Loading…
Loading…
Tender Value
₹3.3 L
EMD Value
₹3,300
Closing Date
22 Jul 2026, 6:00 pm
Chief Officer, Halvad Nagarpalika
Construction Work of Store Room At. Parajapati Samaj Smashan, At. Halvad, Dist.: Morbi Under MLA Grant Year-2025-26
320542
Halvad/NP/2026/July/03
Open
Civil Works
Morbi
1 document required · 1 mandatory
₹900
The Chief Officer, Halvad Nagarpalika
₹3,300
4 Jul 2026
4 Jul 2026
4 Jul 2026
22 Jul 2026
4 Jul 2026
NAME OF WORK :- CONSTRUCTION WORK OF STORE ROOM
LOCATION :- PRAJAPATI SAMAJ SMASHAN @HALVAD
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Excavation for foundation up to 1.5 mt. depth including sorting out
and stacking of useful materials and disposing of the excavated
stuff up to all lift and lead all Strata. 12.00 157.32 Cumt.
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse
sand : 6 Machine Cut stone aggregate 40mm nominal size ) and
curring complete including cost of formwork in (a) Foundation and 2.00 3095.24 Cumt.
Uncoursed rubble masonary with hard stone of approved quality in
foundation and plinth in cement mortar 1:6 (1 cement, :6 coarse
sand) Including levelling up etc.complete. 14.00 2586.61 Cumt.
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse
sand : 6- crushed stone aggregates 20 mm nominal size) and curing
complete including cost of formwork in (A) Wall Caps / Coping. 2.00 4130.19 Cumt.
Filling available excavated earth (excluding rock) in
trenches. plinth, sides of foundations etc. in layers not exceeding
20 cm. in depth consolidating each disposited layer by
ramming and watering. 6.00 136.91 Cumt.
Filling in plinth with sand under floors including watering ramming,
consolidating and dressing complete. 2.00 481.80 Cumt.
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse
sand : 4- graded stone aggregates 20 mm nominal size) and curing
complete including cost of formwork in (A) Foundation and Plinth. 2.00 3784.74 Cumt.
Brick work using common burnt clay building brick having crushing
strength not less than 35 Kg/Sqcm. in cement mortar 1:6 (1 cement
: 6 fine sand) for brick work in above plinth level up to floor two
level. (B) Conventional. 13.00 4496.04 Cumt.
Providing and laying ordinary cement concrete 1:2:4 (1 cement :2
coarse sand 4 graded stone aggregate20mm nominal size) and
finishing smooth with curing etc. complete including the cost of form
work but excluding the cost of reinforcment for R.C.C. work in (i) 4.00 6888.15 Cumt.
Providing and laying cement concrete 1:2:4 (1- cement : 2- coarse
sand : 4- graded stone aggregates 20 mm. Nominal size) for
reinforced concrete chajjas not exceeding 10 cm. thickness up to
floor two level including finishing the exposed surfaces with cement
mortar 1:3 (1cement :3 fine sand) to give a smooth surface centring
and form work and curing complete excluding cost of reinforcement. 1.00 6672.73 Cumt.
Providing 15 mm thick cement plaster single coat on brick /
concrete wall for interior plastering up to floor two level finished
even and smooth in (i) Cement mortar 1:3 (1 cement : 3 sand). 61.00 180.39 Sqmt
20mm thick sand faced cement plaster on walls up to height
10meter above ground level consisting of 12mm thick backing coat
of cement Mortar 1:3 (1 cement :3 Sand) and 8mm thick finishing
coat of cement Mortar 1:1 (1 cement :1 Sand) etc. complete. 94.00 315.68 Sqmt
Providing and laying white glzed tiles 6mm thick in skirting, riser of
steps and dedo on 10mm thick cement plaster 1:3 (1 cement :3
coarse sand) pointing in white cement and jointed with white cement 18.00 1127.48 Sqmt.
Providing and laying white glazed tiles 6mm thick in flooring, trade
of steps and landing laid on a Bed of 12mm thick cement plaster 1:3
(1 cement :3 coarse sand) finishing with flush pointing in white 16.00 963.11 Sqmt.
Providing TMT Bar FE 500D reinforcement for R.C.C. work
including bending, binding and placing in position complete upto 511.00 77.28 Kg.
Item No. level.
Wall painting (two coats) with plastic emulsion paint of approved
brand and manufacture on wall surfaces to give an even shade
including throughly brushing the surface free from mortar droppings
and other foreign matter and sand papered smooth. 61.00 84.36 Sqmt.
Finishing Wall with wether proof Exterior Emulsion paint on Wall
Surface (Two Coats) to give an reuired shape even shade after
thoroguhly brushing the surface to remove all dirt, and remains of
loose powdered materials of loose powdered materials Etc. 94.00 120.26 Sqmt
Providing and fixing G.I. Rain water Spout of 50MM dia and 30Cm.
Length. 4.00 101.90 No.
Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multistrand copper wires, in following type of pipe to be
erected concealed in/ on surface on wall/ceiling complete with 6A
Modular type switch/bell push & accessories and earth continuity of
following type, erected on PVC/Metallic box, single mounting base
frame covered with textured/metallic front plate modules erected
on/in wall/ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose/ H.D.Connector as directed. (a) with medium
class Rigid PVC pipe and accessories (Cat. I- Anchor, SG, Elleys) 10.00 349.46 No.
Providing and fixing 30mm thick FACTORY MADE SOLID PANEL
PVC DOOR SHUTTER consisting of frame made out of M.S. tubes
of 19 gauge thickness and size of 19mm x 19mm for stiles and
15mm x 15 mm for top and bottom rails. M.S. frame shall have a
coat of steel primers of approved make and manufacture, M.S.
frame shall be covered with 5 mm thick heat moulded PVC ‘C’
channel of size 30 x 50 mm forming stiles, and 5mm thick 75mm
wide PVC sheets for top rail, lock rail and bottom rail on either side,
and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap
insert for top rail and bottom rail, Panelling of 5 stiles and rails with
30mm wide x 5mm thick PVC sheet beading on eighter side, and
joined together with solvent cement adhesive,. An additional 5mm
thick PVC strip of 20mm width is to be stculk on the interior side of
the ‘c’ channel using PVC solvent cement adhesive etc. complete
as per direction of Engineer in charge, manufacture’s specification 2.00 1146.37 Sqmt.
Providing and fixing window having extruded aluminum Colour
anodized section frame main outer size 63.50 x 38.10 x 1.95 mm(of
Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track
member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no:
8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x
31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659
Kg/mt) with sliding shutters of horizontal member size 40mm x
18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),
vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section
no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt)
with 5 mm thick transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc complete for window. 5.76 1713.69 Sqmt.
Providing and laying Marble stone /Granite slab flooring over 20mm
(average) base of cement mortar 1:6 (1-cement : 6-coarse sand) or
L.M. 1:1.5 (1- lime putty : 1.5 - coarse sand) laid and jointed with
grey cement slurry including rubbing and polishing complete. (A)
Marble slab/Granite 25mm thick. 12.00 2194.76 Sqmt.
Total Amounts Rs…
Total Amounts Rs…
Say Amounts Rs…
I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be writen in
figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.
Estimated Amount Estimated Amount
Put to Tender Rs. 3,29,306=00 Put to Tender Rs. 3,29,306=00
Add ..............% Rs. Deduct %Rs.
Total Rs. Total Rs.
(In Words (In Words
Stamp with Signature of Contractor
Municipal Engineer Chief Officer President
Halvad Nagarpalika Halvad Nagarpalika Halvad Nagarpalika
Halvad Halvad Halvad
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 Tender.pdf
02 Form B-1.pdf
03 Schedule B.pdf
04 Location and Section Store Room.pdf
05 Terms and Conditions.pdf
06 Specifications of Building Work.pdf
07 Specifications of Electrical Work.pdf
08 Vendor Civil and LED work.pdf
9 Test Require For Construction Material.pdf
10 GR All.pdf
10.1 DMO_2876_01-May-2025_273.pdf
11 GR Affidavit GR_240217_161336.pdf
Download all tender documents and submit your bid