Loading…
Loading…
Tender ID
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
5 Mar 2026, 4:00 pmClosed
kim ind division
Tender for Supply, installation, testing & commissioning earthing system for transformer center with maintenance free, Ready capsules, Pipe in Cage (PIC) type earthing and connection to the various parts of transformer center using GI strip and GI nut bolt under Kosamba s/dn or any sdn under Kim inds. Division under various scheme.
280126
KIM/O&M/TECH/N-PROCURE/25-26/08/SR-66 DT:23-02-2026
Open
Electrical and Maintenance Works
Works
Surat
5 documents required · 5 mandatory
₹1,180
DAKSHIN GUJARAT VIJ COMPANY LTD.
₹5,000
24 Feb 2026
24 Feb 2026
24 Feb 2026
5 Mar 2026
24 Feb 2026
Sr. Details of Works Unit Qty. Rate Amount
SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF
MAINTENANCE FREE, READY CAPSULE, PIPE-IN-CAGE (PIC)
1 TYPE, EARTH ELECTRODES FOR HT FEEDER POLE HAVING Nos.
2000 MM ELECTRODE LENGTH AS PER THE TENDER
SPECIFICATIONS AND DRAWING
SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF
MAINTENANCE FREE, READY CAPSULE, PIPE-IN-CAGE (PIC)
2 TYPE, EARTH ELECTRODES FOR HT FEEDER POLE HAVING Nos.
3000 MM ELECTRODE LENGTH AS PER THE TENDER
SPECIFICATIONS AND DRAWING
Supply and installation of 25 X 3 mm GI Strip having hot dip-
galvanized-zinc coating of 80-100 microns without any joints
or welding. Both the end of the GI strip should be connected
with GI nut bolts and required fabrication work for giving
separate earthing connections to
(1) Neutral of the transformer
(2) MS structures of the transformer center Lighting
Arrestor(Approximately 25 meter GI strip per transformer
- as per requirement and instruction of Engineer in-
(3)Earth Pits Required for three separate earthing.
Supply and installation of uPVC standard make Pipe of 1.25"
diameter for covering GI strip with UV protected Cable Ties of
550 X 7.6 mm size to bind with pole face(Approximately
4 meter uPVC pipe for GI strip covering per transformer centre Mtr.
-as per requirement and
instruction of Engineer in-charge)
Total Estimate Rs….
1. GST Unregistered Contractors /Suppliers /Fabricators should not be allowed for the bid.
2. ERDA tested certificate should be submitted and material ERDA tested certified should be used.
File No: DGVCLDOKI/TND/e-file/6817/2026/1020/Technical
Approved By: Executive Engineer,Technical,DGVCLDOKI
Letter No: DGVCLDOKI/0758/02/2026 Approved Date: 24-02-2026
3. AUDIT TESTING WILL CARRIED OUT AT ANY GOVT/NABL APPROVED LAB, IF REQUIRED BY DGVCL
Exe. Engineer (O&M),
DGVCL, Kim Inds. Division
File No: DGVCLDOKI/TND/e-file/6817/2026/1020/Technical
Approved By: Executive Engineer,Technical,DGVCLDOKI
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Kosamba s dn Earthing 2.1.pdf
2.2 N-procure.pdf
2.3.pdf
2.4.pdf
SCHEDULE – ‘B’.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .