Repair to sanitary fittings CP fittings tilling plastering GI fittings and other misc BR works at OMQ Mini DJ area and other OTMaccn under AGE BR II at GE AF No 2 Jodhpur

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.

Taking down shutters of any description exc 1 sqm & n exc 2 sqm each and refixing in Same opening after doing suitable repairing hinges etc or as directed by Engr-In-charge

Taking down chowkats or frame with shutter (without taking off shutters from the frames) n exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4.00 sqm each of any description incl making good the disturbed surfaces complete all as spd and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd and as directed.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed.

M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6.

All as per item No. 8.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M & L for 75mm thick Plain Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) complete all as specified and directed by EIC.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, set and jointed in CM (1:4) with grey cement and With pigment complete all as specified and as directed.

M&L for Pre-cast cement concrete factory made kerb stone with 1:3:6 type C1 (20mm graded Stone aggragate) solid blocks, exc. 10 cm in width and setting in mortar,CM 1:6 complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings any type complete all as specified and as directed.

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc.

Excavating in post holes (or similar holes ) each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm for hard /dense soil

M&L for cement concrete type D2 1:3:6 (40 mm graded aggregate) in foundation filling and mass concrete .

M&L for steel work in tubular posts , trusses, purlin rafters including special shaped washer etc or induction butt welded tubes complete all as specified and as directed.

S&F pre-painted galvalumne aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall fixed with self screws as specified

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described priming with red oxide and applying two coats of synthetic enamel paint as directed by Engineer-in-Charge

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and complete all as specified and directed by Engr-in-Charge

S&F for Anodised aluminium snap grid frame work for false ceiling size of grid 605x605 mm and complete all as specified and directed by Engr-in-Charge

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws & fixed in ceiling flat or slopin and complete all as specified and directed by Engr-in-Charge

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and complete all as specified and directed by Engr-in-Charge

S&F vanishing Vertical Blinds made of glass fibre fabrics in width 5” (or 4”). Minimum overlapping of ¾” in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. End control box composed of double gear system. Stainless steel spacers. Botton weight fully plastic covered linked with plastic bead chain and complete all as specified and directed by Engr-in-Charge

Fixing only in repairs Aluminium/stainless steel curatin rod , having outer dia 28 mm including stainless steel fixing brackets all as directed by Engineer-in-Charge.

Fixing only in repairs Stainless Steel cap for curtain rod for 28mm dia curtain rod as directed by Engineer-in-Charge.

M&L Providing Stone Jallies jodhpur type 48-50 mm thick and 60 cm high fixed in line incl stone pillar having size 100x100MM in CM 1:4 fixed on Stone runner beam (stone pillar measured with Jalli).

M&L Providing bottom runner stone beam (jodhpur type) fixed in line incl excavations having size 100x150 MM in CM 1:4 & make ready for fixing of jodhpur stone jalii & Pillar.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, type C-1, 1:3:6 (20mm graded aggregate) complete all as specified and as directed.

M& L for 10mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.

M&L for rendering 15mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper, white or tinted, over a coat of chalk whiting all as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of wheather proof exterior emulsion paint complete all as specified and all as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash.

M&L for Complete removal of old existing surfaces of walls and applying two coats of wheather proof exterior emulsion paint complete all as specified and all as directed

S&F power coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F sheet glass 5.5 mm thick, tinted quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

S& F for 4 to 5mm thick ACP sheet fixed with rubber beading in aluminium frame works complete all as specified and directed by Engr-in-Charge.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm complete all as specified and directed by EIC..

S&F Aluminium anodised barrel tower bolt of extruded section 200mm size complete all as specified and directed by EIC.

S&F Butt hinges,heavy weight cold rolled stainless steel of size 100mm complete all as specified and directed by EIC..

S&F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and complete all as specified and directed by EIC.

S&F aliminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as directed by Engineer-in-Charge.

S&F aliminium Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed as directed by Engineer-in-Charge.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm.

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F in repairs for center hole basin mixer without popup waste system and complete all as directed by Engr-in-charge

S&F in repairs for sink mixer with regular spout w/m and complete all as directed by Engr-in-charge

S&F in repairs for wall mixer with bend, and complete all as directed by Engr-in-charge

S&F in repairs 15 mm bore brass chromium plated two way bib cock two in one with angle cock including fixing to steel pipe or union and complete all as directed by Engr-in-charge.

S&F in repairs brass chromium plated health faucet of 15 mm bore and complete all as directed by Engr-in-charge

S&F in repair Brass chromium plated shower rose 125mm size with arm and complete all as directed by Engr-in-charge

Taking up or down 15mm steel tubing and connection and complete all as directed by Engr-in-charge

Taking up or down 20mm steel tubing and connection and complete all as directed by Engr-in-charge

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia and complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 75mm dia with access door and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 110 mm dia with acess door and complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC WC connector with lip ring complete all as specified and directed by Engr-in-Charge.

S&F MS powder coated louvers with including arrangement of fixing glass pinhead as per sizem& louvers ventilator (Glass shall be measurement separately) complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and all as directed.

M&L for PCC type D-2, 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc and complete all as specified and all as directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing etc and complete all as specified and all as directed.

GANGADHAN ENTERPRISES (BID ID -3062096)

M/S BUDHRAM BISHNOI (BID ID -3069934)

BHAKAR RAM AND SONS (BID ID -3070804)

VIKAS CONSTRUCTION CO. (BID ID -3069450)