CLASSROOM INTERIOR WORKS

CURVILINEAR TABLE:(3850X500X750MM) Supplying and fixing in position of the Curvilinear Table of size 3850x500x750 MM which shall be made out of 25mm thick top BWP plywood both side laminated with 1.0 mm thick laminate of approved shade. All the edges shall be finished with Teak wood lipping duly polished to match the laminate shade. The verticals and front facing with 19 mm thick BWP plywood both sides laminated 1.0 mm thick laminate of approved shade and pattern. The Table should be supported with MS powder coated frame/channel, where ever required. The table should be as existing tables in other class rooms (Photo attached ) including all hardware like screws Nylon bushes, including provision of 7 No. switch & power sockets ( 6 Amps) with required wiring inside table, including cost of Pvc conduit pipes and accessories etc., for complete finished item of work all as directed by Engineer In Charge for G.F. Class Room No:-101,103,105,and107

CURVILINEARTABLE:(3350X500X750MM) Supplying and fixing in position of the Curvilinear Table of size 3350x500x750 MM which shall be made out of 25mm thick top BWP plywood both side laminated with 1.0 mm thick laminate of approved shade. All the edges shall be finished with Teak wood lipping duly polished to match the laminate shade. The verticals and front facing with 19 mm thick BWP plywood both sides laminated 1.0 mm thick laminate of approved shade and pattern. The Table should be supported with MS powder coated frame/channel, where ever required. The table should be as existing tables in other class rooms (Photo attached ) including all hardware like screws Nylon bushes, including provision of 6 No. switch & power sockets ( 6 Amps) with required wiring inside table, including cost of Pvc conduit pipes and accessories etc., for complete finished item of work all as directed by Engineer In Charge for F.F Class room no:201,203,205,207 and 209

ACOUSTIC WALL PANELLING Acoustical Fabrics panels Stretch fabric Supply, Providing, fixing and Installation of Acoustic Wall Panel made of Fiber board of 25mm thick finished with wrap-up fabric wrinkle free finish having NRC - 0.7 of approved shade, make and colour with Rockwool layer between wall and the panel. The Acoustic Wall Paneling shall be installed with necessary Channels, studs, Hardware system as per manufacturer specifications, as per approved shop drawings and as directed by Engineer-In-Charge and Acoustic Wall Panel shall be Moisture resistance, Fire Class 1 having Green Rating or Low VOC, Termite proof, complete for finished item of work complete as directed by Engineer-In-Charge Technical Parameters of fabric •Fire (Class) – 1 • Acoustics – NA • Thermal conductivity (W/mk)– NA • Climate (°C, RH) – 50, 90 • Light reflectance (%) – Colour Dependent • Green (VoC, RC %) – Low, 25 Technical Parameters of Panel/Strand • Fire (Class) – 1 & P • Acoustics – NRC 0.75 • Thermal conductivity (W/mk)– 0.07 • Climate (°C, RH) – 50, 95 • Light reflectance (%) – 80 • Green (VoC, RC %) – Low, 30 MAKE: ANUTONE / KNAUF DANOLINE / ARMSTRONG / CREDENCE / OR EQUIVALENT Class room No: 105

Purple Office Systems

Inspire Office Systems

TRAC FUJICO AIR SYSTEMS LLP

Lifestyle Interiors

GANTA KRISHNA REDDY

SRI SHAKTHI LAB SOLUTIONS

CREATIVE DESIGN & PRODUCTS