Construction of Vegetable Market at T.P.No-123/C (Naroda) F.P.No.-39 in Thakkarbapanagar Ward of North Zone of AMC (Reinvite)

Bill of Quantities

Description Unit Qty Rate Amount

Clearing and grubbing road land

including uprooting rank vegetation

grass bushes,shrubs,sapling and trees

girth up to 300 mm removal of stumps of

trees cut earlier and disposal of

unserviceable materials.(D) By

mechanical means in area of thorny

Barricading the entire break down or

excvated area on rental basis using

wooden ballies / M.S.angles at max.

meter centre to centre, C.G.I. Sheet,

reflective paint / Board out side to avoid

accident & for smooth traffic diversion &

movement including cautionary board

2.00 etc. Item also includes for making rmt 153 80.35

temporary sufficient nos of lighting

arrangement through out the work with

necessary required arrangement. ..The

same shall be removed after completion

of work. (Only for break down work from

start to complete) (Based on Drainage

Excavation for foundation upto 1.5 m

depth including sorting out and stacking

3.00 of useful materials and disposing off the Cumt 995 115.92

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from

1.5 m to 3.0 m including sorting out and

4.00 stacking of useful materials and Cumt 597 128.52

disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m

depth including sorting out and stacking

5.00 of useful materials and disposing off the Cumt 15 148.19

excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

Excavation for foundation upto 1.5 m

depth including sorting out and stacking

6.00 of useful materials and disposing off the Cumt 20 253.58

excavated stuff upto 50 Meter lead.(C)

Excavation for foundation for depth from

1.5 m to 3.0 m including sorting out and

7.00 stacking of useful materials and Cumt 15 160.77

disposing off the excavated stuff upto

Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from

1.5 m to 3.0 m including sorting out and

8.00 stacking of useful materials and Cumt 15 270.83

disposing off the excavated stuff upto

Meter lead.(C) Hard Murrum

Filling in plinth with sand under floors

9.00 including watering ramming, Cumt 151 455.63

consolidating and dressing complete

Filling foundation and plinth with

murrum or selected soil in layer of 20 cm

in thickness including ramming watering

and consolidating etc. complete

Earthwork in cuting in all sorts of soil

and soft murrum including conveying

and spreading the stuff, embankment as

and where directed within 200meters

from the end of the cutting with all

required lead and lift.

Filling available excavated Earth

(Excluding Rock ) in trench plinth side of

foundation . in layer not excluding 20 cm

in depth consolidation each deposited

layer by ramming and watering etc.

Conveyance charges lime murrum

building rubbish earth manure or sludge

& execavated rock and rubbish up to

Conveyance charges lime murrum

building rubbish earth manure or sludge

& execavated rock and rubbish up to

Conveyance charges lime murrum

building rubbish earth manure or sludge

& execavated rock and rubbish up to

Carring out plinth treatment to post

construction / existing structure by

spraying chemical solution for termite

control treatment including labour and

material consistment with I.S.I

specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is

recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre

chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Providing and laying cement concrete

1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal

size) and curing complete including cost

of formwork in (A) Foundation and

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (A) Foundations, footings, Base

of columns and Mass concrete.

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

Slabs,landing,shelves,Balconies Lintels,

Beams, Girders and Cantilever upto floor

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

Slabs,landing,shelves,Balconies, Lintels,

Beams, Girders and Cantilever upto floor

two level. : Ground Floor

Providing and laying controlled cement

concrete M.250 and curing complete

21.00 excluding the cost of formwork and Cumt 32 4593.9

reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and

struts, upto floor two level. : Ground

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and

struts, upto floor two level. : First Floor

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of

23.00 formwork and reinforcement for Cumt 10 4519.9

reinforced concrete work in (B) Walls,

from top of foundation

level upto floor two level

Providing TMT Bar FE 550D

reinforcement for R.C.C. work including

24.00 bending, binding and placing in Kg 62276 75.46

position complete upto floor two level :

Foundation & Ground Floor

Providing TMT Bar FE 550D

reinforcement for R.C.C. work including

25.00 bending, binding and placing in Kg 562 76.45

position complete upto floor two level :

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping and

centering below supporting floor to

26.00 ceiling not exceeding 4 M. and removal of Sqmt 813 171.68

the same for in situ reinforced concrete

concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

concrete work in. (I) Edges of slabs and

Breaks in floors and walls.

Providing formwork of ordinary timber

planking soas to give a rough finish

including centering shutter ing strutting

and propping etc. height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

and plain concrete work in. (G) Columns

PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

concrete work in. (H) (2) Sides and

soffits of Beams Beam Haunchings canti-

levers Girders Bressumers and Lintels

exceeding 1M.in Depth.

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

concrete work in. (B) Flat surfaces such

as soffits of supspened floors slabs

Landings and the like. (1) Floors etc. upto

200 mm in thickness.

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering

shuttering strutting and propping etc.

height of propping and centering below

supporting floor to

ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete

concrete work in. (C) Vertical surface

such as walls (any thickness) partitions

and the like including

attached buttresses & string course & the

Brick work using common burnt clay

building bricks having crushing strength

32.00 not less than 35 kg./Sq.Cm. in foundation Cumt 93 4011.7

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional

Brick work using common burnt clay

building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional

Brick work using common burnt clay

building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional

(i) Half brick masonry in common brunt

clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in foundation and plinth (B)

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of

single or half brick walls for interior

36.00 plastering upto floor two level and Sqmt 963 155.61

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) : Ground

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of

single or half brick walls for interior

37.00 plastering upto floor two level and Sqmt 377 178.77

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) : First

Providing 10mm thick cement plaster in

single coat on brick/concrete walls for

interior plastering upto floor two level

and finished even and smooth in (ii)

Cement mortar 1:4 (1- cement :4-sand) :

20 mm thick sand faced cement plaster

on walls upto height 10 metres above

ground level consisting of 12 mm thick

backing coat of C.M.1:3 (1-cement:3-

sand) and 8mm thick finishing coat of

C.M.1:1(1-cement:1-sand) etc. complete.

Providing and applying approved

coloured chips 20mm thick STONE

CREAT PLASTER for exterior / interior

side on wall up to full height from ground

level consisting of 12mm thick backing

coat of CM 1:3 (1 cement : 3 Bodeli sand)

and 8mm thick finishing coat of CM 1:1

(1 cement (Grey / White / Colour :

stone grit (approved coloured chips))

including providing & fixing 300mm

wide strip of chicken net at vertical and

horizontal joints of RCC and masonary

including 10mm alluminium channel for

expantion joint / grooves, curing,

necessary scaffolding in true line and

level etc. complete as directed by EIC.

P & L 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on

existing flooring by adhesive material

including dismentaling of existing

flooring and jointed with color cement

slurry including finised with flush

pointing & cleaning the surface etc.

complete for light shade

Providing and laying Vitrified tiles 8 to

10 mm thick , 24'' x 24'' in flooring treads

of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with

flush pointing in white cement.

P & L 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on

existing flooring by adhesive material

including dismentaling of existing

flooring and jointed with color cement

slurry including finised with flush

pointing & cleaning the surface etc.

complete for antiskit

Providing and laying white glazed tiles

6mm thick in skrting risers of steps and

44.00 dedo on 10mm thick cement plaster 1:3 Sqmt 91 908.17

(1-cement : 3-coarse sand) and jointed

with white cement slurry

Providing and laying 18 mm thick

polished granite stone machine cut in

single piece (Max. available) in sill and

jambs of door ,window,ventilation & lift

wall cladding,staircase flooring landing,

risers & treads, skirting laid over 10 mm

thick cement mortar 1 : 3 (1 cement :

coarse sand) and jointed with grey

cement slurry with matching pigment

incl. rubbing and polishing,half rounding

edge and incl. fixing of hilty fastener at

every 1/3 span of sill as required size etc.

complete colour and shed as approved

by architect engineer in charge.

