PROVIDING AND LAYING OFFTAKE LINE, CONSTRUCTION OF WATER DISTRIBUTION STATION WITH ELECTRO-MECHANICAL WORK, RISING MAIN, ESR INCLUDING O & M FOR 2 YEARS, WATER SUPPLY DISRIBUTION NETWORK IN TP-28 AND 29 PART-1 OF GMC AREA

Bill of Quantities and Rates

Providing and Laying offtake line, Construction of Water Distribution Station with Electro-

Mechanical Work, Rising main, ESR including O & M for 2 years, Water Supply Disribution

Network in TP-28 and 29 Part-1 of GMC area

Providing and laying offtake line from exist. CWTM to Prop. WDS in TP-28 and 29 Part-1 Scheme

Item Qty. Unit Rate in Rs. Amount in Rs.

01 Excavation for pipe line trenches distribution network, valve

chambers for all required gradient and line including safety

provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc. complete

for all lifts and strata as specified.

In all sort of soils and soft murrum

1.5 to 3 mt. Depth 5.00 m3 98.00

02 Providing and supplying DI K-9 grade pipe with EPDM gasket

for following nominal bore diameter with internal cement

mortar lining including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to site, stacking etc. complete. (IS 8329-2000).

450 mm dia. DI pipe (K-9) 100.00 Rmt 6,673.00

03 Lowering, laying and jointing DI Pipes of various classes with

specials of following diameters in proper position grade and

alignment as directed by Engineer in charge.

450 mm dia. DI pipe (K-9) 100.00 Rmt 265.00

04 D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron

flanged Socket Spigot Bends, tees,reducers or any other

specials as per BS-EN-545/1995 Class-A series K12 suitable

for use with D.I Pipes manufactured as per IS:8329/1994

delivery of specials to site of works any where in Gujarat

including fixing, all taxes, loading, unloading, carting,

stacking,insurance, inspection charges, octroi etc. complete.

Above 300 mm dia 266.00 Kg 151.00

05 Providing and laying cement concrete M20 for thrust block 54.00 m

and encasing including formwork but excluding the cost of

reinforcement with curing etc. complete, as directed.

06 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 2.00 MT 77,285.20

C. work including bending, binding and placing in position

complete upto floor two level.

07 Providing and laying cement concrete 1:2:4 (1 cement : 2 1.00 m

coarse Sand :4 Graded stone aggregate 20 mm nominal size)

and curing etc. complete excluding cost of form work.

Item Qty. Unit Rate in Rs. Amount in Rs.

08 Providing,supplying ,fixing ISI mark Ductile Iron D/F

manually gear operated SLUICE VALVE including taxes,

insurance, transportation, fright charges, Octroi Inspection,

charges, loading , unloading, conveyance to site stacking, etc.

complete valve with ISI mark only

PN 1.0 with hand wheel /cap operated (PD Type Short body)

09 Providing and supplying CI/DI Tamper proof /Bi Stream Air

valves with SS 304 Float gun metal nozzle of approved make

& quality of following class and diameter including all taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores,

stacking etc. complete.

With isolating sluice valve PN

10 Lowering, laying & jointing in position following air Valves

including cost of all labour, jointing material, including nut

bolts & giving satisfactory hydraulic testing, etc. complete.

With Isolating Sluice Valve PN

11 Refilling the pipeline trenches including ramming, watering, 205.00 m

consolidating disposal of surplus stuff as directed within a

radium of 3 Km.

12 Extra rate over item of excavation of earth for excavation of

asphalt pavement/RCC of thickness upto 0.30 meter including

demolishing the asphalt carpet, metal, soiling/cutting

Reinforcement etc. comp. with stacking the material as

up to 0.30 meter (By any type of Breaker Machine or R.C.C 88.00 Smt 200.00

Cutter machine including cost of operator, fuel &

transportation etc complete.

13 Reinstatement of Bituminous road including with 40 mm thick 88.00 Smt 1,945.00

Bituminous Concrete using 5.4 % Asphalt ,50 mm thick DBM

using 4.5 % Asphalt with tack coat using RS 1 emulsion @

2.5 Kg/Sqm , with Tack coat using RS 1 emulsion @

Kg/Sqm, Prime coat with SS 1 emulsion @ 7.5 kg/Sqm,250

mm thick WMM , 200 mm thick GSB V loosening and

recompacting ground as per respective MoRTH specification

and as directed by engineer in charge.

Item Qty. Unit Rate in Rs. Amount in Rs.

14 Construction of chambers in brick masonary, locally available

in C.M. 1 : 6, foundation concrete 150 mm thick in C.C. 1:4:8

of trap metal size 25 mm to 40 mm thick, inside cement plaster

in C.M. 1:3 and cement pointing outside in C. M. 1 :3 & top

cover of precast RCC slab 100 mm thick upto 1 mt. depth

from G.L. but excl. cost of excavation and refilling. With cast

in situ RCC slab in two piece with fixing FRC frame and

cover etc. complete(excluding cost of frame & cover ) with

mm thick brick masonary wall in C.M.1:6

(1) For Sluice Valve & Air Valve

a).1.3 x 1.3 mt. and 1.0 mt. deep chamber 2.00 No. 11,351.00

b) for 1 m. extra depth 2.00 Rmt. 6,084.00

15 Providing F.R.C. MH seat cover incl. carting to the work site 2.00 No. 2,380.00

etc. comp. Directed. F.R.C. Extra Heavy Duty (EHD-35)

machinehole Covers & Frames Cover: 728mmø & 100 mm

thick circular cover, 35.00MT load design,100 x 2mm MS flat

all round,16mm øplain round bar for lifting the cover & should

be fitted with plastic cups. Frame:560mm ø clear opening, -

888 x 888 x 175mm. On the upper periphery off rame 25x3

mm wide MS flat should be well embed in concrete to protect

the edges off rame. FRCE.H.D.-35 machinehole cover &

frame described as above.

16 Demolition and disposal of unserviceable materials with all

i) Unreinforcement Cement Concrete 50.00 m3 639.72

17 Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift

18 Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift

i) In Cement Mortar 50.00 m3 577.92

Construction of Water Distribution Station For TP-28 and TP-29 Part-I In GMC Area

01 'Excavation for foundation for loose and soft soil including

sorting out and stacking of useful materials and disposing of

the excavated stuff up to 50 meter lead.

02 Extra over item no. 1 above for lead from 50 m to 5 Kms. as 2303.00 m3 103.26

Item Qty. Unit Rate in Rs. Amount in Rs.

03 'Extra over item no. 1 above for lead from 5 Kms. to 10 Kms. 2303.00 m3 112.74

04 Filling with available excavated earth (excluding rock) in 2660.00 m3 136.92

trenches, plinth, sides of foundation in layers not exceeding

cm in depth consolidating each deposited layer by ramming

05 Providing and laying cement concrete 1:2:4 ( 1 cement : 190.00 m

2coarse Sand :4 Graded stone aggregate 20 mm nominal

size) and curing etc. complete including cost of form work in

Foundation and Plinth.

06 Providing and laying cement concrete 1:2:4 ( 1 cement : 2 90.00 m3 3,758.19

coarse Sand :4 Graded stone aggregate 20 mm nominal size)

and curing etc. complete excluding cost of form work in

Foundation & Plinth.

07 Providing and cast in situ C.C. in grade M-30 proportions of

ingredients as per mix design by weigh batching using granite,

quartzite trap metal of size 12 mm to 20 mm and or 6 mm to

12 mm including scaffolding centering formwork, needle

vibrated consolidation, curing and hydraulic testing etc.

complete (excluding cost of reinforcement) upto 6 meter

height / depth Av. G.L. for all water retaining structures.

Columns 410.00 m3 8,213.00

R.C.C. walls 300.00 m

R.C.C. staircase 10.00 m

Columns 190.00 m3 9,317.00

Top Slab 160.00 m

08 Providing and cast in situ C.C. in grade M-25 proportions of

ingredients as per mix design by weigh batching using granite,

quartzite trap metal of size 12 mm to 20 mm and or 6 mm to

12 mm including scaffolding centering formwork, needle

vibrated consolidation, curing and hydrulic testing etc.

complete (excluding cost of reinforcement) upto 6 meter

height / depth Av. G.L. for all water retaining structures.

R.C.C. beams, lintels and bracket for gantry or chain pully 80.00 m3 8,347.00

blocks, plinth beams, tie beams, weather shed etc.

R.C.C. slabs and platform 70.00 m3 8,077.00

R.C.C. columns 60.00 m 3 9,195.00

R.C.C. footings 50.00 m 3 8,077.00

09 'Providing TMT Bar Fe-500/500D reinforcement bars for R. 203.00 MT 77,285.20

C. C. work including bending, binding and placing in position

complete upto floor two level.

Item Qty. Unit Rate in Rs. Amount in Rs.

10 'Grouting with1:3 cement, sand mortar for anchor bolt pockets, 5.00 m3 3,628.28

machine bases, pipe sleeves, pockets holes, etc. including

roughening and cleaning of concrete surfaces, curing, etc.

11 'Supplying, cleaning, cutting, bending, welding, fabricating, 6226.00 Kg 88.38

erecting structural steel in position irrespective of locations

and levels as per drawing including handling and transport etc.

complete including applying two coats of primer red oxide and

two coats of approved quality of paint over it etc. complete as

directed for gentry girder, platform, stairs, chequered plate for

cable trench,grating etc.

12 'Filling in plinth with sand under floors including watering, 80.00 m3 481.70

ramming, consolidating and dressing etc. complete.

13 'Providing and cast in situ C.C. in grade M-20 (proportions as

per mix design or as per table of IS456 2000 in masses by

weigh batching) using granite, quartzite trap metal of size

mm to 20 mm for RCC Work including scaffolding centering

formwork, needle vibrated consolidation, curing complete up

to 6 meter depth or height (excluding cost of reinforcement

and neat finishing) with centering and shuttering/ deshuttering

etc. complete for structure other than water retaining.

b) R.C.C. footings & Raft (without form work) 20.00 m3 5,292.00

14 'Providing and applying with two coats 20 mm thick mala 1620.00 m2 298.10

inside cement plaster with water proofing agent on inside of

Sump of 12 mm thick backing coat of C. M. 1:4 (1 cement :

Coarse sand) and 8 mm thick top coat of C. M. 1:2 (1 cement:

2 coarse sand) etc. complete including necessary curing,

scaffolding required if any etc. complete.

15 'Providing and applying 15 mm thick cement plaster in single

coat on brick work with floating coat of net cement slurry for

interior plastering of wall & Ceiling upto finished even and

smooth in Cement motar 1 : 3 (1 cement : 3 sand) including

racking out joint curing, scaffolding required if any, with

necessary cement finishing etc. complete as directed.

(ii) Ceiling 380.00 m 2 262.08

16 'Interior plain faced 15 mm thick cement plaster (1:3) with 920.00 m 2 270.38

floating coat of neat cement slurry on RCC ceiling where

specified on drawings at two levels including scaffolding,

curing, etc. complete. This rate shall include moulding where

specified. The rate shall include 2% approved quality water

proofing compound (by weight) of cement.

Item Qty. Unit Rate in Rs. Amount in Rs.

17 'Providing and applying 20 mm thick sand faced cement 1350.00 m2 315.69

plaster on walls upto height 10 metres above ground level

consisting of 12 mm thick backing coat of C.M. 1:3 (1-cement

: 3-sand) and 8 mm thick finishing coat of C.M. 1:1 (1-

cement : 1 sand) etc. complete.

18 'Providing and laying cement concrete flooring 1:2:4 (1 760.00 m2 376.51

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including water proofing compound finishing

with a floating of neat cement slurry etc. complete laid in one

layer finished including necessary curing at bottom of sump

Average 50 mm thick

19 'Providing & fixing F.R.C. MH seat cover incl. carting to the 1.00 No. 2,380.00

work site etc. comp. Directed. 'F.R.C. Extra Heavy Duty

(EHD-35) Manhole Covers & Frames Cover: 728mmø &

mm thick circular cover, 35.00MT load design,100 x 2mm MS

flat all round,16mm øplain round bar for lifting the cover &

should be fitted with plastic cups. Frame:560mm ø clear

opening, -888 x 888 x 175mm. On the upper periphery off

rame 25x3 mm wide MS flat should be well embed in concrete

to protect the edges off rame. FRCE.H.D.-35 manhole cover &

frame described as above.

20 'Providing and fixing in position 150 mm diameter CI air 24.00 No. 1,706.00

ventilators including fixing of jali grating and cover and

painting the same. (weight 25 Kg. approx.)

21 Providing and laying one layer of bitumen kraft paper 1102.00 m2 18.00

conforming to IS : 1398 of approved make and quality.

22 'Providing & fixing in position 6.0 m high aluminium water 1.00 No. 10,651.00

level indicator made of 230 mm width and 4mm thick

aluminium sheet fixed on angle 50x50x6 mm frame and

bracing and fixing in concrete base as per specification or as

directed by Engineer-in-charge.

23 'Providing, Cement vata (10cm. X 10. cm. size) quarter round 170.00 Rmt 24.28

in cement motar 1:1 including neat cement finishing, watering

24 'Providing 100 mm x 100 mm size vata in cement concrete 420.00 Rmt 44.00

(1:2:4) including water proofing compounds, smooth finish,

curing, etc. complete for the internal side of the sump, pump

house and chlorination room.

25 'Brick masonry in cement mortar (1:6) using common burnt 210.00 m3 4,502.81

clay building bricks having crushing strength not less than

35kg/cm2 including scaffolding, curing, etc. complete for

walls, parapets, etc. at two levels.

Item Qty. Unit Rate in Rs. Amount in Rs.

26 'Brick work using common burnt clay building bricks having 20.00 m3 4,214.09

crushing strength not less than 35kg / Sq. C. M. in ramp, steps

and Foundation & Plinth in cement morter1:6 (1 cement :

coarse sand) including racking out joints, curing, scaffolding

required if any etc. complete, as directed.

27 Half brick masonry in common brunt clay building bricks 10.00 m

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional

28 Wall painting (two coats) with plastic emulsion paint of 1500.00 m

approved brand and manufacture on undecorated wall surface

to give an even shade including thoroughly brushing the

surface free from mortar droppings and other foreign matter

and sand prepared smooth.

29 Distempering (two coats) with oil bound distemper of 1824.00 m2 112.58

approved brand and manufacture and of required shade on

wall surface to give an even shade over and including a primer

coat with distemper primer of approved brand, and

manufacture after thoroughly brushing the surface free from

mortar dropping and other foreign matter and also inclusive of

preparing the surface even and smooth etc. complete, as

30 Applying two coats of putty & two coats of primer of 1824.00 m2 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

31 'Providing and fixing iron doors including using the frames of 1680.00 Kg 88.38

channels, angles and flats and MS sheets as per drawing

including revating or welding and fixing in concrete block

including iron fixture and fastening with one coat of primer

and 3 coats of enamel paint etc. complete.

Item Qty. Unit Rate in Rs. Amount in Rs.

32 'Providing & fixing in position aluminium fully panelled doors with 17.00 m2 3,456.00

15 micron natural matt brush finish anodised as per over all size

shown on the drawings and aluminium sections of approved make

conforming to IS:733 and IS : 1285, made out of 102 mm x 45 mm x

1.90 mm thick aluminium outer frame section weighing 1.640 Kg/m.

and shutter sections with bottom / lock rail 96 mm x 45 mm x

mm, top rail 48 mmx 45 mm x 2.70 mm weighing 1.38 Kg/m.

vertical styles 48 mm x 45 mm x 1.90 mm weighing 0.976 Kg/m.

with rounded sides, fixed with rawl plugs and screws or with fixing

clips, or with expansion hold esters including necessary filling up of

gaps at junctions, at top, bottom and sides with required

PVC/neoprene felt etc. and aluminium snap beading for glazing /

panelling, C. P. brass/stainless steel screws, including standard

anodised aluminium fittings and fixtures of approved make and of

adequate size and in adequate numbers, double action floor springs

of approved make for each shutter with standard pivot panels of

mm thick pre-laminated three layer medium density, exterior grade

particle board (termite proof, water proof and fire proof) Grade

Type II conforming to IS : 12823 bounded with phenol

formaldehyde synthetic resin, of approved make including cost and

fixing of fixtures etc. complete as per detailed drawings with all lead

33 Providing and fixing window having extruded aluminium 45.00 m2 1,583.95

Colour anodized section frame main outer size 95mm x 24mm

x 1.17 mm (of Jindal Section no : 2459 @ wt. of 0.738 Kg/mt),

horizontal Three track member size 92mm x 31.75 mm x

mm (of Jindal Section no. 8688, @ Wt. 1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50 mm (of Jindal

Section no. 8933, @ Wt. 1.06 Kg/mt.) with sliding shutters of

horizontal member size 40mm x 18mm x .29 mm (of Jindal

section no. 8947 @ wt. 0.456 Kg/mt.) vertical member of size

40mm x 18mm x 1.29mm (of Jindal Section no. 8949 @ wt. of

0.456 Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per

34 Providing and fixing M.S. round or square bars with M.S.flats 370.00 Kg 70.50

at required spacing in wooden frames of windows and

clerestory windows.

