance should be less than
Providing and fixing of single core 1.5 sq mm single
strand copper insulated cable with cable nail clip for
spiral type earthing at consumer end. The end of G.I.
no 8 is to be connected by connector with copper
61 9924000070 cable of which other end shall be connected to the
earth terminal of meter box. This item shall be used in
location where there is more distance between earth
terminal and earthing terminal of meter. (All materials
supplied by contractor)
9924000065 Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM
including fitting of all accessories i.e. special design
suspension / tension clamp, fixing of cross arm, LT
shackle insulator etc. for fixing of messenger wire and
inclusive of dismantling charge of existing bare
62 conductor and crediting in to store & dismantling of KM 8922/-
service line from LT bare conductor and to provide
service connection on Aerial Bunch Cable by insulated
piercing connectors through service connection box
complete as required & directed by Engineer in
9924000066 Stringing of LT ABC of 3*50 SQ MM +1*25 SQ
MM+1*35 SQ MM including fitting of all accessories
i.e. special design suspension / tension clamp, fixing of
cross arm, LT shackle insulator etc. for fixing of KM 22303/-
messenger wire and inclusive of dismantling charge of
existing bare conductor and crediting in to store &
dismantling of service line from LT bare conductor and
to provide service connection on Aerial Bunch Cable by
insulated piercing connectors through service
connection box complete as required & directed by
Engineer in Charge.
9924000067 Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM
including fitting of all accessories i.e. special design
suspension / tension clamp, fixing of cross arm,
binding to pin insulator, preparing shackle point,
jumpers etc. and inclusive of dismantling charge of
existing bare conductor and crediting in to store
complete as required & directed by Engineer in
9924000068 Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM
including fitting of all accessories i.e. special design
suspension / tension clamp, fixing of cross arm,
65 binding to pin insulator, preparing shackle point, KM 55019/-
jumpers etc. and inclusive of dismantling charge of
existing bare conductor and crediting in to store
complete as required & directed by Engineer in Charge
9924000069 Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+
35 SQ MM including fitting of all accessories i.e. special
design suspension / tension clamp, fixing of cross arm,
LT shackle insulator etc. for fixing of messenger wire
and inclusive of dismantling charge of existing bare
66 conductor and crediting in to store & dismantling of KM 15613/-
service line from LT bare conductor and to provide
service connection on Aerial Bunch Cable by insulated
piercing connectors through service connection box
complete as required & directed by Engineer in
Total of schedule B1 & B2
(+)_______%Above, (-)_______%Below, Rate to
Net Total of Schedule ‘B1 & B2:
Amount in Words: (Ten Lacs Only)
1. Whatever Steel Material removed after replacement should be credited to Store.
2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.
3. Contractor has to carry out work under Bilimora Rural (Antaliya) Sub-Division under
Valsad-Rural Division.
4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary
accessories to the contractor.
5. The rates are inclusive of dismantling charges of existing bare conductor and crediting in
to store & dismantling of service lines from LT bare conductor and to provide service
connections on ABC by insulated pierce connectors through service connection box.
6. The contractor has to collect all the required materials from DGVCL store as well as credit
the dismantle material to the DGVCL store at their cost.
7. DGVCL will provide key material like M.S. materials, ABC/Bare conductors, PSC/RSJ Poles,
Insulators, Fabricated materials etc. to the contractor.
8. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding
rods confirming to the relevant ISI specification and as directed by Engineer in charge.
9. Necessary electricity connection for fabricated items shall be provided by DGVCL on
payment of required charge for connection & electricity bill of the same shall be paid by the
10. All the rates are inclusive of PF and Exclusive of GST applicable time to time.
11. All steel material are to be painted as below:
(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles
& steel fabricated materials of RSJ/PSC poles is must.
(b) Two coats of approved ISI mark red oxide (primer) are to be properly painted for
the RSJ poles & steel fabricated materials of RSJ/PSC poles.
12. Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver
paint) is to be properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC
Executive Engineer (O&M)
Valsad Rural Division.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GENERAL TERMS and CONDITIONS.pdf
Notice Inviting Tender.pdf
Schedule-B.pdf
TECHNICAL BID.pdf
TECHNICAL SPECIFICATIONS FOR THE WORK.pdf
Amend an Arbitration Clause.pdf
Download all tender documents and submit your bid