Providing and laying polished Kota stone

slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty

46.00 :1.5 - coarse sand) laid over and jointed Sqmt 935 982.83

with grey cement slurry mixed with

pigment to match the shade of slab

including rubbing and polishing etc.

complete. (A) 25mm thick

Providing and fixing M.S. grills of

required pattern to wooden frames of

windows etc. with M.S. flats at required

spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

Structural steel work

(ConfirmingtoIS4923-1997) riveted,

bolted or welded in built up for all type

sections,in framed work,including

48.00 cutting,hoisting,fixing in position and Kg 28296 126.68

applying apriming coat of approved steel

primer all complete as per the structural

designs and directions of Engineer

incharge.Column(122x61x3.6mm )

Providing and fixing of Self Supported

Roofing systems with proper

overlapping and seaming b/w different

sheets without making holes or

preventing the overturning the roof by

49.00 wind addition made up from superior

quality, structural grade steel. Base metal

width 912 mm, Steel Grade : Grade D and

Thickness from 0.80 mm,1.10 mm,1.20

mm,1.30 mm,1.40 mm, 1.50 mm BMT,

0.85 mm APT with tolerance of +/-

mm, Regular Modified Polyster Imported

Color Coated Galvalume Steel having

Profiled width of 625 mm +/-10mm.

Design, supply, & fabrication of self

supported single span arch roof

fabricated from mechanically seamed

manufactured by American Hydraulic

Machines to profiles of Imported

Galvalume Cold Rolled Structural Steel

coils as per standard ASTM A792, Steel

Sheet, Aluminum-Zinc Alloy Coated by

Hot-Dip Process,Alloy Coating AZ-

150(Aluminium-55%, Zinc-43.5% &

Silicon 1.5%), Yield strength: 350 MPa,

Paint coating: Regular modified

polyester, Top coat of painting:

micron minimum (colour 20 micron and

primer 5 micron).Bottom coat of

painting: 12 micron minimum (colour

micron and primer 5 micron) using make

of ThyssenKrupps, Germany/Dongbu

Steel Co. Limited, Korea/ Corus Steels,

U.K./ Union steel(Dongkuk) Korea/ Yjeh

phuf Enterprises Ltd. Taiwan roofing

systems including corrugation from

single piece raw material eliminating

overlaps ridges & making leak proof

water tight structure. The work should

be carried out by specilialize and

approved agency only. The rate of item is

including fitting as per standard

specification. As Approved By

1.30 mm thickness Sqmt 615 3851

1.10 mm thickness Sqmt 10 3310

1.20 mm thickness Sqmt 10 3459

Providing and fixing single or double

flush door both sides laminated and

I.T.W. beading all around by using I.T.W.

frame 120 m.m. x 80m.m.. shutter

fabricated from 35 mm thick solid core

malemine faced three layered pre

laminated flat pressed wood based

exterior grade bonded BWP/BWR

synthetic resin having stamped IS

grade I type II including three coats of

lacquer polishing to exposed wooden

surfaces and Stainless steel decorative

type designs fixtures / fastening

etc.including I.T.W. triangular batten

patti of size 30m.m.x30m.m.etc. as per

architectural detailed drawing and as

directed by engineer in charge.

Providing & Laying M200 grade concrete

trimix using P21 (water reducing

concrete admixture at 100 ml per bag of

cement & recon 3 s fiber at 125 gm per

bag of cement including carrying out

vaccum dewatering and power floater

treatment in floors well compacted

mechanically vibrated finish to require

levels making C channel 75 x 75 mm

required to maintain level slope and

thickness of the concrete road leveling of

placed concrete with surface vibrator

and finishing with power floater &

trowel light brooming the surface &

including cutting & filling of expansion

joint as directed by Engineer in charge

Providing and fixing pre-cast concrete

kerb stone of gray cement based

concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret as

per approved design and including

excavation for fixing in proper line and

level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye

/ steel Dye inter locking concrete block

60mm thick with grade of concrete M300

pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling

the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018

Providing, laying, spreading and

compacting Wet Mix Macadam (as per

table 400 - 10 and 400 - 11) of well

graded stone aggregate to specification

including premixing the Material with

water at OMC in mechanical mix plant as

per approved design mix, carriage of

mixed material by Tipper to site, laying

in uniform layers with motor

grade/Front end Loader/paver finisher,

in sub base/base course on a well

prepared under base and compacting

with vibratory roller to achieve the

desired density including lighting,

guarding, barricating and maintenance of

diversion etc. (MoRTH specification :

Clause 406) by mechanical means

Applying two coats of putty & two coats

of primer of approved brand and

manufacture on new wall surface to give

55.00 an even shade including thoroughly Sqmt 1386.4 40.19

brushing the surface free from mortar

dropping and other foreign matter and

sand papered smooth.

Finishing wall with weather proof

exterior emulsion paint on wall surface

(two coats) to give an required shape

even shade after thoroughly brushing the

surface to remove all dirt,and remain sof

loose powdered materials.etc complete

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall

57.00 surface to give an even shade including Sqmt 1387 78.44

throughly brushing the surface free from

mortar droppings and other foreign

matter and sand papered smooth.

Providing and fixing extruded aluminum

Three / Two track window having

extruded aluminum Colour Powder

Coated section frame main outer size

Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x

1.10mm @ Wt. 1.205 Kg/mt,vertical

member of size 122.20mm x 31.75mm x

1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size

0.456Kg/mt,vertical member of size

0.456Kg/mt,@ with 5 mm thick

transparent bronze colour tinted float

glass with powder coated aluminum

fittings and fixtures and transparent

silicon sealant glass fixing to frame as per

details etc complete for window.

Providing and laying waterproofing

treatment for terrace including applying

neat cement slurry 2.75 kg/sq.mt. of

cement admix with waterproofing

compound after cleaning the surface. (b)

laying cement concrete using brick bats

25 to 100 mm size with 50% cement

mortar 1:5 (1-cement : 5-coarse sand)

admixed with waterproofing compound

over 20 mm thick layer of C.M.1:5 to

require slope including rounding of

junction or walls and slabs (c) after two

days of proper curing applying a second

coat of cement slurry. (d) finishing the

surface with 20 mm thick cement mortar

1:4 and finally finishing the surface with

trowel As directed with cement slurry.

(e) after finishing the whole terrace shall

be flooded with water for a period of two

Providing and laying broken chine

mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring

mortar creme out upto surface using

white cement including rounding off

junctions and extending them upto 15 cm

along the wall,clearing with water and

oxalic acid etc. as directed.

Providing, Fabricating & Fixing signage's

using 304 grade Stainless steel 1.5 mm

thick brushed steel finish plate (2 nos)

with 8mm thk. Acrylic sheet covered

with vinyl of approved colour,

sandwiched between two S.S plate and

fixed with s.s struds . Sandwiched plates

should be fixed in 12mm X 12mm S.S

1.5mm thk.304 grade frame and

61.00 punched (laser cut) lettering carried out Sqinch 100 69

on both the s.s plates of required size

and text as directed by Engineer and

hanged to ceiling with the help of S.S

8mm thick chain at both ends with

making all the fixing arrangement to the

ceiling and to the plate etc. complete all

As per drawings and design supplied by

architect and instruction given by

authority and E.I.C.

Providing and laying of Hot applied

thermoplastic compound 2.5 mm thick

including reflectorizing glass beads and

250 gms per Sq.m. area thickness of

mm is exclusive of surface applied glass

beads as per IRC-35 2015. The finished

surface to be level/uniform and free

from streaks and holes or chipping of

Thermoplastic if any and including

primer coat for C.C. surface and A.C.C.

surface, in white and/or yellow colour.

62.00 Rate includes brushing, blooming and Sqmt 100 552

cleaning and application of paint. Zebra

patta/Bump patta/Lane line/Center

line/Cut patta, Directional Arrow,

Lettering MoRT&H Clauses 803 &Volume

II Part III and IRC 35-2015.Rate shall

include brushing, brooming, painting and

repainting of worn out paint after a

period of 2.5 years.

Note:-As per drawings and design

supplied by architect and instruction

given by authority and E.I.C..