35 Providing and fixing standared extruded of alluminimum 13.00 m2 1,175.56

section of size 63mm x 38.10mm x 1.2mm (Jindal Section :

2434, @ Wt. 0.643 Kg/mt.) with colour powder coated

alluminium frame for ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

36 Providing upto floor two level precast cement concrete jali or 8.00 m2 678.93

grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone

aggregate 6 mm nominal size) reinforced with 1.6 mm dia.

Mild steel wire including roughening,cleaning, fixing and

finishing in cement mortar 1:3 and curing complete. (B) 40mm

Item Qty. Unit Rate in Rs. Amount in Rs.

37 Providing & fixing in position aluminium grill with 15 micron 59.00 m2 1,750.00

natural matt brush finish anodised as per over all size shown

on the drawings and aluminium sections of approved make

conforming to IS:733 and IS : 1285, made out of DG -

design ( Jindal or equivivelent ) fixed with required size F

channel, rawl plugs and screws or with fixing clips, or with

expansion hold esters including necessary filling up of gaps at

junctions, at top, bottom and sides with required

PVC/neoprene felt etc. and aluminium snap beading for

glazing / panelling, C. P.brass/stainless steel screws, including

standard anodised aluminium fittings and fixtures of approved

make and of adequate size and in adequate numbers, including

cost and fixing of fixtures etc. complete as per detailed

drawings with all lead and lifts.

38 Providing and laying polished Kota stone slab 20 to 25 mm 73.00 m2 1,410.00

thick in Sills & Jambs of doors, Windows & Vent laid on

mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and

jointed with grey cement slurry including rubbing and

polishing etc. The rate Shall also include half round bullet

edge complete as directed by engineer inchage.

39 Paint on soffit of tank roof slab with 2 coats of bituminous 920.00 m2 156.00

paint including cleaning the surface by scrapping and air

blowers as directed by engineer in-charge.

40 Providing and fixing 40mm dia. GI pipe medium weight 30.00 Rmt 1,350.00

quality as openable type with angle iron support at 1.5 m c/c

using 75 x 75 x 10 mm angles, 1 m long with three rows of

pipes as railing including necessary painting with two coats of

approved quality oil paint over one coat of approved primer

including necessary welding, bolting required, if any.

41 'Painting two coats including priming coat on new steel & 100.00 m2 128.62

other metal surfaces with enamel paint, brushing, interior to

give an even shade including cleaning the surface of all dirt,

dust, other foreign matter.

42 Providing & fixing 50 cm wide MS ladder (without safety 9.00 No. 2,950.00

cage) fabricated from MS flats 10 mm x 75 mm with 20 mm

dia steel bar steps in double rows @ 30 cm C/C. The include

stays of 10 'fixed at 3 mt. C/C with welding anchoring and

coats mm x 50 mm flats anticorrsive paint.

43 Providing & fixing 50 cm wide MS ladder (with safety cage) 37.00 No. 3,285.00

fabricated from MS flats 10 mm x 75 mm with 20 mm dia

steel bar steps in double rows @ 30 cm C/C. The include stays

of 10 'fixed at 3 mt. C/C with welding anchoring and 3 coats

mm x 50 mm flats anticorrsive paint.

44 Providing and fixing PVC pipe of 6Kg./cm2 of 140 mm dia 60.00 Rmt. 349.00

for rain water with shoe.

Item Qty. Unit Rate in Rs. Amount in Rs.

45 Providing & laying white glazed tiles 6 mm thick in flooring, 15.00 m2 963.12

trade of steps and landing on a bed of 12 mm thick cement

mortar 1:3 (1 cement : 3 corse sand) finished with flush

pointing in white cement.

46 Providing & fixing in position 40 mm dia. UGWTS valve 2.00 No 6,527.00

controlling MS rod for operation of valve including T-shape

rod at Top 0.60 mt. length fix at rod centre and extra top at

bottom including 3 coats of bituminous paint and making holes

etc. completed with 1 mt. Above finish slab level of tank.

47 'Providing and laying chequered precast cement concrete tiles 110.00 m2 545.76

22mm thick with aggegate of sizes upto 6mm in floors, treads

of steps and landings on 20mm thick bed of C.M. 1:6 (1-

cement : 6-sand) or L.M. 1:1.5(1-Lime putty : 1.5 coarse sand)

joint with neat cement slurry with pigments to match the shade

48 'Providing and laying polished Kota stone slab flooring over

20 mm (average) thick base of cement mortar 1:6 (1 cement :

6 coarse sand) laid over and jointed with grey cement slurry

including rubbing and machine polishing etc. complete at

office area over plinth of HT Room and top of sump.

49 'Providing and laying polished Kota stone slab 25 mm thick in 20.00 m 2 1,226.46

riser of steps, dado & pillars, skirting, laid on 10 mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with

grey cement slurry including rubbing and polishing etc.

complete at HT Room, LT Room, Office & PH et

50 Providing and laying broken china mosaic flooring for terrace 290.00 m2 779.70

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or sloe and to be tempered to

bring mortar crème out upto surface using white cement

including rounding off junctions and extending them upto

cm along the wall, clearing with water and oxalic acid etc. as

directed. (China Mosaic for pumphouse terrace & H.T., L.T.

& office room terrace)

51 Providing and fixing water tight construction or expansion 1320.00 Rmt 330.00

joints. 150 mm dia wide thin ribbed PVC.

52 Providing and laying rough chiseled dressed stone flooring 519.00 m2 576.79

over 20mm average thick base of cement mortar 1:5 (1-

Cement : 5-coarse sand) or L.M. 1:1.5 (1-Lime putty : 1.5 -

coarse sand) including pointing with cement mortar 1:2 (1-

cement : 2-stone dust) etc. complete. (A) 25mm thick

Item Qty. Unit Rate in Rs. Amount in Rs.

53 Providing and fixing 1.20 Metre high fencing with 2.0 Metre 12.00 Rmt 391.93

long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting

3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire weighting 9.38 Kg.

per 100 Metre, strained and fixed to posts with G.I,staples

including fixing the postsin ground with0.5 M x 0.5.M x

M. block in C.C1:5:10 etc.complete

54 Providing and fixing of 50 dia and 300 mm long PVC 40.00 No 40.00

pipe/spout in RCC beams of U. G. tank roof slab and RCC

peripheral wall on slab top. Rate shall include carting / cutting

in required size and shape etc. complete as directed.

55 Providing,Fabricating and fixing WDS name board of size 1.00 No. 15,185.00

3.0m x 0.6m made from ISA 50 x 50x 5 mm MS angle with

nos. supports at back side vertical member of angle size 1.10m

height (inclu. 0.3m hold fast inserted in compound wall with

necessary dismentaling and fixing with cement concrete. The

rate shall also include 16g MS sheet of size 3.0m x 0.6m

including writing letters with GMC logo as directed by

engineer in charge the rate shall include painting board with

two coats of enamel paint over one coat of anti-corrosive

56 Providing and fixing water closet squatting pan (Indian type 1.00 No. 1,588.61

W.C. pan) size 580 mm x 450 mm white colour vitreous china

long pattern type conforming to IS : 2556 (Part III) together

with 100 mm size vitreous China 'S' trap as per IS : 2556 (Part

XIII) both of an approved make including jointing the trap

with the pan and soil pipe in C. M. 1:1 (1 cement : 1 sand)

with 32 dia. C. P. brass half turn flush cock complete

including earthwork, bed concrete of 1:4:8.

57 Providing and fixing flat back white colour vitreous china 1.00 No. 2,067.36

wash basin 550 mm x 400 mm size with CI brackets painted

white. Wash basin shall have 15 mm dia GI supply pipe,

overflow chase, 15 mm dia pillar cock and stop cock with

PVC bottle trap and PVC pipe piece upto wall plus 32 mm dia

PVC waste pipe upto floor level connected to 32 mm dia CI

pipe below floor and connected to nearby floor trap complete

with unions and plumber's white soldered joints with

necessary cleaning eye, complete. All chases cut in wall for

fixing pipes shall be made good in CM (1:4).

58 Providing laying and jointing in true line and level of

following dia. U.P.V.C Pipe(SCH-40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter

C/C or shall be concelled as directed including necessary

fitting etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Item Qty. Unit Rate in Rs. Amount in Rs.

25 mm dia. 25.00 Rmt 91.84

59 Providing & fixing gun metal check or non return full way

60 Providing and fixing brass screw down stop tap.

61 Providing and fixing screw down bib taps of following size. 2.00 No. 158.86

(C) Gun metal screw down bib tap. i) 15mm dia.

62 Providing and fixing 150 mm x 100 mm intercepting sewer 1.00 No. 750.00

trap embedded in concrete complete including excavation and

63 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- 1.00 No. 11,439.94

cement: 2-coarses and :4- graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand : 6-Brick bats 40+50 mm size) inside plastering

mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand)finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement: 2-Coarses

and : 4-stone aggregate 20 mm nominal size) finished smooth

complete including curing and festing (i) Inside size 900mm x

1200 mm and 2.0 M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be not less

than 128kgs. (Wt. of cover 64Kg. and Wt. of frame 64Kg.) (A)

With 230 mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg./Sq.cm. in Cement

Mortar 1:5 (1-Cement : 5-Coarse sand) (1) A type depth

Metre for 150 mm diameter sewer. (up to 5 mt. depth)

64 Constructing brick masonry chamber for under ground C.I. 1.00 No. 3,660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg.Cm 2in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab e with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.

(ii) Inside dimensions 500mmx700mm and 450mm deep for

pipe line with one or two inlets.

65 Providing and fixing in position PVC vent pipes of 160 mm 1.00 No. 1,289.00

dia 3 m length.

Item Qty. Unit Rate in Rs. Amount in Rs.

66 Providing and fixing cast iron (Spun) Nahni trap of the 1.00 No. 885.25

following nominal diameter of self cleaning design with C.I.

screaed down or hinged grating including cost of cutting and

making good the walls and floor 100mm inlet and 50mm

outlet. (C) 100mm dia.

67 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 No. 1,246.92

masonry chamber and water tight C. I. cover with frame of

300 mm x 300 mm size (inside) with standard weight. (i)

Square mouth traps.(B) 150mm x 100mm size P or R type

68 Providing and fixing100mm size P or Strap for water closet 1.00 No. 330.71

squatting pan including jointing the trap with the pan and soil

pipe in cement Mortar1:1 (1-Cement : 1-Fine sand) (A)

Vitreous China.

69 Providing erecting and fixing double coated (ISI) water tank of 5000.00 litre 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace.

70 Providing, Supplying and fixing ISI mark G.I pipes with

coupling of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete (IS:1239) Medium Duty.

15 mm dia GI pipe sleeves 5.00 Rmt 113.00

25 mm dia GI pipe sleeves 5.00 Rmt 195.00

50 mm dia GI pipe sleeves 5.00 Rmt 387.00

Mechanical Work

Item Qty. Unit Rate in Rs. Amount in Rs.

1.1.1 MECHANICAL WORK: 4 Set 34,67,250.00

VT PUMP-MOTOR SET:

Supply, Installation, Testing and Commissioning (SITC) of Vertical

Turbine Pump with Maximum Two Stag of following duty

parameters & guaranteed efficiency of following MOC, having

RPM max. speed, suitable to couple with motor of specified rating

vertical flange mounted TEFC sq. cage induction motor, along with

column and bowl assembly, discharge head, base channel / Rolled

Steel Joist etc.

MOC: Impeller & sealing rings- CF8M, Bowl & suction bell of CI

FG 260, Shaft with coupling - SS 410, Column Pipe of M.S. ERW

of min. 450 mm dia. & min. 8.0 mm thickness and each piece of

/ 2.5 m long pipes and total length as per actual site requirement and

to achive min. submergence requirement, MS Base plate, Thordon

bearings, and Suction Strainer of SS-304 (size as per pump

manufacturer recommendation), sole plate, Flex. pin-bush coupling,

Hot dip galvanised (HDG) bolts, nuts & washers, gaskets etc.

complete as per IS and Specification.

SITC of approved make, energy efficient, Efficiency Class-IE3,

Vertical flange mounting, solid shaft, squirrel case, Induction motor

rating mini. 250 kW or higher as per IS 12615: 2018 and as per

pump mfg. recommendation, 3Phase, 415V, 50Hz., AC supply,

RPM max.synchronous speed and having TEFC enclosure with

Class F insulation (Temp. rise limited to Class B) with RTD sensors

for winding & bearing temperature protection.

Capacity : 1370 m3 / hr.,

Bowl Head : 42 m,

Motor Rating: min. 250 kW (or higher as per pump mfg.

recommendation)

Bowl Efficiency: min. 84 %

2.1.1 Supply, installation, testing and commissioning of Electric Actuator 4 Nos. 2,21,484.00

operated CI / DI Double Flanged, Sluice Valve with actuator,

integral starter, etc. conforming to IS 14846, PN 1.0 with SS 304 seat

rings and SS spindle with all hot dipped galvanised hardware's, bolts,

nuts & washers, gaskets, etc. as per spcifications.

Size : 450 mm NB (At delivery of VT Pump)

2.2.1 SITC of double flanged DI/CI Dual Plate Check Valve conforming 4 Nos. 91,340.00

to API 594, PN 1.0 with Cast Steel dual door, hinge pin & stop pin

of SS 304, springs of AISI 304 and seat of SS 304, along with all

required accessories, gaskets and hardwares,etc. and as per

specification and complete in all respect.

Size : 450 mm NB (At delivery of VT Pump - DMA -2, Type 1)

2.2.2 Item Description as per 2.2.1 and of following size complete in all 1 No. 3,26,619.00

Size : 700 mm NB (At Header of VT Pump)

2.3.1 Supply, installation, testing and commissioning of Electrically 1 No. 3,56,504.00

Actuator operated Horizontal shaft CI/DI DF Butterfly Valve,

conforming to IS 13095 / BS EN 593, PN 1.0 with SS

renewable seat ring , indicator, gear box with bolts, nuts & washers,

gaskets, etc. as per specifications.

Size: 700 mm NB (At common Header )

Item Qty. Unit Rate in Rs. Amount in Rs.

2.4.1 Supply, installation, testing and commissioning of Manually 3 Nos. 36,403.00

operated Horizontal shaft CI/DI DF Butterfly Valve, conforming

to IS 13095 / BS EN 593, PN 1.0 with SS 304 renewable seat ring

indicator, gear box with bolts, nuts & washers, gaskets, etc. as per

specifications.

Size: 450 mm NB (2 Nos. at each sump comp. I/L & 1 No. befeore

sump I/L Flow meter)

2.5.1 SITC of CI/ DI Tamper proof Flanged Air Valve with Isolation 1 No. 25,759.00

Sluice Valve as per IS 14845 PN-1.0 & IS-14846 PN-1.0

respectively with SS304 float, gun metal nozzle, complete

hardware's, bolts, nuts & washers, gaskets etc. as per IS and

Size: 150 mm NB - (At Header)

3.1.1 SITC of Flange ends Expansion Bellow (PN 1.0) as per EJMA 5 Nos. 18,780.00

standards and as per specs. and complete in all respect.

Size : 450 mm NB x 300 mm (L) (At delivery of VT Pump, 1 No.

befeore sump I/L Flow meter)

3.1.2 Item Description as per 3.1.1 and of following size complete in all 1 No. 37,560.00

Size : 700 mm NB x 300 mm (L) (At Header )

4.1.1 MS PIPES & SPECIALS: 1 RMT 1,465.00

Supply, Gas cutting of pipe, Fabrication, welding, Installation,

testing and commissioning of MS pipe & Specials, reducer,

expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges

confirming to IS 6392-PN-1.0, fabricated from MS. plate with

necessary supports & anchoring. Pipe fabricated from MS plate.

