SPECIAL REPAIR TO BLDG NO P129 JCOS MD ACCN OF 7012 EME BN AT LANCER LINE AND CERTAIN SANCTIONED WORKS UNDER AOR OF AGE BR I OF GE A CENTRAL JODHPUR (8921/E8)

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) ,complete all as specified and as directed.

PCC 1:4:8 type (D-2 using 40 mm graded stone aggregate) as in flooring,path , sub foundation etc ,complete all as specified and as directed.

50mm thick PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in plinth protection or similar work, without using extra cement ,complete all as specified and as directed.

Machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of ante abrasive rebrised material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sandf . The compressive strength of layer shall not be less than 350 Kg/Cm2 ,complete all as specified and as directed.

Machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (using 20mm stone agg) ,complete all as specified and as directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as as directed.

Cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 ,complete all as specified and as directed.

Squared rubble stone walling Jodhpur type regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6 ,complete all as specified and as directed.

All as per item No 8 above but except stone complate all as specified and directed.

PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) ,complete all as specified and as directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing ,complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises ,complete all as specified and as directed.

20mm thick cement concrete1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

15mm thick screed bed or bedding layer in CM 1:4 floor finished even & rough to recievr tiling/floor finish,complete all as specified and as directed.

Non-skid coloured ceremic tiles (ist quality ) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6,complete all as specified and as directed.

All as per item No 15 above but skirting/dado,complete all as specified and as directed.

Non skid ceramic colour joint free tiles (ist quality ) 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed.

Glazed colour ceramic tiles (ist quality ) of size 300x450x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles ,complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar ,complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed ,complete all as specified and as directed.

18 to 20 mm thick granite(approved quality by user ) in WHB counter top etc laid in dry bedded in pinning to wall including cutting rubbing grinding and polishing to edges and rounding off granite polish slab for smooth finish,complete all as specified and as directed.

18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing ,complete all as specified and as directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc ,complete all as specified and as directed.

10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc ,complete all as specified and as directed.

Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth ,complete all as specified and as directed.

Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth ,complete all as specified and as directed.

15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface ,complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and as directed.

Preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper ,complete all as specified and as directed.

Material and labour for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putti on plastered surface ,complete all as specified and as directed.

Three coats of white wash on newly plastered surface of wall including preparation of serfaces ,complete all as specified and as directed.

Three coats of white wash on newly plastered surface of ceiling including preparation of surfaces ,complete all as specified and as directed.

One coats of white wash on old surface of wall including preparation of surfaces ,complete all as specified and as directed.

One coat of white wash on old surface of ceiling including preparation of surfaces ,complete all as specified and as directed.

Two coats of cement based paint on newly plastered/ unplastered surface of wall over one coat of chalk white including preparationof surface ,complete all as specified and as directed.

One coat of cement base paint on old surfaces including preparation ,complete all as specified and as directed.

Applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each complete all as directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each complete all as directed.

Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ,complete all as specified and as directed.

Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ,complete all as specified and as directed.

Mild steel framed work as in brackets etc for coller stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed .

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

Mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or fe 310-0

Fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.

35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a) and as directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

35mm thick factory made partly glazed and partly skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc ,complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

Solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube ,complete all as specified and as directed.

Taking down steel window/ventilator completeall as directed.

Box type Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete with or without cooler opening all as specified incl repair to jams etc complete all as directed by the Engineer-in-Charge

Box type Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars complete with or without cooler opening all as specified and as directed incl to jams etc complete all asdirected by the Engineer-in-Charge

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded all as specified.

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded all as specified.

Repair to steel window including taking down, replacement of unserviceable hinging devive box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs good in CM 1:4 complete all as directed of Engr in charge setesfacation.

Aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

Aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

Aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

Stainless steel butt hinges 100 mm size complete all as specified and directed.

Mild steel butt hinges 100 mm size complete all as specified and directed.

100mm size single action door spring hinge complete all as specified and directed.

Floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and directed.

4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty ,complete all as specified and directed.

3 mm thick plain glass ordinary quality & glazing complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm ,complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed.

PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in hold fast iron fixing including necessary form work ,complete all as specified and as directed.

Flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item ,complete all as specified and as directed.

CP stainless steel 25mm curtain rod with fixing brackets, knob etc as in repairs complete all as specified and directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms),complete all as specified and as directed.

Soap dish of PTMT fixed with screws complete all as specified and directed.

PTMT towel rail 450mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed.

MS chromium plated peg set of five fixing with wall complete all as specified and directed.

Stainless steel sink,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm complete all as specified & directed.Make :-Blue-star/Nirali/Jayana

Vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed. Make: Parryware/Hindware

Vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover complete incl fixing of flush pipe etc complete all as specified and directed. Make Parryware/Hindware

Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste pipe, MS brackets complete all as specified and directed.Make Parryware/Hindware

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

100 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

75 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

100mm CI bends any radius complete all as specified and directed

75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.

100mm dia CI vent cowl fixed to pipe complete all as specified and directed.

75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia

Chromium plated shower rose 50mm dia round shape complete all as specified and directed. Make : Jaquar /Cera/Hindware

Chromium plated 15mm dia pillar cock long neck with aerator complete Make : Jaquar /Cera/Hindware

25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

15 mm dia angular stop cock with chromium plated long thread with flange complete Make : Jaquar /Cera/Hindware

15 mm dia two way angular stop cock with chromium plated long thread with flange complete Make : Jaquar /Cera/Hindware

Bidet spray (Health faucet) with 1 meter PVC tube and holder, completed. Make : Jaquar /Cera/Hindware

15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified Make : Jaquar /Cera/Hindware

15 mm dia bib, cock long body with flange with chromium plated fixed with iron pipe complete all as specified and directed. Make : Jaquar /Cera/Hindware

Low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete. Make Parryware/Hindware

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store all as specified.

Rotational moulded polythene water storage tanks triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I of capacity 500 ltrs including tank lid cover complete with fixing arrangement complete all as specified and directed.Make :- Sintex/Star

Disconnecting of old serviceable PVC tank setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank complete all as directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ,complete all as specified and directed.

Stainless steel Plate Racks of size 750X 600 X 200 mm thick complete.

50mm thick PCC 1:2:4Type B-1 (using 20 mm graded crushed stone aggregate for water tank ,plinth all as specified and as directed.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise,complete all as specified and directed.

Providing precast RCC using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6,complete all as specified and directed.

Sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm complete

Supply only Integral water proofing compund ISI Marked.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

Steel water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed.

From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete.

RCC M-25 design mix (using 20 mm graded crushed stone aggregate) as in slab supported on wall, roof slab, chajja and in shelve etc ,complete all as specified and directed.

RCC M-25 designl Mix (using 20 mm graded crushed stone aggregate) as in beam, roof beam, cantilevers, lintel beam, etc. complete all as specifed and as directed.

Mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 2.25Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm

Excavation in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surfaces in any type of soil complete all as specified and directed.

Plain cement concrete1:2:4 Type B1 using 20mm graded aggregate as in post holes etc complete

Supply only chain link MS galvanised fencing of size mesh 50mm x 50mm complete all as specified and directed.

Fixing only chain link MS galvaniced fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc including peovission of binding wire complete all as specified and directed.

Angle iron frame work for fencing post conforming to fe 410-O or 310-O or as in door or gates ornamental type of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to br prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Taing down existing old tar-felt from RCC roof, stone roof in any thicnes etc carefully inlcuding cleaning the roof surface by wire/coir brush and remouving all grits, stones fungus, moss and finally washing down with water to the entire satisfaction of Engr-in-Charge.

PCC (1:3:6) type B-0 (using 12.5mm graded crushed stone aggegate) as in roof padding, filling depression, junction of roof slab & parapets, curbs etc including necessary from work complete all as specified and as directed

Mild steel bolts machine made 10mm dia of neck hexagonal or square head at one end and screwed the other or screwd both ends each screwed end to be fitted with washers and one hexagonal or square exceeding 3 cm but not exceeding 5cm long complete all as specified and directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

(e) One bell point controlled by one bell push.

All as per item No 136 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

Switch flush type single pole one way 6 Amp ISI Marked

Switch flush type single pole one way 16 Amp ISI Marked.

Socket out let , 5 pin , 6 Amp piano type.

Socket out let , 3 pin ,16 Amp piano type.

Bell Push flush type , SP, 5/6 amps ISI Marked.

Bell AC 230V , SP , ISI Marked.

Socket stepped type electonic fan regulator flush type , ISI Marked.

Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Make :Crompton Fitting Cat No-DMLN1LTD8-16 & LED Lamp Cat No-LTT8-20 or equivalent in Havells Cat No LHEXBHP7PN1W020 /philips Cat part No-BN150W LED20S complete all as specified.

Insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 7 watt LED Lamps ISI Marked.

Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS SPN 8 way,-Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

MCB SPN 63 Amp, 10 kA, ISI Marked.

Taking down serviceable/Unserviceable , existing Electric Meter Any Capacity and Refixing in same position after completion of B/R work NOTE : The rates are deemed to be included for providing suitable electric connection at incoming and out going - 4 Nos).

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Supply and laying of cable XLPE insulated screened meter PVC bedded gal vanized steel strip or wire armored , electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16sq mm 4 core.Make: polycab./Havells/Finolex

Note for all above items:All above items are for M&L /S&F and to be executed in "Repair i. e taking down old materials unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly.

M/S KAUTILYA GARG

mahalaxmi enterprises

Nikhat nirman

KARNI CONSTRUCTION COMPANY

Shri Maruti Trading Co.

Jai Doulat Construction Co

BEYLIM INFRA