Providing, Fixing, Installation of - Self

Supported Galvalume Cladding sheet

from with proper overlapping and

seaming between different sheets

without making holes or preventing the

overturning the roof by wind addition

made up from superior quality,

structural grade steel. Base metal

thickness (BMT): 0.80 mm (tolerance as

± 0.04mm) metal width 610 mm with

tolerance of +/- 4 mm, Steel Grade :

Grade D Regular Modified Polyster

Color Coated Galvalume Steel having

63.00 Profiled width of 305 mm +/-10 mm. Sqmt 300 3812.5

Design, supply, & fabrication of Verticale

cladding sheet mechanically seamed

manufactured by American Hydraulic

Machines to profiles of Galvalume Cold

Rolled Structural Steel coils as per

standard ASTM A792, Steel Sheet,

Aluminum-Zinc Alloy Coated by Hot-Dip

Process. The work should be carried out

by specilialize and approved agency only.

The rate of item is including fitting as per

standerd specification. The vendor shall

give windload calculation before start of

the work and the vendor shall be entirely

responsible for the damage of the same

during transport, installation and even

after installation upto 5 years.

Constructing 15ft Dia. and 30 ft depth

water harvesting as per geologoical

condition, including Excavation for

harvesting upto 30ft depth including

sorting out and stacking useful materials

and disposing off the excavated stuff

64.00 upto 50 mtr lead and protect it with Job 1 354138

necessary brickwork, controlled cement

concrete M-200, PCC, filling and as per

given traditional technique design and

contractor track all necessary Equipment

for safety and work complete as per

given instruction by site incharge

Providing, fixing and construction of

sand witch type platform of 25 mm thick

Kota stone top, 100 mm wide edge full

moulded Facia Patti with 25mm thick

prepolished Kota stone of uniform size

and colour for bottom & supports at

90cm interval including necessary

cement mortar 1:2 Kota shall be fixed

in cement joints and pointing as specified

in Kitchen / Pantry / Counter /

Laboratory etc with necessary making

of edges, polishing curing daily mopping

with water and kerosene etc comp as

directed of Engineer-in-charge.

(Measured only vision finished top plan

Painting two coats (excluding priming

coat) on new steel and other metal

surface with enamel paint, brushing,

66.00 interior to give an even shade including Sqmt 150 86.94

cleaning the surface an even shade

including cleanicn the surface of all dirt,

foreign matter.

Providing and fixing FRP frame size

125x65 mm and 35mm thick FRP shutter

with wood grain raised

panneled design finish shutter having

extra reinforcement on sides & edges in

Gel coat finish.

The core of the shutter & frame is to be

filed up with injected polyurethene foam

alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures.

frame & shutter is to be water proof

weather proof, termite proof &

resistance to mild acid/alkali. Rates

are to be inclusive of S.S hinges with

fastener sleeve & alluminium fixtures &

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete.[A] 15 mm.

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [B] 20 mm.

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [C] 25 mm.

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [D] 32mm.

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [E] 40mm.

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [F] 50mm.

Supplying & erecting resin bonded flap

rock wool / glass wool with conductivity

valve 1.67 sq.mm per watt & to with

stand the temp. to 100 degree centigrade

C thickness 50mm with G I pipe of

74 following size dia "B" class as per

IS:1239. The plastic sheet to be used as

covering of glass wool. Al. cladding

besides other materials like chicken

mesh, 26 G Al. Sheet shall be used for

cladding the insulation pipe.

(A) for 20 mm dia pipe Mtr 30 360

(B) For 25 mm dia pipe Mtr 20 440

(C) for 32 mm dia pipe Mtr 20 530

(D) for 40 mm dia pipe Mtr 45 620

(E) for 50 mm dia pipe Mtr 5 760

Providing and fixing Gun metal check or

75 non-return fullway wheel valve.(C) Each 50 276

Providing and fixing Gun metal check or

76 non-return fullway wheel valve.(C) Each 50 457

Providing and fixing Gun metal check or

77 non-return fullway wheel valve.(E) Each 30 584

Providing and fixing Gun metal check or

78 non-return fullway wheel valve.(E) Each 15 821

Providing and supplying C.I. Air valves of

approved make & quality of following

class and diameter including taxes,

insurance, transportation, freight

79 charges, octroi, inspection charges, Each 50 661

loading, unloading, conveyance to

departmental stores, stacking etc.

complete. Air Valves single (S2) Type

Providing and fixing mosquito proof

stainless steel overflow grating for

Audco/Lehry/ R.B./ Spirex) 100mm dia.

Consruction of Valves chambers in brick

or bela stone masonry, locally available

in C.M. 1:6 foundation concrete 150mm

thick in CC 1:4:8 of trap metal size 25mm

to 40mm thick, inside cement plaster in

CM 1:3 and cement pointing outside in

C.M. 1:3 and top cover of precast RCC

slab 100mm thick with key hole in two

parts, each with handles or MS Bar etc.

complete as given size) Upto 1 Mt. depth

81 from G.L. to pipe invert level incl. Each 10 5380

complete civil works but excl. cost of

excavation and refilling with cast in situ

RCC slab in one single piece with fixing of

CI-MH Frame and cover (excl cost of CI-

MH Frame and cover) with 23mm thick

brick masonry wall in CM 1:6 (d) size of

chamber 0.60 m x 0.60m and 1.0mt deep

with precast slab in two parts 15mm

with single piece 10cm with fixing MH

Supply, installation, Testing and

Commissioning of 15mm Nominal

diameter Garden Hydrant with gun metal

Ball Valve, GI pipe for Flexible hose

Connection Provision and

all required accessories etc.

Providing erecting and fixing double

coated Syntex PVC. (ISI) water tank of

83 required capacity each with all necessary litre 10000 3.91

fittings and connection etc. complete on

Supplying and erecting chromium plated

84 heavy duty brass valve for inlet pipe of Nos 30 180

water heater 15 mm dia.)

Supplying and erecting 15mm brass non-

85 return valve for inlet pipe of storage Nos 30 230

Supplying and erecting dead pressure

86 releasing valve for storage type water Nos 20 380

heater with necessary materials.

Providing & erecting fibre reinforced

PVC flexible pipe with brass locking nuts

& washers & clips at both ends complete

erected without leakage

INTERNAL SWR SYSTEM

Providing and fixing to wall ceiling and

floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside

88 Dia. Low densidy, complete with special Rmt 500 116.4

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(C) 32mm

Providing and fixing to wall ceiling and

floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside

89 Dia. Low densidy, complete with special Rmt 500 124.43

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(D) 40mm

Providing and fixing to wall ceiling and

floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside

90 Dia. Low densidy, complete with special Rmt 350 165.38

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(E) 50mm

Providing and fixing to wall ceiling and

floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside

91 Dia. Low densidy, complete with special Rmt 600 332.91

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(G)110 mm

Providing and fixing to wall ceiling and

floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside

92 Dia. Low densidy, complete with special Rmt 500 274.68

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(F) 75mm

Providing and fixing PVC SWR Nahni trap

IS 14735 for drain - 100 mm diameter

with jali of the following nominal

93 diameter of self cleansing design with C.I each 60 565.43

scread down or hinged grating including

the cost of cutting and making good the

Providing and fixing PVC SWR Nahni trap

IS 14735 for drain - 75 mm diameter

with jali of the following nominal

94 diameter of self cleansing design with C.I each 40 552.83

scread down or hinged grating including

the cost of cutting and making good the

EXTERNAL SWR SYSTEM

Providing and fixing S.W. gully trap with

C.I. grating brick masonry chamber and

water tight C.I. cover with frame of

95 300mm x 300mm size (inside) with Each 40 1279.4

standard weight.(i) Square mouth traps.

(A) 100mm x 100mm size P type. (upto

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

(Double Wall) for non pressure

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 100mm

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

97 (Double Wall) for non pressure Rmt 100 373

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 150mm

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

(Double Wall) for non pressure

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 200mm

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

(Double Wall) for non pressure

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 250mm

Constructing Manhole with R.C.C. top

slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-

100 Cement : 5-coarse sand) finished with a Each 2 10921

floating coat of neat cement and making

channels in cement concrete 1:2:4 mix

(1-Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished

smooth complete including curing and

festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight

of cover and frame to be not less than

128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having

crushing strength not less than 35Kg.

/ Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (1) A type

depth 0.90 Metre for 150mm diameter

Constructing Manhole with R.C.C. top

slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-

Cement : 5-coarse sand) finished with a

floating coat of neat cement and making

channels in cement concrete 1:2:4 mix

(1-Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished

101 smooth complete including curing and Each 2 19139

festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight

of cover and frame to be not less than

128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having

crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type

depth 1.50 Metre for 150mm diameter

Providing and laying Cement concrete

1:5:10 (1-Cement : 5-Fine sand :10-

Graded stone aggregate 40mm nominal

size) bedding for stoneware pipes of

following internal diameters with

necessary formwork and curing

complete.(B) 150mm dia. (166mm Ave.

Constructing brick masonry chamber for

underground C.I. Inspection chamber

and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions

total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3

finished smooth with a floating coat of

neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for

single pipe line. (upto 10 ton)

Providing and fixing G.I. Rain water

spout of 50mm dia. and 30cm. length.

Constructing Brick masonry road gully

chamber 500mm x 450mm x 600mm

105 including 500mm x 450mm C.I. No. 2 1997.2

horizontal grating wih frame

complete.(upto 10 ton)

Constructing brick masonry road gully

chamber 1100mm x 775mm including

106 500mm x 450mm (C.I. horizontal grating No. 2 5077.8

with frame and vertical grating

complete.) (upto 10 ton)

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

(Double Wall) for non pressure

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 100mm

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

(Double Wall) for non pressure

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 150mm

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

(Double Wall) for non pressure

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 200mm

Providing & Supplying of Class SN8

structured wall Polythelene piping

systems (Pipe with online/offline

coupler and elastomeric sealing ring)

with non-smooth External Annular

corrugated and smooth internal surfaces

(Double Wall) for non pressure

underground Sewerage & Drainage

application as per EN:13476-3 incuding

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc. complete

(ID Dia). Pipe Dia. ID 250mm

Providing and laying Cement concrete

1:5:10 (1-Cement : 5-Fine sand :10-

Graded stone aggregate 40mm nominal

111 size) bedding for stoneware pipes of Rmt 100 211.59

following internal diameters with

necessary formwork and curing

complete.(B) 150mm dia. (166mm Ave.

TOILET FIXTURES

Providing and fixing wash down water

closet (European type, W.C. Pan) with

integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for separately)

(A) vitreous China Pattern :(i) in white

Providing and fixing 12.5 Litres low

level flushing cistern with a pair, of C.I.

or Mild brackets, complete with fittings

such as lead valve less syphon, 15mm

nom.nal size brass ball valve with

polythene float, C.P brass handle unions

and couplings for connections, with inlet,

outlet and overflow pipes, 40mm dia.

porcelain enamelled flush bend including

cutting holes in walls and making good

the same connecting the flush bend with

cistern and closet (overflow pipe to be

measured and paid for separately)(A)

Vitreous China (I) In white colour

Providing and fixing plastic seat and

cover for wash down water closer with

C.P. brass hinges and rubber buffers. (B)

Black plastic seal and cover.

Providing and fixing washbasin with

single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting

115 holes and making good the same but Each 20 1400.2

excluding fittings.(A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Providing and fixing Kitchen sink with

brackets, painted white including cutting

walls and making good the same but Each 20 2257.7

fittings. (C) Vitreous China Sink.(i)

Providing and fixing C.P. brass waste for

washbasin or sink. (B) 40mm dia.

117 Providing and fixing M.I. fisher union Each 90 87.77

for washbasin or sink. (B) 40mm dia.

Providing and fixing 100mm sand cast

118 iron grating for gully, floor or Nahni Each 100 36.61

Providing and fixing 600mm x 450mm

bevelled edge mirrror of superior glass

mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden

pluge with C.P. brass screws and

Providing and fixing 600mm x 120mm

glass shelf with C.P. brass bracket and

guard rail complete mixed to wooden

plug with C.P. brass screws.

Providing and fixing toilet paper

holder.(A) C.P. Brass

Providing and fixing screw down bib

taps of following size.(B) Brass

chromium plated screws down Bib Tap.

Providing and fixing pillar tap, capstan

head, screw down high pressure with

screws, shanks and back nuts. (i) 15mm

Providing and fixing chromium plated

brass half trun flush cock of approved

quality including fixing in pipe line etc.

complete.(i) 20mm dia.

Providing and fixing chromium plated

brass half trun flush cock of approved

quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

Providing and fixing Urinal or approved

quality including conecting the Urinal

126 with waste pipe , tap etc. complete.(A) Each 9 1026

White earthenware flat back or corner

type size 430mm x 260mm x 350mm.

Providing and fixing Rubber plug for

sink or wash basin.

Providing and fixing chromium plated,

128 bottle trap with necessary couplings of Each 11 292.87

approved quality for wash basin.

Providing and fixing ball cock of

129 approved. quality as directed.(A) Copper Each 25 187.96

Metal (ii) 50mm dia.

Providing and fixing Angle Cock with

screw, back nuts all necessary fittings

(Cera-CM108/ Parryware-T9939A1 /

Hindware-F100043)

Providing and fixing water closet

squatting Pan (Indian type W.C. Pan) size

580mm (Earthwork, bed concrete, foot

reste and trap to be measured and paid

for separately) (A) Vitreous China. (1)

Long pattern = White colour

Providing and fixing 12mm dia. Health

faucet with 8 mm dia of JAQUAR /

HINDWARE/ CERA or approved make

132 selected by Architect with flexible pipe Each 10 1200

of 1mt. length and holding stands

complete. Model Equivalant to Jaquar-

S.I.T.C. of single phase submersible pump

set suitable for 100 mm size or more dia

133 bore well having motor capacity and

discharge as under with necessary panel

box. Lifting and Lowering taken extra.

(c) Motor rating 2 HP (17 stage) pump

having capacity of 106 LPM at 40 mtr

head suitable for 32 mm dia. delivery

Providing and erecting ISI marked PVC

insulated PVC Sheathed Flat flexible

134 Submersible copper cable approved Mtr 50 145

make of following Size. (C) 3 Core x 4 Sq.

Supplying & erecting ISI Marked

(Embossed) following size of “C” Class G.I

135 . Pipe & erecting as directed by Mtr 50 210

Engineer-in-charge with necessary

plumbing as desired. (C) 40 mm dia

Supplying and erecting with leak proof

materials, M.S. Heavy duty ISI marked

coupling having threads of 8 TPI/11 TPI

136 suitable for ‘C’ class pipe to take load of Ea. 4 71

pump and pipe assembly of following

size andTPI :- (A) 40mm( 1.5") dia. pipe

Supplying & erecting G.l. bend for pipe

connections suitable for (C) 40 mm (1.5")

Supplying & erecting ISI Marked G.l.

138 Elbow for pipe connections suitable for Ea. 2 89

Supplying and erecting Direct On-line

Electronics Starter with 2-5/4-10/8-

14/10-16 Amp. Rating relay (variable

current setting) directly operated in

totally insulated elegant enclosure and

18 Amp. Rating power relay with start -

stop button for single phase operation up

to 3 HP as per complete erected on P.W.

Block with following features.

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv &

overload tripping. [Cat.II]

Supplying & erecting approved make

Automatic liquid level controller 6A. with

sensor testing as per instruction of

140 Engineer in charge on site complete with Ea. 1 2332

wiring connection with existing wires

with copper conductor from pump to

upper and lower tank.

Point wiring for Light / Bell with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires,

in following type of pipe to be erected

concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch /

bell push & accessories and earth

141 continuity of following type, erected on Pt 110 445

PVC / Metallic box, single mounting base

frame covered with textured/metallic

front plate modules erected on / in wall

/ ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and

accessories CAT III

Point wiring for secondary light point

with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated

142 multistrand copper wires, in following Pt 60 131

type of pipe to be erected concealed in /

flushed on wall/ceiling, complete with

earth continuity and necessary

connection with primary light with

accessories erected on Metal / PVC box

covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet for

open / concealed wiring. with necessary

Lamp holder / ceiling rose /

H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and

Point wiring for Two Way Controlled

Light Point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are

of .ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in / flushed on wall/ceiling

143 ,complete with 6A Modular type switches Pt 10 562

and following type of accessories erected

on PVC / Metallic box, single mounting

base frame covered with textured /

metallic front plate modules erected on /

in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling

rose or H.D.Connector as directed CATIII

Point wiring for FAN with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are

of .ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in / flushed on wall/ceiling

complete with 6A Modular type switch

and hum free EME four or more step type

electronic fan regulator with separately

mounted and accessories with earth

continuity of following type erected on

PVC / Metallic box, single mounting base

frame covered with textured/metallic

front plate modules erected on / in wall /

ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid

PVC pipe and accessories.CAT III

Providing following type of Modular

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

charge. (23)USB Charger with output of

V DC,2.1 A with inbuilt surge protection.

Point wiring for Looped Plug with 6A

Modular type switch & 5 pin socket

erected on PVC / Metallic box, single

146 mounting base frame covered with Nos 280 255

textured / metallic front plate modules

erected on / in wall / ceiling with

following type accessories. CAT III

Point wiring for Individual Plug with &

earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in

following type of to be erected concealed

in / on surface of wall / ceiling complete

with Modular type switch & 5 pin Plug

147 erected on PVC / Metallic box covered Pt 280 471

with appropriate front plate modules

erected on / in wall / ceiling as per pipe

erected with following type of

accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board CAT

Point wiring for Individual Plug with &

earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in

following type of to be erected concealed

in / on surface of wall / ceiling complete

with Modular type switch & 5 pin Plug

148 erected on PVC / Metallic box covered Pt 45 704

with appropriate front plate modules

erected on / in wall / ceiling as per pipe

erected with following type of

accessories.[III] For 16A Plug with 2-2.5

sq.mm Cu. Wire [II] For 16A Plug and

amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board..CAT-III

Providing & erecting Switch board for

Computer or electric apparatus

consisting of following items in single

board erected on PVC / Metal board

with 3 mm thick PC (Polycarbonate) /

Acrylic sheet erected as directed for [B]

modular type accessories

1 no. 6A/16A universal plug-switch

combined. CATIII

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

MAINS WIRING AND CONDUIT

Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper

conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity

of following size (a) with medium class

Rigid PVC pipe and accessories (a) 2 wire

Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper

conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity

of following size (a) with medium class

Rigid PVC pipe and accessories (B)

wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper

conductor wire in following type of pipe

to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour

for earth continuity of following size. (a)

with medium class Rigid PVC pipe and

(A) 2 wire 4 sq. mm

FANS & EXHAUST FAN ACCESSORIES

Supplying and erecting approved make

double ball bearing oscillating type

Heavy duty bracket fan with Aluminium

Blades A.C. 23OV. 50cy/s wall mounted

with height adjustment and rotary tilting

device complete with guard, wall

bracket,mounting accessories as

Supply, Installation, Testing and

Commissioning of suitable sweep, BEE

Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust

free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing

provision, copper winding, Power factor

not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum

215 CMM, 350 RPM,230v (tolerance as

remote unit for Speed Control and all

remaining accessories including safety

pin, nut bolts, washers, temperature rise

= 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with

surge, over current and overload

protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as

required.[ Make shall be approved by

Engineer in Charge] (B) 1200 mm Sweep

Providing 2.5mm.thick laminated acrylic

sheet to cover the fan hook or Fan box.

Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe

156 down rod erected duly painted for fan Mtr 15 107

complete with necessary 24/ O.20, 3 core

flexible wire with earthing.

Supplying & erecting fan hook box of

mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and

157 pierced through a 16 Gauge M.S. box / Nos 15 107

Heavy Duty PVC box complete erected

concealed in Ceiling with necessary

Supplying & erecting approved make low

noise decorative exhaust fan having

158 square frame ABS body with inbuilt Nos 18 1687

lowers & square frame.. 200mm with

LIGHTING FIXTURES :

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.). (A) Tube Light with

integral driver. (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet. Cat-lll

(i) 5-10 Watts, Surge-2 KV, IP-20,

conventional 1 to 2 feet

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.). (ii) 11-15 watts,

Surge-2 KV. Cat-lll

Supplying and erecting led lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours

life, 500 V in built-surge

161 protection,Polycarbonate diffuser, Ea. 5 187

mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5. (A) LED Lamps

integral type, with PC diffuser suitable

(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with

provision for spring loaded mounting

clips complete.IP20 (iii) 10 to 15 watts.

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name

162 160V to 270V,Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with

provision for spring loaded mounting

clips complete.IP20

(F) Spot Light 425 Lumens, Surge-2KV

(ii) 8 to 11 Watts Ea. 20 1354

(H) Mirror Light 9 Watts, wall mounted

minimum 1 feet long

(a) LED Bollard fittings of minimum

height 400 mm & dia.100mm having

polycarbonate clear/milky diffuser

mounted on 3mm thick aluminium

finished powder coated pipe with base

plate 160x160mm with erection by

M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt ,surge-

Supplying and erecting LED street light /

Flood light fittings with High power

White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and

heat sink extruded aluminium with

diffuser and Polycarbonate optics/

lenses, with toughened glass with

company mark/name engraved or

embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.). (B) Flood Light (IP-

65), Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection. (iv) above

90 to 120 watts. Cat-lll

DISTRIBUTION BOXES

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

165 rail, confirming to IS 13032 and BS 5486- Each 16 1141

1986 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of

same company of MCB to be used)

(F) Single phase 8 way SS Double door

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

166 rail, Conforms to IS 8623-1 & 3, IEC Each 5 1478

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of MCB

to be used) suitable for. (A) single phase

incoming and horizontal single phase

outgoing. (iv)Single phase 12 way SS

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

167 rail, confirming to IS 13032 and BS 5486- Ea 5 2885

1986 without MCB to house appropriate

nos. of MCBs N) Three phase 6 way SS

Double door for horizontal single phase

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

168 rail, confirming to IS 13032 and BS 5486- Ea 5 3379

1986 without MCB to house appropriate

nos. of MCBs N) Three phase 8 way SS

Double door for horizontal single phase

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

169 rail, confirming to IS 13032 and BS 5486- Ea 2 4620

1986 without MCB to house appropriate

nos. of MCBs N) Three phase 16 way SS

Double door for horizontal single phase

MINIATURE CIRCUIT BREAKER

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and

having breaking capacity 10 KA to be

erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double

pole switch for lighting Load (B Curve)

having 10 KA breaking capacity &

confirms to IS : 8828 in existing box

having following capacity (B) 40 Amp.

Providing & erecting 240 V MCB double

pole switch for motor & inductive load

(C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in

existing box having following capacity

(A) 6 to 32 Amp.

Providing & erecting 240 V MCB double

pole switch for motor & inductive load

(C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in

existing box having following capacity

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity (a) 6 to

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity (b)40 Amp.

Providing & erecting 415V MCB Four

Pole Switch for Lighting Load (B

curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity (b)40 Amp.

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity

C) 63 Amp. CAT-III

Approved make ELCBs / RCCBs

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable

for operation on single phase 240 V.

178 having characteristic of quick action & Ea 45 1950

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps.DP Cat.

Approved make ELCBs / RCCBs

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable

for operation on single phase 240 V.

179 having characteristic of quick action & Ea 25 2213

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 40 Amps.DP Cat.

Approved make ELCBs / RCCBs

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable

for operation on single phase 240 V.

180 having characteristic of quick action & Ea 5 2628

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 63 Amps.DP Cat.

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be

181 laid on wall with necessary clamps or in Mtr 100 282

existing trench / pipe of following size of

cables C) 3 1/2 core 50 Sq. mm (

Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be

182 laid on wall with necessary clamps or in Mtr 400 218

existing trench / pipe of following size of

cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq.

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of

following size of cables.

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of

following size of cables.

