Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.2 CrAccepted-AOC | ₹18.2 Cr Quoted ₹18.8 Cr | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹22.8 CrRejected-Finance | ₹22.8 Cr | L2 | Rejected-Finance Other than lowest |
Tender Value
₹17.9 Cr
EMD Value
₹17.9 L
Closing Date
12 Oct 2020, 5:00 pmClosed
Executive Engineer Jal Shakti Division Mandi
Jal Shakti Division Mandi Tarna Hill
Laying Jointing and testing of DI Pipe in sewer network construction of RCC anchor block RCC man holes flushing tank providing house hold connections P Machinery RMain and PHouse etc Zone A B E Bhuli Chadyana Nela and River
2020_HPIPH_41147_1
9356-9415
Open Tender
Civil Works
365 days
Mandi
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,500
Yes
EE Mandi
₹17.9 L
Yes
5 Feb 2021
26 Sept 2020
13 Oct 2020
26 Sept 2020
12 Oct 2020
26 Sept 2020
Amount
Cutting in earth work in all kinds of soil such as pick work,jumper work,blasting work,chiselling in hard/soft rocks where blasting is prohibited and disposal of excavated earth upto all leads and lifts complete as per the entire satisfaction of the Engineer-in-charge.
Excavation in foundation and trenches etc. in earth work lift upto 1.50 metre stacking the excavated soil not more than 3 metre clear from the edge of the excavation and then returing the stacked soil in 15 cm layer, when required in to plinth sides of foundations e tc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed in all leads and lifts of 20 metres complete in all respect.and to the entire satisfaction of the Engineer-in-Charge.
Providing and laying cement concrete 1:6:12( 1cement:6 sand: 12 crushed stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.
Providing and laying cement concrete 1:5:10 (1 cement:5 sand: 10 graded stone aggregate 40mm nominal size ) with 15 % plum and curing complete excluding cost of form work in retaining walls/ breast walls, the size of plums shall usually be 150 mm. to 300 mm. as per H.P.P.W.D specifications in all leads and lifts.
Providing and laying cement concrete 1:4:8(1cement:4 sand:8 crushed stone agg. 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.
Providing and laying cement concrete 1:3:6(1cement:3 sand:6 crushed stone agg. 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.
Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads & lifts.
Providing and laying cement concrete 1:1.5:3(1cement:1.5 sand:3 crushed stone agg.20mm nominal size )& curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:
In foundation and plinth in all leads and lifts.
Walls ( any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level in all leads and lifts
Foundation footing bases of columns atc. and mass concrete in all leads and lifts.
Columns, pillars , posts and struts:- Square, rectangular or polygonal in plain in all leads and lifts.
Beams, centilivers, girdersand lintels sides and soffites of beams up to floor two level in all leads & lifts.
Suspended floors,roofs,landing and shelves and their support balconies,beams,girders,bressumers,and cantilvers upto floor two level in all leads and lifts.
Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:-
Flat surfaces such as soffits of suspended floors,roofs,landing and the like floors etc.200mm thickness in all leads and lifts.
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster,buttresses, plinth and string courses and the like in all leads and lifts.
Foundation footing bases of columns atc. and mass concrete in all leads and lifts.
Columns, pillars , posts and struts:- Square, rectangular or polygonal in plain in all leads and lifts.
Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth in all leads and lifts.
Edges of slab and breaks in floors and walls under 20 cm wide in all leads and lifts.
Stair cases with slopping or stepped soffits including riser and stringers including landing in all leads and lifts.
Providing and laying cement concrete 1:2:4(1cement:2 sand:4 graded stone agg.20mm nominal size)and curing complete excluding cost of form work and reinforcement and reinforced concrete workin:-
Suspended floors,roofs,landing and shelves and their support balconies,beams,girders,bressumers,and cantilvers upto floor two level in all leads and lifts.
Providing tor steel reinforcement for RCC work including bending,binding and placing in position compete upto floor two level in all leads and lifts.
Providing and Fixing of Precast concrete manhole cover & frame conforming to IS-12593-1988, part-I and IS 12592-1991, part-II, 500mm diametre medium duty in all leads and lifts.
Providing and fixing Steel fibre reinforcement concrete(SFRC)manhole cover and frame conforming to IS-12593(Part-I)1988 and IS 12592-1991 Part-II with latest ammendments 560mmdia (Medium duty)in all leads and lifts.
Testing of Manholes in all respect in allleads and lifts.
Laying, jointing and testing in trenches Centrifugally cast (Spun) ductile iron pipes conforming to BIS-8329-2000 ( latest with up to date ammendments) in length of 5.50 mtr.class K7 with cement mortar lining in side duly ISI marked including cost of Tyton(Push or joints)fittings including testing of joints and rubber gasket(S&R quality)conforming to IS-92820-1989 (Earth work in trenches to be measured and paid for separately) in all leads and lifts.
600 mm dia
450 mm dia
400 mm dia
300 mm dia
250 mm dia
200 mm dia
150 mm dia
Providing,Laying, jointing and testing in trenches Centrifugally cast (Spun) ductile iron pipes conforming to BIS-8329-2000 ( latest with up to date ammendments) in length of 5.00 mtr.class K9 with cement mortar lining in side duly ISI marked including cost of Tyton(Push or joints)fittings including testing of joints and rubber gasket(S&R quality)conforming to IS-92820-1989 (Earth work in trenches to be measured and paid for separately) in all leads and lifts.
150 mm dia
200 mm dia
250 mm dia
Dismentalling of old CI pipe line (earth work to be measured and paid for separately) in all leads and lifts.
600 mm dia
450 mm dia
250 mm dia
Providing and laying DI bends class K9 jointed with SDR Tyton Push on joint in all leads and lifts.
150mm dia
200mm dia
250mm dia
Providing and laying DI Y connection class K7 jointed with S.B.R. Tyton Push on joint of 150 mm dia.in all leads and lifts.
Providing and laying DI Plug class K7 jointed with S.B.R. Tyton Push on joint of 150 mm dia.in all leads and lifts.
Random rubble masonary/Polygonal rubble masonary (uncoursed or brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement:6sand:12crushed stone aggregate 20mm nominal size
Brick work using common burunt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:6 (1cement : 6 sand) Ist class bricks in all leads and lifts.
Half brick masonry in common butnt clay building bricks in cement mortar I :4 ( I cement 4 sand ) Ist. class bricks in all leads and lifts.
15mm thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two levels including arrises internal rounded angles chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
20mm thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two levels including arrises internal rounded angles chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
6mm cement plaster to ceiling in cement mortor 1:3.(1 Cement 3 Sand ) in all leads and lifts.
Providing 200 mm wide cast iron rungs with chequared or ribbed non slip surface including fixing in manhole with 200 x 200 x 100mm cement concrete 1:3:6 (1cement:3sand:6 crushed stone aggregate 20mm nominal size ) complete in all respect. In all leads and lifts.
Near Panchvakta Temple- Providing, Supply and errection of Non Clog submersible pump as per the Curve chart & site conditions. The pumping machinery include automatice control pannel, main MCB, Voltmeter, Amperemeter, Power capacitor, Control MCB, Supply & motor side cable/NRV/Sluice valve/Common Header Job/Earthing and the all other required accessories/ components requirement as per latest IS code (latest edition and CPHEEO manual).
Near Vishwakarma Temple- Providing, Supply and errection of Non Clog submersible pump as per the Curve chart & site conditions. The pumping machinery include automatice control pannel, main MCB, Voltmeter, Amperemeter, Power capacitor, Control MCB, Supply & motor side cable/NRV/Sluice valve/Common Header Job/Earthing and the all other required accessories/ components requirement as per latest IS code (latest edition and CPHEEO manual).
Bhiuli near Home guard office-Providing, Supply and errection of Non Clog submersible pump as per the Curve chart & site conditions. The pumping machinery include automatice control pannel, main MCB, Voltmeter, Amperemeter, Power capacitor, Control MCB, Supply & motor side cable/NRV/Sluice valve/Common Header Job/Earthing and the all other required accessories/ components requirement as per latest IS code (latest edition and CPHEEO manual).
River dale near patrol pump-Providing, Supply and errection of Non Clog submersible pump as per the Curve chart & site conditions. The pumping machinery include automatice control pannel, main MCB, Voltmeter, Amperemeter, Power capacitor, Control MCB, Supply & motor side cable/NRV/Sluice valve/Common Header Job/Earthing and the all other required accessories/ components requirement as per latest IS code (latest edition and CPHEEO manual).
Suketi khad(near old septic tank)- Providing, Supply and errection of Non Clog submersible pump as per the Curve chart & site conditions. The pumping machinery include automatice control pannel, main MCB, Voltmeter, Amperemeter, Power capacitor, Control MCB, Supply & motor side cable/NRV/Sluice valve/Common Header Job/Earthing and the all other required accessories/ components requirement as per latest IS code (latest edition and CPHEEO manual).
Indira Awas colony- Providing, Supply and errection of Non Clog submersible pump as per the Curve chart & site conditions. The pumping machinery include automatice control pannel, main MCB, Voltmeter, Amperemeter, Power capacitor, Control MCB, Supply & motor side cable/NRV/Sluice valve/Common Header Job/Earthing and the all other required accessories/ components requirement as per latest IS code (latest edition and CPHEEO manual).
Wiring for light point /Fan Point/exhaust fan point/call bell point with 1.50 Sqmm. PVC insulated copper conductor cable in surface/recessed PVC casing and caping as required. (Group B)
Circuit wiring in casing and capping 2 X 1.50 Sqmm wiring for circuit wiring with 2X1.5 sqmm PVC insulated PVC sheated copper conductor single core cable in surface/recessed PVC conduit as required.
Wiring for sub main wiring with 2 x 4.00 Sqmm. PVC sheated PVC insulated copper conductor single core cable in PVC Conduit as required.
(a) Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required.
(b) Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.
(a) Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required.
(b) Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.
Supplying and fixing of wooden box of following size (nominal ) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required.
Supplying and fixing ceiling rose on existing junction box/ wooden block including connections etc. as required.
Supplying and fixing plain pandent with 16/20 mm twin twisted, flexible PVC insulated copper cable and backelite pendant holder including connections, etc. as required.
Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat-B.9Single Pole)
Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar 4 way.
Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiring the down rod of standard length (upto 30 Cm with 1.5 Sqmm PVC insulated copper conductor signle core cable etc. as required.Ceiling fan 1400mm sweep category A
Providing, installing, testing and commissioning of prewired flourscent tube fittings complete with ballast starter and capcitors but excluding flourcent tube fitting tube rod suitable to operate on 230 Volts,single phase AC Supply directy on surface with copper wiring as required (2X40 Watt box type category B Bajaj/ Philips.)
Supplying and Fixing of tube rod AL- 40 Watt on the existing tube fixture complete in all respect.
Providing and fixing sodium vapour light 150 wt. complete with all accessories including cost of lamp ISI mark as per entire satisfaction of the Engineer-in-charge.
Providing and fixing two core service wire 6 Sqmm thick.
Providing and fixing vitreous china wash down water closet ( European type. W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :1 sand )( Seat and over to be measured and paid for separately :-
Providing and fixing 100 mm size P or S trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1 cement :1 sand) Vitreous china
Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, masquito proof lid, C.P. Brass unions and coupling for connections with inlet, out let and over flow pipes including cutting holes and making good the same ( over flow pipe tobe measured and paid for separately) 10 ltr capacity.
Providing and fixing vitrous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 550mm X 400 mm
Providing and fixing C.P. Brass S Trap for wash basin and sink. 32 mm
Providing and fixing 600mm X 450 mm beveelled edge mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers.
Providing and fixing PVC Pipe 100 mm dia complete.
Providing and Fixing GI unions complete in all respect.
Providing and Fixing GI elbow complete in all respect.
Providing and Fixing GI Tee complete in all respect.
