Construction of 01 (One) Light vehicle shade for 04(four Car) by providing tubular trusses _Galvalume sheets roofing etc. at A.Ch Rama Rao TSR Training Centre_ R.K Nagar

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (All kinds of soil)

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: a) 1:1½:3 (1 Cement : 1½ fine sand : 3 graded well burnt brick aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: b) 1:3:6 (1 Cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size)

Centering shuttering including strutting, propping etc. and removal of form work for: a) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a) Hot finished welded type tubes

Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5 x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge. a) 0.50mm thickness

Providing and laying dry flat brick flooring in required pattern complete

First class brick work in foundation and plinth including cost of all materials as required complete:- (1) In cement mortar 1:4 (1 cement : 4 fine sand).

12 mm cement plaster of mix in/c neat cement punning a) In cement mortar 1:4 (1 cement : 4 fine sand)