A)4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to

185 be laid on wall with necessary clamps or Mtr 100 359

in existing trench / pipe at road

crossing or floor of following size of

cables. (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid

186 on wall with necessary clamps or in Mtr 700 670

existing trench / pipe at road crossing

or floor of following size of cables. (A)

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to

187 be laid on wall with necessary clamps or MTR 400 505

in existing trench / pipe at road

crossing or floor of following size of

cables. (C) 4 core 6 Sq. mm

Providing and, fixing heavy duty flange

type brass double compression type

cable gland with rubber ring for PVC

188 insulated armoured cable complete with EA 20 189

out going tails, insulating tape etc for

following size of cables.(F) 3 & 1/2 core

Providing and, fixing heavy duty flange

type brass double compression type

cable gland with rubber ring for PVC

189 insulated armoured cable complete with EA 20 75

out going tails, insulating tape etc for

following size of cables. (B) 3 & 1/2 core

Providing and fixing heavy duty flange

type brass cable gland with rubber ring

for PVC insulated armoured cable

complete with out going tails, insulating

tape etc for following size of cables.

E) 2 to 4 core 25 Sq. mm

Providing and fixing heavy duty flange

type brass cable gland with rubber ring

for PVC insulated armoured cable

complete with out going tails, insulating

tape etc for following size of cables.

D) 2 to 4 core 16 Sq. mm

Providing and fixing heavy duty flange

type brass cable gland with rubber ring

for PVC insulated armoured cable

complete with out going tails, insulating

tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

Providing and fixing heavy duty flange

type brass cable gland with rubber ring

for PVC insulated armoured cable

complete with out going tails, insulating

tape etc for following size of cables.

C) 2 to 4 core 10 Sq. mm

Solder less crimping type Aluminium

lugs conforming to IS suitable for cable of

following size evenly crimped with high

194 pressure tool & connected to switchgear Ea 14 61

terminals with brass/cadmium plated

nut bolts in an approved manner. (H)

Solder less crimping type Aluminium

lugs conforming to IS suitable for cable of

following size evenly crimped with high

195 pressure tool & connected to switchgear Ea 30 20

terminals with brass/cadmium plated

nut bolts in an approved manner. (D)

Solderless crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

196 pressure tool & connected to switchgear Ea 40 15

terminals with brass/cadmium plated

nut bolts in an approved manner.

Solderless crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

197 pressure tool & connected to switchgear Ea 80 13

terminals with brass/cadmium plated

nut bolts in an approved manner.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

198 pressure tool & connected to switchgear Ea 1000 8

terminals with brass/cadmium plated

nut bolts in an approved manner. (A)

Providing and erecting Annealed bare

Copper wire 8 to 16 SWG.

Providing and erecting HOT deep

Galvanised iron strip wire 8 to 16 SWG.

Providing and erecting required size

HOT deep Galvanised iron strip for

201 earthing of H.T. , OCB/ ACB/ KG 200 77

Transformer LT panel board, Motors etc.

using proper clamp.

Providing and erecting required size

Copper strip for earthing of H.T. OCB /

ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

Supplying & erecting in earthpit of

minimum bore dia. 225mm size

approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm

203 having 200-250 Micron galvanising,

connection terminal dia of 14 mm with

constant ohmic value surrounded by

highly conductive compound with high

charge dissipation suitable for following

type of applications with chamber and

heavy duty cover.(approved make OEM

has to submit test certificate including

value of earth resistane of installation.

[B] For Electrical installation up to 11 KV

located in other than normal soil i.e.

Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of

(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer Ea 5 10489

System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of

SITC of 14.2 mm dia 3 mtr long Earth

electrode of High tensile steel electrode

with 250 micron copper bonding & 1 bag

of Carbon fill Based environment friendly

backfill tested as per IEC 62561-7 in

NABL accredited Laboratory and suitable

stainless Steel double sided clamp. Eco

Friendly rust proof heavy duty weather

proof Polyethylene Earth Pit Chamber

with following dimensions :254 mm dia

(top), 330 mm dia (bottom) & 260 mm

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or

ceiling erected with necessary PVC

205 fittings & Junction boxes fixed with Mtr. 1500 32

adhesive solution & Clamps with

following dia of pipes, in approved

manner as directed

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or

ceiling erected with necessary PVC

206 fittings & Junction boxes fixed with Mtr. 70 54

adhesive solution & Clamps with

following dia of pipes, in approved

manner as directed

Providing & erecting weather proof, dust

& vermin proof, floor mounted front

operated indoor type cubical panel

board necessary IP-42 and above

protection as per approval from

engineer incharge made from 14 SWG

207 thick CRC M.S. sheet for outer body & Sq.Mtr 7 19196

doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary

accesories , supporting angles/ flats

channel including cutting, bending,

drilling, welding, riveting with internal

partitions & cable alley as per

requirements & instruction of engineer-

in-charge with erection of supplied

switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire /

copper-aluminium strips, rubber

grommets, rib, bakelite control

fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos.

of hinged doors, handles with locking

arrangement and rubber gasket,heavy

duty end terminal connection,danger

notice board,necessary

ventilation,earthing strip complete. The

Panel shall be painted with epoxy

powder coating. (The rates excludes the

cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension

shall be measured excluding base beams)

The panel shall be supplied with

following approved manufacturers with

following size.(B) The standard

companies switch gear shall be used and

only manufacturers at CPRI approved

factory. (ii) With 550 mm. Depth

Providing , erecting , fabricating the M.S.

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with

one coat of red oxide with erection on

site as per direction of engineer in charge

with necessary grouting, cementing,

plastering & finishing complete.

Supplying and erecting triple pole &

neutral 440V/ 500V panel mounting

Aluminium Busbars with four equal Nos.

of bus having current density not more

than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with

209 colour insulating tape for phase Rn.Mtr 10 1455

sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket

to each busbar,erected in existing cubical

panel with necessary connections. (C)

Suitable for 300 Amp. Capacity

(A) Suitable for 100 Amp. Capacity Rn.Mtr 10 654

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA.

and above at 415 V . having normal

current rating 250A. with variable

210 thermal & magnetic release suitable to Ea 1 20739

work on A.C.supply 50 c/s. with all

internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to

25 A to 100A. with Fixed thermal &

211 magnetic release suitable to work on A.C. Ea 1 6112

supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing. . ICS=100% of ICU only

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having normal current rating

125A. with Fixed thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S. housing.. .

ICS=100% of ICU only Cat III

Supplying and erecting led lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours

213 life, 500 V in built-surge

protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22

lamp holders, pf >=

(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder

(ii) 5 to 8 watts

Supplying & erecting following spare

214 parts for panel mounting Switch

Disconnector Fuse Units

Operational Handle Assembly Complete

Cable Terminal ( ‘Plain" Type)Set of Four

Supplying & erecting power contactor

216 ,AC3 duty for time switch complete

erected as per direction Cat III

(D) 4 pole 440V 40 Amp. Ea 2 2755

Supplying & erecting approved make

Digital time switch having lithium cell

years operative and operate battery

backup 1 channel day clock with

memory programme, suitable to operate

on 240V + 5%, 16A with, floating

contacts Minimum switching setup time

1 minimum & LCD display. Also

comprised permanent ON/OFF

switching. Programming switches &

housed in fire proof thermoplastic

enclosure & transparent cover erected as

required with necessary connection

erected as directed.

Providing and erecting Approved make

Earth fault Relay suitable to mount with

inter connection suitable to following

size of moulded case circuit breaker

having CT ratio & MCCB rating as

following along with shunt trip 220V AC.

with all internal connections & complete

erected in existing M.S.housing..

Providing & erecting Medium Voltage

Danger Notice Board sticker as per

language suggested by engineer incharge

of standard size as per IS-2551

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor

with heat resistant PVC insulated

220 conforms to IS 694, IEC - 227 erected in

existing pipe of following size

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size of

copper lugs, nuts and bolts if required.

(b) One wire 1.50 sq. mm Mtr. 25 17

(c) One wire 2.50 sq. mm Mtr. 25 27

providng and erecting Suitable set of CTS

for 100A Energy Meter

Supplying and erecting approved make

suitable panel indicator LED type lamp,

lens cover, complete erected with

necessary connections.

MR TOGGLE SWITCH Ea. 3 115

MR THERMOSTATE HEATER Ea. 3 100

Providing and erecting multifunctional

meter suitable for application of Power

monitoring and showing measurement

of following Voltage, Frequency,

Apparent energy, Apparent power,

Active and reactive energy, Active and

reactive power, Average voltage Vavg,

Peak demand power PM, QM, SM,

Demand power P, Q, S, Apparent power

S, S1, S2, S3, Unbalance current, Power

factor and displacement PF (signed, four

quadrant), Calculated neutral current,

223 Active, reactive, apparent energy (signed, Ea. 1 13984

four quadrant), Active power P, P1, P2,

P3, Voltage U21, U32, U13, V1, V2, V3,

Phase currents, Average current Iag,

Peak demand currents, Reactive power

Q, Q1, Q2, Q3, Demand current I1, I2, I3,

[Us] rated supply voltage 40...300 V AC

45...65 Hz, 40...300 V DC, Network

frequency 50 Hz, Type of network 3P,

Display type 7 segments LED, Display

colour Red, Messages display capacity

fields of 4 characters, Display digits

digit(s) - 14.2 mm in height

Supplying rubber matting of following

thickness as per IS:15652/IEC

(c)12mm S.Mtr 10 3051

STREET LIGHT AND EXTERNAL

Street Light Pole

Supply of approved make GRP / FRP Pole

having following specifications: GRP

Light Pole made by CNC filament winding

machine using thermoset resin

polyester/epoxy resin system) having

minimum 62% glass content. The pole

should be in one piece and tapered round

in shape, having smooth finish and

should be totally free from corrosion as

well as non conductive & shock proof

Pole should be provided with FRP

Anchor Base and it should be heavy duty,

or MS Material duly painted with Epoxy

paint. Pole should be flame retardant as

per IS 6746. Resin used shall be UV

resistance and pigmented. A highly

weather resistant polyurethane coating

shall be applied to the pole after applying

suitable primer system that ensures

proper adhesion of the paint. Minimum

coating thickness shall be 80 to

micron. Deflection of the pole shall not

exceed more than 10% of the length of

pole for the given load“? Pole should be

generally made as per the dimensional

data, performance criteria and some

interchangeability features of poles as

standard ANSI C 136.20 latest version or

ASTM D 4923/01 . The size of pole and

type of installation are as below

Supply of approved make FRP Pole

having following specifications: FRP

Light Pole made by CNC filament winding

machine using thermoset resin

polyester/epoxy resin system) having

minimum 62% glass content. The pole

should be in one piece and tapered round

in shape, having smooth finish and

should be totally free from corrosion as

well as non conductive & shock proof

Pole should be provided with FRP

Anchor Base and it should be heavy duty,

or MS Material duly painted with Epoxy

Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance

and pigmented. A highly weather

resistant polyurethane coating shall be

applied to the pole after applying

suitable primer system that ensures

proper adhesion of the paint. Minimum

coating thickness shall be 80 to

micron. Deflection of the pole shall not

exceed more than 10% of the length of

pole for the given load“ Pole should be

generally made as per the dimensional

data, performance criteria and some

interchangeability features of poles as

per standard ANSI C 136.20 latest

version or ASTM D 4923/01 including

cable termination box with necessary

accessories . The size of pole and type of

installation with foundation as per

manufacturer details and site

requirement are as below .

(1) Suitable for base plate mounting

single arm Bracket.

[H] Overall length of 6 Mtr. Average

Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ± 2mm

approx. approx. Weight of Pole 32 kg

approx. (Without Base) Anchor Base

(Size 300X300 & 18mm Th.)

(2) Suitable for base plate mounting

Double arm Bracket.

[C] Overall length of 6 Mtr. Average

Thickness: 8mm.

Top/ Bottom OD Dia A/F 114/174 mm ±

2mm approx. approx. Weight of Pole

kg approx. (Without Base) Anchor Base

(Size 300X300 & 18mm th.)

Providing 1:2:4 cement concrete

foundation & 70 % PCC from bottom

including excavation for the pole of size

45 x 45 x 100 cm. Deep in below ground

227 level with plinth of 45 cm x 45 cm (or 45 Ea. 35 801

cm dia x 45 cm) high upper ground level

with necessary curing and finishing in

approved manner.

( for 4 & 6 mtr pole)

Providing cement concrete.for

foundation or for concrete filling in 1:2:4

228 ratio with 20 to 25 mm stone metal duly Cu.Mtr 20 5077

plastered with necessary curing for pole

muffing or any other purpose.

Providing FRP/GRP arm bracket of

having 15˚ arm with 50 mm OD pipe *5

mm thk,1000mm long from pole centre

(A) Single arm bracket Ea. 30 1882

(B) Double arm bracket Ea. 5 2390

Supplying & erecting approved make IP

55 grade Company fabricated Timer

Panel of following capacity for switch

On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly

epoxy power painted inside and outside

with hinged doors and locking

arrangement consisting of suitable size

of 4 Pole MCB and 4 pole contactor (cat-

III)with analog time switch, auto manual

switch of same make and suitable input

and output Bakelite terminals and with

door earthing approved by Engineer in

Providing & laying approved make

Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS

II )with necessary connecting

accessories of same material at required

depth in existing trench for laying of

cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia Mtr. 1500 62

(B)63mm outer dia Mtr. 500 73

Providing & laying. R.C.C. Hume pipe for

cable to be laid 90 cm. below ground

across the road crossing or on floor with

necessary material in an approved

manner and making the ground as per

original.(C) 300 mm dia

Supplying and erecting LED street light /

Flood light fittings with High power

White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and

heat sink extruded aluminium with

diffuser and Polycarbonate optics/

lenses, with toughened glass with

company mark/name engraved or

embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.). (A) Street Light (IP-

65), Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection. (iii) Above

Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of

following size to be erected as directed.

(h) 2.50 Sq.mm 3 core round PVC

FOOD COMPOSITOR MACHINE

CONSIDER 500 KG/HR. CAPACITY

Providing and erecting Approved make

Four pole microprocessor base moulded

case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to

100A. with Fixed thermal & magnetic

235 release suitable to work on A.C. supply Ea. 1 6112

50 c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S. housing. -

(The Enclosures should be used of same

company of MCCBs to be used) -

ICS=100% of ICU only Cat III

LIASIONING WORK

FOR OBTAINING NOC

Power Liasoning Charges for obtaining

Previous N.O.C from Electrical Inspector Statutory

Tender authority for Power/Ele. Installation. Job 1 20000

Rate Liasoning Charges shall include

preparing required attested documents

& drawing for obtaining NOC/Test

Report on behalf of client.

Supplying, installation, testing and

commissioning of Electric driven Main

Fire Pump suitable for automatic

operation and consisting of following,

complete in all respects, as required :(a)

Horizontal type, multistage, centrifugal,

split casing pump of cast iron body &

bronze impeller with stainless steel shaft,

mechanical seal conforming to IS

(b) Suitable HP Squirrel cage induction

motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts,

236 3 phase 50 Hz, AC supply with IP 55 Set 1 401,738

protection for enclosure, horizontal foot

mounted type with Class-'F' insulation,

conforming to IS-325. © M.S. fabricated

Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(D) Suitable cement concrete foundation

duly plastered with anti vibration pads.

(Note: *The head of the pump is

selected in a manner so as to give a

minimum 3.5kgf/cm 2 pressure at the

highest/farthest point.)1600 LPM at

Supplying, installation, testing and

commissioning of diesel engine driven

main fire pump suitable for automatic

operation and consisting of following,

complete in all respects, as required :

(Diesel Driven Pump). Horizontal type,

multistage, centrifugal pump of cast of

iron body and bronze impeller with

stainless steel shaft, mechanical seal

conforming to IS 1520. Suitable HP,

RPM water cooled with radiator, diesel

engine conforming to relevant IS

237 standard complete with auto starting Set 1 634,141

mechanism, 12 /24 volts electric starting

equipment, diesel tank, exhaust pipe

extended upto 10 m outside pump house

duly insulated with 50 mm thick glass

wool with 1.0 mm thick aluminium sheet

cladding, residential silencer,

instruments and protection as per

standard specification, stop solenoid for

auto stop in the event of fault with audio

indications, painted with post office red

colour etc. as required. M.S fabricated,

common base plate, coupling, coupling

guard, foundation bolts etc. as required.