Providing and Fixing GI sockets complete in all respect.
Providing and Fixing to wall ,ceilling and floor galvanised mild steel tube , fitting and clamps including making good the same ic.c. wall, ceiling and flooring 15mm
Providing and Fixing GI nipples complete in all respect.
Providing and Fixing PVC water storage tank complete in all respect.(500 Ltr. Each cap.)
Cement concrete flooring 1:2:4(1 cement:2 sand:4 graded stone agg.20mm nominal size)laid in one layer finished with a floating coat of neat cement 40mm thick in all leads and lifts.
Distempering with dry distemper of approved brand and manufacture (two coats)and of required shade on un-decorated wall surface to give an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth in all leads and lifts.
Providing wood work in frames of doors, windows and other frames fixed in position of 2nd class deodar wood/Malasian Saal wood in all leads and lifts.
Providing and Fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. (2nd class deodar wood)
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease ,dirt and other foreign matters,sand papering and knotting. Ready mixed primer paint brushing wood primer pink in all leads and lifts.
Painting two coats(excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matters sand papering and stopping with enamel paint other than white in all leads and lifts.
Wall painting two coat with Acrylicemulsion paint of approved brand and manufacturing on un decorated wall surfaces to give and even shade i/c throughly brushing the surfacs free from mortor dropping and other foreign matter in all leads and lifts.
Providing and fixing Aluminium sliding door bolts with bolts and nuts screws etc.complete 250 x 16 mm in all leads and lifts.
prpoviding and fixing Aluminium Tower bolts (barel type) with screws etc complete in leads and lifts
prpoviding and fixing Aluminium Handles with necessary screws etc complete in leads and lifts
Providing 40 * 3 mm iron hold fast 40 cm long including fixing to frame with 10 cm dia bolts, nuts and wooden plugs and embending in c.c. block 30*10*15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size in all leads and lifts.
Manufacturing supplying and fixing of 1000 liters capacity having size 1.00X1.00X 1.00 Meters MS flushing tank making with MS sheet 3.15 mm thick cost including inlet and out let flanged pipes with sluice valve and flushing pipe, The cost of tank should be include all cutting, welding, carriage and assembling etc. complete with the entire satisfaction of Engineer-In Charge in all leads and lifts.
Providing and Fixing sand cast Iron/ Cast Iron spun spigot and stacked soil waste and ventilating pipe (lead caulked joint to be measured & paid for seprately) in all leads and lifts 100 mm dia.
Providing inspection vehicle (Scor Pio S 11)
Supply of CPCB II silent DG set comprising of M & M make coupled to 10 KVA crompton Greaves make 3 phase with AMF 415 V, 50 Hz alternator mounted on a common base frame along with other accessories i. e. fule tank, battery with leads and acoustic enclosure in all leads and lifts.
PunchVaktra Temple (10.00 KVA)
Indira Awas (20.00 KVA)
Sauli Khad (62.50 KVA)
Vishwa Karma Temple (82.50 KVA)
Bhiuly (30.00 KVA)
River dale colony (20.00 KVA)
Steel work welded in built up sections,trusses and framed work ,including cutting,hoisting ,fixing in position and applying a priming coat of red lead paint:- In gratings framed guard bars, ladders, railing, brackets and similar works in all leads and lifts.
In gratings framed guard bars, ladders, railing, brackets and similar works in all leads and lifts.
Providing and laying cement concrete 1:2:4 (1 cement:2 sand: 4 graded stone aggregate 20mm nominal size ) curing complete excluding cost of form work in complete in all respect
Walls ( any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level in all leads and lifts
Boulder filling behind the retaining wall in all leads and lifts.
Providing and fixing Cast Iron Sluice Valve of BIR/KARTAR/PELICON make BIS No. 14846 with flange Table-5 including cutting of GI pipe, welding of flanges, Nuts & Bolts and Gasket etc. The sluice valve conforming to IS-780. The diameter of sluice valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge . in all leads and lifts.300 mm Dia
CIVIL TECH CONSULTANT
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid