Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹49.5 L+₹3.5 L (7.54%)Rejected-Finance PO KETEKIBARI DISTT SONITPUR TEZPUR ASSAM 784001 | SONITPUR | ASSAM | 784001 | L2 | Rejected-Finance NOT L1 | |
| 3 | L3₹54.4 L+₹8.4 L (18.3%)Rejected-Finance OLD MISSAMARI PO PS MISSAMARI DISTT SONITPUR ASSAM PIN 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance NOT L1 | |
| 4 | L4₹55.5 L+₹9.4 L (20.5%)Rejected-Finance | L4 | Rejected-Finance NOT L1 | |
| 5 | L5₹55.5 L+₹9.5 L (20.6%)Rejected-Finance VILL BHELOWATER PO BORJULI PS RANGAPARA DIST SONITPUR ASSAM 784504 | SONITPUR | ASSAM | 784504 | L5 | Rejected-Finance NOT L1 |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
28 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TEZPUR
GE AF TEZPUR TEZPUR PO SALONIBARI DISTRICT SONITPUR ASSAM 784104
PROVISION OF YELLOW METALLIC BOARD FOR FIRE POINTS AT VARIOUS LOCATION AND PROVN OF HIGH PRESSURE OVERHEAD WATER FILLING POINT AT ATC AT AF STN TEZPUR UNDER GE AF TEZPUR
2023_MES_589470_1
GE/AF/TEZ/8863/E8
Open Tender
Electrical and Maintenance Works
Works
180 days
TEZPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF TEZPUR
₹87,000
23 Aug 2023
14 Apr 2023
1 May 2023
14 Apr 2023
28 Apr 2023
23 Apr 2023
Amount
Site clearance complete all as specified and directed.
Excavation in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable, etc. n exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and directed.
Returning filling in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
Removing excavated soils to a distance not exc.50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each not exc. 0.5 cu.m, in soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.
Supply and filling in dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables complete all as specified and directed.
Material and labour for, broken stone or boulders hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
Materials and labour for, plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Materials and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
Supply and laying of sub class ‘B’, bricks, old size, in cable trenches, as cable protection complete all as specified and directed.
Supply and fix for, mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
Supply and fix for 1.6mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
Supply and fix for mild steel work such as bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 including necessary welding, bending cold or hot, drilling holes for bolts in any shape or size complete all as specified and directed.
Supply and fix for, rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290, Grade E-165 complete all as specified and directed.
Supply and fix for, mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10mm dia of shank and length of bolt not exc.5cm, complete all as specified and directed.
Material and labour for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
Material and labour for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete al as specified and directed.
Materials and labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surface in walls and finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for finishing walls with acrylic smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed.
Roughening of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc., brushing neat cement slurry with 3.0 kg of cement per sqm and providing 50mm thick plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in floor/ plinth protection including finished the surfaces even and smooth without using extra cement, complete all as specified and directed.
Material and labour for bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 10mm wide and 50mm depth as in joint filling in plinth protection complete all as specified and directed.
Material and labour for 100mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of new steel or iron surfaces of any description, not exc.10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and directed.
Materials and labour for galvanized steel tubing, medium grade, 100mm bore with all fittings laid in trenches, complete all as specified and directed.
Materials and labour for galvanized steel tubing, medium grade, 80mm bore with all fittings laid in trenches, complete all as specified and directed.
Materials and labour for galvanized steel tubing, medium grade, 50mm bore with all fittings laid in trenches, complete all as specified and directed.
Materials and labour for galvanized steel tubing, medium grade, 25mm bore with all fittings laid in trenches, complete all as specified and directed.
Supply and fix for gun metal, globe or gate valves, with iron wheel head, screwed both ends for 25mm bore iron pipe complete all as specified and directed.
Supply and fix for 100 mm bore cast iron sluice valve with flange ends heavy duty class PN-1.6, long body type, ISI marked (IS-14846-2000), drilled holes for bolt, comprising of brass spindle and cast iron operated handle with necessary rubber gasket joint with nut and bolts fixed to GI mains complete all as specified and as directed.
Supply and fix for 80 mm bore cast iron sluice valve with flange ends heavy duty class PN-1.6, long body type, ISI marked (IS-14846:2000), drilled holes for bolt, comprising of brass spindle and cast iron operated handle with necessary rubber gasket joint with nut and bolts fixed to GI mains complete all as specified and as directed.