Suitable cement concrete foundation

duly plastered and with anti vibration

*The head of the pump is selected in a

manner so as to give a minimum

3.5kgf/cm 2 pressure at the

highest/farthest point.) 1600 LPM at

Supplying, installation, testing and

commissioning of electric driven

pressurisation pump suitable for

automatic operation and consisting of

following, complete in all respects, as

required : (Jockey Pump). Horizontal

type, multistage, centrifugal pump of cast

iron body and bronze impeller with

stainless steel shaft, mechanical seal

conforming to IS : 1520. Suitable HP

squirell cage induction motor TEFC type

suitable for operation on 415 volts,

phase 50 Hz AC supply with IP 55 class

of protection for enclosure, horizontal

foot mounted type with Class-'F'

insulation, conforming to IS :

325. M.S.fabricated Common base plate,

coupling, coupling guard, foundation

bolts etc. as required. Suitable cement

concrete foundation duly plastered and

with anti vibration pads. (Note: *The

head of the pump is selected in a

manner so as to give a minimum

3.5kgf/cm 2 pressure at the

highest/farthest point.)180 lpm at

Providing & Fixing of fire extinguishers

with necessary accessories, stand,

trolley, etc., ISI Marked portable fire

extinguisher, 4.5 kg CO2 type fire

extinguishers complete in all respect

including initial

fill and wall suspension brackets & shall

Providing & Fixing of fire extinguishers

with necessary accessories, stand,

trolley, etc., ISI marked Fire

240.0 Extinguisher, Dry Chemical powder type Each 12 3,000

capacity 6 kgs conforming to IS :

including first fill & wall suspension

Supplying and fixing single headed

internal hydrant valve with

instantaneous Gunmetal/Stainless Steel

coupling of 63 mm dia with cast iron

wheel ISI marked conforming to IS

(Type -A) with blank Gunmetal/Stainless

Steel cap and chain as required :Single

headed Stainless steel

Supplying & fixing 63 mm dia gun metal

short branch pipe with 20 mm nominal

internal diameter size nozzle conforming

242.0 to IS 903 suitable for instantaneous Nos 8 1,648

connection to interconnect hose pipe

coupling as required :Stainless Steel

Supplying and fixing first-aid Hose Reel

with MS construction spray painted in

post office red, conforming to IS

complete with the following as required.

20 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type -

2 as per IS: 12585. 20 mm nominal

internal dia gun metal globe valve &

nozzle. Drum and brackets for fixing the

equipmets on wall. Connections from

riser with 25 mm dia stop gun metal

valve & M.S. Pipe and socket.40 m

Providing and fixing of Non-percolating

flexible hose (RRL type-'A' with EPDM

Lined) ISI marked (IS:636) 63 mm dia x

15 M long x 2 nos., complete with

244.0 instantaneous type stainless steel 63 mm Set 8 4,434

dia. IS marked SS Male and Female

couplings (IS:903) bound and rivetted to

hose pipe with 1.5 mm

Providing and fixing fire hose cabinet to

house fire hydrant & hose, including all

accerrories fabricated from M.S. sheet

(16 Gauge) of fully welded construction

having front door with locking

arrangement, partially glazed with 4 mm

thick glass. Cabinet shall be powder

coated & painted with post office red

colour of size to house 15 mtr.x 2 No.

hoses & 1 no. branch pipe. 'Fire Hose box,

Size:- 750 x 600 x 250 mm Depth

Complete with Fabrication Stand and

Supplying and fixing Single headed

external yard hydrant valve with 1 No.

63 mm dia instantaneous FM

Gunmetal/Stainless Steel coupling and

cast iron wheel, ISI marked, conforming

to IS 5290 (type A) with blank

Gunmetal/Stainless Steel cap and chain

as required :Single headed Stainless steel

Supplying and fixing of fire brigade

connection of cast iron body with gun

metal male instantaneous inlet couplings

247.0 complete with cap and chain as reqd. for

suitable dia MS pipe connection

to IS 904 as required :

2 way-100 mm dia M.S. Pipe Set 1 6,590

4 way - 150 mm dia M.S. Pipe Set 1 13,822

Providing laying, testing &

commissioning of 'C' class heavy duty MS

Pipe conforming to IS 1239/3589 i/c

fittings like elbows, tees, flanges, tapers,

nuts bolts, gaskets etc. in ground

248.0 including welding, excavation &

providing cement concrete blocks as

supports, anticorrosive treatment with

coaltar/asphalt tape as per IS

refilling the trench etc. of following sizes

complete as required.

200 mm. dia (wall thickness = 6.3 mm) M 10 3,169

Providing, laying, testing &

commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS

including Welding, fittings like elbows,

tees, flanges, tapers, nuts bolts, gaskets

etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support

frame and painting with two or more

coats of synthetic enamel paint of

required shade complete as required :

25 mm dia M 750 471

32 mm dia M 90 527

40 mm dia M 60 651

50 mm dia M 90 787

65 mm dia M 75 1,004

80 mm dia M 60 1,122

Supplying, fixing, testing and

commissioning of butterfly valve of PN

1.6 rating with bronze/gunmetal seat

250.0 duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS

13095 of following

sizes as required :

65 mm dia Set 6 4,000

80mm dia Set 8 4,842

150 mm dia Set 6 8,699

Supplying and fixing orifice plate made

out of 6 mm thick stainless steel (Grade

304) with orifice of required size to be

251.0 fitted between flange & landing valve of Each 4 1,291

external and internal hydrants to reduce

pressure at the outlet to the level of

kg/cm2 complete as required.

Providing, installation, testing and

commissioning of non-return valve of

252.0 following sizes confirming to IS:

complete with rubber gasket, GI bolts,

nuts, washers etc.as required :

65mm dia Set 1 7,539

150mm dia Set 3 17,577

Providing, installation, testing and

commissioning of stainless steel Y-

253.0 strainer fabricated out of 1.6 mm thick

stainless steel, Grade 304, sheet with

mm dia holes with stainless steel flange.

65mm dia Each 1 4,573

150mm dia Each 2 10,659

Supply, installation, testing &

commissioning of Expansion Bellow.

150mm dia Each 2 2,400

65mm dia Each 1 1,800

Providing & fixing of pressure switch in

255.0 M.S. pipe line including connection etc. as Each 3 1,508

Providing, fixing, testing &

commissioning of 15mm dia quartzoid

bulb type sprinklers of rating

degree centigrade with required

accessories : Pendent Sprinkler

Providing & fixing flow switch in

257.0 following sizes M.S. pipe including

connection etc as required.

b 100mm dia Each 3 6,500

Charges for Liasoning with CFO and

getting all approvals and permissions &

NOC 's required for fire fighting at

various stages & after completion of the

project. (All official and receipted

payments would be submitted and Re-

imbursed) Taking approval /NOC form

Signature of contractor Additional City Engineer (NORTH ZONE)

Seal Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

MAHANAGAR SEVA SADAN - NORTH ZONE

Name of Projects :- Construction of Vegetable Market at T.P.No-123/C (Naroda) F.P.No.-

in Thakkarbapanagar Ward of North Zone of AMC (Reinvite)

FINANCIAL BID ( To Be Submitted Online Only )

Sr. No. Description Amount

1 Amount For Civil+ Plumbing+ Electric + FIRE FIGHTING Rs.

I/We am/are willing to carry out work at ______ % above / below (should be written in figures and words)

the estimated cost mentioned above.

Estimated cost put to tender : RS. Estimated cost put to tender : RS.

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer (NORTH ZONE )

Seal Ahmedabad Municipal Corporation