Providing LWSS Behna Khad to Belidhar Sanarli and Gowalpur Teban Sarahan in Tehsil Karsog Distt Mandi HP

Amount

Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work with in all lead and lift .

Providing and laying cement concrete 1:6:12 ( 1cement:6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth with in all lead and lift . .

Random rubble masonary / Polygonal rubble masonary (coursed or brought to courses with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 in cement mortar 1:6 (1 cement : 6 sand)with in all lead and lift .

Brick work using common burunt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement : 6 sand)with in all lead and lift .

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jump lock jamb, beed and if required angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5 mm thick with gaurds, lock strike plate and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge.with in all lead and lift .

Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. 2nd class deodar wood with in all lead and lift . .

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring shuttering ,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ reinforced concrete and plain concrete work with in all lead and lift . in:-

Foundation,footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect.

Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness.

Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth.

Vertical surfaces such as walls (any thickness), partitions and the like including attached pillasters, buttress,plinthand string courses and the like.

Providing form work of ordinary timber plank so as to give a rough finish including centering shuttering and propping etc. and centring below supporting and centring flooring to ciling not exceeding 4 mtrs and removal of the same fro instue reinforecd concrete and plain concrete work in :-

Arch dome valuts up to all span in all lead and lift .

Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement with in all lead and lift . in:-

Foundation,footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level with in all lead and lift . .

Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1 cement : 4 Sand).

Pointing on brick work with cement mortor 1:3 (1cement : 3 sand) Raised and Cut.with in all lead and lift .

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 ( 1 cement,3 sand ) over a 12 mm layer of C.M 1:3 ( 1 cement, 3 sand ) and finished neat with in all leads and lifts complete in all respect.

6 mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand)

15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand)with in all lead and lift .

20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor -2 level including arrisses,internal rounded angles,chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 ( 1 cement : 6 sand )with in all lead and lift .

Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grillswith in all lead and lift . .

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge specification 8 S.G with wire of dia 0.56 mm for doors,windows i/c bright finished black enamelled iron butt hinges with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect.

Boulder filling behind retaining wall under floor with in all leads and lifts complete in all respect.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement, 3 sand,6 graded stone aggregate 20 mm nominal size ) with in all leads and lifts complete in all respect.

Constructing coursed rubble hammer dressed "U" shape open surface drain with side wall 15 X 22 cm in cementy mortar 1:6 ( 1 cement, 6 sand ) and inside plastering with cement mortar 1:3 ( 1 cement, 3 sand ) i/c earth work and laying 10 cms cement concrete in 1:5;10 ( 1 cement,5 sand,10 graded stone aggregate 40 mm nominal size ) and 7.5 cms cement concrete 1:2:4 ( 1 cement,2 sand,4 graded stone aggregate 20 mm nominal size ) and finished with a floating coat of neat cement complete as per standard design with in all leads and lifts complete in all respect.

White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters.with in all lead and lift .

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.with in all lead and lift .

Finishing wall with water proofing cement paint of approved brand and manufacture (two coats ) brushing to give an even shade I/c cleaning of oil,dirt,dust and other foreign matters,sand papering and knotting etc.with in all leads and lifts complete in all respect.

Providing and fixing anodised MS sliding door bolts with bolts and nuts screws etc. complete.with in all lead and lift .

Providing and fixing anodised MS tower bolts ( barrel type) with screws etc. complete.with in all lead and lift .

Providing ad fixing anodised MS handles with necessary screws etc. complete.with in all lead and lift .

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink.with in all lead and lift .

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white with in all lead and lift .

Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified size in flooring cement mortar 1:6 (1cement : 6 sand) jointed with neat cement slurry. (Dark shade)with in all lead and lift .

Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.with in all lead and lift .

Providing and laying cement concrete in M 30 grade but not leaner than 1:1:2 (1 cement : 1 sand : 2 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement and reinforced concrete workwith in all lead and lift . in :-

Foundations and Plinth in all leads and lifts.

wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work with in all lead and lift . in:

Suspended floor, roofs, landings shelves and their supports balconies, beams, girders ,bressumers and cantilevers etc in all leads and lifts of any shape.

Beam cantlivers girder and lintle side and siffite of beams beam hunching cantlivers girder bressumer and lintle not exceeding 1 mtrs with in all lead and lift .

Providing & fixing precast concrete manhole cover & frame conforming to IS-12593-1988,part-I and IS 12592-1991, part-II, 560mm diameter , medium duty.with in all lead and lift .

Providing and Laying in trenches, galvenised mild steel tubes (Medium grade) tube fittings (earth work to be measured and paid for separately)with in all lead and lift .

Providing and fixingCast Iron Sluice Valves with hand wheel complete in all respect and as per the entire satisfaction of Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work including cutting,hoisting, fixing in position and applying a priming coat of red lead paint :- in gratting, framed guard bar, ladders, railing brackets and similar works.with in all lead and lift .

Manufacturing, Supplying, Fabrication and Fixing of MS Fabricated Protection Panel 750 mm x 750 mm made with MS Angle 40 x 40 x 4 mm for frame, MS Angle 30 x 30 x 3 mm for cover, MS Flat 25 x 5 mm for fixing of sliding door bolt and MS Sheet 4.00 mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle, MS Flat & MS Sheet, embedding in RCC Slab by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 x 16 mm, MS Handle 100 mm, Lock and applying a coat of red lead paint & painting two coat with steel paint (Firoza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.

1.80 metre high fencing with 2.50 metre angle iron posts 50x50x6 mm 2.50 metre centre to centre with nine horizontal lines and two diagonal of galvenised mild steel barbed wire (IS:278: 1962 type -I) weighting 9.38 Kg/ 100 metre strained and fixed to posts with 6.1 staples including cost of excavation, post, struts and straining bolts, embended in cement concrete 1:4:8 ( 1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of inlet bulk meter complete in all lead and lift and to the entir satifaction of Engineer in Charge .

Providing and fixing wire gauge for ventilator in all lead and lift .

BASANT KASHYAP