(Excluding supply of flange) as per specs. and complete in all

Size: 168.3 mm OD x min. 4.5 mm Thk (For AV)

4.1.2 Item Description as per 4.1.1 and of following size complete in all 16 RMT 6,801.17

Size : 457 mm OD X min. 8.0 mm Thk (for delivery line)

4.1.3 Item Description as per 4.1.1 and of following size complete in all 25 RMT 10,454.08

Size : 711 mm OD X min. 8.0 mm Thk (for Header )

4.2.1 Supply, Welding, Installation, Testing & Commissioning of MS flat 1 No. 1,180.00

machined faced flanges confirming to IS 6392 & drilled as per IS-

1538 with drilling off centre bolt holes and flange thickness as per

PN 1.0 including cutting & welding.

Size : 150 mm NB - Drilled (for Air Valve on Header Line)

4.2.2 Item Description as per 4.2.1 and of following size complete, 4 Nos. 4,000.00

Size : 450 mm NB (Drilled) - or actual VT pump del. Size

4.2.3 Item Description as per 4.2.1 and of following size complete, 8 Nos. 4,000.00

Size : 450 mm NB (Drilled)

4.2.4 Item Description as per 4.2.1 and of following size complete, 5 Nos. 7,450.00

Size : 700 mm NB (Drilled) - At Header

4.2.5 Item Description as per 4.2.1 and of following size complete in all 1 Nos. 13,820.00

Size : 700 mm NB- Drilled Blind

Item Qty. Unit Rate in Rs. Amount in Rs.

4.3.1 Flanged Joints of Pipes, Fittings and Specials: 4 Nos. 2,131.00

Supply, Installation, Making of Flanged CI / DI / MS / GI Pipes,

Fittings and Specials Joints with all jointing materials, rubber

packing, nut bolts, labour etc. complete the work in all respects.

Size: 450 mm dia

4.3.2 Item Description as per 4.3.1 and of following size complete in all 2 Nos. 3,988.00

Size: 700 mm dia

5.1.1 Providing, Supply of Structure Steel at site of work with freight, 2,000 kg. 64.84

loading, unloading carting, etc. including all taxes and duties

complete such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (min. 8mm

thickness) for cable trench etc. required for support structure of all

Electro-mechanical equipment, piping, etc. for support on floor / wall

/ beam / brackets etc. as per tender and IS.

5.1.2 Labour Charges for lowering, laying, Fixing with fabrication 2,000 kg. 11.37

various size section of MS such as joints, channels, angles, Iron

Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable

trench etc Complete with two coats of red oxide and two coats of

approved colour shade of epoxy paint as per relevant IS and as per

6.1.1 SITC of Single girder type E.O.T. crane with electrically operated 1 Set 5,30,250.00

hoist, class II duty, geared travelling trolly with lift as specified here

below complete with long travel rail track (40 sq.mm. bar), moving

or cross girder, all three motions electrically operated by suitable

rating motor IP54, control panel, & down pendant control block,

brake, safety device, cables from motor to starter panel & other

required accessoaries & manufactured and tested as per IS-807, IS-

3938 & IS-3177, class-II, complete as per IS & Specifications.

Capacity: min. 5 Ton, (at Pump house - For VT Pump lifting)

Lift: 12.0 m or (or as per site req.)

Span: Approx. 8.3 m (or as per site req.)

Bay length: App. 21.0 m (or as per site)

Note: Minimum as specified capacity or higher as per requirement

such that EOT crane capacity is min.1.25 times of the pump /motor

OR single heaviest component to be lifted within pump house.

Item Qty. Unit Rate in Rs. Amount in Rs.

7.1.1 SITC of Electrically Operated Chain Hoist & Electrically 1 Set 3,29,650.00

operated Trolley, suitable to operate on Mono Rail Girder having

motorised motion in vertical lifting & cross travel, manufactured as

per IS:6547-1972-Class-II & IS-3177- Class-II, complete with

electrically operated chain hoist & Electically operated geared

trolley, brake, chain-gear, motors, safety device, pendant push

button, starter panel, cables from motor to starter panel and all other

required accessories like limit switches, panel, power supply system

(Fastoon cable type), fasteners, epoxy painting, etc. tested for over

load as per IS complete as per specifications and complete in all

Capacity : 3 Ton. Min. (At Chlorination Room)

'Lift : 5.00 m as mini. or as per site req.

Bay Length : 7.00 m min. or as per site req.

(w/o MONORAIL GIRDER & MS supporting structure)

Note: (1) Minimum as specified capacity or higher as per

requirement such that ECH capacity is min.1.25 times of the

pump/motor OR single heaviest component to be lifted within pump

8.1.1 SITC of Electric Actuator operated C.I. Sluice Gate conforming 2 Set 6,61,960.00

to AWWA C 501 or IS : 13349 - 1992, Class - 1 with rising spindle,

single faced, wall thimble mounted, handwheel, flange back frame,

head stock, Spindle with supports brackets having length as specified

or to suit site condition, suitable for seating as well as unseating

water head, complete in all respect.

Size : 900 mm x 900 mm - approx. 5.75 m spindle length (At

Suction pit I/L) - Flush Bottom or suitable Closing

Item Qty. Unit Rate in Rs. Amount in Rs.

9.1.1 CHLORINATION SYSTEM 2 Plant 2,10,642.00

SITC of Wall mounted, FRP cabinet type, Vacuum operated Chlorination

plants complete in all respects with required piping, fitting, valves, safety

and testing kit, etc. Complete system combining the Two plants complete

in all respect as per IS and as per specification. (Without Chlorine

Capacity: 5 kg/hr. (Cabinet Type) for each plant.

Each plant shall include the followings:

(1) 1 No. Submersible monoblock Pump motor set with continuous Cable

from pump to starter panel without any Joint with proper conduit piping

(2) 1 No. Diffusers (3) 1 No. Ejector (4) 1 No.Chlorinator, (5) 1 No.

Vacuum Regulators (6) 1 No. Strainer (7) 1 No. NRV on solution line (8)

1 No. Non Return Valve on Booster Pump del. line (9) 1 No.Yoke clamp

(1 No. for each Tonner) (10) 1 No. Pressure Gauge with require piping

and isolation valve for booster pump (11) 1 No. Chlorine Gauge at Cl2

manifold with isolation valve (12) 1 Lot of piping, fittings, valves &

instruments (13) Total 5 nos. or higher as required Isolation valve on gas

manifold (14) Vacuum Gauge (15) MS support of 50 mm x 50 mm x

(1) Filled 900 kg. Chlorine Tonner in the scope of Client.

(2) 1 no. Gas filter shall be provided per manifold.

(3) 1- lot inter connecting piping of identical pipe size of Cl2 booster

pumps delivery line with required no. isolation valves.

(4) 1 no common 3/4" gas manifold of Carbon steel suitable for two

(5) Any other as required to complete the work in all respects.

9.1.2 AUTO SHUT OFF CHLORINE TONNER VALVE SYSTEM 1 Set 8,68,200.00

SITC of Automatic Chlorine Tonner shut off valve of 900 Kg for

single chlorine Tonner for chlorination system comprising of :

(1) 1 No. Pneumatic Auto shut off chlorine Tonner route valve with

actuator system with Air line filter, Solenoid Valve, Air motor, Yoke

clamp, etc. of required capacity, size, rating.

(2) 1 No- Air Compressor

(3) 1 No-Chlorine leak detector of 0-10 ppm capacity

(4) 1 No. Industrial Hooter

(5) 1 Lot-Air piping min. uPVC-SCH 40 for Auto Shut off valve as

(6) 1 Lot- MCC cum PLC with HMI Based Control panel consisting

of minimum 32A, 4Pole MCCB for incoming power supply, starter

for Air compressor as per type-2 cordination chart, min. 32A 4P

MCB power feeder for each booster pump, Wall /stand mounting

booster pump starters as required etc. complete in all respect.

(7) 1 Lot- Interconnecting Electrical & Instrument Power, control &

other required cables, cable tray, earthing etc with required

accessories to complete the system in all respect.

Item Qty. Unit Rate in Rs. Amount in Rs.

9.1.3 Supply of safety kit & testing as specified in the specifications. 1 Set 83,241.00

(1) 1 Set Chloroscope,

(2) 1 set. Air breathing apparatus for 45 min as per IS,

(3) 1 set. Emergency tool kit,

(4) 1 No. Amonia Torch, etc.

Electrical Work

1.1 ELECTRICAL WORKS 1 Set 1,20,663.00

11 kV SWITCHYARD / TWO POLE (DP) STRUCTURE:

Supply, Installation, Testing and Commissioning of 11 kV, 3 Phase, 50 Hz,

Two Pole Structure made of 6" X 3" 'I' section girder having min. 9mtr.

length, 4" X 2" M.S. channels, angles, clamps, nuts, bolts, stay wires

including earthing system etc. suitable for erection of following / indicated

accessories duly connected with ACSR conductor as per approved drawings

& in compliance with requirements of IS/IEC / Power Supply Co.:

(a) 11kV 200A DO (drop out) fuses with S.R.B.P. tubes carries (03 nos.)

(b) 11kV 400A G.O.D. switch complete with insulators, operating handle

with galvanized pipe, square bar etc. (01 set)

(c) 11kV lightning arrestors with clamps (03 nos.)

(d) 11kV shackle (Disc/Pin/Post) as required insulators (06 nos.)

(e) ACSR Dog Conductor (mini. 30Mt.)

(f) 11 kV fiber operating rod

(g) 20 mm dia. GI stay sets (2 sets), required foundation etc.

and to be painted with two coat of red oxide and final two coat of Aluminium

paint at site as per IS.

1.2 H.T. INDOOR SWITCH GEAR PANEL 1 Set 15,68,025.00

SITC of 11 kV, 500 MVA, 630A, Indoor, Extensible type,

Horizontal draw out, Motorised spring charging mechanism,

breaker Vacuum Circuit Breaker Panel (1 No. Incomer +

Nos.outgoing), with EC grade copper busbars along with required

Resin cast CT Dual primary & secondary, Cl: 0.5/5P10, 15VA,

Digital MFM with RS 485 with 3 Line Display, Class-0.5s and PT

(dual secondary) Cl:0.5/3P, min 200VA or higher for metering and

protection, 110V DC power pack for incoming & outgoing feeder,

Annunciator, Hooter, Indicating lamps, Numerical Protection relay

(Current & Voltage Based) with RS 485 with combined protection

for 3O/C+1E/F, S/C, Under & Over Voltage, Transformer Protection

Aux. relay etc. High speed tripping relay, Trip ckt supervision relay,

Fuse failure relay, Digital Power factor meter, Ammeter, Voltmeter

(Only I/C), A/M switch suitable for PLC/SCADA etc. complete in

all respects as per IS, Specification.

1.3 SITC of H.V. CABLES 120 Mtr. 2,615.90

SITC of 11 kV (E), 3C x 240 sq.mm., Aluminium, extruded

innersheath, Armoured, XLPE , H.V Cable as per IS 7098 (part 2)

and Tech. Specification. (DP Structure to HT Panel, HT Panel to

1.4 SITC of the Indoor Heat shrinkable Termination: 5 Nos. 4,798.00

SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C

x 240 sq.mm. XLPE armoured cable with all accessories as required.

1.5 SITC of the Outdoor Heat shrinkable Termination: 3 Nos. 6,763.00

SITC of Outdoor H.T. cable end terminations Kit for 11 kV (E),

3C x 240 sq.mm. XLPE armoured cable with all accessories as

Item Qty. Unit Rate in Rs. Amount in Rs.

2.1 DISTRIBUTION TRANSFORMER 2 Nos. 36,76,840.00

SITC of 800kVA, 11/0.433 kV, Outdoor Transformer continuously

rated, 3-phase, 50 Hz, OFF Load Tap Changer, OCTC, ONAN

cooled, copper double wound core type, vector group Dyn11,

Delta(HT)/Star(LT), Oil immersed winding with temperature rise in

oil / winding 40/45 deg.C above design temperature with neutral

brought out to connect to separate earthing including Terminal

arrangement bushing / cable Box on HT side and cable Box on LT

side, first fill of oil along with Fittings & accessories as per Energy

efficiency Level-2 of IS:1180 (Part-1):2021 and its latest

ammendments and as per Tender Specification.

Note: Transformer shall be suitable for parallel operation.

Minimum requirement shall be as below:

Both transformer shall have " Identical X/R ratio, phase angle shift,

polarity, phase sequence, frequency, position of tap changer. Turns

ratio & voltage ratio".

2.2 Casting of transformer new plinth / foundation including design as 2 Set 40,000.00

per transformer full total weight load capacity / Transformer vendor

recommendation / requirements. Top of transformer foundation shall

be mini. 600mm above finished ground level & two nos. padestal

foundation of size minimum 1.2m x 1.2m each or higher as per

vendor / statutory / electrical inspector requirements with situ

reinforced cement concrete in M 20 using granite, quartzite trap

metal of size 6 mm to 20 mm for RCC work including providing of

53 grade cement & Fe 415 grade TMT bars, scaffolding, centering,

form work, curing etc. complete in all respect to install new

2.3 (a) Supply and levelling of Switchyard & transformer yard using gravel, 110 Sq.m. 340.00

fine sand and other required filing material, enmarked for the

Switchyard & Transformer yard including removing of trees or

boulders etc. if any. The general level of the yard shall be at a

convenient level for movement of man and material and it should

match with FGL and as per Specification and Drg.

2.3 (b) Supply and Installation of GI Chain link fencing frames with L 50 RMt. 1,060.00

angle/Channel post around Switchyard & Transformer yard etc. as

per Specification and Drg.

2.3 (c) SITC of 3.0 mtr wide gate with GI chain link as per Specification 3 Nos. 10,660.00

Item Qty. Unit Rate in Rs. Amount in Rs.

3.1 LOW VOLTAGE (LT) PANEL BOARD (PMCC) : 1 Set 50,69,800.00

SITC of PMCC Panel (50kA), compartmentalised, floor mounted,

operating height maximum 1800/1900 mm, Extensible on both ends,

suitable for Manual & Auto operation -Local & through PLC/SCADA

operation as per site conditions complete in all respects as per Tender

SLD / Specification / IS and including following as minimum:

(1) INCOMER 1&2: FP, 1250A, 50 KA Microprocessor EDO ACB

LSIG with inbuilt RS 485 MODBUS communication with Digital

Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT-Cl :

0.5,10VA, Digital MFM with RS 485 with 3 Line Display Cl. 0.5,

Breaker Control Switch (TNC), A/M switch, Indicating lamps, Push

bottons etc,. with electrical & mechanical interlocking between Incomers

and buscoupler.

(1.1) Surge protection device, 3P + N, Type 2 for lightning/surge

protection. Load sensing CT in Incomer & Busbar for APFC Panel, Cl.-

0.5. Constant voltage/control voltage transformer 1500VA, 415V/230V

AC, with tapping +/-5% in steps of 2.5%, 32A DP MCB & 25A Power

(2) BUS-COUPLER: FP 1250A ACB (same as per Incomer)

(2.1) 2000A TPN, EC grade AL Main busbars. (Busbars size as per

50KA fault level and Temperature rise with current density

(3) TRANSFORMER FIXED COMPENSATION FEEDER (25

KVAr): 2 Sets: Each comprising of 63A FP Thermal Magnetic MCCB,

Ind. Lamp, with Capacitor duty contactor, ON Delay timer, individual

MCCB/MCB as per Tender SLD.

(4) DG Incomer: FP, 2000A, 50 KA Microprocessor EDO ACB LSIG rate incl in above

with inbuilt RS 485 MODBUS communication with Digital Voltmeter price

with VSS, Digital Ammeter with ASS, Resin Cast CT-Cl : 0.5,10VA,

Digital MFM with RS 485 with 3 Line Display Cl. 0.5, Breaker Control

Switch (TNC), A/M switch, Indicating lamps, Push bottons etc,. with

electrical & mechanical interlocking between Mains and DG set.

(5) 260 KVAR APFC POWER FEEDER: 2 NOS:

Each feeder comprising of 630A TPN TM ACB, 50kA with with

Digital Ammeter, ASS, CT, Breaker Control Switch (TNC), A/M switch,

Indicating lamps, etc.complete in all respects.

(6) 250 KW Motor-Soft Starter Feeder(For VT pump)- 4 Nos.

Each feeder comprising of Soft Starter with Internal/External bypass

contactor for 250 kW Motor or higher as per pump manufacturer reco.

with soft starter rating minimum (479A @ 50deg C) with suitable

derating with detachable type door mounted display key pad and with

630A TPN MP MCCB (LSIG), 550A, AC3 duty Line contactor, Semi

conductor fuse, MFM with RS-485, Resin Cast CT Cl: 0.5, SPP, Cooling

fan, Space heater, Minimum Ten-channel temprature scanner with RS-

485, A/M, L/R switch, ON, OFF, TRIP Indication &(Start & E-Stop)

pushbutton etc.

Item Qty. Unit Rate in Rs. Amount in Rs.

(7) 63A TPN TM MCCB FEEDER : 6 Nos. (1 no. EOT Crane at rate incl in above

P.H. ,1 no. for PDB, 2 no. for Chlorination system & 2nos. for price

Each feeder comprising of 63A TPN Thermal Magnetic (TM)

MCCB, with indicating lamps etc.

(8) 32A TPN TM MCCB FEEDER : 2 Nos. :(2 nos. Spare)

Each feeder comprising of 32A TPN Thermal Magnetic (TM)

MCCB, with indicating lamps etc.

(9) 63A TPN TM MCCB FEEDER FOR ALL MCB

FEEDERS: 2 sets:

Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating

a) 6nos. 32A 'C' curve 4P MCB feeders (for 2 nos. DG charging and

sensing, 1no. for 1no ICP/PLC Panel, 1no. Indoor LDB, 2nos. for

b) 4nos. 16A 'C' curve DP MCB feeders (For 2nos. Tr. MB, 1 no.

HT Panel., 1no. Spare)

c) 1 no. 32A 'C' curve 4P MCB with Time switch,32A contactor

4P,ON lamp feeders (for Outdoor LDB)

(10) Multiplication relay as required for dry run protection of

NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt

protection with adj O/L and Adj.S/c (LSIG for MP

MCCB),Extended rotary handle, Terminal spreader, Auxiliary

Change over contact and trip contact as required.2) All MFM, ACB,

Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS

Item Qty. Unit Rate in Rs. Amount in Rs.

3.2 SITC of 260 KVAR at 415V, APFC Panel,compartmentalised, 2 Sets 8,82,336.00

Floor mounted, extensible type on both sides with Horizontal bus bar

arrangement as per site requirement & complete in all respects as per

SLD / Specification / IS and including following as minimum:

1.1 630A, TPN, 50 KA TM ACB with Digital Voltmeter with VSS,

Digital Ammeter with ASS, Resin Cast CT- Cl : 1.0,10VA, A/M,

L/R switch, Indicating lamps, Push buttons etc.

1.2 Microprocessor based APFC Relay,144sq.mm, 16 STEP with RS

485 with minimum operating current 10mA.

2. OUTGOING CAPACITOR FEEDER:

Capacitor feeder of following rating comprising of TPN

MCCB/MCB with ON & TRIP Indication, Capacitor duty

contactor,Heavy duty MPP / gas filled capacitor unit, A/M Switch,

ON Delay timer,ON / OFF Push button, ON, TRIP, Auto & Manual

Indication lamp etc. as per Tender SLD& Specification

2.1 50 KVAR FEEDER: 2 NOS

2.2 25 KVAR FEEDER: 2 NOS

2.3 20 KVAR FEEDER: 4 NOS

2.4 10 KVAR FEEDER: 2 NOS

2.5 5 KVAR FEEDER: 2 NOS

2.6.Two nos. Vacant feeder suitable for 1-50KVAr and 1-25KVAr

to be provided.

NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing

and Metal Impeller / Blade / Vanes of Minimum2nos. or higher

as required at the top of the panel with canopy/hood.

2. For Capacitors of rating ≤ 5 KVAr only, All types viz.

APP/MPP/Gas Filled are acceptable.

3.3 SITC of Lighting Distribution Board (LDB) as under: 2 Nos. 8,911.23

SITC of 3 Phase 4 Wire 4P, double door Prewired LDB each for

Indoor Lighting & Outdoor Lighting Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB (9 nos.)

3.4 SITC of Aux-Power Distribution Board (PDB) as under: 1 No. 20,275.75

3 Phase 4 Wire TPN, 12 way Pre-wired-MOG / MOV PDB for

Auxiliary accessories Load power supply (Aux. load & Rest spare)

Incoming: 63A TPN, MCCB

Outgoing: 12 nos. 32A 4P MCB 'C' Curve (4nos. For pump delivery,

1no. for header, 2nos. for sump compartment, rest spare)

3.5 SITC of LCS pushbutton station ON & OFF (E-stop) set complete 4 Nos. 3,150.00

with Enclosure, necessary mounting/ fixing arrangement on wall /

pipe support etc. to be installed near motors for remote operation, etc.

as per IS and specifications. (including structural steel) (For Pump)

Item Qty. Unit Rate in Rs. Amount in Rs.

4.1 LOW VOLTAGE (LT) CABLES 900 Mtr. 1,635.00

Supply, laying , testing and commissioning of 1.1 kV,

A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) AL / Cu stranded

conductor, Extruded inner sheath cables as per specification & IS.

The cable when laid outside the building shall be laid underground in

trench with brick & sand protection/in DWC pipes as per specified

method and shall be laid in prepared trench/ on cable tray when laid

inside the building.

SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (5R for each

Transformer-1 &2 to PMCC panel Incomer-1 &2, 2R for each

PMCC panel to APFC-1 &2, 8R for DG set To AMF Panel &

AMF Panel To PMCC panel)

4.2 SITC of 3C x 300 sq. mm. A2XFY(X) Cable (2R for each PMCC 250 Mtr. 815.00

Panel to 4nos. 250kW motor)

4.3 SITC of 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. Indoor LDB, 150 Mtr. 144.43

1 no. Outdoor LDB, 1no. For PDB panel, 1 no.for EOT Crane at

4.4 SITC of 4C x 2.5 sq. mm. 2XWY(X) Cable (4 nos. MOV at pump 720 Mtr. 317.14

Delivery, 1 no. MOV on header, 1 no.for ICP, 2nos. For sump

compartmnet , 2 Nos. MOV at ESR Inlet & 12 nos.for street light)

4.5 SITC of 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 100 Mtr. 207.05

nos. Tr. Marshalling Box, 2 nos. APFC CT)

4.6 SITC of 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump-Motor LCS) 100 Mtr. 220.00

4.7 SITC of 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel 100 Mtr. 510.00

4.8 SITC of 12C x 1.5 sq.mm. 2XWY(X) Cable (4nos. MOV at pump 300 Mtr 370.00

Delivery, 1 no. MOV on header, 2nos. For sump compartmnet)

4.9 SITC of 10Triad x 1.0 sq.mm. individual triad and overall shielded 100 Mtr. 620.00

with aluminum mylar tape Signal Cable for RTD (winding &

Bearing ) of motor.

5.1 CABLE END TERMINATION AND CONNECTION: 60 Nos. 976.00

SITC of Double compression Ni-Plated brass cable glands and

crimping type Bimetallic lugs / sockets with necessary tools and

equipment's as specified in specifications and IS. The glands and

lugs / sockets shall be suitable for cable size and type mentioned

below & as per specifications.

1) Earthing the glands and armouring with earthing clamp and

jumper and also connecting to common earth bar.

2) The job also includes, if necessary, supply & fixing of extension

busbar of same material on MCCB or panel board terminal /

connector to connect more than one no. of parallel cables or to

connect higher size cable to lower size unit. The job also includes

earthing the glands and armour of the cable with common earth bar

or flexible copper mesh.(Cable termination qty. shall be as per site

SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (5R for each

Transformer-1 &2 to PMCC panel Incomer-1 &2, 2R for each

PMCC panel to APFC-1 &2, 8R for DG set To AMF Panel &

AMF Panel To PMCC panel)

Item Qty. Unit Rate in Rs. Amount in Rs.

5.2 3C x 300 sq. mm. A2XFY(X) Cable (2R for each PMCC Panel to 16 Nos. 960.00

4nos. 250kW motor)

5.3 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. Indoor LDB, 1 no. 8 Nos. 111.00

Outdoor LDB, 1no. For PDB panel, 1 no.for EOT Crane at Pump

5.4 4C x 2.5 sq. mm. 2XWY(X) Cable (4 nos. MOV at pump 44 Nos. 73.73

Delivery, 1 no. MOV on header, 1 no.for ICP, 2nos. For sump

compartmnet, 2 Nos. ESR Inlet & 12 nos.for street light)

5.5 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 nos. Tr. 8 Nos. 55.55

Marshalling Box, 2 nos. APFC CT)

5.6 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump-Motor LCS) 8 Nos. 180.00

5.7 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel control 8 Nos. 240.00

5.8 12C x 1.5 sq.mm. 2XWY(X) Cable (4nos. MOV at pump Delivery, 14 Nos. 250.00

1 no. MOV on header, 2nos. For sump compartmnet)

5.90 10Triad x 1.0 sq.mm. individual triad and overall shielded with 8 Nos. 280.00

aluminum mylar tape Signal Cable for RTD (winding & Bearing ) of

6.1 CABLE TRAY 150 Mtr. 818.10

SITC of G.I. (hot dip galvanised ) Ladder type medium duty (2mm

thick) Cable Tray with necessary bends, tees, reducers, covers and

clamps for fixing. All material shall be Hot dip galvanised. All

hardware shall be Electro-galvanized/ SS 304 complete in all

respects as per Specification. And including all accessories.

600 x 100 mm - Ladder type

6.2 300 x 100 mm - Ladder type 150 Mtr. 656.50

6.3 150 x 50 mm - Ladder type 250 Mtr. 328.25

6.4 Supply, laying and erection of 125 mm (ID) approved make 100 Mtr. 325.00

Double Walled Corrugated pipes (DWC) of polyethelene

(confirming to IS-14930 II) with necessary connecting accessoies of

same material at required depth for laying of cable below ground /

road surface for enclosing cable and back filling the same to make

ground as per original. (For HT cable).

6.5 Supply, laying and erection of 75 mm ID approved make Double 100 Mtr. 144.00

Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-

14930 II) with necessary connecting accessoies of same material at

required depth for laying of cable below ground / road surface for

enclosing cable and back filling the same to make ground as per

original. (LT cable etc)

6.6 Making Trench/ excavation in soft soil of suitable width and of 100 Mtr. 54.54

depth (minimum 750mm depth (LT) & 1000mm for HT) for laying

cable/ DWC pipe and back filling the same and making the surface as

normal ground as per IS & Ternder Specification/Drg. (For laying of

Item Qty. Unit Rate in Rs. Amount in Rs.

6.7 Cable Protection/ Covering in Trench: Cable Covering with 50 Mtr. 157.56

second class bricks or cement tiles laid cover the cable (top) & also

on both side with sand bedding/cusioning of 75mm.& covering of

150mm Layer of sand above cable (16 bricks per meter.) as per IS

& Tender Drg/ Specification. (For HT/LT cable protection)

complete in all respects as instructed by EIC.

7.1 CHEMICAL EARTHING SYSTEM 14 Set 12,498.75

SITC of Maintenance free chemical earthing (copper) with earthpit

of minimum bore size dia. 225mm Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec.

made of corrosion free Pipes having Outer pipe dia of 48 mm

having 250 Micron copper plating, Inner corrosion free Hot dip

galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat

strip type connection terminal 14mm dia with constant ohmic value

surrounded by highly conductive corrosion resistant chemical

compound with high charge dissipation suitable for electrical

installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of

Back filling compound.. (2nos. for each of DP structur-1 &2 LA, HT

Panel, Neutral of Tr.-1&2, 2nos. for DG set,2 nos. for ICP earthing,)

NOTE: Earthing Resistance value & date shall be painted on the

7.2 SITC of Maintenance free chemical earthing with earthpit of 16 Set 8,370.88

minimum bore size dia. 225mm Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of

corrosion free Hot dip Galvanised (min 150 Microns) Pipes having

Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised

(80 to 100 micron) pipe dia of 26 mm with copper flat strip type

connection terminal 14mm dia with constant ohmic value surrounded

by highly conductive corrosion resistant chemical compound with

high charge dissipation suitable for electrical installation & 3Mtr.

length of Pipe with two nos. 25Kg. bag of Back filling compound.

(2nos. for each for DP structur-1 &2 body, Tr.-1&2, 2nos. for DG

set, 2nos. for LT Panel & 4nos. for grid earthing & all elect.

NOTE: Earthing Resistance value & date shall be painted on the

7.3(a) SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip 1248 Kg. 90.90

galvanized GI Strip including supply & fixing using GI spacers,

saddles when laid inside the building and inclusive of excavation &

refilling of earth when laid outside the building & interconnection

with earth pit & all electro-mechanical equipments.

(50X8 G.I Strip wt.3.12 kg/m, 3.12x400Mt.=1248kg.)

7.3(b) SITC of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip 210 Kg. 90.90

galvanized GI Strip including supply & fixing using GI spacers,

saddles when laid inside the building and inclusive of excavation &

refilling of earth when laid outside the building & interconnection

with earth pit & all electro-mechanical equipments. (25X3 G.I Strip,

Item Qty. Unit Rate in Rs. Amount in Rs.

7.3(c) SITC of 40mm(w) x 6mm(T) etc. sizes Copper Strip including 263 Kg. 937.28

supply & fixing of bolts, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid outside the

building & interconnection with earth pit & Tr. nutral. (40X6 Cu.

Strip, 1.88 Kg/m, 1.88 x 140mtr.=263.2Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth

electrode to individual eqp. Bitumen shall be used at the place of

7.3(d) SITC of 25mm(w) x 3mm(T) etc. sizes Copper Strip including 38 Kg. 601.69

supply & fixing of bolts, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid outside the

building & interconnection with earth pit & PLC Panel (25X3 Cu.

Strip, 0.761 Kg/m, 0.761 x 50 mtr.=38.05Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth

electrode to individual eqp. Bitumen shall be used at the place of

joint/welding. (For PLC Panel to Earthing)

7.3(e) SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, 41 Kg. 90.90

PDB, LCS,Street light pole earthing etc.)

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 400Mt.=41.2)

8.1 INTERNAL WIRING 150 Mtr. 90.90

SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC

insulated ISI marked flexible stranded copper conductor wires with

medium class min. 25mm. dia. Rigid PVC pipe and accessories to be

erected concealed in / to be run on surface / wall / ceiling with

following sizes as mentioned below. The unit rate wirings shall be

with connector, PVC junction box, wires, holder, ceiling rose, angle

holder, switch, sockets, switch board, brass chromium / cadmium

plated machine screws, phase and neutral wires, green Earth

continuity wires etc. as required to complete wiring from LDB panel

to the final outlet termination points. The wiring shall be as per

IS:732, IS:4648 and as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

8.2 As per above but (b), SITC of Mains wiring with 3 wire 2.5 sq.mm 250 Mtr. 113.12

as per tender specification & IS.

8.3 As per above but (c ), SITC of Mains wiring with 4 wire 1.5 sq.mm 200 Mtr. 102.01

as per tender specification & IS.

8.4 As per above but (d), SITC of Mains wiring with 4 wire 2.5 sq.mm 300 Mtr. 141.40

as per tender specification & IS.

8.5 SITC of Point wiring for Light / fan / Bell / Primary Point with 65 Nos. 387.84

2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multistrand copper wires

pipe to be erected concealed in flushed on wall / ceiling, complete

with 6A Tissino Type ISI marked flush type switch / bell push &

accessories erected on metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling

Rose / H. D. connector as directed with medium class Rigid PVC

pipe & accessories.

Item Qty. Unit Rate in Rs. Amount in Rs.

8.6 SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size 6 Nos. 341.38

wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to be erected on wall /

ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type

switch erected with earth continuity connection erected on Metal /

PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

8.7 SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size 6 Nos. 671.65

wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to be erected on wall /

ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type

switch erected with earth continuity connection erected on Metal /

PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

8.8 SITC of Single Phase 20A 3 Pin Matal clad Industrial Type 4 Nos. 820.00

Socket with plug top and 20A SPMCB, suitable for flush

mounting, in 16 SWG MS box of suitable size and covered with

mm thick electrical grade hylam sheet or eqivalent ISI marked

Electrical grade bakelite sheet and earthing with 2.5 sq.mm insulated

copper wire run inside the conduit including interconnections etc.

complete as required.

8.9 SITC of One 300/380 mm dia. Ex fan 16A independent Plug point 10 Nos. 671.65

near Ex. Fan with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires with medium class Rigid

PVC pipe and accessories to be erected on wall / ceiling, complete

with ISI marked 3Pin socket and tissino type switch erected with

earth continuity connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet. Plug point shall

be near Ex.Fan.

8.10 SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, 8 Nos. 3,636.00

having double ball bearing, M.S.blades, mounting frame, forearms,

suitable to operate on 230V,50 HZ AC supply conforming to IS:

2312.Fan shall be painted with epoxy grey colour controlled by one

6 A flush type switch on board and 6A plug point near Ex. fan.

8.11 SITC of 300mm sweep 960 R.P.M exhaust fan, capacitor type, 2 Set 1,883.65

having double ball bearing, M.S.blades, mounting frame, forearms,

suitable to operate on 230V,50 HZ AC supply conforming to IS:

2312.Fan shall be painted with epoxy grey colour controlled by one

6 A flush type switch on board and 6A plug point near Ex. fan.

8.12 SITC of Sheets steel powder coated weather proof enclosure with 1 Nos. 909.00

One no. 32A, 415V 4P MCB for Motor & Inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS:

Item Qty. Unit Rate in Rs. Amount in Rs.

9.1 LED LIGHT FIXTURES & LIGHTING: 30 Nos. 348.45

SITC of Indoor wall mounting 20Watt or up to 25% higher

wattage LED 4 feet Tube Light indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA polyester powder coated and high

U.V. & corrosion resistance with diffuser and/or Polycarbonate

optics with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80 Certificates)

Tube Light with integral / non-integral driver, Surge-4KV,IP-

20, 4 feet, Cat-III

(20nos. for LT Room cum pump house, 3nos. HT room, 3nos. Office

room, 4nos. for chlorination room)

9.2 Item description as per Sr. No. 8.1.1 SITC of 7 watts LED Lamps 6 Nos. 131.30

integral type,cool white with PC diffuser suitable for B22 LAMP

9.3 1200mm sweep ceiling fan, capacitor type, having double ball 4 Set 1,883.65

bearing 450mm down rod, canopies, shackle, rubber bush, blades,

electronic speed regulator, suitable to operate on 230V,50Hz AC

supply conforming to IS: 374/1979.Fan shall be painted with white

9.4 SITC of 40W LED Surface / Wall mounted LED Flood Light 10 Nos. 6,127.67

fittings with High power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name engraved

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Indoor use: (Pump House)

9.5 SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms 25 Nos. 656.50

long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate,

erected on wall or corner for mounting luminaire with necessary

hardware materials duly painted for wall mounting indoor flood

light fixtures on Wall of Buildings & post top lantern.

Item Qty. Unit Rate in Rs. Amount in Rs.

10.1 EXTERNAL LIGHTING (Flood LIGHT): 15 Nos. 7,183.12

SITC of 70W LED Wall mounted LED Flood Light fittings with

High power White LEDs wattage of 1Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Outdoor use:

11.1 EXTERNAL LIGHTING (STREET LIGHT): 12 Nos. 12,598.74

SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long

with single arm & M.S.base plate with pipe cap and over hung 1.5 m

long having dia to suit the socket of 240V LED street light fixtures.

Street light pole unit rate shall be with (i) IP 65 SMC box of size

x 15 x 15 cms. with MCB & terminal strip inside the box with

hinged/sliding door (ii)50mm dia, B class GI pipe bracket

min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp

of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium

duty MS pipe of 4.2 cms. Out side dia complete with suitable sleeve

tubing 45 cms. long of required size of pole top etc. and having

spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one

coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint for Pole,Arm, pipe etc.

11.2 SITC of 70W LED Street light fittings with High power White 12 Nos. 7,050.81

LEDs wattage of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

Street Light (IP-65), Surge -4KV, 70 watt Cat-III

11.3 SITC of M-20 / 1:2:4 cement concrete foundation for Street light 12 Nos. 1,525.10

pole & 70 % PCC from bottom including excavation for the pole of

size 60 x 60 x 120 cms. Deep in below ground level with plinth of

cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with

necessary curing and finishing in approved manner.

Item Qty. Unit Rate in Rs. Amount in Rs.

12.1 DIESEL GENERATOR SET 1 Set 1,02,69,790.00

SITC of 1250kVA (Latest CPCB Norms) at 415 V, 50 Hz, 3 Phase,

wire Prime power rating Diesel Generating Set at design temperature at

40°C and 0.8 PF,complete with necessary controls and safety devices

confirming to relevent ISS/BSS with latest amendements. Diesel Engine

shall be suitable for continuous operation of generator set duty inclusive

of fly wheel, air cleaner, radiator. fan with guard, fuel pump, fuel filter,

Electronic governor, auto main fail electrical starting starter system, 12V

battery, off line battery charger, Advanced digital controller, voltage

regulator, instrument panel, Hospital Grade type Exhaust silencer,

suitable capacity fuel tank, protections against low lubrication oil

pressure, high water temperature.

Alternator shall be 415V, 3 phase, 50 Hz, 4 wire, 0.8 power factor,

Insulation Class-H with temperature rise limited F, self regulated,

brushless type, drip proof confirming to IS:4722 with latest amendments.

The engine and alternator shall be coupled over a sturdy common base

frame. Floor mounted,dust & vermin proof, indoor type, dry type air

filter etc. as per tender specification and complete in all respect as

12.2 SITC of AMF panel with all required metering suitable for above rating 1 Set 4,43,760.00

dg set,3 phase, 415V, AC diesel generating sets complete scope as

detailed below:

Panel shall be Floor mounted, dust & vermin proof, indoor type Panel

shall be consisting of 2000A 4P Microprocessor with LSIG EDO ACB

with Electronic AMF Logic relay (Nb2 or Equivalent) with minimum

functions as per specification i.e 3Line Display MFM, digital voltmeter,

Ammeter, Power factor, frequency, hour meter, Emergency Stop PB,

CTs, with Indication, Alarm & Trip Annunciation as per specification,

Selector switch etc.complete other accessories as per specification and

complete in all respect as required.

13.1 SAFETY ACCESSORIES 6 Nos. 10,231.30

SITC of following safety accessories complete with necessary fixing

brackets, other accessories and tools etc. as required to complete the

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with

nut & bolts grouted in wall complete.

13.2 Supplying of standard first AID box with antiseptic cream, medicine 5 Nos. 353.50

for use on wounds due burn, crepe bandage, guage bandage,

medicated ready to use bandage (Band-aid) adhesive tape for

medicinal user, scissors, antiseptic solution (Savlon or similar) etc.

(All above contents shall be of standard makes)

13.3 Supply & fixing of printed instruction (First Aid) Chart both in 3 Nos. 151.50

English and Gujarati and duly framed with front glasses, for

treatment of person suffering from electric shock.

13.4 Supplying & fixing of floor mounting stand for keeping four nos. of 3 Nos. 2,121.00

FIRE buckets comprising 1500 mm in length, 900 mm height frame

made out of 30mm X30 mm X 4 mm angle iron with cross supports

for legs, welded with 4 hooks and duly painted with one coat of red

lead and two coats of approved enamelled silver paint.

Item Qty. Unit Rate in Rs. Amount in Rs.

13.5 Supply and fixing of 20 W LED emergency light with maintenance 2 No. 2,670.00

free battery for 4 hours operation during mains power failure.

(1 no. for LT Room)

13.6 Supply and laying of Synthetic Insulating Mat of Class - B of min. 3 Sq.mt 3,636.00

thickness 2.5mm as per IS:15652 and with good electrical insulation r.

property for 11kV/22KV as per site requirement. (for HT Panel)

13.7 Supply and laying of Synthetic Insulating Mat of Class - A of min. 16 Sq.mt 1,212.00

thickness 2mm as per IS:15652 and with good electrical insulation r.

property for 1.1KV/3.3KV as per site requirement. (For LT Panel)

13.8 Providing pair of rubber hand gloves ISI make suitable for working 1 No. 252.50

on 22 KV supply

14.1 LIASONING CHARGES FOR OBTAINING NOC 1 Ls. 25,000.00

Power Liasoning Charges for obtaining N.O.C from Electrical

Inspector / Statutory authority for Power / Ele. Installation. (Fees

shall be paid by tenderer for obtaining N.O.C. from Electrical

Inspector / Statutory authority on behalf of client and shall be

reimbursed on submission of original receipt to Client).

Liasoning Charges shall include preparing required attested

documents & drawing for obtaining NOC on behalf of client

(Applicable Fees / deposits shall be reimbursed by Client).

Item Qty. Unit Rate in Rs. Amount in Rs.

Instrumentation Work

1.0 WATER ANALYZER 1 No. 5,72,634.00

Supply, installation, testing and commissioning of Online FRC

cum pH Analyzer with seperate analog output for FRC and pH

shall be provided at WDS complete with transmitter , sensor, sensor

cable, Sensor mounting assembly / Flow through Assembly suitable

for both sensor, Submersible sampling pump and pipe of required

size and length upto instrument / sensor and sample drain pipe back

upto sump, mounting plate ( min. 3 mm thick MSEP) for complete

instrument, 50 micron Filter and rotameter for control the flow as

recommended by vendor at inlet sampling line to FRC Sensor / flow

throgh assembly ,Weather proof enclosure with glass cutout for

transmitter for indoor/ outdoor installation with glass cutout,

accessories, hardware, consumables, mounting stand, etc. complete in

all respects as per specification to measure and monitor the Chlorine

and pH value of supply water from pumping station to distribution.

1.1 Supply, installation, testing and commissioning of Online Turbidity 1 No. 5,40,969.00

Analyzer at WDS complete with transmitter , sensor, sensor cable,

Sensor mounting assembly / Flow through Assembly, submersible

sampling pump and pipe of required size and length upto

instrument / sensor and sample drain pipe back upto sump, mounting

plate (min. 3 mm thick MSEP ) for complete instrument, Weather

proof enclosure with glass cutout for transmitter for indoor/ outdoor

installation , accessories, hardware, consumables, mounting stand,

etc. complete in all respects as per specification to measure the

Turbidity of supply water from pumping station to distribution.

2.0 PRESSURE MEASURING SYSTEM: 4 Nos. 2,213.00

Supply, installation, testing & commissioning of Bourden type

Pressure Guage glycerene filled having 150 mm dial with necessary

fittings/accessories (Manifold valve, nipples, etc. shall be in SS

only) as per specifications & complete in all respects.Pressure gauge

shall be provided on each Pump delivery side.

Range : 0 - 6 kg / sq.cm.

2.1 Supply, installation, testing and commissioning of Blind type 4 No. 45,644.00

Pressure Transmitter along with two valve manifold , required

fittings, tubing (all valves, fittings, tubings, etc. shall be in SS

only), all accessories, hardware, etc. complete in all respects as per

specifications and having following measurement ranges:

Range : 0 - 6 Kg/cm2 (at each pump discharge line )

2.2 Supply, installation, testing and commissioning of Pressure 1 No. 29,147.00

Transmitter with local display along with two valve manifold

required fittings, tubing (all valves, fittings, tubings, etc. shall be in

SS 316 only), all accessories, hardware, etc. complete in all respects

as per specifications and having following measurement ranges:

Range : 0 - 6 Kg/cm2 (at Pump header )

Item Qty. Unit Rate in Rs. Amount in Rs.

3.0 LEVEL MEASURING SYSTEM FOR SUMP 2 Nos. 59,436.00

Supply, installation, testing and commissioning of Ultrasonic type

Level Transmitter with remote type transmitter with 20 meter cable

between Sensor and Transmitter along with all required accessories,

Weather proof enclosure for transmitter for outdoor application,

mounting stand , etc. complete in all respects as per specification and

having following measurement ranges for liquid (Water) application:

The scope also includes providing 4" flanged puddle pipe

approximate 300 mm long including fixing of the same in existing

civil structure slab of Sump for mounting of sensor .The work also

include all necessary work like make hole,repair / modificationin

existing slab, etc.

Meas. Range: upto 10 m (at both compartment of sump)

3.1 Supply, installation, testing and commissioning of Float type Level 2 Nos. 12,802.00

Switch along with 10 mtr. Cable and WP Junction Box (at sump for

dry run protection of pumps through relay multiplication in PLC),

etc., complete in all respects and as per specification.The scope also

includes providing 4" flanged , puddle pipe approximate 300 mm

long including fixing of the same in existing civil structure slabe of

pump house for mounting of level switch.The work also include all

necessary work like make hole,repair / modificationin existing slab,

Meas. Range: upto 10 m (at 2 nos. suction pit of sump )

3.2 Supply, installation, testing & commissioning of Float & Board 2 Nos. 17,718.00

type level indicator along with all accessories, hardware, etc.

complete in all respects as per specifications and having following

measurement ranges:

Meas. Range: upto 7 m (at both compartment of sump)

4.0 ELECTRO MAGNETIC FLOWMETER MAINS OPERATED 1 No. 3,26,026.00

Supply, installation, testing and commissioning of Full Bore

Electromagnetic flow meter comprising of IP-68 Sensor, IP-66

remote type transmitter with 20 m cable between sensor and

transmitter along with all mounting accessories, Weather proof

enclosure for transmitter, hardware, mounting stand, etc. as per

specification and to complete the work in all respect as per site

condition necessary connection with pipe and shall have following

Meter Size : 700 mm NB (At Pump Common header)

Pipe Size : 700 mm NB

4.1 Meter Size : 450 mm NB (At Sump inlet line) 1 No. 2,26,181.00

Pipe Size : 450 mm NB

Item Qty. Unit Rate in Rs. Amount in Rs.

5.0 PLC BASED CONTROL PANEL FOR WDS 1 No. 14,49,556.00

Supply, Installation, Testing & Commissioning of PLC Based

Instrument control Panel with 32" PC Local SCADA with 15 Screen

display / equavalent tag runtime liecence, 1 no. Laptop, PLC

Programming Software licence, 100 Mbps speed Broadband

connection with Static IP ,VPN Router with suitable no. of port, A4

Laser Printer, 4G GPRS modem with (ethernet port + SIM slot),

Bulk message software 100 SMS per day limit thru gateway to client

/ end user, Etherenet switch, SIM card for remote data tranmission to

Client SCADA in future , Communication port for MFM , 1 no. Spilt

type Air Conditioner (2 Ton 5 start rating ), Instrument Control

Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and

wiring , Min. 2 kVA online UPS (with 60 min backup), etc.

complete in all respects and as per specs with PLC having minimum

I/O count of 60DI /28DO / 18AI /2AO. These are the minimum IO

requirement if any other IO,s required to complete the work

contractor shall be provide the same without any extra cost.

Note : Local SCADA shall be suitable to received the data from

ESR and Distribution network PLC and Monitor and Control

the ESR and Distrubution network from Local SCADA and

transmit the Data of WDS, ESR and Dist. network to Client

SCADA in future .

6.0 INSTRUMENT CABLE & ACCESSORIES 600 MTR 146.00

'Supply, Laying, Installation, Connection, Termination, Testing & .

Commissioning of Instrument Cables as per specs.

The unit rate shall include

a) Supply, loading & unloading of the cable at site from store.

b) Shifitng of cable from site store to place of installation.

c) Fixing of cable clamps, brackets, supports, route markers etc.

where ever required to fix the cables safely.

d) Excavation, back filling and levelling of ground alongwith laying

of fine sand, protection bricks and other necessary civil material for

laying cables outside the building.

f) Testing and submission of sketches & reports of all the cables laid.

6.1 SIGNAL CABLE 800 MTR 133.00

6.2 CONTROL CABLE 500 MTR 330.00

7.0 INSTRUMENT CABLE TRAY 25 MTR 730.00

Supply and installation / erection of Perforated type cable tray of .

galvanized mild steel sheets of 2 mm thickness with required,

hardware, fitting and support structral asccessories . All material

shall be Hot dip galvanised as per IS 2629 and tray hardware shall

be in GI. Support structutre shall be of structral steel for mounting

the cable tray on wall / cable trench or as per site condition,

450 X 25 mm - Perforated type

7.1 100 X 25 mm - Perforated type MTR

7.2 50 X 25 mm - Perforated type MTR

Item Qty. Unit Rate in Rs. Amount in Rs.

8.0 CABLE END TERMINATION AND CONNECTION : 22 Nos. 160.00

'Supply, fixing, connection, testing and commissioning of double

compression brass cable glands and crimping type Bimetalic lugs /

sockets with necessary tools and equipments as specified in

specifications and IS complete in all respects. The glands and lugs /

sockets shall be suitable for cable size and type mentioned above.

The job also includes earthing the glands and armour of the cable

with common earth bar or flexible copper mesh as applicable.

8.1 SIGNAL CABLE 30 Nos. 160.00

8.2 CONTROL CABLE 26 Nos. 230.00

Distribution Network Instrumentation Work

1.0 LEVEL MEASURING SYSTEM FOR ESR ( ESR 1 & 2) 2 Nos. 71,113.00

SITC of Hydrostatic type Level Transmitter with Local Indicator

and 4-20 mA Retransmission output with 40 meter cable along with

all required accessories, Weather proof enclosure for Local indicator

for indoor / outdoor application, mounting stand, structure steel, etc.

complete in all respects with local and remote display at

HMI/SCADA, as per specification and having following

measurement ranges for liquid (water) application:

Meas. Range: upto 10 m (at new ESR)

The scope shall also includes 65mm Dia. uPVC Pipe puddle pipe

with flange including fixing in ESR slab, uPVC guide pipe min sch.