Supply and fix for cast iron flanged foot valve with stainer, lift type with single disc, size of 100mm bore, ISI marked (IS-4038:1986) (Reaffirmed 2005) including provision of carbon steel nuts, bolts and washers, rubber guskets etc fixed to column pipe complete all as specified and as directed.
Supply and fix for flat three core, PVC insulated industrial cable for monoblock motor, 10 sqmm (nominal area) with multistranded copper conductor, 1100 volts grade conforming to IS-694 complete all as specified and directed.
Supply, installation, testing and commissioning of monoblock pump set suitable for 415 volts, 50 Hz, 3 phase system having capacity 10HP, suction and delivery of maximum 18 LPS at 28 meterhead, motor and pump with all accessories including making connection to inlet and delivery pipe line 100 x 100mm dia including necessary foundation to place the motor complete all as specified and directed.
Material and labour for construction of brick masonry valve pit chamber of size 120cm x 120cm x 120cm depth (internal dimension) with sub class 'B' brick, old size brick with one brick thick wall in CM (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone crushed aggregate) as in foundation, 15mm thick rendering in CM (1:4) internally and externally up to 150 mm below ground level, provision of valve pit cover made out of 3mm thick MS plate welded with 40 x 5mm thick FI frame all round including provision of hinges, handle, locking arrangement, ISA 40 x 40 x 5mm thick frame, fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC (1:2:4) type B1 (Block size 230 x 200 x 100mm) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to all steel surfaces including preparation of surfaces, necessary earth work in soft/ loose soil complete all as specified and directed.
Material and labour for construction of brick masonry valve pit chamber of size 90cm x 90cm x 90cm depth (internal dimension) with sub class 'B' brick, old size brick with one brick thick wall in CM (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone crushed aggregate) as in foundation, 15mm thick rendering in CM (1:4) internally and externally up to 150 mm below ground level, provision of valve pit cover made out of 3mm thick MS plate welded with 40 x 5mm thick FI frame all round including provision of hinges, handle, locking arrangement, ISA 40 x 40 x 5mm thick frame, fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC (1:2:4) type B1 (Block size 230 x 200 x 100mm) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to all steel surfaces including preparation of surfaces, necessary earth work in soft/ loose soil complete all as specified and directed.
Material and labour for cutting the road/ hard standing and making good disturbed surface by using PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for fixing the pipe complete all as specified and directed. (Note: Excavation size shall be of 45cmx75cm)
Material and labour for cutting of pavement quality concrete of flextural strength 40 Kg/ Sqcm or more in tarmac by mechanical or manual diamond cutter machine without disturbing surrounding tarmac and cleaning the cutting area of tarmac disposed the rubbish outside the MOD land complete all as specified and directed.
Supply and fix for rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290, Grade E-165, including preparation of surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and directed.
Supply, laying, jointing and testing of LT, XLPE insulated, PVC sheathed,armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 16 Sq. mm, 4.0 core, complete all as specified and directed.
Supply, installation, testing and commissioning of factory made LT Panel Board (CPRI approved), AC 415 volts, 50 Hz, 3 phase, 4 wire of over all size 1.0m (H) x 0.6m (W) x 0.6m (D) suitable for accommodating the following accessories, totally enclosed self supporting structure/ cubical, fully compartmentalized type weather proof protection IP-65 suitable for out door use, with bottom cable entry with suitable cable glands, accessories prewired with suitable size FRLSH PVC insulated multistranded copper conductor, structure made out of 3.15mm thick, CRCA steel sheets with angle iron frame work of ISA-50 x 50x 6mm thick suitable for mounting on PCC foundation platform, with suitable mounting arrangement for bus bars and accessories double hinge doors st front with suitable locking arrangement and bolted rear opening opening shutters, with suitable locking arrangement , provision of louvers at sides, structure treated under 8-tank metal treatment process and duly powder coated including necessary earth work, complete all as specified and directed. BUS BAR CHAMBER (a) Sheet steel bus bar chamber having front hinged covers with a set of electrolytic grade high conductivity TPN solid anodized copper bus bars rated 200 amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bus bars shall be colour coded at required intervals for identification - 01 (set of 4).
INCOMMER (a) MCCB 63 Amps Thermal Magnetic release , 415 volts, 4 pole, 25 KA - 01 No. (Make L&T/Siemens/ Legrand / ABB) OUTGOING FEEDERS (a) MCB 63 Amps, 415 volts, 4 pole, 25 KA - 01 (Make L&T/Siemens/ Legrand / ABB) (b) MCB 32 Amps, 415 volts, 3 pole, 25 KA - 02 Nos (Make L&T/Siemens/ Legrand / ABB) (c) Fully automatic star delta starter 10 HP, 415 volts, 50 Hz, 3bh motor-02 Nos (Make L&T/Siemens/ Legrand / ABB) (d) Single phase preventor suitable for 10 HP - 02 Nos. (Make L&T/Siemens/ Legrand / ABB) INDICATING DEVICES (a) LED indicating lamp for main supply indicating 'R', 'Y', 'B' - 01 set of 3 (Make L&T/Siemens/ Legrand / ABB) (b) Digital voltmeter (96mmx96mm) 0-500 volts - 01 No. (Make AE /BCH/ L&T) (c) Digital Ammeter 0-400 Amps, square type (96mmx96mm) - 01 No.(Make AE /BCH/ L&T)
Supply, installation, testing and commissioning of factory made LT Panel Board (CPRI approved), AC 415 volts, 50 Hz, 3 phase, 4 wire of over all size 1.0m (H) x 0.6m (W) x 0.6m (D) suitable for accommodating the following accessories, totally enclosed self supporting structure/ cubical, fully compartmentalized type weather proof protection IP-52 suitable for out door use, with bottom cable entry with suitable cable glands, accessories prewired with suitable size FRLSH PVC insulated multistranded copper conductor, structure made out of 3.15mm thick, CRCA steel sheets with angle iron frame work of ISA-50 x 50x 6mm thick suitable for mounting on PCC foundation platform, with suitable mounting arrangement for bus bars and accessories double hinge doors st front with suitable locking arrangement and bolted rear opening opening shutters, with suitable locking arrangement , provision of louvers at sides, structure treated under 8-tank metal treatment process and duly powder coated including necessary earth work, complete all as specified and directed. BUS BAR CHAMBER (a) Sheet steel bus bar chamber having front hinged covers with a set of electrolytic grade high conductivity TPN solid anodized copper bus bars rated 200 amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bus bars shall be colour coded at required intervals for identification - 01 (set of 4).
INCOMMER (a) MCCB 63 Amps Thermal Magnetic release , 415 volts, 4 pole, 25 KA - 01 No. (Make L&T/Siemens/ Legrand / ABB) OUTGOING FEEDERS (a) MCB 63 Amps, 415 volts, 4 pole, 25 KA - 01 (Make L&T/Siemens/ Legrand / ABB) (b) MCB 32 Amps, 415 volts, 3 pole, 25 KA - 01 Nos (Make L&T/Siemens/ Legrand / ABB) (c) Fully automatic star delta starter 10 HP, 415 volts, 50 Hz, 3bh motor-01 Nos (Make L&T/Siemens/ Legrand / ABB) (d) Single phase preventor suitable for 10 HP - 01 Nos. (Make L&T/Siemens/ Legrand / ABB) INDICATING DEVICES (a) LED indicating lamp for main supply indicating 'R', 'Y', 'B' - 01 set of 3 (Make L&T/Siemens/ Legrand / ABB) (b) Digital voltmeter (96mmx96mm) 0-500 volts - 01 No. (Make AE /BCH/ L&T) (c) Digital Ammeter 0-400 Amps, square type (96mmx96mm) - 01 No.(Make AE /BCH/ L&T)
Materials and labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.50m below normal ground level connected to galvanised steel earth lead strip 32 mm x 6 mm by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No 3 of SSR Part –I (2009) including testing on completion.
Material and labour for, 32 x 6mm size GI strips earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed.
VARNI BUILDERS
M/S TANISHQ CONSTRUCTIONS
DRISTEE ASSOCIATES
S H ENTERPRISES
M/S Jiban Krishan Das and Co
M/S CHUNILAL SHOME
M/S Kangkans
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .