Special repair of Bldg No P-02 of 63 Engt in Army area Jodhpur

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

M & L PCC 1:4:8 type C-1 using 40 mm graded stone aggregate as in flooring,path , sub foundation etc complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement complete all as specified and directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

All as per item No 6 above but except stone complete all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to receive tiling/floor finish complete all as specified and directed.

M&L for non-skid coloured ceramic tiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 Sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

All as per item No 11 above but skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slabs of any description or any thickness in floors, roof etc laid bedded and dry complete all as specified and directed.

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set jointed and grouted in CM 1:3 complete all as specified & directed.

M & L 18 to 20 mm thick machine cut Kota stone slab flooring etc over and including 15 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and mirror polishing complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including 10 mm thick rendering in cement mortor 1:6 complete all as specified and directed.

M/L for 25mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete as in levelling of floor etc all as specified and as directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10 mm thick in CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc finished even & smooth complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M & L Flush pointing to squared rubble masonry, coursed or uncoursed in cm 1:6 complete all as specified and directed.

M&L preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper complete all as specified & directed.

Material and labour for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putti on plastered surface all as specified and directed.

M & L three coats of white wash on newly plastered surface of wall including preparation of surfaces complete all as specified and directed..

M & L three coats of white wash on newly plastered/unplastered surface of ceiling including preparation of surfaces complete all as specified and directed.

M & L one coat of white wash on old surface of wall complete all as specified and directed..

M & L one coat of white wash on old surface of ceiling complete all as specified and directed.

M & L two coats of cement base paint over a coat of white chalk on newly plastered / unplastered surface on wall including preparation of surface complete.

M & L one coat of colour wash on old surfaces including preparation complete all as specified & directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

Taking down chowkhats or frame area exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

M&L for Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

M&L for Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

M & L for mild steel framed work as in brackets etc for coller stands framed steps/stairs, chajja etc complete using MS angle iron Steel bars gusset plate incl cutting holes for cooler stand and chajja etc complete all as specified & directed .

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

S&F in repairs peg MS chromium plated peg set of five fixing with wall complete

S & F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a) and as directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Taking down old wooden/ steel window/ventilator complete.

S&F of mild steel factory made box type window with side hung shutter with glazing bar with or without cooler opening as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 all as specified

S&F of mild steel factory made box type window with side hung shutter without glazing bar with or without cooler opening as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 all as specified

S&F of mild steel factory made box type ventilator with side hung shutter with glazing bar as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 all as specified

S&F of mild steel factory made box type ventilator with side hung shutter without glazing bar as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 all as specified

S&F of aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

S&F aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S&F of mild steel butt hinges 100 mm size complete all as specified and directed.

S&F 100mm size single action door spring hinge complete all as specified and directed.

S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and directed.

S/F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.

S/F for 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed.

M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast or for filled in door frame etc and iron fixing including necessary form work all as specified.

S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed.

S&F MS with PVC coated decorative 25mm dia curtain rod with fixing brackets, knob etc as in repairs complete all as specified and directed.

M&L for powder coated Anodised aluminium frame for doors, windows , ventilators, partition, shutters with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr in charge.

Supply and fix rubber beading complete all as specified.

S & F Door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as speciied.

S&F brass body 2 levers mortice lock vertical type size 100 mm for aluminium door (as per sample) complete all as specified and directed.

M&L for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet including solvent cement and PVC frame complete all as specified and directed.

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm graded stone agg) all as directed by Engr-in-Charge.

S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised 60mm thick with 6mm top layers of ante abrasive material laid over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2.

S&F full size 6mm thick mirror of required size fixed on commercial board including all round wooden moulding complete with french spirit polish and as directed by Engr-in-Charge.

M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on brick or concrete surface complete all as specified & directed.

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.

M & L 18 to 20 mm thick machine cut one side polished granite of approved colour in kitchen plate form, shelf etc set and jointed including 20 mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge such as in steps, cooking plateformm and other similar situations complete all as specified and directed.

Taking down existing Tar-felt from RCC roof, stone roof in any thickness etc carefully including cleaning the roof surface by wire/coir brush and removing all grits, stones, fungus, moss and finally washing down with water to the entire satisfaction of Engr-in-Charge.

M & L for PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) for filling depression, junction of roof slab & parapet, curbs etc including necessary form work complete all as specified and directed.

M & L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm (Note: - WPC shall be measured and paid for seperately).

Supply only Integral water proofing compund (ISI Marked)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

M&L for point wiring complete with using 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked( Make: Havells, RR kable,KEI/ Finolex ) passing in and including PVC conduit fixed on PVC saddle and clamp (ISI Marked) with accessories fixed on surface of wall / roof / ceiling etc in sunken pressed steel terminal boxes in wall,including 3.00 mm thick plastic laminated hylem sheet and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

All as per item No 82 above but One fan point controlled by one way switch.

All as per item No 82 above but One socket outlet 3 pin 5/6 Amps on same board

All as per item No 82 above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 82 above but with using 2.5 Sq mm single core multistanded copper conductor cable and 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board .

S & F Switch piano, flush type single pole, one way 6 Amp

S & F Switch piano, flush type single pole, one way 16 Amp

S & F Socket outlet 2 in 1, 3 pin, 6A

S & F Socket outlet 3 pin, 16 Amp, flush type

S & F step fan regulator socket (white) made Anchor

M&L ceiling rose on PVC / Polycarbonate, isolated body

Fixing only LED tube light fitting 16/18/20 watt alongwith fixture. Note:- LED tube light shall be issued under sch 'B' free for fixing.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting including 7 watt LED lamps ISI marked. Note:- LED blub 7 watt shall be issued under sch 'B' free for fixing.

Fixing only bldg security light fitting 30/45 Watt LED IP-65 protection single piece pressure dia cast aluminium alloy housing high grade poweder coated finish with heat resistant toughned clear glass cover for lamp and control gear compartment with high voltage surge protection device. etc. Note:- LED Security light fitting shall be issued sch 'B' free for fixing.

Fixing only LED panel light 2 x 2 flat (recess type) Suitable for armstrong/ grid / POP ceiling complete with separate electronic driver and high brightness diffused type complete all as specified. Note:- LED panel light 2x2 flat shall be issued under sch 'B' free for fixing.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan.

M & L for sub main wiring with 6 sqmm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC conduit and making good the distrubed surface of wall incl 4 Sqmm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note: Two runs of cable 6 SQmm and one run of 4 Sqmm shall be measures as unit length.

S & F Distribution board in sheet metal Double Door with 200 Amps rated copper bus bar confirming to relevant IS 8 way. Make Legrand/ ABB/ Havells . Note: Rate are deemed to be included for flashing in wall concealed complete and making good and matching existing surface.

Supply and fix MCB, 6 Amp /16Amp/32 Amp type B Make: Havells

Supply and fix Single Pole Neutral (SPN) Type C, 63 Amp

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

chhaba construction

S. D. Construction Co.

Shri Maruti Trading Co.

S.G.ENGINEERING COMPANY

DEV INDUSTRIES

SHRI BHIKSHU ART AND CONSTRUCTION CO

RISING ELECTRICALS