Job Work for Hydraulic Excavator. (IInd Attempt)

BILL OF QUANTITIES

Signature of the Contractor Executive Engineer

BILL OF QUANTITIES Preamble

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and

are given to provide a common basis for bidding. The basis of payment will be the

actual quantities of work ordered and carried out, as measured by the Contractor

and verified by the Engineer and valued at the rates and prices tendered in the

priced Bill of Quantities, where applicable, and otherwise at such rates and prices

as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far

as it is otherwise provided under the Contract, include all constructional

plant, layout, supervision, materials, erection, maintenance, insurance, profit,

taxes and duties, together with all general risks, liabilities and obligations set out

or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed

to enter a rate or price shall be deemed to be covered by other rates and prices

entered in the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included

in the items provided in the priced Bill of Quantities, and where no Items

are provided the cost shall be deemed to be distributed among the rates and

prices entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates

or prices against each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications

for building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer,

required blasting, or the use of metal wedges and sledgehammers, or

the use of compressed air drilling for its removal, and which cannot be

extracted by ripping with a tractor of at least 150 kw with a single rear mounted

heavy dutyripper.

Signature of the Contractor Executive Engineer

BILL OF QUANTITIES

(A)Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief Quantity Unit Rate in Amount

No specification and reference to figure

book of specifications)

1 Job Work for Supply & Fitting of 1 Job 345268.00

Radiator & Oil Cooler for Hydraulic

Excavator Pr Sr. No.188 &

2 Job Work for Supply & Fitting of 1 Job 493500.00

Idler Assy. Lower & Upper Roller for

Hydraulic Excavator Pr Sr. No. 235 &

I/We am/are willing to carry out the work at………………….% above/below

percent(Shouldbe written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Signature of the Contractor Executive Engineer