40 or higher of required size & length & fixing of the same in

existing civil structure slab / puddle flange of ESR for mounting of

Instrument . The work also include all necessary work like making

required opening, fixing of pipe & grounting / making it set right, etc.

2.0 LARGE SIZE LED DISPLAY (For ESR) 2 Nos. 20,160.00

Supply, installation, testing and commissioning LED diplay 8" size

(320 mm H X 650 mm W X 50 mm D) with 4-20 mA Input at ESR

to monitor the level of ESR from distance , all required accessories,

etc. complete in all respects as per specification.

Note: ESR Large Display shall be mount at ESR.

3.0 Supply, installation, testing and commissioning of Pressure 4 Nos. 29,147.00

Transmitter with local display along with two valve manifold

required fittings, tubing (all valves, fittings, tubings, etc. shall be in

SS 316 only), all accessories, hardware, etc. complete in all respects

as per specifications and having following measurement ranges:

Range : 0 - 2 Kg/cm2 (DMA1 Dist. netwok pipe label no. P1/033,

PI/059, DM2 Dist. network PL. P2/006, P2/055)

Item Qty. Unit Rate in Rs. Amount in Rs.

4.0 ELECTRO MAGNETIC FLOWMETER MAINS OPERATED 2 Nos. 2,63,124.00

Supply, installation, testing and commissioning of Full Bore

Electromagnetic flow meter comprising of IP-68 Sensor , IP-66

remote type transmitter with 20 m cable between sensor and

transmitter along with all mounting accessories, Weather proof

enclosure for transmitter, hardware, mounting stand, etc. as per

specification and to complete the work in all respect as per site

condition necessary connection with pipe and shall have following

ESR Inlet line Flow meter shall be installed in vertical pipe line with

proper support while D/N flow meter shall be installed in horizontal

Meter Size :500 mm (At inlet pipe of ESR1 & 2 )

Pipe Size : 500mm NB

4.1 Meter Size :150 mm (at DMA1 Dist n/w PL no. P1/033 & DM2 2 Nos. 82,972.00

Dist. n/w PL no. P2/006 )

Pipe Size : 300mm, 250 mm NB

4.2 Meter Size :100 mm (at DMA2 Dist n/w PL no. P2/055) 1 No. 65,837.00

Pipe Size : 200 mm NB

4.3 Meter Size :80 mm (at DMA1 Dist n/w PL no. P1/059) 1 No. 61,837.00

Pipe Size : 200 mm NB

5.0 PLC /RTU CONTROL PANEL FOR ESR 2 & DIST. N/W 5 Nos. 3,66,146.00

Supply, Installation, Testing & Commissioning of PLC Based

Instrument control Panel with 4G GPRS modem with (ethernet port

+ SIM slot ) for remote data tranmission to WDS SCADA,

Instrument Control Panel '(PLC Enclosure / Panel ) with necessary

wiring , Required no. of DP MCB for 3 phase Power Supply to

Motorized valve, 1 kVA UPS (with 60 min backup alongwith filter

for harmonic, suitable rating SMF batteries ), etc. complete in all

respects and as per specs PLC having minimum I/O count of 10DI /

6 DO / 4AI /2AO. For Field mounted 4 nos. FT and 4 nos. Pressure

Tx. in distribution network)

The scope shall also include providing MS section Pillar with

lockable door to enclose the PLC Panel suitable for installation in

6.0 INSTRUMENT CABLE & ACCESSORIES 150 MTR 146.00

'Supply, Laying, Installation, Connection, Termination, Testing & .

Commissioning of Instrument Cables as per specs.

The unit rate shall include

a) Supply, loading & unloading of the cable at site from store.

b) Shifitng of cable from site store to place of installation.

c) Fixing of cable clamps, brackets, supports, route markers etc.

where ever required to fix the cables safely.

d) Excavation, back filling and levelling of ground alongwith laying

of fine sand, protection bricks and other necessary civil material for

laying cables outside the building.

f) Testing and submission of sketches & reports of all the cables laid.

Item Qty. Unit Rate in Rs. Amount in Rs.

6.1 SIGNAL CABLE 200 MTR 133.00

6.2 CONTROL CABLE 50 MTR 330.00

7.0 INSTRUMENT CABLE TRAY 50 MTR 291.00

Supply and installation / erection of Perforated type cable tray of .

galvanized mild steel sheets of 2 mm thickness with required,

hardware, fitting and support structral asccessories . All material

shall be Hot dip galvanised as per IS 2629 and tray hardware shall

be in GI. Support structutre shall be of structral steel for mounting

the cable tray on wall / cable trench or as per site condition,

50 X 25 mm - Perforated type

8.0 CABLE END TERMINATION AND CONNECTION : 12 Nos. 160.00

'Supply, fixing, connection, testing and commissioning of double

compression brass cable glands and crimping type Bimetalic lugs /

sockets with necessary tools and equipments as specified in

specifications and IS complete in all respects. The glands and lugs /

sockets shall be suitable for cable size and type mentioned above.

The job also includes earthing the glands and armour of the cable

with common earth bar or flexible copper mesh as applicable.

8.1 SIGNAL CABLE 20 Nos. 160.00

8.2 CONTROL CABLE 2 Nos. 230.00

9.0 FLEXIBLE CONDUIT 60 MTR 70.00

1" Pre flexible conduit for field mounted Flow and Pressure Tx. .

10.0 CHEMICAL EARTHING SYSTEM 10 Set 10,487.29

SITC of chemical earthing with earthpit of minimum bore size dia.

225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS-3043:1987 made of corrosion free G.I. Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia

of 40 mm having 200-250 Micron galvanising or copper coated solid

steel road / flat strip type connection terminal 14mm dia with

constant ohmic value surrounded by highly conductive corrosion

resistant chemical compound with high charge dissipation suitable

for electrical installation covering Sensitive computer system (like

Automation, SCADA) & of 3Mtr. length of Pipe with two nos.

25Kg. bag of Back filling compound. (2nos. for each PLC Panel )

NOTE: Earthing Resistance value & date shall be painted on the

Item Qty. Unit Rate in Rs. Amount in Rs.

11.0 Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper 38 Kg. 601.69

Strip including supply & fixing of bolts, saddles when laid inside the

building and inclusive of excavation & refilling of earth when laid

outside the building & interconnection with earth pit & PLC Panel

(25X3 Cu. Strip, 0.761 Kg/m, 0.761 x 500mtr.=38Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth

electrode to individual eqp. Bitumen shall be used at the place of

joint/welding. (For PLC Panel to Earthing)

12.0 Supply, Installation, Testing and Commissioning of CI/ DI D/F 2 NOS. 2,12,897.00

Butterfly Valve, extended spindle of required length with head

stock, as per IS 13095, PN 1.0 with Electrically Actuator (With 4-

20 mA O/p) Gear operated with of following sizes with SS

seat rings, SS rising spindle with all hot dipped galvanised

hardwares, bolts, nuts & washers, gaskets including all taxes,

insurance, transportation, freight charges, Inspection Charges,

loading unloading, conveyence to pump house, stacking, security etc.

complete as per IS and Specification.

Size: 500 mm NB (at inlet Pipe of ESR-1&2)

13.0 MS PIPES & SPECIALS: 3 RMT 1,465.00

Supply, Gas cutting of pipe, Fabrication of reducer & expander,

welding, Installation, testing and commissioning of MS pipe of min.

thk. given below, Specials, reducer, expander etc. conforming to IS

3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS.

plate with necessary supports & anchoring. Pipe fabricated from MS

plate. (Excluding supply of flange)

Size: 150 mm NB X 4.5 mm Thk

13.1 Size : 200 mm NB X 6.3 mm Thk 5 RMT 2,553.00

13.2 Size : 250 mm NB X 6.3 mm Thk 3 RMT 3,195.00

13.3 Size : 300 mm NB X 7.1 mm Thk 3 RMT 4,456.00

14.0 G.I. PIPES & FITTINGS: 1 RMT 716.00

Supply, installation, connection with equipments as required, testing

and commissioning of GI pipe conforming to IS-1239 , Heavy Duty

with coupling, tee, bend, union, elbow, flanges , etc as all required

fittings for connection complete with gaskets, hardware, and required

accessories as per IS & Specifications.

Size: 80 mm NB (for Flow meter)

14.1 Size : 100 mm NB (for Flow meter) 2 RMT 1,026.00

15.0 Supply, installation, testing and commissioning of double flanged 1 Nos. 4,656.00

Expansion Bellows confirming to EJMA/IS standard with PN

rating & all necessary St.St. hardware's.

Size : 150 mm x 300 mm (L) ( For Flow Meter)

15.1 Size : 500 mm x 300 mm (L) ( For MOV & Flow Meter) 4 Nos. 22,200.00

16.0 Supply, welding , Installation, testing & commissioning of MS flat 4 Nos. 690.00

machined faced flanges confirming to IS 6392 & drilled as per IS-

1538 with drilling off centre bolt holes and flange thickness as per

PN 1.0 including cutting & welding.

Size : 80 mm NB - Drilled

Item Qty. Unit Rate in Rs. Amount in Rs.

16.1 Size : 100 mm NB - Drilled 4 Nos. 800.00

16.2 Size : 150 mm NB - Drilled 8 Nos. 1,180.00

16.3 Size : 500 mm NB - Drilled 8 Nos. 4,650.00

17.0 MECHANICAL COUPLING 4 Nos. 4,311.00

Supply, installation, testing and commissioning of following flanged

ends Mechanical Joint Coupling of manufactured of DI material and

suitable for joining CI / DI /MS pipes of plain ends confirming to

applicable IS/manufacturer standard having PN 1.0 rating & with

sealing rings, sleeve of suitable lengths, tie rods, nuts with washers

and all necessary St. hardware's for providing leak tight loint.

Size : 200 mm NB (for Pipe Label no. P1/059, P2/055)

17.1 Size : 250 mm NB (for Pipe Label no. P2/006) 2 Nos. 5,199.00

17.2 Size : 300 mm NB (for Pipe Label no. P1/033) 2 Nos. 5,655.00

18.0 Flanged Joints of Pipes, Fittings and Specials: 4 Nos. 434.00

Supply, Installation, Making of Flanged CI /MS/ GI Pipes, Fittings

and Specials Joints with all jointing materials, rubber packing, nut

bolts, labour etc.for complete connection.

Size: 80 mm dia. (for Flow meter)

18.1 Size: 100 mm dia. (for Flow meter) 4 Nos. 477.00

18.2 Size: 150 mm dia. (for Flow meter) 8 Nos. 611.00

18.3 Size: 500 mm dia. (for Flow meter & MOV) 8 Nos. 2,588.00

19.0 LIASONING CHARGES FOR STATUTORY 5 Nos. 10,000.00

APPROVAL/OBTAINING POWER NOC

Liasoning Charges for obtaining power as required / N.O.C for

Electrical Installation from Electrical Inspector / Statutory authority

for LT Power ( at ESR & Dist. network)

Tools & Test Equipment

1.0 OFFICE FURNITURE 1 No 6,000.00

Office Table of size 1200 mm length X 600 mm width

1.1 Steel Office chair 3 Nos 3,000.00

1.2 Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D) 1 No 18,000.00

2.1 Magger of range 0 -1000V 1 No 6,000.00

2.2 Clipon meter (Battery operated) satisfying the following. 1 No 8,000.00

(i)With 0.100 mA, 0-1 A and 0-200 A AC

(iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100)

Ohm, (0-1000) Ohm.

(iv) The input impedence shall not be less than one maga ohms for

2.3 Single Phase Elect. Portable Air blower 1500 RPM 1 No 6,000.00

3.0 LADDER 1 No 15,000.00

Ladder shall be made out of light aluminium allow of good strength.

They shall be of step ladder, foldable, self supportig type with

sperader of metalic angles or high strength.

Item Qty. Unit Rate in Rs. Amount in Rs.

Note: Above items shall be handed over to GMC before the commencement of O&M period for proposed WDS.

PROVIDING AND LAYING RISING MAIN FROM WDS TO ESR IN TP- 28 AND 29 PART-I

SCHEME OF GMC AREA

01 Excavation for pipe line trenches distribution network, valve

chambers for all required gradient and line including safety

provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc. complete

for all lifts and strata as specified.

In all sort of soils and soft murrum

02 Providing and supplying DI K-9 grade pipe with EPDM gasket

for following nominal bore diameter with internal cement

mortar lining including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to site, stacking etc. complete. (IS 8329-2000).

800 mm dia. DI pipe (K-9) 785.00 Rmt 16,455.00

1000 mm dia. DI pipe (K-9) 20.00 Rmt 23,976.00

03 Lowering, laying and jointing DI Pipes of various classes with

specials of following diameters in proper position grade and

alignment as directed by Engineer in charge.

800 mm dia. DI pipe (K-9) 785.00 Rmt 635.00

1000 mm dia. DI pipe (K-9) 20.00 Rmt 914.00

04 D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron

flanged Socket Spigot Bends, tees,reducers or any other

specials as per BS-EN-545/1995 Class-A series K12 suitable

for use with D.I Pipes manufactured as per IS:8329/1994

delivery of specials to site of works any where in Gujarat

including fixing, all taxes, loading, unloading, carting,

stacking,insurance, inspection charges, octroi etc. complete.

Above 300 mm dia 5324.00 Kg 151.00

05 Providing and laying cement concrete M20 for thrust block 115.00 m3 4,422.47

and encasing including formwork but excluding the cost of

reinforcement with curing etc. complete, as directed.

06 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 3.00 MT 77,285.20

C. work including bending, binding and placing in position

complete upto floor two level.

07 Providing and laying cement concrete 1:2:4 (1 cement : 2 3.00 m3 3,758.19

coarse Sand :4 Graded stone aggregate 20 mm nominal size)

and curing etc. complete excluding cost of form work.

Item Qty. Unit Rate in Rs. Amount in Rs.

08 Providing,supplying ,fixing ISI mark Ductile Iron D/F

manually gear operated SLUICE VALVE including taxes,

insurance, transportation, fright charges, Octroi Inspection,

charges, loading , unloading, conveyance to site stacking, etc.

complete valve with ISI mark only

PN 1.0 with hand wheel /cap operated (PD Type Short body)

09 Providing and supplying CI/DI Tamper proof /Bi Stream Air

valves with SS 304 Float gun metal nozzle of approved make

& quality of following class and diameter including all taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores,

stacking etc. complete.

With isolating sluice valve PN

10 Lowering, laying & jointing in position following air Valves 2.00 No. 857.00

including cost of all labour, jointing material, including nut

bolts & giving satisfactory hydraulic testing, etc. complete.

With Isolating Sluice Valve PN

11 Refilling the pipeline trenches including ramming, watering, 2567.00 m3 22.00

consolidating disposal of surplus stuff as directed within a

radium of 3 Km.

12 Extra rate over item of excavation of earth for excavation of

asphalt pavement/RCC of thickness upto 0.30 meter including

demolishing the asphalt carpet, metal, soiling/cutting

Reinforcement etc. comp. with stacking the material as

up to 0.30 meter (By any type of Breaker Machine or R.C.C 135.00 Smt 200.00

Cutter machine including cost of operator, fuel &

transportation etc complete.

13 Reinstatement of Bituminous road including with 40 mm thick 135.00 Smt 1,945.00

Bituminous Concrete using 5.4 % Asphalt ,50 mm thick DBM

using 4.5 % Asphalt with tack coat using RS 1 emulsion @

2.5 Kg/Sqm , with Tack coat using RS 1 emulsion @

Kg/Sqm, Prime coat with SS 1 emulsion @ 7.5 kg/Sqm,250

mm thick WMM , 200 mm thick GSB V loosening and

recompacting ground as per respective MoRTH specification

and as directed by engineer in charge.

Item Qty. Unit Rate in Rs. Amount in Rs.

14 Providing F.R.C. MH seat cover incl. carting to the work site 4.00 No. 2,380.00

etc. comp. Directed. F.R.C. Extra Heavy Duty (EHD-35)

machinehole Covers & Frames Cover: 728mmø & 100 mm

thick circular cover, 35.00MT load design,100 x 2mm MS flat

all round,16mm øplain round bar for lifting the cover & should

be fitted with plastic cups. Frame:560mm ø clear opening, -

888 x 888 x 175mm. On the upper periphery off rame 25x3

mm wide MS flat should be well embed in concrete to protect

the edges off rame. FRCE.H.D.-35 machinehole cover &

frame described as above.

15 Demolition and disposal of unserviceable materials with all

Unreinforcement Cement Concrete 100.00 m3 639.72

16 Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift

17 Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift

In Cement Mortar 100.00 m3 577.92

18 Construction of chambers in RCC M30 with Ordinary

Portland cement with TMT Fe-500 reinforcement, PCC150

mm thick in M 15 ,15 mm thick inside cement plaster in

C.M.1:3 and depth of chamber from G.L. to pipe invert level

including complete civil works and inclusive of the cost of of

excavation, refilling and PVC foot steps including providing

RCC Slab in one single piece with fixing of FRC (heavy duty)

manhole frame and cover or RCC 25 Precast slab in parts with

key hole etc. complete.

RC.C. Top Slab 9.00 m3 8,213.00

RC.C. Base Slab 9.00 m 3 8,213.00

TMT Fe-500 Reinforcement 5.00 MT 77,285.20

15 mm thick Inside Cement Plaster in CM 1 : 3 96.00 m2 185.41

FRC Manhole 4.00 No. 2,380.00

Refilling 71.00 m3 22.00

PVC steps 36.00 No. 87.00

Item Qty. Unit Rate in Rs. Amount in Rs.

1 RCC ESR 15 Lacs. Litre capacity 24 mt. Staging Height

Overhead Tank (ESR-1) in Exist. WDS Plot of TP-7

Designing, structurally (and aesthetically) complying Provisions of

relevant lndian standards and constructing 15 Lac litre capacity 24 mt.

staging height RCC Elevated Service Reservoir (RCC M-30 grade

concrete and reinforcement TMT Fe-500) of the below mentioned size

using latest S.B.C. of proposed site, Seismic zone-03, Wind speed Zone.

Including (1) Container shape any suitable type(or as specified). (2)

Staging consisting of column brace trestle / combination column- brace

trestle and shaft as appropriate(or as specified) and (3). This includes

excavation in all types of soil strata(induding hard rock ). casting100

mm thick P C.C. levelling course in M-10 . Refilling the pit with

proper soil and disposing of the surplus stuff at all required lead. (4)

This will also include cement plaster in CM 1:3 with approved water

proofing compound all over inside container (ie. walls, base, top

slab/dome bottom etc. all). (5) Providing and fixing of any

accessories(specified) like MS / GI ladder, Cl Manhole frame and

covers, water level indicator , lightening conductor, Gl Pipe railing

around walk way, at roof level, at gallery and around landing of inside

shaft, Adequate cowl type ventilators or lantern type ventilator with

stainless steel jali. (6) Scope of work includes constructing RCC spiral

staircase with adequate tie beams, staircase footing , ventilating shaft

and ventilators as well as door in shaft, SS grating to be provided to

outlet pipe (Inside container) for safety. (7) including providing and

applying three coats of cement paint/snowcem (as specified) to the whole

structure. (8) It also includes satisfactory water tightness test as per

relevant I.S Code and painting name of scheme & capacity on the tank

as per direction of engineer in charge. (9) It also includes satisfactory

water tightness test as per relavant IS code and painting name of scheme

& capacity on the tank as per direction of Enginner in charge.

List of Indian Standard for design of ESR :

Note : The structural design of ESR shall be in accordance

with provisions of relevant Indian Standards

I.S. 3370 part I & II 2009 or its latest revision (1:1) I.S.

Part III & IV 1965 or its latest revision

IS 456-2000 or its latest revision

IS 11682-1985 or its latest revision

IS 1893-2002 Part I to V or its latest revision

Is 13920-1993 or its latest revision

IS 875 Part I to III, 1987 or its latest revision

IS 11089-1987 or its latest revision

2 General Specifications :

The Min. concrete grade for RCC shall be M:30. Proportion

of concrete ingredients shall be as per Mix design using weigh

Item Qty. Unit Rate in Rs. Amount in Rs.

TMT Fe-500 or higher grade reinforcing bars confirming to

IS:1786/1139 or TMT bars shall be used as per detailed

In case of column -brace trestle type staging having more than

6 columns internal horizontal bracing is obligatory.

Min. size/ thickness of various components shall be provided

as per design criteria/specifications/IS Code (or as per std.

practice). Capacity of the ESR shall be considered excluding

Minimum dimensions specified for various components in

tender data /specifications should be provided.

The foundation shall be referred from latest SBC test report

or tender datasheet. During execution If poor soil strata or

ground water table is encountered, the SBC shall have to be re

ascertained and the design should be revised accordingly

Maximum spacing between horizontal bracings shall be 5 m

(storey height)

The BB Masonry cabin with MS door shall be constructed

when spiral staircase is outside the staging.

RCC Staircase/ MS Staircase shall be provided and fixed for

access to roof when height of roof from G.L. is up to 10 m. For

ESR having more than 10 m height proper RCC staircase or

suitable RCC spiral staircase shall be constructed. Railing

should be provided through out the staircase and around the

For ESR-having staging height more than 15m the spiral

staircase shall be provided inside the staging with effective

tie beams in more than one direction

Water level indictor shall be provided and fixed float type

/electronic (as specified).

The rate shall include cost of dewatering during execution

making all arrangement with any dewatering technique.

The structure shall be designed properly for uplift due to

Ground water table specified in data or GWT encountered

during execution. No extra payment shall be paid for the same.

Effective curing shall be carried out up to required period as

per specifications.

Item Qty. Unit Rate in Rs. Amount in Rs.

Agency shall engage quailfied (at least graduate)consulting

engnieer for designing the structure and he/she shall visit the

site for guidance of work at all levels (i.e.below foundation,

up to GL. above GL for all lifts up to container).

75% part rate shall be payable for Concrete, Reinforcement

and Plastering items of container until satisfactory hydraulic

testing for watertightness is performed. Or as per tender

condition. Till then the work shall be treated as incomplete.

Above conditions/ general specifications Sr. No. 1 to 16 are

part & parcel of tender (contract)

Capacity of ESRs (shell type container like cylindrical,

conical, intze, folded plates & its combination)

Cost of 15 lacs liter capacity (For Seismic zone-3) 1.00 No. 1,35,14,809.00

2 Providing and fixing flanged D.I.D.F. / Class K-9 pipes

vertically for RCC Reservoir incl. providing clamps at every

mt incl. jointing materials such as nuts, bolts, rubber packing,

hydraulic testing and necessary scaffolding etc. complete.

700 mm dia. Inlet pipes and overflow pipes 70.00 Rmt. 25,369.00

700 mm dia. Outlet pipes 40.00 Rmt. 25,369.00

300 mm dia. Washout pipes 40.00 Rmt. 7,219.00

3 Providing, supply and Delivery of Ductile Iron flanged 'ended

fittings / specials conforming to relevant IS, to 'store or site of

work including freight, loading, 'unloading, stacking all taxes,

insurance and including 'jointing with jointing materials like

'gaskets, nuts and bolts etc. as required for inlet,'outlets,

overflows, washout etc.

Duct foot bends

For 300 mm dia. 156.00 Kg. 155.00

Crippling flanges

For 300 mm dia. 110.00 Kg. 155.00

For 700 mm dia. 304.00 Kg. 158.00

For 300 mm dia. 45.00 Kg. 155.00

4 Providing and supplying of approved make of D.I. / S.G. Iron

double flanged butterfly valve of following class and diameter

confirming to IS 13095-1991 with electric actuator operating

system including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to site, stacking etc. complete. PN-1.0 with gear

operated (PD type short body)

For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 44,652.00

For 300 mm dia. for washout (Sluice valve) 1.00 No. 20,384.00

Item Qty. Unit Rate in Rs. Amount in Rs.

5 Lowering, laying and jointing in position C.I. / D/F Butterfly

valves, Sluice valves of following dia. including cost of all

labour, jointing material, including nut, bolts and giving

satisfactory hydraulic testing etc, complete.

For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 2,905.00

For 300 mm dia. for washout (Sluice valve) 1.00 No. 1,141.00

6 Providing and supplying CI/DI Temper proof Air valves with

SS 304 Float gun metal nozzle of approved make & quality of

following class and diameter including all taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to site, stacking etc.

complete.With Isolating Sluice Valve PN

With Isolating Sluice Valve PN

7 Lowering, laying & jointing in position following air Valves

including cost of all labour, jointing material, including nut

bolts & giving satisfactory hydraulic testing, etc. complete.

8 Construction of chambers in RCC M30 with TMT Fe-500

reinforcement, PCC150 mm thick in M 15 ,20 mm thick inside

cement plaster in C.M.1:3 with OPC cementand depth of

chamber from G.L. to pipe invert level including complete

civil works and inclusive of the cost of of excavation, refilling

and PVC foot steps including providing RCC Slab in one

single piece with fixing of FRC (heavy duty) manhole frame

and cover or RCC 1:2:4 Precast slab in parts with key hole etc.

RC.C. Top Slab 3.00 m3 8,213.00

RC.C. Base Slab 3.00 m 3 8,213.00

4) TMT Fe-500 Reinforcement 2.00 MT 77,285.20

5) 20 mm thick Inside Cement Plaster in CM 1 : 3 43.00 m2 180.40

6) FRC machinehole 3.00 No. 2,380.00

7) Refilling 32.00 m3 22.00

8) PVC steps 21.00 No. 87.00

Item Qty. Unit Rate in Rs. Amount in Rs.

9 RCC ESR 10 Lacs. Litre capacity 24 mt. Staging Height

Overhead Tank (ESR-2)

Designing, structurally (and aesthetically) complying Provisions of

relevant lndian standards and constructing 10 Lac litre capacity 24 mt.

staging height RCC Elevated Service Reservoir (RCC M-30 grade

concrete and reinforcement TMT Fe-500) of the below mentioned size

using latest S.B.C. of proposed site, Seismic zone-03, Wind speed Zone.

Including (1) Container shape any suitable type(or as specified). (2)

Staging consisting of column brace trestle / combination column- brace

trestle and shaft as appropriate(or as specified) and (3). This includes

excavation in all types of soil strata(induding hard rock ). casting100

mm thick P C.C. levelling course in M-10 . Refilling the pit with

proper soil and disposing of the surplus stuff at all required lead. (4)

This will also include cement plaster in CM 1:3 with approved water

proofing compound all over inside container (ie. walls, base, top

slab/dome bottom etc. all). (5) Providing and fixing of any

accessories(specified) like MS / GI ladder, Cl Manhole frame and

covers, water level indicator , lightening conductor, Gl Pipe railing

around walk way, at roof level, at gallery and around landing of inside

shaft, Adequate cowl type ventilators or lantern type ventilator with

stainless steel jali. (6) Scope of work includes constructing RCC spiral

staircase with adequate tie beams, staircase footing , ventilating shaft

and ventilators as well as door in shaft, SS grating to be provided to

outlet pipe (Inside container) for safety. (7) including providing and

applying three coats of cement paint/snowcem (as specified) to the whole

structure. (8) It also includes satisfactory water tightness test as per

relevant I.S Code and painting name of scheme & capacity on the tank

as per direction of engineer in charge. (9) It also includes satisfactory

water tightness test as per relavant IS code and painting name of scheme

& capacity on the tank as per direction of Enginner in charge.

List of Indian Standard for design of ESR :

Note : The structural design of ESR shall be in accordance

with provisions of relevant Indian Standards

I.S. 3370 part I & II 2009 or its latest revision (1:1) I.S.

Part III & IV 1965 or its latest revision

IS 456-2000 or its latest revision

IS 11682-1985 or its latest revision

IS 1893-2002 Part I to V or its latest revision

Is 13920-1993 or its latest revision

IS 875 Part I to III, 1987 or its latest revision

IS 11089-1987 or its latest revision

General Specifications :

The Min. concrete grade for RCC shall be M:30. Proportion

of concrete ingredients shall be as per Mix design using weigh

TMT Fe-500 or higher grade reinforcing bars confirming to

IS:1786/1139 or TMT bars shall be used as per detailed

Item Qty. Unit Rate in Rs. Amount in Rs.

In case of column -brace trestle type staging having more than

6 columns internal horizontal bracing is obligatory.

Min. size/ thickness of various components shall be provided

as per design criteria/specifications/IS Code (or as per std.

practice). Capacity of the ESR shall be considered excluding

Minimum dimensions specified for various components in

tender data /specifications should be provided.

The foundation shall be referred from latest SBC test report

or tender datasheet. During execution If poor soil strata or

ground water table is encountered, the SBC shall have to be re

ascertained and the design should be revised accordingly

Maximum spacing between horizontal bracings shall be 5 m

(storey height)

The BB Masonry cabin with MS door shall be constructed

when spiral staircase is outside the staging.

RCC Staircase/ MS Staircase shall be provided and fixed for

access to roof when height of roof from G.L. is up to 10 m. For

ESR having more than 10 m height proper RCC staircase or

suitable RCC spiral staircase shall be constructed. Railing

should be provided through out the staircase and around the

For ESR-having staging height more than 15m the spiral

staircase shall be provided inside the staging with effective

tie beams in more than one direction

Water level indictor shall be provided and fixed float type

/electronic (as specified).

The rate shall include cost of dewatering during execution

making all arrangement with any dewatering technique.

The structure shall be designed properly for uplift due to

Ground water table specified in data or GWT encountered

during execution. No extra payment shall be paid for the same.

Effective curing shall be carried out up to required period as

per specifications.

Agency shall engage quailfied (at least graduate)consulting

engnieer for designing the structure and he/she shall visit the

site for guidance of work at all levels (i.e.below foundation,

up to GL. above GL for all lifts up to container).

Item Qty. Unit Rate in Rs. Amount in Rs.

75% part rate shall be payable for Concrete, Reinforcement

and Plastering items of container until satisfactory hydraulic

testing for watertightness is performed. Or as per tender

condition. Till then the work shall be treated as incomplete.

Above conditions/ general specifications Sr. No. 1 to 16 are

part & parcel of tender (contract)

Capacity of ESRs (shell type container like cylindrical,

conical, intze, folded plates & its combination)

Cost of 10 lacs liter capacity (For Seismic zone-3) 1.00 No. 1,00,88,433.00

10 Providing and fixing flanged D.I.D.F. / Class K-9 pipes

vertically for RCC Reservoir incl. providing clamps at every

mt incl. jointing materials such as nuts, bolts, rubber packing,

hydraulic testing and necessary scaffolding etc. complete.

700 mm dia. Inlet pipes and overflow pipes 70.00 Rmt. 25,369.00

700 mm dia. Outlet pipes 40.00 Rmt. 25,369.00

300 mm dia. Washout pipes 40.00 Rmt. 7,219.00

11 Providing, supply and Delivery of Ductile Iron flanged 'ended

fittings / specials conforming to relevant IS, to 'store or site of

work including freight, loading, 'unloading, stacking all taxes,

insurance and including 'jointing with jointing materials like

'gaskets, nuts and bolts etc. as required for inlet,'outlets,

overflows, washout etc.

Duct foot bends

For 300 mm dia. 156.00 Kg. 155.00

Crippling flanges

For 300 mm dia. 110.00 Kg. 155.00

For 700 mm dia. 304.00 Kg. 158.00

For 300 mm dia. 45.00 Kg. 155.00

12 Providing and supplying of approved make of D.I. / S.G. Iron

double flanged butterfly valve of following class and diameter

confirming to IS 13095-1991 with electric actuator operating

system including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to site, stacking etc. complete. PN-1.0 with gear

operated (PD type short body)

For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 44,652.00

For 300 mm dia. for washout (Sluice valve) 1.00 No. 20,384.00

13 Lowering, laying and jointing in position C.I. / D/F Butterfly

valves, Sluice valves of following dia. including cost of all

labour, jointing material, including nut, bolts and giving

satisfactory hydraulic testing etc, complete.

For 500 mm dia. Inlet & Outlet (BF valve) 2.00 No. 2,905.00

For 300 mm dia. for washout (Sluice valve) 1.00 No. 1,141.00

Item Qty. Unit Rate in Rs. Amount in Rs.

14 Providing and supplying CI/DI Temper proof Air valves with

SS 304 Float gun metal nozzle of approved make & quality of

following class and diameter including all taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to site, stacking etc.

complete.With Isolating Sluice Valve PN

With Isolating Sluice Valve PN

15 Lowering, laying & jointing in position following air Valves

including cost of all labour, jointing material, including nut

bolts & giving satisfactory hydraulic testing, etc. complete.

16 Construction of chambers in RCC M30 with TMT Fe-500

reinforcement, PCC150 mm thick in M 15 ,20 mm thick inside

cement plaster in C.M.1:3 with OPC cementand depth of

chamber from G.L. to pipe invert level including complete

civil works and inclusive of the cost of of excavation, refilling

and PVC foot steps including providing RCC Slab in one

single piece with fixing of FRC (heavy duty) manhole frame

and cover or RCC 1:2:4 Precast slab in parts with key hole etc.

RC.C. Top Slab 3.00 m3 8,213.00

RC.C. Base Slab 3.00 m 3 8,213.00

TMT Fe-500 Reinforcement 2.00 MT 77,285.20

20 mm thick Inside Cement Plaster in CM 1 : 3 43.00 m2 180.40

FRC machinehole 3.00 No. 2,380.00

Refilling 32.00 m3 22.00

PVC steps 21.00 No. 87.00

PROVIDING AND LAYING WATER DISTRIBUTION NETWORK IN TP- 28 AND 29 PART-I

SCHEME OF GMC AREA

01 Excavation for pipe line trenches distribution network, valve

chambers for all required gradient and line including safety

provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc. complete

for all lifts and strata as specified.

In all sort of soils and soft murrum

1.5 to 3 mt. Depth 60.00 m3 98.00

Item Qty. Unit Rate in Rs. Amount in Rs.

02 Providing and supplying DI K-9 grade pipe with EPDM gasket

for following nominal bore diameter with internal cement

mortar lining including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to site, stacking etc. complete. (IS 8329-2000).

100 mm dia. DI pipe (K-9) 43170.00 Rmt 1,127.00

150 mm dia. DI pipe (K-9) 310.00 Rmt 1,655.00

200 mm dia. DI pipe (K-9) 12340.00 Rmt 2,239.00

250 mm dia. DI pipe (K-9) 18565.00 Rmt 2,998.00

300 mm dia. DI pipe (K-9) 2550.00 Rmt 3,788.00

400 mm dia. DI pipe (K-9) 580.00 Rmt 5,586.00

450 mm dia. DI pipe (K-9) 215.00 Rmt 6,673.00

500 mm dia. DI pipe (K-9) 270.00 Rmt 7,909.00

Item Qty. Unit Rate in Rs. Amount in Rs.

03 Lowering, laying and jointing DI Pipes of various classes with

specials of following diameters in proper position grade and

alignment as directed by Engineer in charge.

100 mm dia. DI pipe (K-9) 43170.00 Rmt 55.00

150 mm dia. DI pipe (K-9) 310.00 Rmt 76.00

200 mm dia. DI pipe (K-9) 12340.00 Rmt 99.00

250 mm dia. DI pipe (K-9) 18565.00 Rmt 127.00

300 mm dia. DI pipe (K-9) 2550.00 Rmt 155.00

400 mm dia. DI pipe (K-9) 580.00 Rmt 225.00

450 mm dia. DI pipe (K-9) 215.00 Rmt 265.00

500 mm dia. DI pipe (K-9) 270.00 Rmt 312.00

04 D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron

flanged Socket Spigot Bends, tees,reducers or any other

specials as per BS-EN-545/1995 Class-A series K12 suitable

for use with D.I Pipes manufactured as per IS:8329/1994

delivery of specials to site of works any where in Gujarat

including fixing, all taxes, loading, unloading, carting,

stacking,insurance, inspection charges, octroi etc. complete.

For 100 to 300 mm dia 57614.00 Kg 148.00

Above 300 mm dia 2706.00 Kg 151.00

05 Providing and laying cement concrete M20 for thrust block 791.00 m3 4,422.47

and encasing including formwork but excluding the cost of

reinforcement with curing etc. complete, as directed.

06 Labour charges for making hole below road surface at 200.00 Rmt. 641.35

required of required size with hand tools including refiling

after completion of laying and testing of pipe line below

mm dia. of pipe.

07 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 24.00 MT 77,285.20

C. work including bending, binding and placing in position

complete upto floor two level.

08 Providing and laying cement concrete 1:2:4 (1 cement : 2 2.00 m3 3,758.19

coarse Sand :4 Graded stone aggregate 20 mm nominal size)

and curing etc. complete excluding cost of form work.

09 Providing,supplying ,fixing ISI mark Ductile Iron D/F

manually gear operated SLUICE VALVE including taxes,

insurance, transportation, fright charges, Octroi Inspection,

charges, loading , unloading, conveyance to site stacking, etc.

complete valve with ISI mark only

PN 1.0 with hand wheel /cap operated (PD Type Short body)

Item Qty. Unit Rate in Rs. Amount in Rs.

10 Providing and supplying CI/DI Tamper proof /Bi Stream Air

valves with SS 304 Float gun metal nozzle of approved make

& quality of following class and diameter including all taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores,

stacking etc. complete.

With isolating sluice valve PN

11 Lowering, laying & jointing in position following air Valves 2.00 No. 526.00

including cost of all labour, jointing material, including nut

bolts & giving satisfactory hydraulic testing, etc. complete.

With Isolating Sluice Valve PN

12 Refilling the pipeline trenches including ramming, watering, 79073.00 m3 22.00

consolidating disposal of surplus stuff as directed within a

radium of 3 Km.

13 Extra rate over item of excavation of earth for excavation of

asphalt pavement/RCC of thickness upto 0.30 meter including

demolishing the asphalt carpet, metal, soiling/cutting

Reinforcement etc. comp. with stacking the material as

up to 0.30 meter (By any type of Breaker Machine or R.C.C 1489.00 Smt 200.00

Cutter machine including cost of operator, fuel &

transportation etc complete.

14 Reinstatement of Bituminous road including with 40 mm thick 1489.00 Smt 1,945.00

Bituminous Concrete using 5.4 % Asphalt ,50 mm thick DBM

using 4.5 % Asphalt with tack coat using RS 1 emulsion @

2.5 Kg/Sqm , with Tack coat using RS 1 emulsion @

Kg/Sqm, Prime coat with SS 1 emulsion @ 7.5 kg/Sqm,250

mm thick WMM , 200 mm thick GSB V loosening and

recompacting ground as per respective MoRTH specification

and as directed by engineer in charge.

15 Construction of chambers in brick masonary, locally available

in C.M. 1 : 6, foundation concrete 150 mm thick in C.C. 1:4:8

of trap metal size 25 mm to 40 mm thick, inside cement plaster

in C.M. 1:3 and cement pointing outside in C. M. 1 :3 & top

cover of precast RCC slab 100 mm thick upto 1 mt. depth

from G.L. but excl. cost of excavation and refilling. With cast

in situ RCC slab in two piece with fixing FRC frame and

cover etc. complete(excluding cost of frame & cover ) with

mm thick brick masonary wall in C.M.1:6

(1) For Sluice Valve & Air Valve

a).0.9 x 0.9 mt. and 1.0 mt. deep chamber 34.00 No. 7,738.00

b) for 1 m. extra depth 15.00 Rmt. 4,479.00

a).1.3 x 1.3 mt. and 1.0 mt. deep chamber 16.00 No. 11,351.00

b) for 1 m. extra depth 14.00 Rmt. 6,084.00

Item Qty. Unit Rate in Rs. Amount in Rs.

16 Providing F.R.C. MH seat cover incl. carting to the work site 52.00 No. 2,380.00

etc. comp. Directed. F.R.C. Extra Heavy Duty (EHD-35)

machinehole Covers & Frames Cover: 728mmø & 100 mm

thick circular cover, 35.00MT load design,100 x 2mm MS flat

all round,16mm øplain round bar for lifting the cover & should

be fitted with plastic cups. Frame:560mm ø clear opening, -

888 x 888 x 175mm. On the upper periphery off rame 25x3

mm wide MS flat should be well embed in concrete to protect

the edges off rame. FRCE.H.D.-35 machinehole cover &

frame described as above.

17 Demolition and disposal of unserviceable materials with all

i) Unreinforcement Cement Concrete 100.00 m3 639.72

18 Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift

19 Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift

i) In Cement Mortar 100.00 m3 577.92

20 Drilling of 900mm dia Horizontal borehole for watermain

pipeline crossing under the road incl in all strata with

required length incl fixing of 800 mm dia M.S casing pipe

with pushing etc complete for 200 & 250 mm dia. DIK-9 Pipe.

Without Water main & with M.S casing pipe 800 mm dia. 798.00 Rmt. 22,359.00

12 mm plate thickness MS Casing Pipe

CONSTRUCTION OF COMPOUND WALL AT PROPOSED WATER DISTRIBUTION

STATION IN TP-28, 29 OF GMC AREA

01 'Excavation for foundation for loose and soft soil including

sorting out and stacking of useful materials and disposing of

the excavated stuff up to 50 meter lead.

02 'Providing and laying cement concrete 1:2:4 ( 1 cement : 2 13.00Cu.m. 3,758.19

coarse Sand :4 Graded stone aggregate 20 mm nominal size)

and curing etc. complete excluding cost of form work.

Item Qty. Unit Rate in Rs. Amount in Rs.

03 Providing and casting in situ C.C. in grade M-25 (proportions)

as per mix design or as per table 9 of IS456 2000 in masses by

weigh batching) using granite, quartzite trap metal of size

mm to 20 mm for RCC and or 6 mm to 12 mm including

scaffolding centering, formwork, needle vibrated

consolidation, curing complete up to 6 meter depth or height

(excluding cost of reinforcement and neat finishing) with

centering and shuttering etc. complete for all water retaining

a) RCC Footing 16.00Cu.m. 8,077.00

b) RCC column 12.00Cu.m. 9,195.00

c) RCC coping 5.00Cu.m. 8,077.00

d) RCC Beam 13.00Cu.m. 8,347.00

04 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. 6.00 MT 77,285.20

C. work including bending, binding and placing in position

complete upto floor two level.

05 Brick work using common burnt clay building bricks aving 34.00Cu.m. 4,502.81

crushing strength not less than 35 kg / Sq. Cm. in

superstructure above plinth in cement mortar 1:6 (1 cement :

coarse sand) etc. complete for walls, parapets etc. at two

06 20 mm thick sand faced cement plaster on walls upto height 176.00 m2 315.69

10 metres above ground level consisting of 12 mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8 mm thick

finishing coat of C.M. 1:1 (1-cement : 1 sand) etc. complete.

07 Providing 15 mm thick cement plaster in single coat on Rough 176.00 m2 185.41

(Similar) side of single or half brick walls finished even and

smooth in (i) Cement mortar 1:3 (1-cement : 3 sand).

08 'Providing in line level plumb, fabricating and fixing three row 80.00 Rmt. 478.00

horizontal barbed wire fencing and punched tape concertina

coil of 9 turns per meter of 610 mm diameter fixed with clips

on top of the angle iron posts. The punched tape concertina

coil having sharp barbs at every 25 mm spacing shall be

mm thick and 19 mm width and weighing 13 kg/ 100 mtr.

(Average) as per manufacture's specification. the rate shall

also include providing and fixed 1.20 mt total long MS angle

40 x 40 x 6mm @ 3.00 mt c/c spacing embedded in RCC

column, angle posts shall be painted with one coats of red

oxide and two coats of enamel paint of approved quality at top

of compound wall.

09 Wall painting (two coats) with plastic emulsion paint of 352.00 m2 83.18

approved brand and manufacture on undecorated wall surface

to give an even shade including thoroughly brushing the

surface from mortar droppings and other foreign matter and

sand papered smooth.

Item Qty. Unit Rate in Rs. Amount in Rs.

10 Manufacturing, supplying, lowering, laying and jointing 150 8.00 Rmt. 364.00

mm dia RCC NP2 Pipe of 0.3 m long as per IS-458

specification for compound wall and fixing as per directed by

Engineer-in-charge.

11 Earthwork in embankment including breaking clods, dressing 1144.00 m

with all lead and lift including rolling of earthwork in layers

including filling in depression, including water of earth as

directed (from borrow area within 3 km lead).

12 Construction of 250 mm thick un-reinforced plain cement 900.00 Smt 1,870.00

concrete pavement with M - 40 grade of concrete including

provision of contraction, construction and longitudinal joints,

joint filler, , sealant primer, joint sealant, finishing to lines and

grades as per drawing as per MoRTH clause 602 over a

mm thick DLC with necessary excavation/loosening and

recompacting ground as per respective MoRTH specification

and as directed by engineerin charge

13 Fabricating and fixing in position MS structural section such

as flat, pipes, plates, hold fast, anchoring bolts / bars of

required size including fixing, welding and two coats of

approved anti corrosive paint over prime coat of red-oxide

including RCC gate column as per drawing etc. complete as

directed by Engineer-in-charge.

a) 2.2 m height and 6 m wide main and wicket gate 650 Kg. 88.38

14 Labour charges for writing of capital letter "GMC" in green 27.00 No 277.00

plaster of 30 cm height, 25 mm thick & 12 mm embossed as

per given detail in outside of compound wall as instructed by

Engineer in charge.

15 Providing and fixing pre-cast Rubber Dye / steel Dye inter 2859.00 Smt 706.90

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018

OPERATION & MAINTENANCE WORK

Item Qty. Unit Rate in Rs. Amount in Rs.

1.1.1 During First Year 12 Months 82,945.00

The works of this schedule comprises of the supply of all spare parts

as required including the supply of all labour (including reliever to

ensure presence of specified type and no. of manpower per shift),

materials, consumables (except electrical power), equipment, tools

and tackles and comprehensive operations and maintenance of the

WATER DISTRIBUTION STATION during the O & M period

from the date of successful commissioning.

Total staff salary for O&M period (of 24 months) for Operation,

security, repairing and maintenance for the complete O&M period

a) Pump operator cum SCADA operator (ITI-Wireman/Eletrician) (3

nos - One for each shift of 8 hrs.)

b) Instru. Techanician for WDS & Dist. Network (ITI-Instru.)

(at General shift of 8 hrs.)

1.1.2 Total of Manpower for Second Year 12 Months 91,240.00

1.2.1 Security cum helper-(10th-of age < 45 years) (3 nos. - One for each 12 Months 55,389.00

shift of 8 hrs.)

1.2.2 Total of Manpower for Second Year 12 Months 60,928.00

Comprehensive Maintenance

2.1.1 Comprehensive repairing, spares and maintenance of entire works 12 Month 24,800.00

alongwith administration & management charges including running

office, cost of lubricants, consumables, spares, tools,statutory

periodical approvals & testing of eqipments etc. required in all except

supply of ele. power and sewage during O&M period (for First Year

(Covered under Defect Liablity Period for First Year and

consumables @0.5% of EMI cost)

2.1.2 Total of Comprehensive Maintenance for Second Year (0.75% for 12 Months 68,196.58

spare + 0.5% for consumables)

3.1.1 Other Expenses

a) 100 mbps Leaseline with Static IP expense for SCADA System 24 Month 800.00

at WDS including renewal fees, license charges and any other

charges as applicable for remote data received at WDS SCADA

from distribution network.

b) Monthly charges for SIM card for data received from ESR & 24 Month 2,500.00

Distribution Network to WDS SCADA and SMS to concern

c) 900 kg Chlorine Tonners - loading, unloading, to & fro 24 Months 5,802.00

transportaiton to site etc. as applicable.

Grand Total Rs. (A+B+C+D+E+F+G+H+I+J+K+L)

Grand Total Rs. (A+B+C+D+E+F+G+H+I+J+K+L)

Item Qty. Unit Rate in Rs. Amount in Rs.

I/We am/are willing to carry out the work at ________% above/below percent (should be written in figures and words) of the

estimated rate mentioned above. Amount of my / our tender works out as under .

Estimated amount put to tender Estimated amount put to tender

Deduct____% below Add____% Above

In words In words

1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as

2 All columns in the Schedule should be filled in ink and the total of the entire in the last columns should be struck by

the contractor under his signature.

3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for

work under all conditions, site, moisture, weather etc.

4 To be continued on additional sheets, if found necessary.

5 The Labour Cess will be deducted as per prevailing rules i.e.1% of the work done.

6 GST is applicable seperatly for all type of works by the Client (Total Tender Cost is without GST).

7 The bituminous work shall be carried out by the contractor or as under by utilizing.

8 For abnormal high or law rates payment of such items shall be regulated as per Govt. Circular letter No. Parach-

102008-61-S dated 27-11-2008 attached with tender papers.

9 From dt. 1-7-2017 GST is applicable hence Agency should quote price accoringly. Any dispute regarding this will not

be considered by GMC.

10 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

11 GST and Income tax TDS will be deducted at a source while making payments of bills.

12 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item

at the rate of input rate mentioned in SOR used for preparation of Estimate.

Signature of Contractor

The Deputy Commissioner

Gandhinagar Municipal Corporation (GMC),