Loading
Loading…
Loading…
Tender Value
₹1.1 L
EMD Value
₹2,200
Closing Date
29 Aug 2026, 4:00 pm5d left
ASSISTANT ENGINEER
AE/EMSD-III, PHE DTE, DHUBULIA
Repairing of 280 KW soft Starter Panel by supplying of different spare parts including allied works at WTP of Nakashipara (Part-II ) SWB W/S project under EMSD-III, PHE dte.(SM/00874)
2026_PHED_1030466_6
WBPHED/AE/EMSD-3/NIET-01/26-27
Open Tender
MECHANICAL
Percentage
15 days
NAKASHIPARA
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,200
Yes
17 Aug 2026
17 Aug 2026
31 Aug 2026
17 Aug 2026
29 Aug 2026
19 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.0 | After thorough inspection,testing and fault finding in 1 no soft starter panel (280 KW) ( Soft Starter no-2),disconnecting the power line and taken out all the damaged and non-functional electrical and electronices components and wiring materials by supplying the necessarry testing tools and tackles as per direction of EIC. | - | ls | - | - |
| 0.0 | S & D of 225 A,3 Pole,2NO+ 2NC ,Power contactor , (MNX 225, make-L & K as per existing sample or as per approved vendor list)(for Panel-2) | - | each | - | - |
| 0.0 | Installation and fixing the above supplied materials in the above 1 no. panel with proper internal connection,overhauling and supplying of necessary materials viz. hardware ,jointing materials,cable etc., and complete the job in all respect.Testing and commissioning the entire installation as per direction of EIC. (This cost including hiring and Carring charges of all the testing equipments,tools and plants.) | - | ls | - | - |
| 0.0 | Supplying and fixing compression type gland complete with brass
gland, brass ring & rubber ring for dust & moisture-proof entry of
XLPE/PVC armoured cables as below : i)3 core,upto 70 sqmm. ( for Pump 2) | - | each | - | - |
| 0.0 | Finishing the end of following XLPE/PVC armoured cables by
crimping method incl. supplying and fixing solderless socket
(Dowels make), tapes, anticorrosive paste & jointing materials i)3½ core 300 sqmm cable . ( for Pump 2) | - | /set | - | - |
| 0.0 | Repairing and limit setting of the existing actuator for operation of 400 mm dia butterfly for Pump-2 by engaging skilled technician and laboure by supplying necessary hardware and wiring materials. | - | ls | - | - |
| 0.0 | Supply and delivery of 150 mm dia,0-16 kg cm2 glycerine filled diaphragm seal type pressure gauges with Siphon tube, impulse pipe, three way cock.( For P/No-I,II,III) | - | each | - | - |
| 0.0 | Fitting and fixing the above supplied Pressure gauge and dismantling the old one by engaging the skilled manpower and necessary hardware as per direction of EIC. | - | ls | - | - |
| 9 | Add : 18% GST | - | LS | 1 | - |
| 10 | Add : 1% Cess | - | LS | 1 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.59 MB
Tendernotice_2.pdf
PDF • 0.55 MB
BOQ_2549217.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].